Tuesday, March 14, 2017
Paradise ponders, puppy birthdays and irrational numbers...
We celebrated this morning by giving them some half-and-half with their morning kibble, and by letting them have two bananas instead of their usual one (split between four dogs). The little puppies have no idea why they got this bonanza this morning, but (trust me on this) they weren't complaining. :)
Today is also Pi Day, commemorating that most famous of irrational numbers: pi. Of course there's a web site dedicated to it, where you can find the first million digits of pi if you're looking for some reading material.
A few years ago I read a study that attempted to measure adult innumeracy in various countries around the world. There were two questions related to pi on there. The first one asked for a definition of pi. The second asked the test taker to write down as many digits of pi as he or she knew. Americans stood out for their ignorance of these. I don't remember the exact numbers any more, but it was something like 15% of Americans could define pi as the ratio of the circumference of a circle to its diameter. The average number of digits known by Americans was less than one. That means a great many Americans didn't even know that the first digit was “3”! I remember comparing those results with those from Estonia, and being appalled at the gap. The majority of Estonians could define pi, and the average number of digits was over 4. On a good day, after my morning tea, I can remember 6 or 7 digits – which makes me extraordinary for an American, and slightly above average for an Estonian.
A friend of mine, Clay M., came up with a clever and fun way to help his daughters understand pi. They baked a pizza, then cut it up into a lot of skinny slices, 20 or so. Then they arranged these slices side-by-side, alternating the pointy end up or down. This made a rough rectangle whose height was the radius of the pizza (diameter/2) and whose length was pi * radius. By simply measuring the length of the “rectangle” they could measure pi – and then they got to eat the pizza. Win!
Monday, March 13, 2017
Paradise ponders, acidic wood and big hunks of redwood edition...
Paradise ponders, acidic wood and big hunks of redwood edition... Yesterday I got a bit of a scare: I discovered that wood I'd left on my table saw's cast iron table had left big ugly black marks and rusty corrosion on it. What the hell did that? Well, the wood was redwood (4x4s) that I'm using for the stairs I'm building. It turns out that the red heartwood of redwood lumber is highly acidic – something I had no idea of until yesterday. I'd left the wood on that table for just two days, and the corrosion that developed in that short time felt like sandpaper when I ran my hands over it. Not good at all! The wood also had a terrible black stain on it, but fortunately not on a side that will be visible when I've finished the stairs. After trying various ways to remove the corrosion, I found one that worked: a combination of M1 oil, Scotch-Brite pads, and elbow grease. Two hours and some sore arms later, I had removed nearly all trace of that corrosion. The only way you can see it now is by spotting a slight discoloration when you get the light at the right angle. I put a new coat of M1 on it and called it a day. But I will never store redwood on metal again!
What I was really trying to do yesterday was to get my big redwood “landing” built. And I did! I cut up six 4x4s into eleven 44" lengths, then drilled holes in the ten butt joints for dowel pins (60 holes for 30 pins, 3 on each of the 10 butt joints). I used the jig I made yesterday to do that, and it worked fine. The first photo shows the finished glue-up in the clamps. With a piece this big, there's a danger of bowing. The easy way to minimize that is to have clamping from both the top and the bottom, which is why you see so many clamps here. There are other ways to solve this problem, too, but if you've got the clamps, this is the easy way. This morning I removed the clamps and put the two slabs (big one near the camera, small one away) up on my workbench to get ready for sanding.
I'm quite pleased with how well these turned out. First, there's no bowing at all on either slab. I'll be installing “ribs” on these before I'm finished, and that will (or should!) prevent any future bowing as well. Second, the joint mismatches are all well under 1/32", thanks to the dowel pins. This will make them easy to sand to an acceptable flatness. Well, it would be easy if I had a belt sander. I thought for sure my trusty old 4" belt sander made the trip to Utah with us, but I searched high and low for it yesterday and it's just not here. Apparently I left it in California with some of my other tools. I ordered one last night, as for work like this (which I'd like to do more of), it's an essential tool. “Like this” means “too darned wide to fit in my planer!” So work on the steps is stymied until Thursday, when I'll have the new sander...
I did have one thing go slightly wrong while gluing up that big slab. If I do something this large again, I'll be doing it in two steps to avoid the issue. Because this time I did it all in one step, by the time I got done gluing and doweling the tenth joint, the first two joints had partially hardened. It took me about 30 minutes to do all the gluing, so apparently the limit for TiteBond II glue is around 20 minutes at the 70 °F I was working in. The specs say 10 to 15 minutes, but it seems to be a tad more than that. I know from past experience that the bond will still be strong – this is more an aesthetic issue than a structural one. There is a tiny gap remaining on the first joint, and an even smaller one (nearly invisible) on the second. I worked some more glue into them to hide the issue, which I'm sure nobody but me will ever notice. Still, what I should have done is to first glue up two smaller slabs, then in a third step glue those two together. Had I done so, my working time would have been within limits for all of it...
What I was really trying to do yesterday was to get my big redwood “landing” built. And I did! I cut up six 4x4s into eleven 44" lengths, then drilled holes in the ten butt joints for dowel pins (60 holes for 30 pins, 3 on each of the 10 butt joints). I used the jig I made yesterday to do that, and it worked fine. The first photo shows the finished glue-up in the clamps. With a piece this big, there's a danger of bowing. The easy way to minimize that is to have clamping from both the top and the bottom, which is why you see so many clamps here. There are other ways to solve this problem, too, but if you've got the clamps, this is the easy way. This morning I removed the clamps and put the two slabs (big one near the camera, small one away) up on my workbench to get ready for sanding.
I'm quite pleased with how well these turned out. First, there's no bowing at all on either slab. I'll be installing “ribs” on these before I'm finished, and that will (or should!) prevent any future bowing as well. Second, the joint mismatches are all well under 1/32", thanks to the dowel pins. This will make them easy to sand to an acceptable flatness. Well, it would be easy if I had a belt sander. I thought for sure my trusty old 4" belt sander made the trip to Utah with us, but I searched high and low for it yesterday and it's just not here. Apparently I left it in California with some of my other tools. I ordered one last night, as for work like this (which I'd like to do more of), it's an essential tool. “Like this” means “too darned wide to fit in my planer!” So work on the steps is stymied until Thursday, when I'll have the new sander...
I did have one thing go slightly wrong while gluing up that big slab. If I do something this large again, I'll be doing it in two steps to avoid the issue. Because this time I did it all in one step, by the time I got done gluing and doweling the tenth joint, the first two joints had partially hardened. It took me about 30 minutes to do all the gluing, so apparently the limit for TiteBond II glue is around 20 minutes at the 70 °F I was working in. The specs say 10 to 15 minutes, but it seems to be a tad more than that. I know from past experience that the bond will still be strong – this is more an aesthetic issue than a structural one. There is a tiny gap remaining on the first joint, and an even smaller one (nearly invisible) on the second. I worked some more glue into them to hide the issue, which I'm sure nobody but me will ever notice. Still, what I should have done is to first glue up two smaller slabs, then in a third step glue those two together. Had I done so, my working time would have been within limits for all of it...
Sunday, March 12, 2017
Another sign that spring is springing...
Another sign that spring is springing... The past week's production from our solar panels. We had many weeks of zero production recently, because of snow (see 6 March, below). They've been completely free of snow for four days now; the less-than-perfect production is because of intermittent cloud cover. Soon we'll start seeing those perfect curves again, when we have our first clear days...
USPS fail...
USPS fail and medical care... No surprise in a USPS fail, right?
For years now we've routinely tracked the progress of packages shipping from Amazon to us. The vast majority of these packages ship via Fedex or UPS, and the tracking for them is easy, fast, and accurate.
But every once in a while, an Amazon seller will ship to us via USPS, no doubt to keep the cost down. Usually this is via one of the “priority mail” boxes that don't charge by weight, and the item is something heavy.
That just happened to me: a couple of woodworking clamps are headed my way, and the seller sent them by USPS last week. Four working days later, the USPS tracking number still shows “No information available”. I cannot recall even one instance in which the USPS tracking system actually worked. The items I ordered shipped on March 8th, and the USPS estimates delivery on April 24th. The first time I saw such a ridiculous estimated delivery time, I was quite alarmed – but the package actually arrived in quite the timely fashion, as have most of the others. I can only guess that the USPS sets the estimate so long so that no matter how badly the screw things up, they can still claim an “on-time” delivery.
The USPS likes to claim that they are not a government agency, and technically they are correct. However ... for any practical purpose, they really are a government agency: their subsidies, rate regulation, employment regulation, Congressional oversight, the franking privilege, etc. make them effectively one even if technically they are not.
My point is that the kind of awful service delivered by the USPS is always what we get when we let the government run something. As a veteran of the U.S. Navy, I can attest to the almost unbelievable amount of economic waste in the military. All of us know how wonderful the DMVs are, especially in the blue states (where government bureaucracies have run the furthest off the rails).
So how is this related to medical care? Like this: the progressives in this country deeply, desperately desire our healthcare to be a so-called “single payer” system, meaning that the Federal government pays for it all. The UK's NHS is their model. This is the connection, and the part I least understand: what they want is for the same “quality” of the USPS, or DMVs, to be applied to our healthcare, too! At least the damned post office won't kill me! Talk with any UK residents about their three month waits for an MRI, or their relatives who died of cancer while waiting for diagnostic tests, and you'll see our future should a single payer system ever be put in place here. What I simply cannot understand is why anyone wants this!
Who wouldn't want some effective corporate organization (Amazon, anyone?) to take over the USPS? I'd be willing to wager that the quality would go up and the price down – so long as there was competition...
For years now we've routinely tracked the progress of packages shipping from Amazon to us. The vast majority of these packages ship via Fedex or UPS, and the tracking for them is easy, fast, and accurate.
But every once in a while, an Amazon seller will ship to us via USPS, no doubt to keep the cost down. Usually this is via one of the “priority mail” boxes that don't charge by weight, and the item is something heavy.
That just happened to me: a couple of woodworking clamps are headed my way, and the seller sent them by USPS last week. Four working days later, the USPS tracking number still shows “No information available”. I cannot recall even one instance in which the USPS tracking system actually worked. The items I ordered shipped on March 8th, and the USPS estimates delivery on April 24th. The first time I saw such a ridiculous estimated delivery time, I was quite alarmed – but the package actually arrived in quite the timely fashion, as have most of the others. I can only guess that the USPS sets the estimate so long so that no matter how badly the screw things up, they can still claim an “on-time” delivery.
The USPS likes to claim that they are not a government agency, and technically they are correct. However ... for any practical purpose, they really are a government agency: their subsidies, rate regulation, employment regulation, Congressional oversight, the franking privilege, etc. make them effectively one even if technically they are not.
My point is that the kind of awful service delivered by the USPS is always what we get when we let the government run something. As a veteran of the U.S. Navy, I can attest to the almost unbelievable amount of economic waste in the military. All of us know how wonderful the DMVs are, especially in the blue states (where government bureaucracies have run the furthest off the rails).
So how is this related to medical care? Like this: the progressives in this country deeply, desperately desire our healthcare to be a so-called “single payer” system, meaning that the Federal government pays for it all. The UK's NHS is their model. This is the connection, and the part I least understand: what they want is for the same “quality” of the USPS, or DMVs, to be applied to our healthcare, too! At least the damned post office won't kill me! Talk with any UK residents about their three month waits for an MRI, or their relatives who died of cancer while waiting for diagnostic tests, and you'll see our future should a single payer system ever be put in place here. What I simply cannot understand is why anyone wants this!
Who wouldn't want some effective corporate organization (Amazon, anyone?) to take over the USPS? I'd be willing to wager that the quality would go up and the price down – so long as there was competition...
Paradise ponders, superstar mutts edition...
Paradise ponders, superstar mutts edition... So I took a few quick photos of Mako and Cabo to assuage the demon readers who are pestering me about them. Here are the superstars:
I took these before the sun rose, which is why they aren't as crisp as you'd expect. The first one is Cabo, the little girl. She has those eyes all the time, perpetually looking startled. Sometimes the lighter hair on her head stands straight up, like a little mohawk cut. The second is Mako, the big boy. At the moment I took that, he thought I had some food. The last photo shows both of them, and gives you an idea about their relative size. Despite being much smaller than Mako, Cabo holds her own in any play battle. That's mainly due to her completely ruthless nature. When they're “fighting”, she will chomp down on any part of Mako that happens to be handy – yes, including those parts. Ouch! She's also much quicker and more agile than Mako, so she'll make fast runs at him and bowl him over. Mako, on the other hand, appears to be much more polite about their battles. Sometimes he even looks offended when she does something outrageous to him, and often he looks befuddled by the sheer speed with which she does it. Despite all the mock fighting, though, these two are best buddies. They spend all day in each other's company, even when they don't have to (our yard is big).
Yesterday afternoon, our neighbors across the street (Gary and Elayne S.) called us and invited us to go to dinner with them. That was completely unexpected, but we hadn't seen them for a while, so we eagerly accepted. We ended up going to a place we'd never been before: the Logan Steakhouse, which recently began the process of turning themselves into the Copper Mill. Their web site apparently isn't operational yet. We'd read bad reviews of the steakhouse, which when combined with high prices kept us away. The reviews for the new Copper Mill were very good, though, so we'd been planning to try it out. Our outing with Gary and Elayne was the perfect time to do that. Debbie and I shared a fish & chips plate, and it was delicious – cod done perfectly, great fries, dinner rolls right out of the oven (or they sure tasted that way!), and a nice salad for Debbie. Price was modest, too. We approve!
Our conversations over dinner were mainly catching up on the past few months. Somewhere in the conversation the subject turned to our solar panels, which Gary wanted to know why we had installed. That led to a discussion about our Tesla (because the panels largely were justified by the need to charge it), which Gary and Elayne didn't know we had. It turns out that their son has been urging them to get one, and they really couldn't figure out why. That led to Gary and Elayne wanting a ride in our Tesla. Gary wanted it to be to “someplace important” :) So we're going to out with them to Maddox sometime next week. And who knows? Maybe we'll end up with our neighbor having a Tesla, too!
We bought a couple nice chunks of fresh ahi tuna from Macey's, and that's our dinner today. Yum! It's hard to beat ahi for fresh fish...
I have a new question to use in order to rule political candidates in or out. “Do you support getting rid of Daylight Saving time?” If they say “no”, they're not getting my vote...
I took these before the sun rose, which is why they aren't as crisp as you'd expect. The first one is Cabo, the little girl. She has those eyes all the time, perpetually looking startled. Sometimes the lighter hair on her head stands straight up, like a little mohawk cut. The second is Mako, the big boy. At the moment I took that, he thought I had some food. The last photo shows both of them, and gives you an idea about their relative size. Despite being much smaller than Mako, Cabo holds her own in any play battle. That's mainly due to her completely ruthless nature. When they're “fighting”, she will chomp down on any part of Mako that happens to be handy – yes, including those parts. Ouch! She's also much quicker and more agile than Mako, so she'll make fast runs at him and bowl him over. Mako, on the other hand, appears to be much more polite about their battles. Sometimes he even looks offended when she does something outrageous to him, and often he looks befuddled by the sheer speed with which she does it. Despite all the mock fighting, though, these two are best buddies. They spend all day in each other's company, even when they don't have to (our yard is big).
Yesterday afternoon, our neighbors across the street (Gary and Elayne S.) called us and invited us to go to dinner with them. That was completely unexpected, but we hadn't seen them for a while, so we eagerly accepted. We ended up going to a place we'd never been before: the Logan Steakhouse, which recently began the process of turning themselves into the Copper Mill. Their web site apparently isn't operational yet. We'd read bad reviews of the steakhouse, which when combined with high prices kept us away. The reviews for the new Copper Mill were very good, though, so we'd been planning to try it out. Our outing with Gary and Elayne was the perfect time to do that. Debbie and I shared a fish & chips plate, and it was delicious – cod done perfectly, great fries, dinner rolls right out of the oven (or they sure tasted that way!), and a nice salad for Debbie. Price was modest, too. We approve!
Our conversations over dinner were mainly catching up on the past few months. Somewhere in the conversation the subject turned to our solar panels, which Gary wanted to know why we had installed. That led to a discussion about our Tesla (because the panels largely were justified by the need to charge it), which Gary and Elayne didn't know we had. It turns out that their son has been urging them to get one, and they really couldn't figure out why. That led to Gary and Elayne wanting a ride in our Tesla. Gary wanted it to be to “someplace important” :) So we're going to out with them to Maddox sometime next week. And who knows? Maybe we'll end up with our neighbor having a Tesla, too!
We bought a couple nice chunks of fresh ahi tuna from Macey's, and that's our dinner today. Yum! It's hard to beat ahi for fresh fish...
I have a new question to use in order to rule political candidates in or out. “Do you support getting rid of Daylight Saving time?” If they say “no”, they're not getting my vote...
Saturday, March 11, 2017
Paradise ponders, dowels and maple-nut bar edition...
Paradise ponders, dowels and maple-nut bar edition... A few days ago, Michelle H. (a friend who's a member of the LDS ward that we're in) invited Debbie to an auction being put on by the Ladies' Relief Society. This auction was something completely new to us. Everyone attending (all women, I believe) filled out questionnaires. From Debbie's description of the questions on it, I think they're trying to make a measure of how good and how faithful you are. The questionnaires were scored, and the points one scored become the currency for the auction that followed. Additional points were also awarded for things like participating in the song, staying until the end of the auction, etc. Debbie ended up with a few hundred points, while others had thousands. As Debbie said, having some was better than nothing, because in the auction she bid on a couple of items and won them! She brought home two maple-nut bars and two big mason jars of homemade soup. We only have one maple-nut bar now, as I ate the other one – delicious! The soup looks fantastic: an Italian sausage soup with a tomato base and orzo. I may have some later tonight! All of the items being auctioned were homemade food items (and possibly some craft items, too). The ones that went for the most points were things like pork ribs and roast turkey – and some homemade fruit pastries from a woman well-known for her baking. Debbie also got a hearty breakfast out of the event, including samples of some of the aforementioned fruit pastries. Debbie understood fully why they fetched a high “price”! The best part of all for Debbie was that she got to meet and spend time with some of the local women. She had a blast – she was all smiles when she got home.
While she was off stuffing her face and having a great time, I managed to get the next step (literally!) of my stairs project done. I finished the drilling jig and used it to drill dowel holes in all of the faces to be glued, and I did the gluing and clamping. The first photo below shows my test of the drill jig and depth setting on the drill press. The goal was to have the hole depth be just a hair over half the length of a dowel peg, so that the same amount of the peg would be inside each piece. That worked great. The second photo shows a test fit of two pieces of the step held together just by the dowel's friction. That fitting showed no errors of over 1/32", and that I can fix by sanding. The third photo shows the little mark I made on each glued face to keep the orientation straight. One arrow points to the upper surface; the other to the end that the jig should be fit onto. The fourth photo shows the jig clamped to a step piece, ready to be drilled. The fifth photo the clamps in the process of being set up. The plastic is there to keep glue from dripping onto the workbench. Note the two scrap boards that actually touch the clamps; these spread the clamping force more evenly across the face of the boards. The last photo shows the boards all glued and clamped. I had to move the end clamps right after gluing as the tops of the boards were pulling together with all the clamps on the bottom. This will be even more of a challenge on the larger step, and I think I'm going to address that by using all eight of my pipe clamps on it: four on the bottom and four on the top. Once the glue fully dries on the first, smaller step I'm going to sand out the small misalignments. Tomorrow I'll tackle the big step!
While she was off stuffing her face and having a great time, I managed to get the next step (literally!) of my stairs project done. I finished the drilling jig and used it to drill dowel holes in all of the faces to be glued, and I did the gluing and clamping. The first photo below shows my test of the drill jig and depth setting on the drill press. The goal was to have the hole depth be just a hair over half the length of a dowel peg, so that the same amount of the peg would be inside each piece. That worked great. The second photo shows a test fit of two pieces of the step held together just by the dowel's friction. That fitting showed no errors of over 1/32", and that I can fix by sanding. The third photo shows the little mark I made on each glued face to keep the orientation straight. One arrow points to the upper surface; the other to the end that the jig should be fit onto. The fourth photo shows the jig clamped to a step piece, ready to be drilled. The fifth photo the clamps in the process of being set up. The plastic is there to keep glue from dripping onto the workbench. Note the two scrap boards that actually touch the clamps; these spread the clamping force more evenly across the face of the boards. The last photo shows the boards all glued and clamped. I had to move the end clamps right after gluing as the tops of the boards were pulling together with all the clamps on the bottom. This will be even more of a challenge on the larger step, and I think I'm going to address that by using all eight of my pipe clamps on it: four on the bottom and four on the top. Once the glue fully dries on the first, smaller step I'm going to sand out the small misalignments. Tomorrow I'll tackle the big step!
Paradise ponders, howling dogs and red-winged blackbird edition...
Paradise ponders, howling dogs and red-winged blackbird edition... Yesterday I was on the phone with Tesla several times – they were working to get my Model X fixed by the end of the day, but didn't want me to drive down there for nothing. We had a deadline at 3 pm, as that would leave us just enough time to drive down there to SLC before they closed at 5 pm (and on a Friday, of course nobody there wanted to stay late). Well, we talked right at the deadline and the tech was “very confident” he'd have it fixed by 5 pm, so we jumped in the #$%^(#@( Mercedes CLA 250 and headed down. That car made us both crazy; we couldn't wait to get back in the Model X! We made it into the service center just a few minutes before 5 pm, to see our Model X all nicely washed and being charged. When we walked in the door, a smiling Denise (their front desk person) handed me my fob, took the key for the Mercedes, and we were out the door. Zero paperwork, zero hassle. That's really hard to beat!
When I checked my email this morning, I had a “service invoice” from Tesla. I expected this to be a warranty repair, so I was really surprised and a bit alarmed by that. Turns out the invoice is for zero dollars (they really should change the name of that!), and really just served to tell me what they did. They replaced the hinges, as I'd been told, but they also replaced the actuator motor that actually moves the spoiler up and down. They also put some special lubricant on the hinges that is supposed to keep them from corroding as they did. We'll see how well that works long-term...
Debbie had made us reservations at Current Fish & Oyster, which is the first nice restaurant in SLC we've tried other than Red Iguana. It was so hard to make ourselves deliberately go someone other than Red Iguana. :) But we did it, and we were very glad: we had a fantastic meal. We started with a pair of appetizers: crab cakes and mussels. We both love crab cakes, and these were good – but as it turns out, they were the least impressive part of the meal. The mussels were simply wonderful. There were a dozen or so fat mussels, slices of an excellent chorizo (spicy Mexican sausage), and slices of a really good, doughy sourdough bread grilled in spiced butter. There was a sauce poured over the whole thing that was aromatic and full of mussel flavor. That appetizer was so good that we ordered a second one to share for dessert after our meal (really, we did!). Debbie's entree was a fish stew (first photo below), mine was roasted scallops (second photo below). Both were awesome. Mine had a carrot-ginger sauce that was so good I had to sop it all up, and a rice cake in the middle that was darned near as good as the scallops themselves. The vegetables included a new one on me: purple carrots, slightly less sweet than a normal carrot. All of those veggies were delicious. Debbie's sauce was just a bit too spicy for me (it included jalapenos), but then, I'm a spicy food wuss. I tried one of her shrimps, and it tasted like it had just come off the barbie – really good. Debbie had a glass of wine; I had their homemade ginger ale. That ginger ale, presuming that you like ginger (I love it!), will make your brains fall out. I'd go back there just for that! We shall return to Current for another meal, for sure...
Yesterday while waiting for Tesla's service, I was planning to go to the next step on my stairs project. That didn't happen, because I discovered that I'd messed up my jig: two parts that were supposed to be glued at a right angle were actually at about 80°. That wouldn't do at all! So I ripped the jig apart, re-routed the slot for the 1x6, and redid the glue job. So this morning I'm right back where I thought I was yesterday morning.
On Wednesday morning we heard the songs of red-winged blackbirds. These are our reliable harbingers of springtime, so we were very happy to see them. We have the spectacular yellow-headed blackbirds in the valley, too – but about ten miles north of us, not here, darn it. There are several dozen of them that stay near our irrigation canal, which is filled with water all summer. Usually at this time of year it's empty, but this year, with all the snow and rain, it's running about half full just from the runoff. That must make the blackbirds very happy! Soon our barn swallows will return, too. Some robins stayed through the winter, but the spring cohort is starting to arrive as well. A pair of Canadian geese landed in the field north of our house yesterday, possibly the same pair that nested in an adjacent tree last year. They were here this morning as well. Lots of bird song around the place now!
For the last few days (and in the forecast for at least the next ten days) we've had highs in the 50s and 60s. The snow is melting at a prodigious rate, both in the valley and up the mountain slopes below about 8,000' altitude. Starting in a week, the forecast calls for frost-free nights, too. Our “mud season” has begun! Many of the fields around us are largely clear of snow, and some of the alfalfa fields are already greening up. The only deep snow left on our property is the giant piles on the north side of our house, made by snow sliding off our roof, which this time of year are shaded all day long. Some of those piles are still 6' high!
This time of year the sun is rising just south of due east of our house. There is a small mountain peak in that direction from us, and that means we're in shadow in the early morning, while the valley both north and south of us is in the sun. This morning when I looked toward my neighbor to the north, his trees were brightly lit. They're all deciduous trees, so it was the branches and twigs that were lit – and he's got two weeping willows with bright yellow twigs, and a tree I don't know with bright red twigs. Both of them were striking in that bright morning light, especially as seen from the shadow I was in.
A reader (Glen B.) wrote me this morning wondering why I haven't mentioned our puppies recently. Well, there's no good reason other than my cranial density!
The two puppies, Cabo and Mako, are really not puppies any more. They're a year old, and they're starting to get their adult personalities. Cabo is much smaller than Mako – she's the smallest adult field spaniel we've had, and Mako, I'm pretty sure, is even bigger than Mo'i was. Cabo is especially affectionate. She loves to deliver kisses and ear nibbles, even while she's trying to chew a hole in Mako. Mako is also affectionate, but in a lunky sort of way that involves leaping onto you, trying to claw his way up into your arms, etc. Cabo, on the other hand, is very gentle.
The two of them sleep in crates in our kitchen at night, while Miki and Race have the run of the kitchen. In the mornings, right about eight hours after we put them up for the night, Cabo and Mako make it known that they want out. The way they do this has us laughing at them every morning. Somehow they've developed the habit of using some highly creative canine vocalizations to get us up. I think maybe they hear us laughing at them, and are encouraged by that. We've never heard dogs making sounds like they do, so it's hard for me to describe. I'm going to have to figure out a way to record them, so I can post them here. Mako, in particular, is very good at these exotic dog sounds.
Anyway, those vocalizations are my cue to get up and let them outside. But when I open the crate, the first thing they do is jump on me for attention. By the time I've let them outside and I walk back into the bedroom to take my morning shower, my face, hands, and arms are covered with dog slobber – the detritus of ten million “Good morning, papa!” dog kisses. Never fails to start my day in a cheery mood. :)
When I checked my email this morning, I had a “service invoice” from Tesla. I expected this to be a warranty repair, so I was really surprised and a bit alarmed by that. Turns out the invoice is for zero dollars (they really should change the name of that!), and really just served to tell me what they did. They replaced the hinges, as I'd been told, but they also replaced the actuator motor that actually moves the spoiler up and down. They also put some special lubricant on the hinges that is supposed to keep them from corroding as they did. We'll see how well that works long-term...
Debbie had made us reservations at Current Fish & Oyster, which is the first nice restaurant in SLC we've tried other than Red Iguana. It was so hard to make ourselves deliberately go someone other than Red Iguana. :) But we did it, and we were very glad: we had a fantastic meal. We started with a pair of appetizers: crab cakes and mussels. We both love crab cakes, and these were good – but as it turns out, they were the least impressive part of the meal. The mussels were simply wonderful. There were a dozen or so fat mussels, slices of an excellent chorizo (spicy Mexican sausage), and slices of a really good, doughy sourdough bread grilled in spiced butter. There was a sauce poured over the whole thing that was aromatic and full of mussel flavor. That appetizer was so good that we ordered a second one to share for dessert after our meal (really, we did!). Debbie's entree was a fish stew (first photo below), mine was roasted scallops (second photo below). Both were awesome. Mine had a carrot-ginger sauce that was so good I had to sop it all up, and a rice cake in the middle that was darned near as good as the scallops themselves. The vegetables included a new one on me: purple carrots, slightly less sweet than a normal carrot. All of those veggies were delicious. Debbie's sauce was just a bit too spicy for me (it included jalapenos), but then, I'm a spicy food wuss. I tried one of her shrimps, and it tasted like it had just come off the barbie – really good. Debbie had a glass of wine; I had their homemade ginger ale. That ginger ale, presuming that you like ginger (I love it!), will make your brains fall out. I'd go back there just for that! We shall return to Current for another meal, for sure...
Yesterday while waiting for Tesla's service, I was planning to go to the next step on my stairs project. That didn't happen, because I discovered that I'd messed up my jig: two parts that were supposed to be glued at a right angle were actually at about 80°. That wouldn't do at all! So I ripped the jig apart, re-routed the slot for the 1x6, and redid the glue job. So this morning I'm right back where I thought I was yesterday morning.
On Wednesday morning we heard the songs of red-winged blackbirds. These are our reliable harbingers of springtime, so we were very happy to see them. We have the spectacular yellow-headed blackbirds in the valley, too – but about ten miles north of us, not here, darn it. There are several dozen of them that stay near our irrigation canal, which is filled with water all summer. Usually at this time of year it's empty, but this year, with all the snow and rain, it's running about half full just from the runoff. That must make the blackbirds very happy! Soon our barn swallows will return, too. Some robins stayed through the winter, but the spring cohort is starting to arrive as well. A pair of Canadian geese landed in the field north of our house yesterday, possibly the same pair that nested in an adjacent tree last year. They were here this morning as well. Lots of bird song around the place now!
For the last few days (and in the forecast for at least the next ten days) we've had highs in the 50s and 60s. The snow is melting at a prodigious rate, both in the valley and up the mountain slopes below about 8,000' altitude. Starting in a week, the forecast calls for frost-free nights, too. Our “mud season” has begun! Many of the fields around us are largely clear of snow, and some of the alfalfa fields are already greening up. The only deep snow left on our property is the giant piles on the north side of our house, made by snow sliding off our roof, which this time of year are shaded all day long. Some of those piles are still 6' high!
This time of year the sun is rising just south of due east of our house. There is a small mountain peak in that direction from us, and that means we're in shadow in the early morning, while the valley both north and south of us is in the sun. This morning when I looked toward my neighbor to the north, his trees were brightly lit. They're all deciduous trees, so it was the branches and twigs that were lit – and he's got two weeping willows with bright yellow twigs, and a tree I don't know with bright red twigs. Both of them were striking in that bright morning light, especially as seen from the shadow I was in.
A reader (Glen B.) wrote me this morning wondering why I haven't mentioned our puppies recently. Well, there's no good reason other than my cranial density!
The two puppies, Cabo and Mako, are really not puppies any more. They're a year old, and they're starting to get their adult personalities. Cabo is much smaller than Mako – she's the smallest adult field spaniel we've had, and Mako, I'm pretty sure, is even bigger than Mo'i was. Cabo is especially affectionate. She loves to deliver kisses and ear nibbles, even while she's trying to chew a hole in Mako. Mako is also affectionate, but in a lunky sort of way that involves leaping onto you, trying to claw his way up into your arms, etc. Cabo, on the other hand, is very gentle.
The two of them sleep in crates in our kitchen at night, while Miki and Race have the run of the kitchen. In the mornings, right about eight hours after we put them up for the night, Cabo and Mako make it known that they want out. The way they do this has us laughing at them every morning. Somehow they've developed the habit of using some highly creative canine vocalizations to get us up. I think maybe they hear us laughing at them, and are encouraged by that. We've never heard dogs making sounds like they do, so it's hard for me to describe. I'm going to have to figure out a way to record them, so I can post them here. Mako, in particular, is very good at these exotic dog sounds.
Anyway, those vocalizations are my cue to get up and let them outside. But when I open the crate, the first thing they do is jump on me for attention. By the time I've let them outside and I walk back into the bedroom to take my morning shower, my face, hands, and arms are covered with dog slobber – the detritus of ten million “Good morning, papa!” dog kisses. Never fails to start my day in a cheery mood. :)
Friday, March 10, 2017
What's Elon done now?
What's Elon done now? Via still-stuck-in-San-Diego friend and reader Simon M.: I can fix South Australia's power network in 100 days or it's free. As Simon quipped: “You’ve got to love this guy!”
Triggered memory ... of my “plantsman” dad...
Triggered memory ... of my “plantsman” dad... Some of my favorite memories from the many trips I took with my dad are of our conversations. These conversations mostly happened in two settings: while driving (and we drove a lot, as some of our destinations were 1,500 miles from our home) and while resting in some beautiful spot on one of our hikes.
During one of those “while driving” conversations, while on the way to Santa Rosa, California, we talked about Luther Burbank. My dad and I were traveling to Santa Rosa as a sort of pilgrimage for my dad, to Burbank's old estate (now a gardens and museum). Burbank was one of my dad's botanical heroes, for lots of reasons. He died when my dad was but a little boy, but his dad visited Burbank on his epic travels to California in the early 1900s. My grandfather Earle Dilatush brought back stories and memories of that visit, and shared them with my dad. When I was a small boy, my dad kept a set of books detailing Burbank's work by his desk. All I can remember about those tomes is that they were thick (and heavy!), filled with photos and a few color plates, and all the text was completely beyond my comprehension.
So what triggered the memories that led to this post? Reading this article, link forwarded by a friend. My dad and I saw all of the plants referenced in that article on our visit that day, sometime in the mid-'90s.
Once again I'm reminded just how much I cherish those trips with my dad, and how thankful I am that Debbie and I found the money and time to make some good memories with our parents...
During one of those “while driving” conversations, while on the way to Santa Rosa, California, we talked about Luther Burbank. My dad and I were traveling to Santa Rosa as a sort of pilgrimage for my dad, to Burbank's old estate (now a gardens and museum). Burbank was one of my dad's botanical heroes, for lots of reasons. He died when my dad was but a little boy, but his dad visited Burbank on his epic travels to California in the early 1900s. My grandfather Earle Dilatush brought back stories and memories of that visit, and shared them with my dad. When I was a small boy, my dad kept a set of books detailing Burbank's work by his desk. All I can remember about those tomes is that they were thick (and heavy!), filled with photos and a few color plates, and all the text was completely beyond my comprehension.
So what triggered the memories that led to this post? Reading this article, link forwarded by a friend. My dad and I saw all of the plants referenced in that article on our visit that day, sometime in the mid-'90s.
Once again I'm reminded just how much I cherish those trips with my dad, and how thankful I am that Debbie and I found the money and time to make some good memories with our parents...
Labels:
Pater
Paradise ponders, dancing with jigs edition...
Paradise ponders, dancing with jigs edition... Our Tesla Model X is still at the service center, but I did get some news on it yesterday. The technicians there tracked the problem down to a corroded “hinge” that lets the spoiler move up and down. It's not at all clear to me how a hinge would be used to move the spoiler up-and-down on its mounting posts, but that's what they told me. There's a new hinge on order that should come in today. The techs told me that some other Model Xs have been having the same issue, so engineering is tracking it and looking for a long-term solution. It was refreshing to have such a frank and open discussion with a car manufacturer's representatives; that attitude is much appreciated by me. We're hoping to be able to return the #%(*#($ Mercedes CLA 250 today and pick up our Model X. We may have to take it back in at some later date for the long-term fix, but that's ok. We knew we were getting a version 1.0 when we pre-ordered it. :)
I did manage to get a little time in on my stairs project yesterday, and I hope I'll get some more today. I'm putting three dowels down the centerline of each 4x4 butt joint I'm making, and to get the holes precisely positioned in the opposing faces I needed a drill jig. That's what I built yesterday, from some scrap white pine 1x6 and a 2x4. The first photo shows the guide I rigged with clamps in order to route a groove in the 2x4 to insert the 1x6. The second photo shows the result. The third photo shows the 2x4s being glued to the 1x6, and the last photo the end result. This morning I'll drill the three template holes in the 1x6, and then the jig is done. I didn't really dance with it, though. :)
This exercise made me think of the day, many years ago, when it dawned on me that clamps were pretty much the center of any woodworker's universe. When I thought of a wood shop, I, like most people, thought of tools like saws, planes, hammers, etc. But now I think I could best tell you if someone was a woodworker by looking for the clamps in their shop. :) I own 28 clamps (I counted yesterday) of five distinct types, and I have 8 more arriving today (pipe clamps, for the sixth type). This isn't nearly enough; I'm pretty sure I need at least twice as many, both in number and in type. I also need a rack to store them all, as right now I just keep them in a messy pile.
I did manage to get a little time in on my stairs project yesterday, and I hope I'll get some more today. I'm putting three dowels down the centerline of each 4x4 butt joint I'm making, and to get the holes precisely positioned in the opposing faces I needed a drill jig. That's what I built yesterday, from some scrap white pine 1x6 and a 2x4. The first photo shows the guide I rigged with clamps in order to route a groove in the 2x4 to insert the 1x6. The second photo shows the result. The third photo shows the 2x4s being glued to the 1x6, and the last photo the end result. This morning I'll drill the three template holes in the 1x6, and then the jig is done. I didn't really dance with it, though. :)
This exercise made me think of the day, many years ago, when it dawned on me that clamps were pretty much the center of any woodworker's universe. When I thought of a wood shop, I, like most people, thought of tools like saws, planes, hammers, etc. But now I think I could best tell you if someone was a woodworker by looking for the clamps in their shop. :) I own 28 clamps (I counted yesterday) of five distinct types, and I have 8 more arriving today (pipe clamps, for the sixth type). This isn't nearly enough; I'm pretty sure I need at least twice as many, both in number and in type. I also need a rack to store them all, as right now I just keep them in a messy pile.
Habits and conventions...
Habits and conventions... This morning I had my usual tea and toast (Cache Crunch!) for breakfast. To get the bread out, I had to untwist the “twist-em” closure on the loaf's bag – and for the ten-millionth time, someone (presumably named Debbie :) had twisted it on “backwards”. I'd expected to twist it counter-clockwise to remove it, but instead that just wound it up some more. With the twist-em closures, you can't really discern the direction of twist by inspection, you just have to try it to figure it out. For me, it was disconcerting to discover that the closure was twisted that way – but I find it that way so often – roughly half the time – (including straight from the bakery) that it must be me that's weird.
So that got me to thinking about why I thought twisting clockwise to close the bag was the “right” way to do it. I believe it must be derived from learning how to tighten and loosen bolts, screws, and pipes. Except in the unusual case of “left-handed” threads, all of these everyday items tighten (screw in) when twisted clockwise, and loosen (screw out) when twisted counter-clockwise. I've done so much work with such devices over the years that the directionality of them is now at the subconscious level. When I do run into one with left-handed threads, it's disconcerting in precisely the same manner as that backwards twist-em. But then, thinking about that, I remembered that I've known quite a few people for whom this directionality was not so clear. Many of these people are women who have not (for reasons I'll let you speculate about) done much work with bolts, screws, and pipes.
Others, though, have life experiences more akin to mine. Just to make one example: I have a neighbor who is older than I am, and has spent his entire working life around machinery. While fixing an irrigation pipe last summer, he ran into trouble that he thought was caused by his arthritis interfering with his finger strength – he was unable to remove a 6" long nipple. He called me over to help him out. The pipe unscrewed easily, and when my neighbor saw me do it, he immediately started making fun of himself – because he'd been trying to tighten it! Fifty years of field experience with machinery, and he still didn't have the directionality of threads down pat. In fact, I discovered, he relied on a little jingle (“righty tighty, lefty loosy”) to jog his memory, but somehow he'd messed that up. He told me that he's always had trouble remembering the direction to turn bolts, etc. He's even marked his tools with arrows to help him remember.
Thinking about this apparent dichotomy (people who can or can't easily remember thread directions) got me to wondering if it might be related to dyslexia. A little googling quickly eliminated that hypothesis: dyslexia is strictly related to words (as you can see from the word's roots!), and doesn't affect any other abilities so far as I can tell from the studies I scanned. I learned thread directions so long ago that I can't recall at all whether it was difficult for me to learn. Anything you've learned so well that it's now not even raised to a conscious level is, I suspect, like that.
Might it be related to one's spatial reasoning ability? That's an area where the tests I've taken indicate I have a high ability, and it's also (feminists, avert your eyes) one where women score, on average, considerably below men. Some men, obviously, score low as well. I wonder how well this ability correlates with the ease of internalizing thread direction? Or the sense of “proper” twist-em direction? :)
So that got me to thinking about why I thought twisting clockwise to close the bag was the “right” way to do it. I believe it must be derived from learning how to tighten and loosen bolts, screws, and pipes. Except in the unusual case of “left-handed” threads, all of these everyday items tighten (screw in) when twisted clockwise, and loosen (screw out) when twisted counter-clockwise. I've done so much work with such devices over the years that the directionality of them is now at the subconscious level. When I do run into one with left-handed threads, it's disconcerting in precisely the same manner as that backwards twist-em. But then, thinking about that, I remembered that I've known quite a few people for whom this directionality was not so clear. Many of these people are women who have not (for reasons I'll let you speculate about) done much work with bolts, screws, and pipes.
Others, though, have life experiences more akin to mine. Just to make one example: I have a neighbor who is older than I am, and has spent his entire working life around machinery. While fixing an irrigation pipe last summer, he ran into trouble that he thought was caused by his arthritis interfering with his finger strength – he was unable to remove a 6" long nipple. He called me over to help him out. The pipe unscrewed easily, and when my neighbor saw me do it, he immediately started making fun of himself – because he'd been trying to tighten it! Fifty years of field experience with machinery, and he still didn't have the directionality of threads down pat. In fact, I discovered, he relied on a little jingle (“righty tighty, lefty loosy”) to jog his memory, but somehow he'd messed that up. He told me that he's always had trouble remembering the direction to turn bolts, etc. He's even marked his tools with arrows to help him remember.
Thinking about this apparent dichotomy (people who can or can't easily remember thread directions) got me to wondering if it might be related to dyslexia. A little googling quickly eliminated that hypothesis: dyslexia is strictly related to words (as you can see from the word's roots!), and doesn't affect any other abilities so far as I can tell from the studies I scanned. I learned thread directions so long ago that I can't recall at all whether it was difficult for me to learn. Anything you've learned so well that it's now not even raised to a conscious level is, I suspect, like that.
Might it be related to one's spatial reasoning ability? That's an area where the tests I've taken indicate I have a high ability, and it's also (feminists, avert your eyes) one where women score, on average, considerably below men. Some men, obviously, score low as well. I wonder how well this ability correlates with the ease of internalizing thread direction? Or the sense of “proper” twist-em direction? :)
Thursday, March 9, 2017
Unusual morning skies...
Unusual morning skies... The mountains to both our east (the Wasatch range) and west (the Wellsville range) have clouds over them this morning, and the sun is rising through a notch in the Wasatches. This caused the Wellsvilles to be very brightly lit this morning, by sunlight pouring through that notch and under the clouds on the Wasatches. These conditions don't all come together very often!
Haversine...
Haversine... Just ran across this trigonometric function in my reading this morning. I'd never heard of it before. Turns out there's a boatload of these “vestigial” trig functions. As the author of that post mentions, I learned about sine, cosine, and tangent in high school, then picked up secant, cosecant, and cotangent somewhere along the line. The rest of these I'd never heard of: versine, vercosine, coversine, covercosine, exsecant, excosecant, haversine, havercosine, hacoversine, and hacovercosine.
The reason why these functions were invented is interesting, too. It all comes down to the fact that people didn't used to have calculators or computers at their desks, and these functions, provided in tables, saved a great deal of manual computation...
The reason why these functions were invented is interesting, too. It all comes down to the fact that people didn't used to have calculators or computers at their desks, and these functions, provided in tables, saved a great deal of manual computation...
Wednesday, March 8, 2017
Paradise ponders, koa cat and bad Mercedes edition...
Paradise ponders, koa cat and bad Mercedes edition... While we were in Hawai'i last week, we stopped a couple of times at an interesting shop that we really enjoyed: The Gallery of Great Things. It's a bit of a challenge to characterize this place, as you'll see if you wander around their web site. The employees who helped us were a delight: the polar opposite of the pushy salespeople – they seemed a bit unhappy that some of the items they carry were departing. The store serves as a retail outlet for quite a large number of Hawai'ian artists of many types: painters, sculptors, tapa makers, bead artists, and many more.
There were quite a few things there that we enjoyed looking at, and some wooden items in particular that we wanted to buy. On our past visits, we never had enough money to even consider buying some of the larger wooden items that we liked. This time we could, though, and we bought two of them.
The first thing we got was a cat carved from a koa log (three view below). It stands about 3' tall and weighs about 35 pounds. I'm not quite sure what to call this style. “Abstract” doesn't seem quite right. The engineer in me wants to call this “low resolution”, since it's a bit like an image rendered in low resolution. Whatever you want to call it, we liked it a lot. The carving is nicely done, and the finish is beautifully done – smooth and pettable. :)
The carved koa bowl at right is the second piece we got. It, too, is carved from a koa log. On the right hand side the blue “streak” is a crack that was filled with crushed turquoise and epoxy. The rest of it is flawless and carved down to roughly 3/8" (10 mm) thickness. It's now the centerpiece of our dining room table.
We selected both of these while in Hawai'i, letting the gallery ship them back to us in Utah. The folks at the gallery assured us that the owner was the world's leading expert in packing fragile items for shipment to the U.S., and that they do this pretty much literally every day, so I wasn't too worried about it. We got the packages a few days ago, and I can attest to the quality of the packing job – both pieces were swaddled in so many layers of waterproofing, shock-absorbing, and protective materials that it's really hard to imagine how anything could have hurt them! And nothing had: both pieces arrived in perfect condition. They were shipped UPS Ground from Hawai'i, which, one presumes, isn't really how they were shipped. :) Each piece took just 3 business days to get here, which really seems kind of astonishing to me. The cost for shipping each piece was well under $100. The world seems to get smaller all the time...
The bad Mercedes? Well, that's got nothing to do with Hawai'i! :) This morning we drove our Tesla Model X down to Salt Lake City for the technicians to try again (second time) to repair our reluctant spoiler. It's supposed to extend and retract automatically as you drive; ours was stuck in the fully extended position. The techs couldn't estimate the time, so they arranged for a (free) loaner car. They didn't have a spare Tesla to lend us, so they rented a Mercedes CLA 250 instead. We drove that back home. We hated it. It's tiny, we feel like we're riding in a go kart, every little bump feels like someone is hammering our butts, it's noisy, and the way the engine stops and restarts every time you pause at a traffic signal is very distracting. The worst sin of all, though, is that the damned thing doesn't even have a backup camera! We had a hell of a time figuring out how to use some basic things, too, such as the radio. We were both thoroughly underwhelmed. We want our Tesla back! :) The plan is to drive back down to SLC tomorrow to get it...
There were quite a few things there that we enjoyed looking at, and some wooden items in particular that we wanted to buy. On our past visits, we never had enough money to even consider buying some of the larger wooden items that we liked. This time we could, though, and we bought two of them.
The first thing we got was a cat carved from a koa log (three view below). It stands about 3' tall and weighs about 35 pounds. I'm not quite sure what to call this style. “Abstract” doesn't seem quite right. The engineer in me wants to call this “low resolution”, since it's a bit like an image rendered in low resolution. Whatever you want to call it, we liked it a lot. The carving is nicely done, and the finish is beautifully done – smooth and pettable. :)
The carved koa bowl at right is the second piece we got. It, too, is carved from a koa log. On the right hand side the blue “streak” is a crack that was filled with crushed turquoise and epoxy. The rest of it is flawless and carved down to roughly 3/8" (10 mm) thickness. It's now the centerpiece of our dining room table.
We selected both of these while in Hawai'i, letting the gallery ship them back to us in Utah. The folks at the gallery assured us that the owner was the world's leading expert in packing fragile items for shipment to the U.S., and that they do this pretty much literally every day, so I wasn't too worried about it. We got the packages a few days ago, and I can attest to the quality of the packing job – both pieces were swaddled in so many layers of waterproofing, shock-absorbing, and protective materials that it's really hard to imagine how anything could have hurt them! And nothing had: both pieces arrived in perfect condition. They were shipped UPS Ground from Hawai'i, which, one presumes, isn't really how they were shipped. :) Each piece took just 3 business days to get here, which really seems kind of astonishing to me. The cost for shipping each piece was well under $100. The world seems to get smaller all the time...
The bad Mercedes? Well, that's got nothing to do with Hawai'i! :) This morning we drove our Tesla Model X down to Salt Lake City for the technicians to try again (second time) to repair our reluctant spoiler. It's supposed to extend and retract automatically as you drive; ours was stuck in the fully extended position. The techs couldn't estimate the time, so they arranged for a (free) loaner car. They didn't have a spare Tesla to lend us, so they rented a Mercedes CLA 250 instead. We drove that back home. We hated it. It's tiny, we feel like we're riding in a go kart, every little bump feels like someone is hammering our butts, it's noisy, and the way the engine stops and restarts every time you pause at a traffic signal is very distracting. The worst sin of all, though, is that the damned thing doesn't even have a backup camera! We had a hell of a time figuring out how to use some basic things, too, such as the radio. We were both thoroughly underwhelmed. We want our Tesla back! :) The plan is to drive back down to SLC tomorrow to get it...
Lossless compression ain't quite what it used to be!
Lossless compression ain't quite what it used to be! Way back in the dark ages of computing (I speak of the early '90s), I worked for a company that made quite a bit of money from lossless compression software (and even a little from hardware!): Stac Electronics. I wasn't one of the subject matter experts there, but I worked with them every day, and a little bit rubbed off. I've had an interest in it ever since.
So when a blog post raved about a lossless compression library I'd never heard of before (Zstandard), I went and read about it in a blog post, then off to the GitHub repository to take a look at their docs and at the API.
It's really kind of amazing what's happened in the 25 years since I was at Stac. The core LZS code at Stac had a trivial API by comparison, and the code base was vastly smaller. As with almost every kind of software, the newer things are far more complex, more sophisticated, and more capable. Even just looking at the statistical graphs is kind of mind-boggling; we didn't have nearly as complete an analysis – mostly we had “point” tests with results under just a few sets of conditions. Of course the CPUs are vastly more powerful these days, and that enables all sorts of interesting things, some of which Zstandard leverages some of those.
Sometimes I wonder if there's any such thing as simple software anymore... :)
So when a blog post raved about a lossless compression library I'd never heard of before (Zstandard), I went and read about it in a blog post, then off to the GitHub repository to take a look at their docs and at the API.
It's really kind of amazing what's happened in the 25 years since I was at Stac. The core LZS code at Stac had a trivial API by comparison, and the code base was vastly smaller. As with almost every kind of software, the newer things are far more complex, more sophisticated, and more capable. Even just looking at the statistical graphs is kind of mind-boggling; we didn't have nearly as complete an analysis – mostly we had “point” tests with results under just a few sets of conditions. Of course the CPUs are vastly more powerful these days, and that enables all sorts of interesting things, some of which Zstandard leverages some of those.
Sometimes I wonder if there's any such thing as simple software anymore... :)
Tuesday, March 7, 2017
A stunningly great support experience...
A stunningly great support experience... Those are not words I write often! :) I just got off the phone with a support agent (Debbie) at Health Equity. They are a company that provides and manages HSA accounts, a confusing topic in the first place. The health insurance that we started this year (Regence – Blue Cross/Blue Shield) uses Health Equity as a partner.
We're new to the whole thing as of January 1st, and I was trying to understand why I had a credit showing on one of my claims. It looked to me as though the claim should have a zero balance, but the Health Equity website showed a small credit on it. I first submitted a request (yesterday) via a web support page, but promptly got an email saying that I should call them, as they didn't want to put private details in an email (good security practice!). They sent me a number that was allegedly 24x7 and invited me to call.
So at around 7 am this morning, cringing in anticipation of a difficult conversation, I picked up my phone and called. After a short and easy automated routing, I was put in queue for a support agent. Within 10 seconds, Debbie picked up the phone and we started talking.
That call may be the best single telephone support interaction I have ever had.
What sticks in my mind the most is Debbie's attitude: cheery, eager to help, funny, friendly, and personable as you could imagine. She's located in Draper, Utah – just south of Salt Lake City – not northeastern Uzbekistan or Sri Lanka or whatever. English is her first language. She knows the area – she's even familiar with Paradise! Bottom line from the call: neither she nor others there understand why there's a credit on that claim. It looks to them, too, like the balance should show as zero. They were open and upfront with that; no BS was dispensed.
Kudos from this ancient manager to the folks at Health Equity that are making this happen. Support like that doesn't happen by accident...
The next time I need to call them, I certainly won't be cringing in anticipation.
Hell, I might call them if all I need is cheering up!
We're new to the whole thing as of January 1st, and I was trying to understand why I had a credit showing on one of my claims. It looked to me as though the claim should have a zero balance, but the Health Equity website showed a small credit on it. I first submitted a request (yesterday) via a web support page, but promptly got an email saying that I should call them, as they didn't want to put private details in an email (good security practice!). They sent me a number that was allegedly 24x7 and invited me to call.
So at around 7 am this morning, cringing in anticipation of a difficult conversation, I picked up my phone and called. After a short and easy automated routing, I was put in queue for a support agent. Within 10 seconds, Debbie picked up the phone and we started talking.
That call may be the best single telephone support interaction I have ever had.
What sticks in my mind the most is Debbie's attitude: cheery, eager to help, funny, friendly, and personable as you could imagine. She's located in Draper, Utah – just south of Salt Lake City – not northeastern Uzbekistan or Sri Lanka or whatever. English is her first language. She knows the area – she's even familiar with Paradise! Bottom line from the call: neither she nor others there understand why there's a credit on that claim. It looks to them, too, like the balance should show as zero. They were open and upfront with that; no BS was dispensed.
Kudos from this ancient manager to the folks at Health Equity that are making this happen. Support like that doesn't happen by accident...
The next time I need to call them, I certainly won't be cringing in anticipation.
Hell, I might call them if all I need is cheering up!
Subscribe to:
Posts (Atom)





