Paradise ponders... This morning Abby S. was over for our regular tutoring session on programming. She's learning how to write some detailed routines that involve loops, including nested loops and nested conditionals. I think I may have hurt her head a little bit :)
Early this afternoon, Debbie and I headed down to the Maddox Drive-In and had ourselves a fine lunch. It was a steak sandwich for me (and it really was a steak, not some thinly sliced stuff), and Debbie had a shrimp basket. Both very yummy! I had sarsaparilla, and Debbie had root beer – both homemade, and both excellent.
Afterwards we made a grand loop to get home. We drove north from Perry (where Maddox is) along the western front of the Wellsville Mountains, then east on State 30 toward Logan, then south on State 23 toward Wellsville. It was a pretty drive, partly through areas we'd never visited before, and that's always fun and interesting. That stretch of State 30 that we drove on had lots of safflower fields (a couple photos below) growing on dry (unirrigated) farms. It sure appears to be thriving! The plants are allowed to go to seed, then the seed is harvested and pressed for the oil.
Saturday, August 6, 2016
Friday, August 5, 2016
Paradise ponders...
Paradise ponders... Quite a bit got since yesterday afternoon on our construction projects! Late last night a heating and air conditioning guy showed up to install a heating duct for our mud room (visible in the sixth photo below). Just by happenstance our home has a floor duct alongside the front door. Our builder cut a hole in the house's rim board, and there was the duct, right there – very convenient! So we simply cut out that register transition (so now that register inside the house will not put out any warm air) and extended it with an insulated duct to a register transition on the mud room floor. We won't miss the register inside the house, as there are several other ducts nearby.
This morning, the insulation crew showed up. Two very hard-working guys had all the insulation installed in about two hours. All but the last two photos show that work. The fourth photo shows some interesting “shells” they were using. These shoot (literally, with gunpowder!) small fasteners through bats of insulation into the concrete foundation. This is how they attached the bats to the insides of the foundation walls. It was interesting to see how they handled all the little challenging details, like the ends of the joist runs. These two fellows had obviously done all of this many times – they zipped through all the work very efficiently.
Later this afternoon, our builder showed up with his son and installed the tongue-and-groove OSB sub-floor sheathing. They were interesting to watch, too – especially when it came to the funny angles in the sun room floor. They did it a far easier way than I'd have done. I would have carefully measured the outline of the rim board, and then attempted to transfer those measurements to an 8x4 piece of sheathing. They simply installed the 8x4 sheet and let it overhang. Then they traced out the actual rim board edges and sawed it off (as you can see in the last photo). Much easier! Our builder has done this a time or two, methinks. :)
This morning, the insulation crew showed up. Two very hard-working guys had all the insulation installed in about two hours. All but the last two photos show that work. The fourth photo shows some interesting “shells” they were using. These shoot (literally, with gunpowder!) small fasteners through bats of insulation into the concrete foundation. This is how they attached the bats to the insides of the foundation walls. It was interesting to see how they handled all the little challenging details, like the ends of the joist runs. These two fellows had obviously done all of this many times – they zipped through all the work very efficiently.
Later this afternoon, our builder showed up with his son and installed the tongue-and-groove OSB sub-floor sheathing. They were interesting to watch, too – especially when it came to the funny angles in the sun room floor. They did it a far easier way than I'd have done. I would have carefully measured the outline of the rim board, and then attempted to transfer those measurements to an 8x4 piece of sheathing. They simply installed the 8x4 sheet and let it overhang. Then they traced out the actual rim board edges and sawed it off (as you can see in the last photo). Much easier! Our builder has done this a time or two, methinks. :)
Another piece of paper...
Another piece of paper ... that my mom saved. It's also another one that I had no idea existed. It's a letter from the captain of the USS Long Beach, the ship I served on. My mom probably didn't realize that this was a standard form letter, hand typed by a yeoman from a template provided by the Navy Bureau of Personnel (BUPERS). The Navy did quite a few things like this, attempting in their ham-handed way to generate some good public relations through their enlistee's families. My mom also likely didn't realize that this particular event being roundly praised (my advancement to DS2) was guaranteed, conditional on my meeting minimum requirements, by the six year enlistment commitment I'd made. Part of that was fast-tracked promotion to E5 upon graduating successfully from “C” school (which I did) and passing the tests for E5 (which I also did, not long before this letter was typed up).
If you're unfamiliar with U.S. Navy enlistee designations, the “Data Systems Technician” was my rating. It was often shortened to “DS”. Basically a data systems technician was the IT guy of the day. The job was a bit different back then, though: we did relatively little on software, configuration, or administration (tasks that dominate the work today). Instead we spent most of our time doing actual electronic repair, right down to the component level. We had to be very proficient with oscilloscopes, meters, Ohm's law, soldering irons, and so on to do the job. A modern IT guy might not know any of these things, but can configure routers or administer the daylights out of a Linux system :) The “Second Class” was my rank, the Navy's term for an enlisted person at rank E5 (which means fifth from the bottom-most rank). The second class was often shortened to just “2”, and “DS2” the short form of Data Systems Technician Second Class. The short form is certainly much easier to type!
That particular captain, Captain Frank R. Fahland, was known by the crew as “Frank the fish”, mostly for the appearance of his face. May 1974 is quite shortly after I arrived on board the ship, and I'm certain that the captain had absolutely no idea who I was. The ship had a crew of 1,200 men, and he and I had never met. The boilerplate text in the letter is technically truthful, but for data systems technicians the competition wasn't all that keen – the Navy was desperate for more of them, and you had to be pretty darned bad to fail the qualifications :)
I'm afraid my mom was a bit deceived about the glory being showered on me by Frank the Fish :)
If you're unfamiliar with U.S. Navy enlistee designations, the “Data Systems Technician” was my rating. It was often shortened to “DS”. Basically a data systems technician was the IT guy of the day. The job was a bit different back then, though: we did relatively little on software, configuration, or administration (tasks that dominate the work today). Instead we spent most of our time doing actual electronic repair, right down to the component level. We had to be very proficient with oscilloscopes, meters, Ohm's law, soldering irons, and so on to do the job. A modern IT guy might not know any of these things, but can configure routers or administer the daylights out of a Linux system :) The “Second Class” was my rank, the Navy's term for an enlisted person at rank E5 (which means fifth from the bottom-most rank). The second class was often shortened to just “2”, and “DS2” the short form of Data Systems Technician Second Class. The short form is certainly much easier to type!
That particular captain, Captain Frank R. Fahland, was known by the crew as “Frank the fish”, mostly for the appearance of his face. May 1974 is quite shortly after I arrived on board the ship, and I'm certain that the captain had absolutely no idea who I was. The ship had a crew of 1,200 men, and he and I had never met. The boilerplate text in the letter is technically truthful, but for data systems technicians the competition wasn't all that keen – the Navy was desperate for more of them, and you had to be pretty darned bad to fail the qualifications :)
I'm afraid my mom was a bit deceived about the glory being showered on me by Frank the Fish :)
Labels:
Mildred
Broad Mouth Fire...
Broad Mouth Fire... This is a fire that's been giving us a smoky atmosphere for about a week now, in a fairly remote area of Box Elder County, but near the edge of Cache County (where we live). The fire currently is burning about 30 miles to our northwest, and it's burning to the south and west (which is not toward us). As I write, the fire has burned about 10,000 acres and its only 15% contained. Locals tell me that the area that's burning is mostly sage and grass, with scattered juniper and pinyon pine, and this sounds right. That's far less fuel (and therefore far less scary) than we had in the chaparral where we used to live, down in southern California.
I learned about some online fire resources in the course of researching this fire. First thing I found was the Utah Fire Info site, which, amazingly enough, is a government effort. It's quite good. That took me to another great government-generated resource: realtime fire updates via Twitter. Kudos, Utah state government! The Twitter feed took me in turn to another resource (not government): a wildfire viewer, with multiple layers of information.
I learned about some online fire resources in the course of researching this fire. First thing I found was the Utah Fire Info site, which, amazingly enough, is a government effort. It's quite good. That took me to another great government-generated resource: realtime fire updates via Twitter. Kudos, Utah state government! The Twitter feed took me in turn to another resource (not government): a wildfire viewer, with multiple layers of information.
Thursday, August 4, 2016
Ran across a piece of paper...
Ran across a piece of paper ... in my mom's things that brought back all sorts of memories...
I have no idea how my mom got this paper. It's the class scores and standing for the U.S. Navy Basic Electricity & Electronics Program (known colloquially as “BEEP” school). There are only two possibilities, realistically: either the school mailed it to her, or I gave it to her. The former, I think, is the more likely. To the best of my knowledge, mom never told me she had this. The paper is a single sheet of bond paper, with mimeographed class scores on it. For my younger readers, mimeographing was how we made copies of a document before we had copiers, and yes, I am that old. The paper is quite worn and dog-eared, and falling apart at the creases – it has obviously been folded and unfolded many times. This seems an odd artifact to garner my mom's attentions, but obviously it did.
BEEP school was a real turning point for me. It was the very first time I was ever in a class where the students were highly motivated, the subject was of great interest to me, and I had access to a first-class lab and library. I went to BEEP school in San Diego, right after getting out of boot camp. It was the first taste I had of the “real” Navy.
BEEP school, if I'm remembering correctly, had 18 “modules” of curriculum, each intended to last a week. Because BEEP school routinely enrolled students with anything from zero electronics exposure to credentialed electrical engineers, they started out each module with a test to see if you already knew the material – in which case you'd skip that module and move on to the next one. Your scores on the 18 modules were aggregated, and all who graduated in any given week were called a “class”. The class standing for each such class was then calculated and became part of your record.
At the time I took that test, in 1972, I had been a ham radio operator (with a general license) for just over 10 years. I'd been designing, building, troubleshooting, and operating radio receivers and transmitters for most of that time. I knew a thing or two about electronics, but I didn't really know how much I knew – I'd never had any way to measure myself relative to others.
The instructors at BEEP school told us that we should “test out” of as many modules as we could. Being the damned fool that I was (then), I took their advice to heart and worked my way through all 18 modules in two days. So ... instead of 18 glorious weeks in San Diego, where I could have been doing all sorts of fun things with all the free time I'd have because I already knew the material – I had just two days. Dang it! My classmates were incredulous that I could be so stupid as to blow that opportunity. They had far superior knowledge of the world's ways that I did. :)
On the other hand, I now had a measurement of my own skills in electronics compared with the other people in my class.I did very well on those module tests, well enough to be number one in my class – something that had never happened to me before. It's hard to overstate what an impact that had on me, mainly because it showed me that I could hold my own when it came to a technical subject. My further U.S. Navy schooling (these were “C” schools in Mare Island) just reinforced this confidence-building success. My instructors were very surprised when I told them that I'd had no class on electricity or electronics, being self-taught. They were also impressed that I also knew practical aspects (especially in terms of troubleshooting and, of all things, soldering). Even when they had engineers come through the school, they didn't generally have much in the way of practical experience. All of this was recognition on a level that I'd never experienced before. I was being treated with a respect that I'd never had, and that was a feeling I very much liked.
Even today, nearly 45 years later, those memories are powerful. And all brought back by a piece of paper that my mom (who didn't know anything I've written here) unaccountably had and saved...
I have no idea how my mom got this paper. It's the class scores and standing for the U.S. Navy Basic Electricity & Electronics Program (known colloquially as “BEEP” school). There are only two possibilities, realistically: either the school mailed it to her, or I gave it to her. The former, I think, is the more likely. To the best of my knowledge, mom never told me she had this. The paper is a single sheet of bond paper, with mimeographed class scores on it. For my younger readers, mimeographing was how we made copies of a document before we had copiers, and yes, I am that old. The paper is quite worn and dog-eared, and falling apart at the creases – it has obviously been folded and unfolded many times. This seems an odd artifact to garner my mom's attentions, but obviously it did.
BEEP school was a real turning point for me. It was the very first time I was ever in a class where the students were highly motivated, the subject was of great interest to me, and I had access to a first-class lab and library. I went to BEEP school in San Diego, right after getting out of boot camp. It was the first taste I had of the “real” Navy.
BEEP school, if I'm remembering correctly, had 18 “modules” of curriculum, each intended to last a week. Because BEEP school routinely enrolled students with anything from zero electronics exposure to credentialed electrical engineers, they started out each module with a test to see if you already knew the material – in which case you'd skip that module and move on to the next one. Your scores on the 18 modules were aggregated, and all who graduated in any given week were called a “class”. The class standing for each such class was then calculated and became part of your record.
At the time I took that test, in 1972, I had been a ham radio operator (with a general license) for just over 10 years. I'd been designing, building, troubleshooting, and operating radio receivers and transmitters for most of that time. I knew a thing or two about electronics, but I didn't really know how much I knew – I'd never had any way to measure myself relative to others.
The instructors at BEEP school told us that we should “test out” of as many modules as we could. Being the damned fool that I was (then), I took their advice to heart and worked my way through all 18 modules in two days. So ... instead of 18 glorious weeks in San Diego, where I could have been doing all sorts of fun things with all the free time I'd have because I already knew the material – I had just two days. Dang it! My classmates were incredulous that I could be so stupid as to blow that opportunity. They had far superior knowledge of the world's ways that I did. :)
On the other hand, I now had a measurement of my own skills in electronics compared with the other people in my class.I did very well on those module tests, well enough to be number one in my class – something that had never happened to me before. It's hard to overstate what an impact that had on me, mainly because it showed me that I could hold my own when it came to a technical subject. My further U.S. Navy schooling (these were “C” schools in Mare Island) just reinforced this confidence-building success. My instructors were very surprised when I told them that I'd had no class on electricity or electronics, being self-taught. They were also impressed that I also knew practical aspects (especially in terms of troubleshooting and, of all things, soldering). Even when they had engineers come through the school, they didn't generally have much in the way of practical experience. All of this was recognition on a level that I'd never experienced before. I was being treated with a respect that I'd never had, and that was a feeling I very much liked.
Even today, nearly 45 years later, those memories are powerful. And all brought back by a piece of paper that my mom (who didn't know anything I've written here) unaccountably had and saved...
Labels:
Mildred
Paradise ponders...
Paradise ponders... The building inspector was here this morning, and signed off on the work so far. He also did the final inspection (about a year late!) on our shed. It was actually a lot of fun to walk the inspector through – he was fascinated with all sorts of stuff, and kept making envious sounds and exclaiming things like “Wow! That’s really cool!” :) He seemed to especially like my electric hoist, that works though a hatch between the first and second floors of the shed.
The path is now clear for running the heating duct to the mud room, insulating the floor of the mud room and sun room, and installing the sub-flooring. Once the mud room's sub-floor is in place, we could actually start using our front door again. All we'd need is some sort of temporary stairway...
The path is now clear for running the heating duct to the mud room, insulating the floor of the mud room and sun room, and installing the sub-flooring. Once the mud room's sub-floor is in place, we could actually start using our front door again. All we'd need is some sort of temporary stairway...
Wednesday, August 3, 2016
Paradise ponders...
Paradise ponders... The past couple of days saw some progress on our construction projects. First the builders installed the “plates” (the greenish treated 2x4s clearly visible in the third photo). These plates are held to the concrete with lag bolts embedded in the foundation. There's actually a thin layer of special foam between the plates and the concrete; this forms a watertight seal even in the presence of slight imperfections in the surface of either the foundation or the 2x4. Next up was the “rim board” – the sheets of 1" thick OSB standing vertically on top of the plates. Finally came the joists, those marvels of engineered wood I blogged about earlier. As I write this, the mud room and sun room are finished to this stage. Tomorrow morning an inspector is due, to sign off on this stage of work. Next up: on Friday, the insulation team will be here to put R50 insulation between the joists, and in the afternoon the builders will install the OSB tongue-and-groove sub-flooring. There's a pile of 2x6s remaining from the lumber delivery. I'm guessing that these will be used for framing the mud room, but that's just a guess...
This morning I started the work on the “filling station” we're putting up, to dispense gasoline and diesel for our trucks, tractor, and various other machinery. This will be located near our driveway entrance, adjacent to the concrete apron for our outbuilding. The nozzles, filters, gauge, and hoses will all be housed in a small building there. This will be constructed of 8" cinder block, with inside dimensions of 32" wide by 16" deep. It's roof will be a single large stone slab, and the outside will be faced with rock. The inside will be taller than it looks: from 3' underground to 6' above ground; a 9' vertical span.
What I did this morning was to dig the hole for the footer and foundation for this building, and also a ditch for the gasoline and diesel pipes to be buried in. The footer (on the advice of our mason) extends a foot out from all sides; it will be a 6' x 4'8" x 8" slab of reinforced concrete with a 6" diameter drain hole in the exact center. From the footer, a wall of 8" thick reinforced concrete will rise to 6" above ground level to form the base for the cinder block. We're hoping to have all of that poured within two weeks. The hole:
The majority of that gravel and soil I dug out with my backhoe, but the “finish work” was all by hand, with a plain old shovel. In the 90°F heat, that was hard work! It didn't help a bit that the soil there is quite wet once I get down about 2'. I think that's because of the irrigation canal, which is about 50' away. Hopefully it's not a leak of some kind!
Jahar, our Savannah cat, had us a bit worried starting last night when I cleaned his litter box – and discovered it contained nothing. If you own cats, you know this is pretty weird. So this morning I hauled him off to the vet, yowling and hissing and spitting, and generally being scary pissed off. When I got him there, they (of course) wanted a weight – and tiny little Madison, a vet tech there, just reached into the carrier and hauled him out, all the while he was acting like a furry chainsaw. I'm about three times her size, but I would have hesitated much more than she did! Dr. Russell gave him the once over, and pronounced him just fine as far as she could tell – temperature normal, weight the same as last visit, bladder not full, and poop production just fine (as demonstrated while Dr. Russell was holding him :). So I brought him back home with instructions to basically just watch carefully for the next couple days. Debbie just told me that he's been eating and drinking, so maybe whatever his problem was has just resolved itself...
This morning I started the work on the “filling station” we're putting up, to dispense gasoline and diesel for our trucks, tractor, and various other machinery. This will be located near our driveway entrance, adjacent to the concrete apron for our outbuilding. The nozzles, filters, gauge, and hoses will all be housed in a small building there. This will be constructed of 8" cinder block, with inside dimensions of 32" wide by 16" deep. It's roof will be a single large stone slab, and the outside will be faced with rock. The inside will be taller than it looks: from 3' underground to 6' above ground; a 9' vertical span.
What I did this morning was to dig the hole for the footer and foundation for this building, and also a ditch for the gasoline and diesel pipes to be buried in. The footer (on the advice of our mason) extends a foot out from all sides; it will be a 6' x 4'8" x 8" slab of reinforced concrete with a 6" diameter drain hole in the exact center. From the footer, a wall of 8" thick reinforced concrete will rise to 6" above ground level to form the base for the cinder block. We're hoping to have all of that poured within two weeks. The hole:
The majority of that gravel and soil I dug out with my backhoe, but the “finish work” was all by hand, with a plain old shovel. In the 90°F heat, that was hard work! It didn't help a bit that the soil there is quite wet once I get down about 2'. I think that's because of the irrigation canal, which is about 50' away. Hopefully it's not a leak of some kind!
Jahar, our Savannah cat, had us a bit worried starting last night when I cleaned his litter box – and discovered it contained nothing. If you own cats, you know this is pretty weird. So this morning I hauled him off to the vet, yowling and hissing and spitting, and generally being scary pissed off. When I got him there, they (of course) wanted a weight – and tiny little Madison, a vet tech there, just reached into the carrier and hauled him out, all the while he was acting like a furry chainsaw. I'm about three times her size, but I would have hesitated much more than she did! Dr. Russell gave him the once over, and pronounced him just fine as far as she could tell – temperature normal, weight the same as last visit, bladder not full, and poop production just fine (as demonstrated while Dr. Russell was holding him :). So I brought him back home with instructions to basically just watch carefully for the next couple days. Debbie just told me that he's been eating and drinking, so maybe whatever his problem was has just resolved itself...
Monday, August 1, 2016
Going through mom's belongings...
Going through mom's belongings ... and I found this letter, never sent. It was one of the things I found in an envelope tucked into a corner of her purse. The envelope is practically worn out, and many of the documents have obviously been folded and unfolded many times. Several of the items in this envelope are either complete mysteries to me – mementos of some aspect of my mom's life that I don't know about – or they're big surprises. Some of those surprises I don't think I'll be sharing publicly :) Some I will probably do so at some point. This particular letter was so worn out that I had to tape together before I could scan it.
A letter to my children and grandchildren
April 27,1998
Tomorrow is the big "O" day [TD: "O" presumably means "Operation"], I go in to have surgery to give me two new knees and hopefully a new lease on a better life.
This letter is just in case something goes wrong and I do not live through this procedure. I fully expect to, but just in case I wanted to say a few things to you.
The most precious moments have been with family - husband, children and grandchildren. The joyful times we had camping stand out in my memory. Some of the candlelight dinners with Dad stand out in my memory. The first summer I took all four granddaughters up to camp is one of my most favorite memories. They are so beautiful and they got along so wonderful. Seeing the enjoyment Tami, Amber and Marci gave to the old folks at the nursing home in Lincoln has got to be on the list. Watching the little girls grow into young adulthood is almost frightening. It seemed to happen a lot faster than it did with our own children and that happened fast enough.
Watching all four of our children grow and flourish and each give to this world something wonderful. We don't have to look too far to know how special you all are and how lucky we are to have had you.
You all share what I feel is the best of both of us parents. Passing that on to friends and children will maybe do a little bit to make this earth a mite more wonderful.
You are all precious to me - you have all given wonderful meaning to my life. I love you all. I will always be with you in little ways. Hug each other - much better than fighting. Hold on to the things that are 'right' to hold onto. Don't give in or up when life seems to turn the wrong way. Always do to others the things you would like to have done to you. Always love and look out for family and friends.
When you are in Maine, play a game of cards with me in mind. Enjoy the camp as much as you are able. Enjoy your siblings and your children each and everyday. Hug each other every chance you get - hard.
Remember the good times we have had and forgive me the bad times - please. I love you all so much.
I don't know why she signed it with an “86”. I had no idea this letter existed. Finding it pretty much stopped me in my tracks for today...
Update 8/3/2016: my brother Scott knew what the “86” was all about. It seems my mom's friend (Joyce) liked to call herself “Agent 99” after a character in an old television show, and my mom called herself “Agent 86”, or just “86” for short.
Update 8/3/2016: my brother Scott knew what the “86” was all about. It seems my mom's friend (Joyce) liked to call herself “Agent 99” after a character in an old television show, and my mom called herself “Agent 86”, or just “86” for short.
Labels:
Mildred
Giving her stuff away...
Giving her stuff away... Before my mom left Virginia, she gave away many of her belongings (or arranged for them to be given away when she was gone). One of the things she gave away was her painting supplies. For quite a few years, mom took lessons and painted (in oil or acrylic, not water paints to my knowledge). Many of these paintings were gifts; others hung in her home.
She still had all the supplies until early this year, when she discovered that Hannah D., the young daughter of her neighbor in Virginia, was taking up painting. Mom gave her a big pile of supplies, including brushes, palettes, and a great collection of paint. Mom got to see the first painting that Hannah did, but not the second (above). She'd have loved this one: hummingbirds, penstemon, and lots of bright colors. And she'd especially have loved the fact that Hannah was making good use of her gift.
Thinking of you, mom. Every day...
She still had all the supplies until early this year, when she discovered that Hannah D., the young daughter of her neighbor in Virginia, was taking up painting. Mom gave her a big pile of supplies, including brushes, palettes, and a great collection of paint. Mom got to see the first painting that Hannah did, but not the second (above). She'd have loved this one: hummingbirds, penstemon, and lots of bright colors. And she'd especially have loved the fact that Hannah was making good use of her gift.
Thinking of you, mom. Every day...
Labels:
Mildred
On her recent visit with us...
On her recent visit with us, our Polish friend Jo B. left a sizeable bag of “sweets” with us as a gift: chocolate confections of various kinds, plus some wrapped caramels that were hard and crumbly, rather than soft as we're used to having caramel. The photo at right shows a couple of examples. We've really been enjoying these, but now our supply is dwindling.
So I got to wondering whether I could find these delectables on Amazon. Yes, of course! I noticed that the word “Wawel” appeared on each piece of candy, and it had the little ® after it (for registered trademark). I guessed that Wawel was a brand or maker, and searched for it in food. Voila! Lots of Wawel products available on Amazon.
Not so very many years ago, a product like this would only have been available through a specialty store (likely in a big city), or through a specialty mail-order catalog (likely one catering to Polish immigrants). It would have been a real challenge to locate a source, and the price would have been high, too (specialty stores generally have lower turnovers, and therefore must have higher profit margins – and higher prices). Today all it took was about 30 seconds of brand identification and a few keystrokes on my web browser – and now I know I can order these any time I want them, and at quite a reasonable price, too!
So I got to wondering whether I could find these delectables on Amazon. Yes, of course! I noticed that the word “Wawel” appeared on each piece of candy, and it had the little ® after it (for registered trademark). I guessed that Wawel was a brand or maker, and searched for it in food. Voila! Lots of Wawel products available on Amazon.
Not so very many years ago, a product like this would only have been available through a specialty store (likely in a big city), or through a specialty mail-order catalog (likely one catering to Polish immigrants). It would have been a real challenge to locate a source, and the price would have been high, too (specialty stores generally have lower turnovers, and therefore must have higher profit margins – and higher prices). Today all it took was about 30 seconds of brand identification and a few keystrokes on my web browser – and now I know I can order these any time I want them, and at quite a reasonable price, too!
Paradise ponders...
Paradise ponders... Yesterday I finished assembling the table and chairs that will go on our deck. These were sold through Amazon by a company called Oakland Living (a furniture wholesaler), but were manufactured in China by some company I can't identify.
You may remember that I nominated the table's assembly instructions as “worst assembly instructions evah!” Well, the assembly instructions for the chairs were possibly even worse. In particular, the chair's instructions don't tell you the proper placement of some very important parts – and if you got them wrong, you could easily damage the chair. I've seen how these “spring rocker” chairs are assembled before, so I figured it out pretty easily. I can imagine, though, that quite a few people get it wrong and end up either damaging the chair, or even hurting themselves.
I'm guessing that Oakland Living buys from many different manufacturers, so probably the instructions for all their stuff aren't quite so bad. But if they are ... watch out!
Earlier this morning, while it was still relatively cool out, I geared up to work with my steel-bladed weed whacker. I then wandered about the west side of our property, taking out teasels wherever I found them. The timing on these matter – if I were to wait too long, they'd go to seed and I'd have a bazillion more next year. If I do it too quickly, then the late-sprouting teasels escape my marauding. Today was just about right: the smallest teasels I found were about 2' high, and easy to spot. None of them were in seed yet. They're all on the ground now...
Yesterday I started going through my mom's belongings, doing a first pass on sorting it for trash, stuff to give away, stuff to send to relatives, and stuff to scan or save. It's a bigger job than I had imagined, mainly because there are so many questions to get answered. The questions range from “What the heck is this?” to “Did any of our relatives want this?” I'm leaning on my sister a lot for help with these things.
Yesterday I came across the jewelry at right. My sister tells me that these are some of my mom's favorite pieces. I'm about as far from a connoisseur of jewelry as it's possible to get (remember, I like my women naked, unpainted, and unadorned :), so I have no useful opinion about them. The women in my life are uninterested in them; they are not the style that appeals to them. And yet ... they are my mom's favorites. I'm really torn about what to do with them. I may just give them away to some of the residents at Williamsburg, where mom stayed happily, but briefly. Or maybe I'll find a way to display them, as a memento. My only plan right now is to ponder...
You may remember that I nominated the table's assembly instructions as “worst assembly instructions evah!” Well, the assembly instructions for the chairs were possibly even worse. In particular, the chair's instructions don't tell you the proper placement of some very important parts – and if you got them wrong, you could easily damage the chair. I've seen how these “spring rocker” chairs are assembled before, so I figured it out pretty easily. I can imagine, though, that quite a few people get it wrong and end up either damaging the chair, or even hurting themselves.
I'm guessing that Oakland Living buys from many different manufacturers, so probably the instructions for all their stuff aren't quite so bad. But if they are ... watch out!
Earlier this morning, while it was still relatively cool out, I geared up to work with my steel-bladed weed whacker. I then wandered about the west side of our property, taking out teasels wherever I found them. The timing on these matter – if I were to wait too long, they'd go to seed and I'd have a bazillion more next year. If I do it too quickly, then the late-sprouting teasels escape my marauding. Today was just about right: the smallest teasels I found were about 2' high, and easy to spot. None of them were in seed yet. They're all on the ground now...
Yesterday I started going through my mom's belongings, doing a first pass on sorting it for trash, stuff to give away, stuff to send to relatives, and stuff to scan or save. It's a bigger job than I had imagined, mainly because there are so many questions to get answered. The questions range from “What the heck is this?” to “Did any of our relatives want this?” I'm leaning on my sister a lot for help with these things.
Yesterday I came across the jewelry at right. My sister tells me that these are some of my mom's favorite pieces. I'm about as far from a connoisseur of jewelry as it's possible to get (remember, I like my women naked, unpainted, and unadorned :), so I have no useful opinion about them. The women in my life are uninterested in them; they are not the style that appeals to them. And yet ... they are my mom's favorites. I'm really torn about what to do with them. I may just give them away to some of the residents at Williamsburg, where mom stayed happily, but briefly. Or maybe I'll find a way to display them, as a memento. My only plan right now is to ponder...
Sunday, July 31, 2016
Stollen...
Stollen ... is a German bread made with candied or dried fruit, traditionally around Christmas-time. My mom often made Stollen for the Christmas season, and I could never get enough of the stuff. I asked her once why she made a traditional German bread, and she said “In my Scotch family, this was our tradition! The Germans must have stolen it from us!” My mother would never have stooped to a pun, so I'm sure that one was unintentional. The name “stollen” is itself German, so I'm not sure how my mom could believe it was actually of Scotch origin :) In any case, here's her recipe for her delicious stollen:
Stollen
1/4 c warm water
2 pkg yeast
pinch ground ginger
1 3/4 c milk
1 1/2 c sugar
3 eggs
1 c butter
1 box raisins
1 c walnuts chopped
grated rind 1 lemon
candied orange rind
candied lemon rind
candied pineapple
candied cherries chopped
1 1/2 t salt
1/2 t ground nutmeg
1 t lemon zest
about 7 - 8 c flour
Mix yeast with warm water and tiny amount ginger and tiny amount sugar let stand until dissolved.
Scald milk and pour over butter into a large mixing bowl. Add sugar, salt and cool until just warm. Mix in dissolved yeast, add eggs and beat well. Add other ingredients and enough flour (at slow speed on mixer) to make a medium firm dough.
Cover and let rise until doubled. Punch down and let rise again. Form into 3 long loaves - press rolling pin length wise and fold over narrow side to middle, making a kind of pocket.
Set on greased cookie sheets. Cover and let rise until doubled.
Bake at 350% oven for 45 min to 1 hour. Remove and put on racks to cool. While still warm, put lemon juice and confectioner sugar icing on top and garnish with whole candied cherries.
Paradise ponders...
Paradise ponders... Yesterday morning was busy as heck with various and sundry things.
A shipping company truck arrived to pick up the dinged desktop originally intended for Debbie's office. It's headed back to North Carolina to be planed off, refinished, and shipped back. It will ship along with Debbie's new, shorter desk – and I'll reassemble the repaired desktop with the rest of it's parts, and install it in my office.
Abby S. came over for a computer programming lesson. She's running into the first stuff that comes hard for her: the details of loops. I've got her writing a function to determine whether a number is a prime, and then optimizing it. We'll extend that over the next couple of weeks to list all the primes between 1 and n, and then to do it recursively. It will be interesting to see how her young brain absorbs recursion :)
In the afternoon Debbie and I decided to go out for dinner. We went to the Black Pearl in North Logan. I'd picked up takeout food there before, but we'd never been in to eat a sit down meal. We loved the takeout food, and yet we were surprised by how good the food there was. They have an avocado egg roll that sounded good, so we ordered one as an experiment – it was awesomely good. I had a California roll and sweet-and-sour pork, both excellent. I particularly appreciated the fact that the sweet-and-sour sauce was served on the side (without my asking!), which allowed me to use it sparingly (my preference). Debbie got Singapore rice noodles with shrimp, and she ate an impressive amount of it – so it must have been good :) We'll be adding this place to our list of good places to eat in the area, for sure!
This morning Debbie and I took our usual wildlife drive, up Blacksmith Fork Canyon and partway to Ant Flats, turning around at Miller's Ranch. We left this time well before sunrise; we didn't see any direct sun until nearly our turnaround point. We saw plenty of wildlife, but the highlight was spotting three moose (at right) just east of the dammed pond, about 1/3 of the way toward Hardware Ranch from Hyrum. The moose appeared to be a family group: an older bull, a cow, and a young bull. We saw several deer, including a doe with twin fawns (just barely still spotted). Debbie spotted a rabbit, to our memory only the second one we've ever seen in Cache Valley. Near Miller's Ranch we saw lots of birds. As we drove up, there were approximately 12 bazillion swallows perched in bushes and on fence strands right near the road. When the sun finally popped up, they joyously took off, wheeling and swooping for bugs. In the distance to our west, we spotted a pair of Sandhill Cranes, presumably the same pair we've been seeing nearly every time we come out here. This time, though, their chick was nowhere in sight. We're afraid something may have killed it. Debbie spotted a blue heron hunting alongside a holding pond, and in the same pond I spotted a large duck. A little while later, Debbie spotted six ducklings huddled between two uprights on a dock in that pond. Nice! We caught a glimpse of a kingfisher, but no cedar waxwings or dippers today...
A shipping company truck arrived to pick up the dinged desktop originally intended for Debbie's office. It's headed back to North Carolina to be planed off, refinished, and shipped back. It will ship along with Debbie's new, shorter desk – and I'll reassemble the repaired desktop with the rest of it's parts, and install it in my office.
Abby S. came over for a computer programming lesson. She's running into the first stuff that comes hard for her: the details of loops. I've got her writing a function to determine whether a number is a prime, and then optimizing it. We'll extend that over the next couple of weeks to list all the primes between 1 and n, and then to do it recursively. It will be interesting to see how her young brain absorbs recursion :)
In the afternoon Debbie and I decided to go out for dinner. We went to the Black Pearl in North Logan. I'd picked up takeout food there before, but we'd never been in to eat a sit down meal. We loved the takeout food, and yet we were surprised by how good the food there was. They have an avocado egg roll that sounded good, so we ordered one as an experiment – it was awesomely good. I had a California roll and sweet-and-sour pork, both excellent. I particularly appreciated the fact that the sweet-and-sour sauce was served on the side (without my asking!), which allowed me to use it sparingly (my preference). Debbie got Singapore rice noodles with shrimp, and she ate an impressive amount of it – so it must have been good :) We'll be adding this place to our list of good places to eat in the area, for sure!
This morning Debbie and I took our usual wildlife drive, up Blacksmith Fork Canyon and partway to Ant Flats, turning around at Miller's Ranch. We left this time well before sunrise; we didn't see any direct sun until nearly our turnaround point. We saw plenty of wildlife, but the highlight was spotting three moose (at right) just east of the dammed pond, about 1/3 of the way toward Hardware Ranch from Hyrum. The moose appeared to be a family group: an older bull, a cow, and a young bull. We saw several deer, including a doe with twin fawns (just barely still spotted). Debbie spotted a rabbit, to our memory only the second one we've ever seen in Cache Valley. Near Miller's Ranch we saw lots of birds. As we drove up, there were approximately 12 bazillion swallows perched in bushes and on fence strands right near the road. When the sun finally popped up, they joyously took off, wheeling and swooping for bugs. In the distance to our west, we spotted a pair of Sandhill Cranes, presumably the same pair we've been seeing nearly every time we come out here. This time, though, their chick was nowhere in sight. We're afraid something may have killed it. Debbie spotted a blue heron hunting alongside a holding pond, and in the same pond I spotted a large duck. A little while later, Debbie spotted six ducklings huddled between two uprights on a dock in that pond. Nice! We caught a glimpse of a kingfisher, but no cedar waxwings or dippers today...
Saturday, July 30, 2016
For the past couple of days...
For the past couple of days ... the air quality in Cache Valley has been terrible. There's also been a smoky smell in the air. We're too far from the big California fires for them to be the source, but this morning I read that the source of our bad air was wildfires in Idaho, and possibly some other nearby states.
The current fire map (hi res) shows several candidates, one NE of Boise and two in the NW corner of Wyoming...
The current fire map (hi res) shows several candidates, one NE of Boise and two in the NW corner of Wyoming...
Friday, July 29, 2016
If you know me at all...
If you know me at all ... you've probably heard me say something like “I’m not religious at all.” I don't believe in the existence of a god (or gods), but I don't like to describe myself as an atheist – there's way too much baggage that comes along with that term, especially the Dawkins-style belligerence, arrogance, and evangelism. This fellow sounds a lot like me, but he explains it mo' better...
Trimming and cooking...
Trimming and cooking... Irreproducible scientific study results are becoming more and more of a problem, especially when combined with a largely credulous population supplying the funds for these studies (through their taxes)...
Morning conjunction...
Morning conjunction... I was up before dawn this morning, and outside with the dogs. The moon was fairly high in the sky to the southeast, and very close to it (0.3° according to an astronomical events page) was a bright star: Aldebaran. It's startling to see the two bright objects in such close proximity.
The dogs didn't notice :)
The dogs didn't notice :)
Thursday, July 28, 2016
Paradise ponders...
Paradise ponders... There's some progress on our construction to report. The excavated soil has been removed from around our new foundations, and some good topsoil has been brought in to fill in some low spots. This morning, a truck drove in and dropped off the lumber for the sub-floors, I think enough for both the sun room and the mud room. Some photos below.
The joists are interesting for how they're made (see ends in the first photo below). In the bad old days, we'd have used solid fir 2x10s or maybe 2x12s (for a long enough span). Not any more. The joist of choice these days is 100% engineered wood. The web (the long vertically-oriented bit of each joist in the first photo) is OSB (Oriented Strand Board) with the chips deliberately randomly oriented. This provides a nearly ideal web, with equal strength in either tension or compression in all directions. A solid board, with its grain oriented along the length of the board, must be thicker to achieve the same strength. The flanges are made of 10-ply plywood, roughly an inch and a quarter thick. These plies are all oriented linearly, and they are all clear (free of knots). Taken together, they have the strength of a piece of perfectly clear solid wood, even though they're much longer than one would normally be able to buy clear wood. They're perfectly straight, and not prone to warping. They're also much cheaper than clear wood, as they can be made from short sections butt-jointed together (with only one layer jointed at any particular location). It's really quite ingenious how these engineered wood joists simultaneously improve quality and strength while lowering cost.
The joists are interesting for how they're made (see ends in the first photo below). In the bad old days, we'd have used solid fir 2x10s or maybe 2x12s (for a long enough span). Not any more. The joist of choice these days is 100% engineered wood. The web (the long vertically-oriented bit of each joist in the first photo) is OSB (Oriented Strand Board) with the chips deliberately randomly oriented. This provides a nearly ideal web, with equal strength in either tension or compression in all directions. A solid board, with its grain oriented along the length of the board, must be thicker to achieve the same strength. The flanges are made of 10-ply plywood, roughly an inch and a quarter thick. These plies are all oriented linearly, and they are all clear (free of knots). Taken together, they have the strength of a piece of perfectly clear solid wood, even though they're much longer than one would normally be able to buy clear wood. They're perfectly straight, and not prone to warping. They're also much cheaper than clear wood, as they can be made from short sections butt-jointed together (with only one layer jointed at any particular location). It's really quite ingenious how these engineered wood joists simultaneously improve quality and strength while lowering cost.
Healthcare insurance, part 75,992...
Healthcare insurance, part 75,992... Just finished processing a small pile of EOBs (explanations of benefits), medical bills, and statements, and I feel the need to vent.
The document tally at the moment for Debbie's injury in May stands at 57. All of these arrived in the mail; not one provider can do it electronically. Once again I found the three things (EOBs, bills, and invoices) utterly impossible to reconcile with each other. That means, of course, that I have no idea which ones are right. I have absolutely no way of telling what I should be paying. Everyone I've asked at the hospital commiserates – but can't really help either.
On the two occasions when I thought there might actually be an error (these were both with previous incidents, not Debbie's most recent injury), upon digging into them with the help of the hospital business staff we discovered items that weren't disclosed on any of the documents I received. No matter how skilled I was at dissecting EOBs, bills, and statements, I'd never have been able to figure those out on my own. What a mess! It's as though you go to the grocery store and nothing is marked with a price, plus the store just added on random charges that they didn't bother telling you about – but expected you to pay nonetheless.
This situation isn't entirely Obamacare's fault, though the reporting requirements it added certainly contributed. This all started, I think, with the standardization of insurance billing process – something that sounds good in theory, but in the end created an entire industry of “coding” (see ICD-10 codes), a nightmare mess of separate billing, and absolutely zero ability for the consumer (the patient) to select a provider based, even in part, on price. The separate billing is like something out of a bad Hollywood script – except it's reality! The last time Debbie visited her surgeon for a post-surgery followup, we received the following bills (and an allegedly matching EOB for each): the surgeon, the surgeon's office, the X-ray technician, the radiologist, the lab (for blood work), and a charge I have yet to figure out. That's twelve bills and EOBs, for a 30 minute followup visit. I have to believe there was more effort expended on the billing than on the actual visit!
What really rankles at the moment is this: because of Obamacare, I have no way to opt out of this craziness. We must participate, or be penalized (and it's a big damned penalty, too!). That doesn't feel like America to me. The government is dictating how we get our healthcare, and if I don't like it (and I don't!), I can't do anything about it. That's a system that belongs in some place like China or North Korea, not here...
The document tally at the moment for Debbie's injury in May stands at 57. All of these arrived in the mail; not one provider can do it electronically. Once again I found the three things (EOBs, bills, and invoices) utterly impossible to reconcile with each other. That means, of course, that I have no idea which ones are right. I have absolutely no way of telling what I should be paying. Everyone I've asked at the hospital commiserates – but can't really help either.
On the two occasions when I thought there might actually be an error (these were both with previous incidents, not Debbie's most recent injury), upon digging into them with the help of the hospital business staff we discovered items that weren't disclosed on any of the documents I received. No matter how skilled I was at dissecting EOBs, bills, and statements, I'd never have been able to figure those out on my own. What a mess! It's as though you go to the grocery store and nothing is marked with a price, plus the store just added on random charges that they didn't bother telling you about – but expected you to pay nonetheless.
This situation isn't entirely Obamacare's fault, though the reporting requirements it added certainly contributed. This all started, I think, with the standardization of insurance billing process – something that sounds good in theory, but in the end created an entire industry of “coding” (see ICD-10 codes), a nightmare mess of separate billing, and absolutely zero ability for the consumer (the patient) to select a provider based, even in part, on price. The separate billing is like something out of a bad Hollywood script – except it's reality! The last time Debbie visited her surgeon for a post-surgery followup, we received the following bills (and an allegedly matching EOB for each): the surgeon, the surgeon's office, the X-ray technician, the radiologist, the lab (for blood work), and a charge I have yet to figure out. That's twelve bills and EOBs, for a 30 minute followup visit. I have to believe there was more effort expended on the billing than on the actual visit!
What really rankles at the moment is this: because of Obamacare, I have no way to opt out of this craziness. We must participate, or be penalized (and it's a big damned penalty, too!). That doesn't feel like America to me. The government is dictating how we get our healthcare, and if I don't like it (and I don't!), I can't do anything about it. That's a system that belongs in some place like China or North Korea, not here...
Wednesday, July 27, 2016
A young friend of ours...
A young friend of ours ... just got back from a trip with his wife that included a swing through Croatia (specifically, Zagreb and Zadar). As we talked about it, I discovered that he had no idea that there had been a recent war in the area, and that not far from the cities he visited, NATO (primarily American) forces bombed Serb forces. He and his wife found the people there friendly and welcoming, which I was very glad to hear.
But it got me to pondering...
I wonder if my perception is accurate – that on average, younger Americans today have much less historical context than I did at their age. It surely seems that way to me, but I have little way to gauge that. My friend's joking excuse is that he wasn't really sentient at the time, which is really a way of saying that he never saw it on the news, so for him it didn't actually happen. That is so different than my own historical context, which was acquired nearly entirely by reading.
Makes me wonder if it's just that I'm weird (something that I'm well aware of :), or has something in our culture changed – to make it even harder for us to learn from history. After all, if you never even heard about events like the Bosnian War, how can you learn from them?
And then inevitably my pondering leads down a path that leads to me despairing about low information American voters...
But it got me to pondering...
I wonder if my perception is accurate – that on average, younger Americans today have much less historical context than I did at their age. It surely seems that way to me, but I have little way to gauge that. My friend's joking excuse is that he wasn't really sentient at the time, which is really a way of saying that he never saw it on the news, so for him it didn't actually happen. That is so different than my own historical context, which was acquired nearly entirely by reading.
Makes me wonder if it's just that I'm weird (something that I'm well aware of :), or has something in our culture changed – to make it even harder for us to learn from history. After all, if you never even heard about events like the Bosnian War, how can you learn from them?
And then inevitably my pondering leads down a path that leads to me despairing about low information American voters...
Subscribe to:
Posts (Atom)





