Wednesday, January 9, 2013
Domino...
Oatmeal's latest comic; a story about a cat named Domino. It's a sad story with a happy ending...
The Art of the Rant...
When it comes to producing collectible rants, few living authors can match Megan McArdle. She's just published another fine one, this time on the (apparently dead serious) proposal by some Democrats (and their fanboys) to mint a few trillion dollar platinum coins and use them to pay off the national debt. An excerpt from Megan's beautiful rant on the subject:
The Great Platinum Coin Caper is everything that is wrong with Washington: a stupid partisan maneuver that erodes the institutions of our government for no gain other than an immediate political win. The only good thing that can be said about it is that the President seems to be too sensible to actually consider doing it. Nonetheless, the fact that intelligent people like Professor Krugman are even discussing this debacle, much less endorsing it, is a depressing reminder of just how nasty and short-sighted our nation’s capital has become.That last sentence is my quote of the day. You will most definitely want to go read the whole beautiful thing!
When I was reporting on Wall Street, I used to be told with some regularity that government was needed to counteract the short-term thinking of the business sector, who never thought much beyond the next quarterly earnings report. This now seems as quaintly adorable as picture hats and daily milk deliveries. An ADHD day trader with a cocaine habit and six months to live has considerably more long-term planning skills than our current congress.
Officers vs. Enlisted, Part 38,205...
For the record, I was an enlisted man in the U.S. Navy. I was not an officer. Via reader Jim M.:
A new Marine Captain was assigned to an outfit in a remote post in the Afghanistan Desert . During his first inspection of the outfit, he noticed a Camel hitched up behind the mess tent.
He asks the Sergeant why the camel is kept there.
The nervous sergeant said, ‘Well sir, as you know, there are 250 men here on the post and no women. And sir, sometimes the men have ‘urges’. That’s why we have Molly The Camel.’
The Captain says, ‘I can’t say that I condone this, but I understand about ‘urges’, so the camel can stay.’
About a month later, the Captain starts having his own ‘urges’. Crazy with passion, he asks the Sergeant to bring the camel to his tent. Putting a ladder behind the camel, the Captain stands on the ladder, pulls his pants down and has wild, insane sex with the camel. When he’s done, he asks the Sergeant,’Is that how the men do it?’
‘Not really, sir. They usually just ride the camel into town. Where the girls are.’
On What Planet Does This Make Sense?
On Planet California, of course. The Reader's Digest version:
An attorney works for a law firm with many attorneys. He steals money from one of the law firm's clients. The law firm fires him. The fired lawyer tries to collect unemployment benefits, which by law are not paid to people fired for “cause”. The California Employment Development Department, or EDD (the bureaucracy that makes these decisions) rules that the attorney can collect unemployment benefits – because the law firm in question did not have an explicit, written policy forbidding stealing from customers.
I'm not kidding. This really happened. Actually, it happens every day – I can't recall a case where the California EDD ever ruled against an employee.
We're doomed.
Much more here, courtesy of CoyoteBlog...
An attorney works for a law firm with many attorneys. He steals money from one of the law firm's clients. The law firm fires him. The fired lawyer tries to collect unemployment benefits, which by law are not paid to people fired for “cause”. The California Employment Development Department, or EDD (the bureaucracy that makes these decisions) rules that the attorney can collect unemployment benefits – because the law firm in question did not have an explicit, written policy forbidding stealing from customers.
I'm not kidding. This really happened. Actually, it happens every day – I can't recall a case where the California EDD ever ruled against an employee.
We're doomed.
Much more here, courtesy of CoyoteBlog...
Labels:
California,
Doom
Nest...
Yesterday we received our new thermostat, called a “Nest”, 2nd generation. Ours is just like the photo at right. We bought it to replace a roughly 10 year old thermostat we'd purchased from a now-defunct home automation company. Our old thermostat had a very conventional display and controls, which means it was very difficult to use, along the same lines as modern electronic watches. It did have the ability to “talk” on the network, but the software for it was just awful, and only worked on Windows.
I'd heard about the Nest thermostat some months ago from a colleague. I figured I'd wait until the bugs had been worked out (and there are inevitably bugs!), and until some reviews came in. Last week I heard about the second generation version, which I could reasonably hope worked out some bugs from the first generation. Also I found some reviews, which ranged from merely positive to all-out fanboy ravings. So I took the plunge and ordered it.
A slight aside: a frequent comment I see about the Nest is that it's expensive – and at $250, compared to a $40 or $50 conventional electronic thermostat, it is. But really that's about like comparing a bicycle with a Toyota – you're not talking about the same kind of device at all. I don't know about you, but I expect to pay more for the Toyota than for the bicycle (though there are some darned expensive bicycles these days!). Clearly there is more cost in the Toyota, and for most of my travel needs, much more benefit. So I'm willing to pay extra for it. Ditto with a thermostat. It's something that I use at least twice each and every day, and it controls something expensive to run, so I'm willing to pay a little more for it. And just for comparison purposes, at $250, the Nest was less than half the price I paid for our previous thermostat!
Yesterday afternoon I set off to install the Nest. When I opened the box, the first thought I had was “Apple!”. That is, the packaging looked like something you'd buy from Apple, right down to the choices in packing materials. The presentation was a little work of art, just like opening a box from Apple. Someone paid close attention even to this detail.
What was in the box surprised me (I hadn't read anything at all about installing the Next prior to buying it). First surprise: it comes with a quite nice little screwdriver, with an ergonomic handle and a magnetically secured dual flat blade/Phillips head screwdriver – the only tool I needed to install it. Nice! Second surprise: the installation booklet came with a set of wire labels, so that I could label all the old wires before removing them. This is a very nice detail, and I'm sure it saves them a lot of time on support calls. Third surprise: it comes with an assortment of mounting adapters that will let you mount the Nest in any circumstance I can imagine. In our case, our old thermostat was (much) larger than the Nest, so we had a big, rectangular hole in the wall. No problem; the Nest's box includes a white plastic plate designed to handle this precise issue. Nice, Nest.
It took me perhaps five minutes to remove my old thermostat and label the old wires. Then perhaps another five minutes to install the Nest's base plate and connect the (labeled!) wires to it. Then I snapped in the actual Nest. The installation instructions basically end at this point, with a sentence that tells you to follow the on-screen directions to finish setting up the Nest. There's a web URL in case you get in trouble, but otherwise, that's it.
So when my Nest powered up, I really didn't know what to expect. I was actually a bit surprised at this point, as I expected to have to first attach the Nest to my computer to set it up (I could see the micro-USB port on its bottom). But the installation booklet made it clear that the setup was performed through the Nest itself. The reason this surprised me is that the Nest's “user interface” is pretty darned basic: you can twist it clockwise or counter-clockwise, and you can push it to “click” it – but that's it. No more user interface! So I wondered how on earth I would, say, enter my WiFi password?
The answer delighted me, in fact I laughed out loud (which quite amused Debbie). When you get to the point where you need to enter information, the Nest's display shows a circle of possibilities (such as the letters of the alphabet). Then you just twist the Nest to select the one you want, and push it to “click” and select it. That's it! It took me no more than five more minutes to get it connected to our WiFi and to handle the other bits of its setup.
There was one little scary bit, though. During the setup, there is a stage where the Nest tells you what sort of equipment it detected. In our home we have both a heater and an air conditioner, but the Nest reported only finding an air conditioner. In our case we have five wires connected to our thermostat, and I made the connections blindly following their directions – I had no idea which wire did what. I remembered that when I installed our old thermostat, I basically had to reverse-engineer our heating and cooling system to figure out precisely what each wire did, then figure out which of the numerous terminals on the thermostat to connect them to. I recall that it took me several tries to get it working. Naturally, that got me imagining that I was about to go through the same thing again.
But first I thought I'd double-check that I'd actually installed the wires correctly. So I pulled the Nest off it's mount and looked at my wiring job. Oops! The white wire wasn't actually in its little socket! I pushed it into place and secured it, popped the Nest back on, and voila! A little screen came up telling me that the Nest had detected an equipment change – and that now I had both a heater and an air conditioner. Yay!
Next, I went to Nest's web site and registered my Nest. That allows me to control my Nest from any web browser. Sweet! Then I went to the Apple app store, and downloaded the free Nest app – and now I can control my Nest from my iPhone. Super sweet! And all that took me another five minutes, tops. The Nest people have made this a very painless process.
I don't have much experience with actually using the Nest yet. I can report that it does the things you'd expect a thermostat to do (turn the heater on when it's too cold, turn the air conditioner on when its too hot), but I can't report on the Nest's vaunted learning features yet. That will take a few weeks, as the Nest builds its knowledge of our habits. What I can report on is what the geeks would call the “user interface” – what it's like for a human to actually use the thing. Our Nest is mounted in our hallway, and we're finding the user interface to be as natural and simple as an old-fashioned mechanical thermostat. The main thing one needs to do with a thermostat is to set the desired temperature, and on the Nest you do that by turning the dial. It feels very natural, very simple. There are separate set points for the heater and the air conditioner, and switching between them is just a click. Again, simple and natural. The fancier features are available from a menu, and while that's not quite as simple as setting the temperature, it's darned close. Best of all: you don't need to remember anything all, as the screen provides all the reminders anyone would need.
I've left out one of our favorite features of the Nest's user interface: it detects your presence in front of it, and turns its screen on. That's a very simple idea, but one that delights both of us.
Compared with our old thermostat, the Nest's user interface is spectacularly usable – but that's mostly a statement about how bad the old one was :)
The web site and iPhone apps are not quite as impressive. They're fine, and easy enough to use – they just didn't delight me in the same way the Nest itself did. In particular, the iPhone app doesn't let you use rotation the same way the Nest itself does. I'd love to be able to move a set point by dragging it around the dial with my finger, but I can't – instead, I have to “click” on an up or down button. Perfectly functional, but not the same experience as the Nest. I can imagine that some might actually find it confusing, simply because it's different than the Nest itself. But the fact that I can now check – and change – my thermostat from anywhere at all, any time at all, more than makes up for my picky complaints about the iPhone user interface!
Bottom line: two thumbs up for the Nest...
I'd heard about the Nest thermostat some months ago from a colleague. I figured I'd wait until the bugs had been worked out (and there are inevitably bugs!), and until some reviews came in. Last week I heard about the second generation version, which I could reasonably hope worked out some bugs from the first generation. Also I found some reviews, which ranged from merely positive to all-out fanboy ravings. So I took the plunge and ordered it.
A slight aside: a frequent comment I see about the Nest is that it's expensive – and at $250, compared to a $40 or $50 conventional electronic thermostat, it is. But really that's about like comparing a bicycle with a Toyota – you're not talking about the same kind of device at all. I don't know about you, but I expect to pay more for the Toyota than for the bicycle (though there are some darned expensive bicycles these days!). Clearly there is more cost in the Toyota, and for most of my travel needs, much more benefit. So I'm willing to pay extra for it. Ditto with a thermostat. It's something that I use at least twice each and every day, and it controls something expensive to run, so I'm willing to pay a little more for it. And just for comparison purposes, at $250, the Nest was less than half the price I paid for our previous thermostat!
Yesterday afternoon I set off to install the Nest. When I opened the box, the first thought I had was “Apple!”. That is, the packaging looked like something you'd buy from Apple, right down to the choices in packing materials. The presentation was a little work of art, just like opening a box from Apple. Someone paid close attention even to this detail.
What was in the box surprised me (I hadn't read anything at all about installing the Next prior to buying it). First surprise: it comes with a quite nice little screwdriver, with an ergonomic handle and a magnetically secured dual flat blade/Phillips head screwdriver – the only tool I needed to install it. Nice! Second surprise: the installation booklet came with a set of wire labels, so that I could label all the old wires before removing them. This is a very nice detail, and I'm sure it saves them a lot of time on support calls. Third surprise: it comes with an assortment of mounting adapters that will let you mount the Nest in any circumstance I can imagine. In our case, our old thermostat was (much) larger than the Nest, so we had a big, rectangular hole in the wall. No problem; the Nest's box includes a white plastic plate designed to handle this precise issue. Nice, Nest.
It took me perhaps five minutes to remove my old thermostat and label the old wires. Then perhaps another five minutes to install the Nest's base plate and connect the (labeled!) wires to it. Then I snapped in the actual Nest. The installation instructions basically end at this point, with a sentence that tells you to follow the on-screen directions to finish setting up the Nest. There's a web URL in case you get in trouble, but otherwise, that's it.
So when my Nest powered up, I really didn't know what to expect. I was actually a bit surprised at this point, as I expected to have to first attach the Nest to my computer to set it up (I could see the micro-USB port on its bottom). But the installation booklet made it clear that the setup was performed through the Nest itself. The reason this surprised me is that the Nest's “user interface” is pretty darned basic: you can twist it clockwise or counter-clockwise, and you can push it to “click” it – but that's it. No more user interface! So I wondered how on earth I would, say, enter my WiFi password?
The answer delighted me, in fact I laughed out loud (which quite amused Debbie). When you get to the point where you need to enter information, the Nest's display shows a circle of possibilities (such as the letters of the alphabet). Then you just twist the Nest to select the one you want, and push it to “click” and select it. That's it! It took me no more than five more minutes to get it connected to our WiFi and to handle the other bits of its setup.
There was one little scary bit, though. During the setup, there is a stage where the Nest tells you what sort of equipment it detected. In our home we have both a heater and an air conditioner, but the Nest reported only finding an air conditioner. In our case we have five wires connected to our thermostat, and I made the connections blindly following their directions – I had no idea which wire did what. I remembered that when I installed our old thermostat, I basically had to reverse-engineer our heating and cooling system to figure out precisely what each wire did, then figure out which of the numerous terminals on the thermostat to connect them to. I recall that it took me several tries to get it working. Naturally, that got me imagining that I was about to go through the same thing again.
But first I thought I'd double-check that I'd actually installed the wires correctly. So I pulled the Nest off it's mount and looked at my wiring job. Oops! The white wire wasn't actually in its little socket! I pushed it into place and secured it, popped the Nest back on, and voila! A little screen came up telling me that the Nest had detected an equipment change – and that now I had both a heater and an air conditioner. Yay!
Next, I went to Nest's web site and registered my Nest. That allows me to control my Nest from any web browser. Sweet! Then I went to the Apple app store, and downloaded the free Nest app – and now I can control my Nest from my iPhone. Super sweet! And all that took me another five minutes, tops. The Nest people have made this a very painless process.
I don't have much experience with actually using the Nest yet. I can report that it does the things you'd expect a thermostat to do (turn the heater on when it's too cold, turn the air conditioner on when its too hot), but I can't report on the Nest's vaunted learning features yet. That will take a few weeks, as the Nest builds its knowledge of our habits. What I can report on is what the geeks would call the “user interface” – what it's like for a human to actually use the thing. Our Nest is mounted in our hallway, and we're finding the user interface to be as natural and simple as an old-fashioned mechanical thermostat. The main thing one needs to do with a thermostat is to set the desired temperature, and on the Nest you do that by turning the dial. It feels very natural, very simple. There are separate set points for the heater and the air conditioner, and switching between them is just a click. Again, simple and natural. The fancier features are available from a menu, and while that's not quite as simple as setting the temperature, it's darned close. Best of all: you don't need to remember anything all, as the screen provides all the reminders anyone would need.
I've left out one of our favorite features of the Nest's user interface: it detects your presence in front of it, and turns its screen on. That's a very simple idea, but one that delights both of us.
Compared with our old thermostat, the Nest's user interface is spectacularly usable – but that's mostly a statement about how bad the old one was :)
The web site and iPhone apps are not quite as impressive. They're fine, and easy enough to use – they just didn't delight me in the same way the Nest itself did. In particular, the iPhone app doesn't let you use rotation the same way the Nest itself does. I'd love to be able to move a set point by dragging it around the dial with my finger, but I can't – instead, I have to “click” on an up or down button. Perfectly functional, but not the same experience as the Nest. I can imagine that some might actually find it confusing, simply because it's different than the Nest itself. But the fact that I can now check – and change – my thermostat from anywhere at all, any time at all, more than makes up for my picky complaints about the iPhone user interface!
Bottom line: two thumbs up for the Nest...
Labels:
Automation,
Home,
Product Review
Tuesday, January 8, 2013
Oops: Sun Spot Count Unexpectedly Low – Again......
Solar scientists have various models aimed at predicting the variabilities in the sun's luminance (or irradiance, the sun's total energy output). The main (though not the only) variable is related to sunspot count – somewhat counter-intuitively, the lower the sunspot count, the lower the sun's luminance. Skeptics of anthropogenic global warming (AGW), myself included, have pointed out the close correlation between the sun's luminance and temperatures in the Earth's atmosphere. In particular, the rising temperatures seen in the '90s and early '00s exactly corresponded with higher sunspot counts (and higher solar luminance). Recent mainstream climatology studies have, somewhat obliquely, found the same thing.
So it is of great interest to AGW skeptics to note that the more recent lack of a warming trend in Earth's atmospheric temperature correlates rather well with a lack of sunspots – the sunspot counts are coming in consistently well below the predictions by the solar scientists' models. Besides providing yet another really nice example of models gone horribly wrong, this also provides more support for the skeptic's hypothesis that the primary driver of “global warming” isn't greenhouse gases at all, but rather solar luminance.
The latest solar luminance numbers from NASA are plotted at right, with the dots being the actual data and the blue curve the smoothed equivalent. The green curves are the predictions (from 2007) of the two main families of solar luminance models, each with their cadre of solar science supporters (there were also a few solar scientists who thought both models were bunk). The red curve is a revised model, published in 2009 at which point it was quite clear that both original models were way off. The 2009 model isn't faring much better.
Robert Zimmerman, who collected and published this data, says:
So it is of great interest to AGW skeptics to note that the more recent lack of a warming trend in Earth's atmospheric temperature correlates rather well with a lack of sunspots – the sunspot counts are coming in consistently well below the predictions by the solar scientists' models. Besides providing yet another really nice example of models gone horribly wrong, this also provides more support for the skeptic's hypothesis that the primary driver of “global warming” isn't greenhouse gases at all, but rather solar luminance.
The latest solar luminance numbers from NASA are plotted at right, with the dots being the actual data and the blue curve the smoothed equivalent. The green curves are the predictions (from 2007) of the two main families of solar luminance models, each with their cadre of solar science supporters (there were also a few solar scientists who thought both models were bunk). The red curve is a revised model, published in 2009 at which point it was quite clear that both original models were way off. The 2009 model isn't faring much better.
Robert Zimmerman, who collected and published this data, says:
Meanwhile, on January 2 the solar scientists at the Marshall Space Flight Center once again lowered their prediction for the upcoming solar maximum, dropping their predicted peak sunspot number from 72 to 69. This is the fifth month in a row that they have changed their prediction, and the fourth in a row in which they have dropped it. Considering that we are now only a few months from when they say maximum should occur, their constant revision of their prediction suggests they really haven’t the faintest idea what causes the solar cycle, and are merely guessing at what they think will happen.I agree. They haven't a clue. I wish they would just admit the mystery and get to work solving it!
Labels:
Anthropogenic Global Warming,
Skeptic,
Sun,
Sunspots
Monday, January 7, 2013
Reaction Engines' Pre-Cooler...
A fascinating technological development, passed along by friend, neighbor, and reader Dick F. The video is a bit hyperbolic (they are looking for investors :), but the technology and its potential are fascinating nonetheless.
If you're not familiar with the challenges of jet engines at high speeds, you might be surprised to find that one of the most difficult challenges is heat – not from the combustion of fuel, but rather from the compression of the air being rammed into the front of the engine. The pre-cooler developed by Reaction Engines is aimed at solving that challenge. If they pull it off, hypersonic passenger aircraft traveling at 5,000 km/hour (3,000 miles/hour) are almost certainly in our future. I don't know about you, but personally I love the idea of traveling from San Diego to London in 90 minutes or so...
If you're not familiar with the challenges of jet engines at high speeds, you might be surprised to find that one of the most difficult challenges is heat – not from the combustion of fuel, but rather from the compression of the air being rammed into the front of the engine. The pre-cooler developed by Reaction Engines is aimed at solving that challenge. If they pull it off, hypersonic passenger aircraft traveling at 5,000 km/hour (3,000 miles/hour) are almost certainly in our future. I don't know about you, but personally I love the idea of traveling from San Diego to London in 90 minutes or so...
Labels:
Awesome,
Technology
An Environmentalist Discovers Science...
Fascinating speech via reader and friend Doug W., who says:
Transcript (a little different than the actual speech) available here...
I have never been quite sure what to think about the GM food scare, but in general my BS detectors were vibrating. Fascinating. Of course, his climate change stuff is still off, but it’s still worth a listen.
Transcript (a little different than the actual speech) available here...
Labels:
Environmentalism,
Revelation,
Science
Worst Recession Ever...Gets Even Worse...
I've posted this chart before; this is just another in a series of updates to it. It gets more terrifying the more time goes by...
Labels:
Economics,
Infographic,
Recession
Q & A...
The question:
If someone from the 1950s suddenly appeared today, what would be the most difficult thing to explain to them about life today?The best answer (awesome++):
To expand on the while there are a lot of obvious differences between now and 1950 in terms of technology, culture, etc., I wonder which changes or new things they'd grasp easily and which would be utterly perplexing.
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at pictures of cats and get in arguments with strangers.
Labels:
Awesome,
History,
Humor,
Technology
Sunday, January 6, 2013
Tolkien...
Christopher Tolkien is not happy about the Lord of the Rings movies, and anticipates the worst from The Hobbit. The word “eviscerated” is used...
Labels:
Tolkien
Bet You Didn't Know These Were Visible!
Dave Carter, writing at Ricochet has a post that starts like this:
How can you not love a post that starts by discussing the phenomenon of visible cow farts (which I have observed myself)? Mr. Carter is hands-down my favorite truck driver...
I noticed a couple of things while driving up from Hannibal, Missouri into Iowa last weekend. The first was that the bottom had completely fallen out of the thermometer and taken the temperature with it. Second, and there is really no polite way to describe this observation, … but when the temperature drops below 18 degrees Fahrenheit, one can actually see cow flatulence. I know it's not a savory thought. Nor is the phenomenon easy to see. In fact, its almost as elusive as a partial lunar eclipse, or the backbone of a Republican, but I saw it just the same. Which, of course, set me to thinking about what passes from Washington DC these days.And then just keeps getting better.
How can you not love a post that starts by discussing the phenomenon of visible cow farts (which I have observed myself)? Mr. Carter is hands-down my favorite truck driver...
Where Are People Moving Too?
Within the U.S. and Canada, one view of the answer is in the map at right, which shows as blue those states/provinces with more people moving to them, orange with more people moving from them, and red for states with about the same amount of people moving too or from them.
Mind you, this view is a bit biased: it measures moves by Atlas Van Lines, which means it's looking at a slice of relatively well-off movers (a great many people cannot afford to pay the likes of Atlas for their services). Another thing to watch: some of the absolute numbers are very small. For example, 3 people moved out of Newfoundland, and 9 people moved in. With a sample that small, I don't think we learned very much about Newfoundland!
But even with all the caveats, there are some surprises on here (for me, at least). Why are people leaving Wyoming? Why are people moving to Washington? Why aren't more people leaving California (like they are New York, New Jersey, Connecticut, and Illinois)?
Mind you, this view is a bit biased: it measures moves by Atlas Van Lines, which means it's looking at a slice of relatively well-off movers (a great many people cannot afford to pay the likes of Atlas for their services). Another thing to watch: some of the absolute numbers are very small. For example, 3 people moved out of Newfoundland, and 9 people moved in. With a sample that small, I don't think we learned very much about Newfoundland!
But even with all the caveats, there are some surprises on here (for me, at least). Why are people leaving Wyoming? Why are people moving to Washington? Why aren't more people leaving California (like they are New York, New Jersey, Connecticut, and Illinois)?
Labels:
Population
Employee Notice!
Via my mom:
EMPLOYEE NOTICE
**************************
Due to the current financial situation caused by the slowdown in the economy, the Government has decided to implement a scheme to put workers of 50 years of age and above on early, mandatory retirement, thus creating jobs and reducing unemployment.
This scheme will be known as RAPE (Retire Aged People Early).
Persons selected to be RAPED can apply to the Government to be considered for the SHAFT program (Special Help After Forced Termination).
Persons who have been RAPED and SHAFTED will be reviewed under the SCREW program (System Covering Retired-Early Workers).
A person may be RAPED once, SHAFTED twice and SCREWED as many times as the Government deems appropriate.
Persons who have been RAPED could get AIDS (Additional Income for Dependents & Spouse) or HERPES (Half Earnings for Retired Personnel Early Severance).
Obviously persons who have AIDS or HERPES will not be SHAFTED or SCREWED any further by the Government.
Persons who are not RAPED and are staying on will receive as much SHIT(Special High Intensity Training) as possible. The Government has always prided themselves on the amount of SHIT they give our citizens.
Should you feel that you do not receive enough SHIT, please bring this to the attention of your MP, who has been trained to give you all the SHIT you can handle.
Sincerely,
The Committee for Economic Value of Individual Lives (E.V.I.L.)
Rep. John Boehner and Sen. Mitch McConnell
PS - Due to recent budget cuts and the rising cost of electricity, gas and oil, as well as current market conditions, the Light at the End of the Tunnel has been turned off.
Subscribe to:
Posts (Atom)




