Sunday, March 22, 2015
Interesting Martian rock, up close and personal...
Interesting Martian rock, up close and personal... As imaged by MAHLI...
Saturday, March 21, 2015
Barn progress...
Barn progress... I made some headway on wiring the lights for the woodshop yesterday – power is connected, a switch is in place, seven of fifteen ceiling boxes are installed, and the first light is up and working.
On the way out, I walked by our willow tree (at right). Its leaves are now about an inch long, and the flowers look like they're just about ready to pop out. Soon we'll hear the buzz of busy bees as we walk by it!
Our neighbor is visiting with relatives in St. George, so we stopped by their house to make sure things were ok. Two of their cats came out to greet me, making it quite difficult to walk – they were taking turns twining around my feet :)
On the way out, I walked by our willow tree (at right). Its leaves are now about an inch long, and the flowers look like they're just about ready to pop out. Soon we'll hear the buzz of busy bees as we walk by it!
Our neighbor is visiting with relatives in St. George, so we stopped by their house to make sure things were ok. Two of their cats came out to greet me, making it quite difficult to walk – they were taking turns twining around my feet :)
Friday, March 20, 2015
Curiosity is looking closely at some peculiar Martian rocks...
Curiosity is looking closely at some peculiar Martian rocks... It's nice to see it back at work, after being offline for a few weeks while engineers troubleshot the intermittent short circuit that was plaguing the rover...
The hardest part of a penis transplant?
The hardest part of a penis transplant? Finding a willing donor. The donor is dead, mind you, just like with most other transplants...
Day of the Grizzly...
Day of the Grizzly... The cyclone dust collector version, that is. I received the feet, and yesterday I mounted them (the yellow disks visible on the bottom of the stand). That meant I was ready to raise the (roughly 300 pound) beast from it's previous position on its side to the upright position you see in the photo at right (click to embiggen). But how does an aging geek lift 300 pounds nine feet into the air, by himself?
With his tractor, of course :) I tied a wooden beam to the motor and impeller assembly (the green bit near the very top). I drove my tractor into the woodshop, then used the forklift on the loader to raise it up, driving forward very slowly at the same time to make the fork traverse an arc. It worked surprisingly well, and not much in the way of muscles were required.
Once I had it standing upright, I attached the final bits: the HEPA filter (the big cylinder on the right), the hoses and muffler (above the HEPA filter), and the short piece of hose attaching the chip and sawdust barrel (cylinder on wheels below the cyclone cone), and then I was done. Next step for the beast is to get power wired for it, find a way to lash it to the wall without making the entire wall vibrate, and then get the ducting up to connect it to the various machines. I've discovered that the lead time for the ducting is several weeks, so that's not going to happen instantly...
With his tractor, of course :) I tied a wooden beam to the motor and impeller assembly (the green bit near the very top). I drove my tractor into the woodshop, then used the forklift on the loader to raise it up, driving forward very slowly at the same time to make the fork traverse an arc. It worked surprisingly well, and not much in the way of muscles were required.
Once I had it standing upright, I attached the final bits: the HEPA filter (the big cylinder on the right), the hoses and muffler (above the HEPA filter), and the short piece of hose attaching the chip and sawdust barrel (cylinder on wheels below the cyclone cone), and then I was done. Next step for the beast is to get power wired for it, find a way to lash it to the wall without making the entire wall vibrate, and then get the ducting up to connect it to the various machines. I've discovered that the lead time for the ducting is several weeks, so that's not going to happen instantly...
Visualizations of pi...
Visualizations of pi... Some of these are quite beautiful; all are interesting...
Thursday, March 19, 2015
We still keep getting surprised...
We still keep getting surprised ... at how different ordinary things are up here in Utah, as compared with our decades of experience in San Diego...
Yesterday Debbie had a doctor's appointment in the morning. The doctor she was to see is a physical rehabilitation specialist at the largest local hospital; the appointment was a followup from the emergency room visit she had a couple weeks ago. All very ordinary, the kind of thing we've been through quite a few times in the past.
In those past experiences – mainly in the San Diego area – we'd get to the office 15 or 30 minutes before our appointment, do some fiendish paperwork, then wait for the doctor to actually see us. Generally that would happen quite a bit later than the actual appointment, sometimes hours later. We'd experienced this so many times that we knew to come equipped with things to read, to while away the time.
That's not what happened yesterday morning. Instead, we were handed a very small pile of paperwork, some of which was actually entertaining (we had fun with a section asking about our “social life” and how Debbie's injury affected it). We finished with that in under five minutes, sat down, and about a minute later a nurse came back to take us to the exam room. Wow! Then she figured out that Debbie needed some more X-rays, so Debbie got dressed up in one of those spiffy hospital gowns (with a bonus pair of bloomers), and hauled off for X-rays. I wanted to take photos, but Debbie threatened me with a painful death if I did. So I settled down with my Kindle, figuring (based on past experience) that I had at least 45 minutes or so to wait. Four minutes later, Debbie was back in the exam room with me, X-rays finished. A minute or so after she got dressed, the doctor came in to see her. He'd already reviewed the history and X-rays, and immediately started the exam. The exam was thorough and unhurried, with even some time for small talk – a most unstressful and even pleasant experience. In the end had an uncertain diagnosis, but thought it likely that all she needed was some physical therapy – and we were done.
We walked out of his exam room just under one hour after we walked in the door. In that time we were put into the hospital's record system for the first time, had Debbie's history taken, got X-rays, saw the doctor, and got a prescription for physical therapy, pre-cleared by our insurance company. I don't know what your medical experiences have been like, but compared with our own past experiences, that's simply remarkable.
But the surprises weren't finished. We decided to make the physical therapy appointment (with a different clinic in the same hospital) right away – Debbie was really eager to get started. It's a big hospital, with some construction going on, so we were confused about where to go. We asked at a physical rehab clinic we saw a sign for, and were told where we should go. Then the receptionist asked us if we knew how to get there – and when we said “No!”, she promptly got up and led us on a five minute walk through two floors of the hospital to get us to the right place. A few minutes later, we had her first appointment scheduled – for later that same afternoon.
So yesterday afternoon we drove back up to the hospital and checked into the physical rehab facility. Again we got there early. Again we were handed a small pile of paperwork that we quickly worked through. And again, within a few seconds of finishing the paperwork we were taken back to the exam room. This time the physical therapist did another unhurried and thorough exam, with lots of particular tests to see if he could locate the source of Debbie's knee pain. It took about an hour, but eventually he nailed it down: she has an injured (or perhaps just irritated) illiotibial band. Treatment is some simple physical therapy, and the prognosis is complete recovery within 4 to 6 weeks. We've both been through excellent physical therapy before (though Debbie more than I), but this experience still stood out for the physical therapist's competence, persistence (Debbie's injury was hard to diagnose, and both the doctor and the physical therapist thought it might be a meniscus tear initially), and easy, encouraging manner. Once he figured out what the problem was, we settled on a course of treatment, and left to get it all scheduled.
The fellow who scheduled Debbie's PT appointments was a college student, and he mentioned that he'd spent two years in Lithuania. That caught my attention immediately, as Lithuania is one of the Baltic states, quite close to Estonia, which I know very well. We ended up having a great conversation about our mutual experiences there while we got Debbie all set up for PT.
An hour and a half after we walked in the door, we were walking back out to our truck. To get there, we walked through the physician's parking lot, and something struck me: amongst the 50 or so doctors' cars, there was exactly one car that could qualify as a “luxury” car – an older Mercedes. All the rest were perfectly ordinary cars and pickup trucks – an assortment of Toyotas, Chevys, Fords, etc. There wasn't a single Porsche, BMW, or Maserati on the lot.
Presumably, after we've lived here long enough, these sorts of experiences will stop surprising us. I wonder what it would feel like to go back to California at that point? Not good, I suspect...
Yesterday Debbie had a doctor's appointment in the morning. The doctor she was to see is a physical rehabilitation specialist at the largest local hospital; the appointment was a followup from the emergency room visit she had a couple weeks ago. All very ordinary, the kind of thing we've been through quite a few times in the past.
In those past experiences – mainly in the San Diego area – we'd get to the office 15 or 30 minutes before our appointment, do some fiendish paperwork, then wait for the doctor to actually see us. Generally that would happen quite a bit later than the actual appointment, sometimes hours later. We'd experienced this so many times that we knew to come equipped with things to read, to while away the time.
That's not what happened yesterday morning. Instead, we were handed a very small pile of paperwork, some of which was actually entertaining (we had fun with a section asking about our “social life” and how Debbie's injury affected it). We finished with that in under five minutes, sat down, and about a minute later a nurse came back to take us to the exam room. Wow! Then she figured out that Debbie needed some more X-rays, so Debbie got dressed up in one of those spiffy hospital gowns (with a bonus pair of bloomers), and hauled off for X-rays. I wanted to take photos, but Debbie threatened me with a painful death if I did. So I settled down with my Kindle, figuring (based on past experience) that I had at least 45 minutes or so to wait. Four minutes later, Debbie was back in the exam room with me, X-rays finished. A minute or so after she got dressed, the doctor came in to see her. He'd already reviewed the history and X-rays, and immediately started the exam. The exam was thorough and unhurried, with even some time for small talk – a most unstressful and even pleasant experience. In the end had an uncertain diagnosis, but thought it likely that all she needed was some physical therapy – and we were done.
We walked out of his exam room just under one hour after we walked in the door. In that time we were put into the hospital's record system for the first time, had Debbie's history taken, got X-rays, saw the doctor, and got a prescription for physical therapy, pre-cleared by our insurance company. I don't know what your medical experiences have been like, but compared with our own past experiences, that's simply remarkable.
But the surprises weren't finished. We decided to make the physical therapy appointment (with a different clinic in the same hospital) right away – Debbie was really eager to get started. It's a big hospital, with some construction going on, so we were confused about where to go. We asked at a physical rehab clinic we saw a sign for, and were told where we should go. Then the receptionist asked us if we knew how to get there – and when we said “No!”, she promptly got up and led us on a five minute walk through two floors of the hospital to get us to the right place. A few minutes later, we had her first appointment scheduled – for later that same afternoon.
So yesterday afternoon we drove back up to the hospital and checked into the physical rehab facility. Again we got there early. Again we were handed a small pile of paperwork that we quickly worked through. And again, within a few seconds of finishing the paperwork we were taken back to the exam room. This time the physical therapist did another unhurried and thorough exam, with lots of particular tests to see if he could locate the source of Debbie's knee pain. It took about an hour, but eventually he nailed it down: she has an injured (or perhaps just irritated) illiotibial band. Treatment is some simple physical therapy, and the prognosis is complete recovery within 4 to 6 weeks. We've both been through excellent physical therapy before (though Debbie more than I), but this experience still stood out for the physical therapist's competence, persistence (Debbie's injury was hard to diagnose, and both the doctor and the physical therapist thought it might be a meniscus tear initially), and easy, encouraging manner. Once he figured out what the problem was, we settled on a course of treatment, and left to get it all scheduled.
The fellow who scheduled Debbie's PT appointments was a college student, and he mentioned that he'd spent two years in Lithuania. That caught my attention immediately, as Lithuania is one of the Baltic states, quite close to Estonia, which I know very well. We ended up having a great conversation about our mutual experiences there while we got Debbie all set up for PT.
An hour and a half after we walked in the door, we were walking back out to our truck. To get there, we walked through the physician's parking lot, and something struck me: amongst the 50 or so doctors' cars, there was exactly one car that could qualify as a “luxury” car – an older Mercedes. All the rest were perfectly ordinary cars and pickup trucks – an assortment of Toyotas, Chevys, Fords, etc. There wasn't a single Porsche, BMW, or Maserati on the lot.
Presumably, after we've lived here long enough, these sorts of experiences will stop surprising us. I wonder what it would feel like to go back to California at that point? Not good, I suspect...
Wednesday, March 18, 2015
Morning ponder...
Morning ponder... Why do Israeli Jews vote overwhelmingly for the conservative candidate (Netanyahu), while U.S. Jews vote overwhelmingly for the Progressive candidates (Clinton, Gore, Kerry, Obama...)? Are conservative Jews more likely to emigrate to Israel? Is it the proximity and obviousness of the existential threat that radical Islam poses to Israel? Is it something in the U.S. water supply?
Tuesday, March 17, 2015
It's undeniably spring in Paradise..
It's undeniably spring in Paradise ... and a much earlier spring than even last year. As I write this, our willow's leaves are out, about 3/4" long. The roses along the canal just started popping leaves from their buds today. Several other trees in our yard look like they're ready to pop into leaf as well. Looking back on my blog posts from last year, that's just about the same state we were in on April 12. That means we're almost a month earlier this year, which validates all the locals' astonishment at our mild winter and early spring. Temperatures today were in the high 60s; it was just lovely outside.
I took possession of this house last April 3rd, just under a year ago. Though sometimes it seems like we're making slow progress, when I think back to what this house was like when I moved in and started “camping”, it's obvious we've actually accomplished quite a bit this past year...
I took possession of this house last April 3rd, just under a year ago. Though sometimes it seems like we're making slow progress, when I think back to what this house was like when I moved in and started “camping”, it's obvious we've actually accomplished quite a bit this past year...
By popular demand...
By popular demand... Well, ok, one reader asked – but that's a significant percentage of my readers! Here's a photo of the hardware card I wrote about yesterday, and also a photo of the table saw in its partly-assembled current state...
Monday, March 16, 2015
“Almost immediately, it became clear that we were all going to hate each other.”
“Almost immediately, it became clear that we were all going to hate each other.” The subject is “mom dates”.
Geek: unexpectedly difficult...
Geek: unexpectedly difficult... Every once in a while I've come across a problem that turns out to be far more difficult than it first appears. Most recently this happened to me with the need to produce GUIDs. I accidentally observed a GUID collision (that is, identical GUIDs being generated multiple times) in the system I was working on (which shall remain unnamed). That's the sort of thing that just isn't supposed to happen, so it got my attention. I tracked down the source of the collision by examining the algorithm used. It turns out that collisions were happening when multiple processes with identical GUID generators were being run on the same server – as we were doing in our datacenter, with some servers having over a hundred such processes. Under those conditions, collisions were likely to happen several times a day – very bad indeed. Fixing that was challenging, especially fixing it in a performant way.
This morning I stumbled across a discussion about another such problem: uniformly distributing random floats in [0,1] given a source of random bits. I knew, vaguely, that it wasn't exactly trivial – but it's definitely more challenging than I'd have guessed!
This morning I stumbled across a discussion about another such problem: uniformly distributing random floats in [0,1] given a source of random bits. I knew, vaguely, that it wasn't exactly trivial – but it's definitely more challenging than I'd have guessed!
Geek: fast, easy jump consistent hash...
Geek: fast, easy jump consistent hash... Next time I have a sharding problem, I'd like to try this. But now that I've retired, why on earth would sharding ever raise its head again?
Memory lane, geek edition...
Memory lane, geek edition... I stumbled across this 1999 paper on data structures for representing text sequences in editors. I love the idea of using a simulator to rank the data structure approaches!
All of the data structures it discusses are far older than that paper, and I've implemented many of them. In the late '70s I wrote a Basic interpreter that used a buffer for each line of the program. In the early '80s I wrote a text editor (in Pascal!) that used what the paper's author calls a “piece table” data structure that included a snapshot feature (not discussed in the paper, but an obvious enhancement).
I got the idea for that last by reverse-engineering a '70s program by MicroPro called WordMaster (manual) – a general purpose WYSIWYG text editor I used for programming. I was amazed by its ability to handle large text files, and I wanted to know how it worked. I reverse engineered enough of it to understand that it kept something like a piece table data structure, and that gave me the ideas I needed to write my own with the snapshot capability. The “gap” approach discussed in the paper is new to me, and I'm surprised its performance was as good as it was...
All of the data structures it discusses are far older than that paper, and I've implemented many of them. In the late '70s I wrote a Basic interpreter that used a buffer for each line of the program. In the early '80s I wrote a text editor (in Pascal!) that used what the paper's author calls a “piece table” data structure that included a snapshot feature (not discussed in the paper, but an obvious enhancement).
I got the idea for that last by reverse-engineering a '70s program by MicroPro called WordMaster (manual) – a general purpose WYSIWYG text editor I used for programming. I was amazed by its ability to handle large text files, and I wanted to know how it worked. I reverse engineered enough of it to understand that it kept something like a piece table data structure, and that gave me the ideas I needed to write my own with the snapshot capability. The “gap” approach discussed in the paper is new to me, and I'm surprised its performance was as good as it was...
Quote of the day...
Quote of the day... An employee of WBTV (Charlotte, North Carolina) said:
I feel the doom crushing down on my shoulders...
Read more here: http://www.charlotteobserver.com/entertainment/tv/media-scene-blog/article14423408.html#storylink=cpy
“This is a learning lesson for all and we hope this will never occur again.”She's talking about another employee who was caught whistling Dixie. Literally.
I feel the doom crushing down on my shoulders...
Read more here: http://www.charlotteobserver.com/entertainment/tv/media-scene-blog/article14423408.html#storylink=cpy
Sh
The table saw is out of the box...
The table saw is out of the box ... but its assembly is far from finished. The main box weighed about 250 pounds, a bit more than I could muscle around by myself. The box was on a pallet, and I'd plopped it down in the garage section of the barn after unloading it from the delivery truck. However, we conveniently built the door from the garage section to the woodshop section just barely large enough to drive my tractor into the woodshop. So I loaded the box back onto the tractor's fork lift yesterday, and carefully drove it right to it's designated location in the woodshop. It took about 50 “K” turns to get it in the right place, and about 50 more to get the tractor back out of the woodshop – but I did it, and without bashing down any walls or posts in the process :)
Unboxing the table saw was a much more interesting process than I expected. The overall experience reminded me a bit of unboxing an Apple product – one pleasant surprise after another. First I cut the straps and pulled off the lid, revealing a piece of molded foam about 30" x 50" in size. I pulled off the foam, and discovered its bottom side was elaborately molded with bosses (for strength) and cavities to fit various things packed underneath it. The main part of the saw was packed on its side, with its cast iron top swaddled in heavy wax paper to cover the protective grease underneath it, and the entire saw covered in shrink wrap. Other components were boxed or wrapped in bubble wrap, with everything very carefully separated by some kind of shock absorbing material (several kinds were employed).
On the very top, prominently showing, was a single sheet of paper with detailed diagrams and explanation showing exactly how to remove the saw without damaging it. This was particularly nicely done. The first step was to remove the remaining box and other components. One of the things I pulled out was a large, colorfully printed piece of stiff cardboard, covered with plastic that had bubbles in it to hold various bits of hardware needed to put the saw together, along with some special tools (like metric Allen keys). This piece of cardboard was a delight to examine – someone went to a great deal of trouble to make my life easier! The colors are a form of coding to help identify each piece of hardware. Text in each colored section explained what the hardware was. Behind each bubble the cardboard was scored to make it easy to remove the hardware. I've assembled lots of kits like this one, but never one in which the hardware was so easy to locate and identify. Very nice job, SawStop. Very nice indeed.
After I removed everything except the base saw, I had about 150 pounds to muscle around – not so bad, especially since all I had to do was roll it and tilt it up. I followed the (excellent) directions, and in very short order I had stood up the table saw in its new home. It was getting toward the end of my day, so I didn't do much more work on it – just cleaned the grease off the cast iron tabletop, installed the two hand wheels (also cast iron, and beautifully made) and the motor cover. Today I'll tackle the rest of it...
Unboxing the table saw was a much more interesting process than I expected. The overall experience reminded me a bit of unboxing an Apple product – one pleasant surprise after another. First I cut the straps and pulled off the lid, revealing a piece of molded foam about 30" x 50" in size. I pulled off the foam, and discovered its bottom side was elaborately molded with bosses (for strength) and cavities to fit various things packed underneath it. The main part of the saw was packed on its side, with its cast iron top swaddled in heavy wax paper to cover the protective grease underneath it, and the entire saw covered in shrink wrap. Other components were boxed or wrapped in bubble wrap, with everything very carefully separated by some kind of shock absorbing material (several kinds were employed).
On the very top, prominently showing, was a single sheet of paper with detailed diagrams and explanation showing exactly how to remove the saw without damaging it. This was particularly nicely done. The first step was to remove the remaining box and other components. One of the things I pulled out was a large, colorfully printed piece of stiff cardboard, covered with plastic that had bubbles in it to hold various bits of hardware needed to put the saw together, along with some special tools (like metric Allen keys). This piece of cardboard was a delight to examine – someone went to a great deal of trouble to make my life easier! The colors are a form of coding to help identify each piece of hardware. Text in each colored section explained what the hardware was. Behind each bubble the cardboard was scored to make it easy to remove the hardware. I've assembled lots of kits like this one, but never one in which the hardware was so easy to locate and identify. Very nice job, SawStop. Very nice indeed.
After I removed everything except the base saw, I had about 150 pounds to muscle around – not so bad, especially since all I had to do was roll it and tilt it up. I followed the (excellent) directions, and in very short order I had stood up the table saw in its new home. It was getting toward the end of my day, so I didn't do much more work on it – just cleaned the grease off the cast iron tabletop, installed the two hand wheels (also cast iron, and beautifully made) and the motor cover. Today I'll tackle the rest of it...
Subscribe to:
Posts (Atom)




