Saturday, October 25, 2014

Nano-pad...

Nano-pad...  I ordered one of these some time ago, curious to see how well it would work.  Answer: it works very well indeed!  The claim is that it works via “gecko-like nano-suction”, allowing one to stick things together that wouldn't ordinarily do so – and then to be able to pull them apart again.  What the photo shows is entirely realistic – despite finished wood not being a perfectly smooth surface, the nano-pad sticks to it quite nicely.

So that got me curious, of course.  Just what is this “gecko-like nano-suction”, anyway?  I envisioned a perfect array of thousands upon thousands of little tiny suction cups, but that's not how it works at all.  Instead, the surface is pocked by thousands of randomly shaped and placed little microscopic pockets, as you can see below.  The silver arc is the edge of a dime, to give you some scale.  The photo is at 60x magnification.  You can see dozens of oddly shaped little squiggles here; those are the little pockets that act like suction cups.  Some of them, if you look closely, are filled with dirt – which will wash right out, making it good as new. 

I had a heck of a time getting that dime off there when I finished taking this photo :)


Castro helped us get the Hubble Space Telescope...

Castro helped us get the Hubble Space Telescope...  I knew this general story, but this article has lots of details new to me...

It never ceases to amaze me...

It never ceases to amaze me ... how many things that feel intrinsic are actually cultural.  I've traveled quite a bit around the world, and have encountered numerous examples before – but they're still hard to absorb.  Sex (long necks, anyone?) and food (locust stew - yum!) are the two most common sources for these, followed closely by aesthetics (check out that purple and green house!).  It's one of the big challenges for me in understanding other cultures – those things that make my head explode...

The more we learn about genetics...

The more we learn about genetics ... the closer we'll get to something akin to eugenics.  Lots of interesting ponders on this subject!

If we lived for 1,000 years...

If we lived for 1,000 years ... our notions of economics would be upended.  A political science student takes a whack at the implications.  Science fiction authors have been thinking about this for decades, and have come up with many, many more possibilities.  The compound interest scenario is a favorite of stories about both long lifespans and time travel...

I share her pain...

I share her pain ... but I would have cried even harder when offered a consolation meeting with Obama :)  Via Idaho mogul-of-everything, friend, reader, and former colleague Doug S., who says “We all have those tears :)” ..

World's most beautiful cemeteries...

World's most beautiful cemeteries...  A collection from Smithsonian.  I've visited several of these, and they are all beautiful places.  But there's one I've visited that I thought was more beautiful than any in this collection: a tiny cemetery near the little town of Kasti, on the island of Saaremaa, in Estonia.

I don't have any photos of it, unfortunately.  What made it so beautiful to me was the way that the locals had so carefully maintained this cemetery over several hundred years.  The oldest gravestones I found dated to the 1600s; the newest ones were very recent.  All were simple and plain – and all, even the oldest, had fresh flowers on them.  The lawn and plants were immaculately maintained, and the surrounding and overhanging forest had irrigation ditches to keep the trees watered and healthy.  The atmosphere was somber, dignified, and peaceful.

I have fond memories of something that happened there, as well.  As I was walking around, a local family – husband, wife, two young kids – came in bearing flowers.  The kids were happy and full of energy; they immediately went bounding off to play amongst the tombstones.  The couple went over to a grave near one corner, cleared the older flowers away and set a new bouquet down.  The husband took out some hand shears and started clipping the grass around the grave, and pulling a few weeds.  The wife stood silently, crying a little.  I felt like an intruder on this scene, and quietly walked out.

I started to get into my rental car when I saw the husband walking toward me with a friendly expression.  He waved and greeted me, in Estonian, which I don't know a word of.  I asked if he spoke English, and he replied that he did – but just a little.  He said that he and his wife were afraid that they had intruded on my solitude, and that they didn't want me to think I had to leave because they had come in.  We laughed together when I told him that I'd had the same feeling about them.  He assumed I had a relative buried here, but I told him I was just sightseeing, and had been struck by the beauty of this little cemetery as I drove by.  He dragged me back in to meet his wife, whom he said spoke perfect English.

Well, it wasn't so perfect :)  But it was, truly, much better than his.  Both of them were very warm and friendly to this strange American tourist (this was back in 1993 or 1994, and foreign tourists were very unusual at that time).  She told me that the grave they were visiting was for her father, who had died about 15 years earlier.  What made her sad today was that he had not lived to see the end of the Soviet occupation (1991).  That would have filled him with joy, she said, and that's easy to believe.  The three of us talked for about an hour – me with lots of questions about what it was like to live on Saaremaa, them with lots of questions about America.  Like so many other Estonians back then, when they heard I lived in California, they assumed I was on a first name basis with every Hollywood star :)

Our conversation was intermittently in English, and intermittently in Estonian as the husband and wife came up with things they wanted to ask, or talked about something I'd said.  After one of these Estonian interludes, the woman asked me if I'd join them for dinner, at their home, just a couple of miles away.  I jumped on that opportunity!

The conversation continued before, during, and after the dinner.  The kids about 12 or 13 years old) joined in, too, with lots of questions of their own.  The dinner itself was simple fare: a little pea-and-carrot salad, something I'd call roast pork, with a savory sauce, and boiled potatoes with (the inevitable) dill.  There was a slightly sweet cold soup, tomato-based, again with dill.  There was beer to drink (including for the kids), a local brew.  I'm not a beer fan, and I didn't particularly like theirs, but I drank it anyway :).  It was well after dark when I finally took my leave, with lots of smiles, good cheer, and waves goodbye.  I had a standing invitation to visit the next time I came to Saaremaa.

A couple of years later, I did just that – but when I drove up to the house and knocked on the door, an unfamiliar face greeted me.  When we found someone who spoke English, I found out that the family I knew had moved away – the husband had found good work in Poland, and they all moved there.  I think of them, now and then, and hope that they're doing well.  The Smithsonian cemetery story brought them to mind once again...

Looks like old sol needs a little Clearasil...

Looks like old sol needs a little Clearasil...  Via APOD, of course...

Abe's whiskers...

Abe's whiskers...  Those are whiskers, not a beard.  I've read a lot about Abe Lincoln, but this was entirely new to me...

Where does one even start with this?

Where does one even start with this?  If you can stand it, play the clip at right.  It's a segment of a speech Hillary Clinton gave yesterday at a campaign rally for Massachusetts gubernatorial candidate Martha Coakley.

There are several things in this clip that should raise the hackles of anyone who isn't avowedly socialist.  One of them stands out.  Says Hillary:
“Don't let anybody tell you that it's corporations and businesses that create jobs.” 
That's the language of socialism, in all its many guises, pure and straightforward.  Governments create jobs, not private industry, say those true believers.  And, to my great distress, a plurality of Americans today agree with that.

This is the candidate who – according to virtually every poll – currently would beat any conceivable candidate that the Republicans could field against her, including Mitt Romney version 3.

This is your cup of morning doom.  You're welcome...

Comet farts, with dunes...

Comet farts...  Rosetta knows what comet 67P smells like, and it's not good news...

Well, that didn't take long!

Well, that didn't take long!  Alan Eustace has broken Felix Baumgartner's recent record for high-altitude skydiving.  Eustace is a Google executive, and funded his jump himself...

“...you grandiloquent twonk.”

“...you grandiloquent twonk.”  I have no idea who Katy Perry or Russell Brand is, but I gather they're some sort of celebrities.  One thing I am very clear on, though: James Delingpole really, really doesn't like Russell Brand!  The intro to the linked article:
Russell Brand - soap-dodger, lech, former husband of the infinitely more talented Katy Perry - is the most irritating person on earth. This much we knew. But I don't think any of us realised just HOW irritating till his most recent appearance on BBC Newsnight last night in which, besides revealing himself to be a 9/11 Truther, he also emerged as a preening, ignorant, manipulative bully with disturbing communist and Islamist tendencies.

Russell Brand - soap-dodger, lech, former husband of the infinitely more talented Katy Perry - is the most irritating person on earth. This much we knew. But I don't think any of us realised just HOW irritating till his most recent appearance on BBC Newsnight last night in which, besides revealing himself to be a 9/11 Truther, he also emerged as a preening, ignorant, manipulative bully with disturbing communist and Islamist tendencies.
“soap-dodger” :)  I love James Delingpole's rants...

Adventures in electricity...

Adventures in electricity...  A few months ago the painters removed all the switch and outlet covers in the house, and I took advantage of that to do some random inspection of the electrical work.  After seeing some obvious problems and some shoddy work, along with some not-so-good components, I decided to replace all the switches and outlets in the house with quality new components – and to fix all the problems I found along the way.

Yesterday I inventoried all the parts I'd need, and made an epic purchase at Lowe's.  My entire shopping cart was filled to the brim with large quantities of parts.  The checkout clerk thought I was an electrician stocking up for the month.  Just to give you a flavor: I bought 84 switches.  This sort of thing comes along with a 4,800 sq. ft. house, I suppose.  That pile of components is intimidating :)

When I got home, I broke out my tools and went to work in the living room.  My first effort was to figure out why one switch, placed as if it were a light switch, didn't work.  After some effort, I determined that it was supposed to control the top outlets on three separate dual outlets scattered around the room.  The reason it didn't work?  Somebody who didn't understand these things had replaced two of the dual outlets, and had not removed the “shorting bar” that allowed the upper and lower outlet to be controlled separately.  I fixed that.  Then I discovered one outlet with a missing ground wire – that's actually dangerous.  I fixed that.  The next outlet had the “hot” and neutral wires reversed – also potentially dangerous.  I fixed that.  I've only redone half of one room, and I've already found three errors, two of them potentially dangerous.  I'm a little surprised the former owners survived!

Watch those tires, Curiosity!

Watch those tires, Curiosity!  Rough road ahead...

Amazon vs. Hachette...

Amazon vs. Hachette...  I've commented on this briefly before.  To me, the whole kerfuffle seems grossly overblown.  Amazon's efforts are entirely consistent with the disintermediation that the web brought to many industries.  Hachette is acting like the buggy whip manufacturers when cars first came out.  Hachette will lose in the end – it's just a matter of when – and consumers and authors will win, along with Amazon.

I've felt a little lonely in this opinion.  The lamestream media absolutely delighted in the “feud”, and coverage has been overwhelmingly pro-Hachette.  Yesterday, though, I ran across a couple of articles by people who share my perspective, and have some interesting points to make: CoyoteBlog and Megan McArdle.  Reason has been taking the same position since the news broke.  You might note a pattern there: all three sources lean libertarian (Reason rather overtly so).  The dominant ideologies (progressive and conservative) tend to support Hachette's position, for different reasons, with a few exceptions on the conservative side.  There really aren't all that many issues where the libertarians stick out quite so much (drug legalization is another), so it's interesting to see that this is one.  Probably it just boils down to the libertarian notion that it's best to keep government out of things, whereas both progressives and conservatives (these days) seem to agree that BIG BAD GOVERNMENT is a good thing...

Friday, October 24, 2014

Your morning laugh...

Your morning laugh ... courtesy of my mom.  Oh, the hypocrisy of those socialists!

Chinese launch trans-lunar mission...

Chinese launch trans-lunar mission...  This is a practice mission, to test their ability to send a spacecraft to the moon and back to earth, then land.  They're planning to use a skip reentry method, a particularly sophisticated choice that requires enormous precision in navigation, and the ability to react to atmospheric variations.  The benefit is that it can use a smaller, lighter heat shield.  The U.S., back in the '60s and '70s, didn't have the ability to navigate precisely enough to do this, nor did we know enough about the upper atmosphere to be confident even if we did – so our Apollo missions needed large and very heavy ablative heat shields.  More here.

The next step for the Chinese space program is to land a robotic explorer on the moon (something they've already done once), collect some rock samples, then return to Earth.  Their space program is ambitious, and more than a little impressive...

AR2192...

AR2192...  It's a giant active region (a “sunspot”) turning toward Earth, and could hammer us with a giant CME.  Via APOD, of course...

If you're of a certain age...

If you're of a certain age ... and you were an avid follower of the U.S. space program in the '50s and '60s, then this page will send you trippin' down memory lane.  It's a collection of high quality audio recordings from NASA, covering things from Sputnik to the Space Shuttle, and more.  At right is one of my favorite examples.  I remember sitting in my uncle's basement, watching a grainy picture of Houston Mission Control on a crummy black and white TV set.  I, too, was holding my breath waiting for word of whether Armstrong and Aldrin had landed safely...

Economics over panic, act 45,992,822...

Economics over panic, act 45,992,822...  Remember the great rare earth panic, in which China had a stranglehold on the world's supplies?  Well, that raised prices – and all of a sudden, other countries discovered that they, too, had profitable reserves of rare earths – which turn out to be not so rare after all.  The same phenomenon is why the U.S. has suddenly become an oil exporter: the high price of oil makes fracking economically feasible...

“When you're using a slide rule you have to be engaged.”

“When you're using a slide rule you have to be engaged.”  That's a quote from a decent article about slide rules just published by NPR, of all folks.  The article reprises a broadcast segment of All Things Considered that's also quite good (you can listen to it from that link).  That quote is from a piece of both the article and the broadcast that talks about one of my favorite things about using a slide rule: that you have to think about the math as you're using it (as opposed to a calculator, which just hands you the answer on a silver platter).

Obama administration sinks to a new low...

Obama administration sinks to a new low...  They apparently have no sleaze or arrogance limit at all...

Thursday, October 23, 2014

Investment opportunity...

Investment opportunity...  Reader Jim M. passes along this investment opportunity for your consideration:
Thought you might want to consider getting on board early.

A German Engineer just started his own business in Afghanistan He's making land mines that look like prayer mats.  It's doing well.  He says prophets are going through the roof.

Old Glory flying over the homestead...

Old Glory flying over the homestead...  Naturally, the day I first get to have it flying there isn't even the whisper of a breeze :)

Canada honors its hero from yesterday's terrorist attack...

Canada honors its hero from yesterday's terrorist attack...  The Parliament's Sergeant-at-Arms, Kevin Vickers.  Via my mom...

Barn: insulated!

Barn: insulated!  The insulation crew finished the entire job yesterday, and the results are pretty impressive.  The blown-in fiberglass fills every last nook and cranny in the walls, which is how they manage to get such high R-factors.  It was fun to watch them work; the modern materials and machines really made the job go fast.

For example, the netting was stapled up with hundreds upon hundreds of staples, at an average interval of about 2 inches.  They did this with a staple gun that works like a machine gun – they just run it down a stud or rafter, and the staple gun spits out staples at a rate of 8 to 10 per second.  When you see how many staples they put in, you'd think they spent days doing it – but it actually went very quickly.

Blowing the insulation in was also a fast job.  A huge machine inside their truck has a hopper full of the raw fiberglass, and a large blower.  When the installer presses a trigger on his “insulation gun”, this machine starts chopping and fluffing the fiberglass, then blowing it at high speed down a long flexible hose to his gun, where it fills whatever cavity he's working at that moment  (see the last two photos below).

The bottom line: a three man crew installed top quality insulation in the walls and ceiling of a 4,000 sq. ft. barn in about 9 hours.  That's darn fast!


Roof: the destruction continues...

Roof: the destruction continues...  Most of our house's roof is so steep that the roofers cannot use their powered shingle-removal machine.  They're reduced to hand tools that are about the same as they were 100 years ago – and a lot of muscle power.  It's going to take them more than a week to strip all the old shingles off...


Rosetta's latest imagery...

Rosetta's latest imagery...  I can still scarcely believe that we can actually see what a comet looks like close up.  Click to embiggen, as usual. 

In just a few weeks, Rosetta's little lander (Philae) will attempt to land on comet 67P.  Awesome!

Environmentalists beaten about the head and shoulders with science...

Environmentalists beaten about the head and shoulders with science...  Fracking doesn't cause water pollution...

The end of the vacuum tube era...

The end of the vacuum tube era...  If you're not an electronics geek, you can be forgiven for believing vacuum tubes disappeared quite a few years ago, with the advent of flat screen TVs.  In fact, millions of vacuum tubes are still being manufactured every year, and bought by consumers worldwide – including, quite likely, you.  Every microwave oven manufactured since the 1940s contains a vacuum tube called a cavity magnetron – the gadget that produces hundreds of watts of microwave radiation to heat your food.

I've long been fascinated by cavity magnetrons, less for their technical attributes than for their contribution to the Allies victory in WWII.   Their invention by British scientists, and mass production by American industry, led directly to small, lightweight, high resolution airborne radars – and gave the Allied air forces a huge advantage over those of the Axis.  That same device is what cooks your food in today's microwave ovens.

But this is about to change.  As this article describes, recently introduced high frequency, high power transistors are about to revolutionize the world of the microwave oven.  The transistors are better in many ways, but what the consumer will notice is infinitely variable power, and no loud noise.

My electronic career got started with devices that used vacuum tubes as their active components.  It's been many years since I last designed something using a vacuum tube, but I've still got a fond place in my engineer's brain for them.  Once the microwave industry has converted (which I expect will happen extremely quickly), there will be no more high volume vacuum tube production – just low volume boutique production for the crazy people (some of my friends amongst them :) who think vacuum tube audio amplifiers sound better than solid state ones... 

Minimum wage laws kill jobs, part 30,289...

Minimum wage laws kill jobs, part 30,289...  This was totally predictable, and in fact many did (including yours truly).  The reaction of businesses to high minimum wages is to automate every low-skill job in sight.  The latest to announce a move in this direction: the classic low-wage entry-level employer: McDonald's.  Yep, that's right: get ready for burgers flipped, built, and served by robots.  As the McDonald's executives make abundantly clear, this is only happening because high minimum wages tipped the economic scales: investing in robotics is now cheaper than hiring high school kids.

Of course, with the tumbling cost of robotics and the rising cost of labor, this was inevitable at some point anyway.  But high minimum wages are hustling that day forward, and long before society has adjusted to that reality.  Once the robots are widely deployed at fast food joints, hundreds of thousands of jobs will be lost.  Perhaps worse, one of the largest employers of young people with zero job experience will stop providing that valuable introduction to the world of gainful employment.  As a society we don't have good alternatives yet...

Here we go again...

Here we go again...  Fannie and Freddie are going to start providing loans at 97% loan-to-value to high risk borrowers.  This is exactly what led to the popping of the last housing bubble, just a few years ago.  This is unbelievably irresponsible and stupid from every perspective except one: political.  CoyoteBlog has an excellent piece on this insanity, and Reason is on the case too.  Unfortunately, the politicians we've elected know that good news today is worth a lot more, politically, than bad news down the road...

Amazing photos...

Amazing photos...  I ran across this Flickr page for a photographer named “Max R.” who has an absolutely stunning collection.  I could spend hours here...

Early morning Beatles...

Early morning Beatles...  Since about 3:30 am this morning, I've been kicked back in my little temporary “office” listening to the Beatles while I do some bookkeeping, answer some email, order some needed supplies, read the news, and update my blog.  Listening to this music takes me right back to the '60s and early '70s, when I listened to the Beatles (and lots of other contemporaneous music) as I went about my (mostly awful) jobs.  The music was great, though, and it still evokes the same happy enjoyment that it did when I first heard it.

It's wonderful that I can listen to it still, almost 50 years later, on incredibly high quality equipment that's tied to my computer.

It's been a hard day's night, say the Beatles...

Ballot fraud...

Ballot fraud...  James O'Keefe puts the lie to the claims that there is no significant election fraud, so loudly made by (primarily Democratic) opponents of voter ID laws...

Rh null...

Rh null...  What it's like to be someone with an extremely rare blood type – in this case, one shared by just 40 people on the planet...

Wednesday, October 22, 2014

Flagpole: up!

Flagpole: up!  Hooray!!!  Randy B. and his sidekick Jeff drove his 24,000 lb. loader over, and in amazingly short order we had the flagpole up and perfectly vertical.  We spent a lot more time worrying about how to raise it without dinging the aluminum than we did doing the actual raising :). 

Once we had it up, just sitting in the sleeve, it was time to make it perfectly vertical.  The sleeve is about two inches larger in diameter than the flagpole's bottom is, so there is some “wiggle room” there. The way you secure the flagpole in the perfect position is interesting: nothing but sand holds it in place.  First we poured the sleeve about 1/3 full of sand, then we maneuvered the flagpole into a perfectly vertical position (using a level).  After that, we gently banged the side of the pole to vibrate and settle that first bunch of sand.  We re-checked the vertical, tweaked it for a final time, then filled the whole sleeve with sand and vibrated it.

There was one more step after that: covering the sand with a sealing layer of silicone caulk (so the sand won't get wet), and then installing the decorative aluminum flashing on the bottom.  I took the photo above before I'd finished those steps, as the light was failing.  But it's all done now, and ready to attach a flag to.  As soon as it warms up just a tad in the morning, Old Glory will be flying over our heads...

Barn: it's insulation time...

Barn: it's insulation time...  Yesterday afternoon I met with a garage door contractor, and I picked out a door.  I chose the model with the best insulation I could get in a 2" thick door, which turns out to be R19.5.  Naturally, that particular model has the longest lead time :)

This morning the insulation crew arrived, and as I write they are installing the netting (see photos below) that will contained the blown-in fiberglass they'll be installing later today.  They call this stuff “netting”, but it reminds me of the stuff they put on the bottom of box springs these days, except this stuff is much heavier...


Roof: let the demolition begin!

Roof: let the demolition begin!  The roofing crew arrived early this morning to start demolishing the existing shingle roof on our house.  The roof was covered with a thick layer of frost when they got here, but that quickly vanished once the sun got above the trees.  After that (hopefully soon after that!) they will start installing a new standing-seam steel roof...

Fireplace: acid-washed...

Fireplace: acid-washed...  The masons were here on Monday evening to wash all the rock down with dilute muriatic (sulfuric) acid.  They scrubbed each rock off with a stiff brush and a rough rag, after draping the mantle to keep the acid from it.  After that, they rinsed everything off.  The main reason for the acid wash was to remove the thin scum of Portland cement (from the mortar) that ringed most of the rocks.  It's all gone now.  The hearthstones had never been cleaned, so this wash really made them look good.

After this we all went outside with a few of the leftover pieces of stone.  We painted each one with two different sealers (half and half).  Tonight we will choose a sealer and paint the actual fireplace with it...


Flagpole: arrived!

Flagpole: arrived!  UPS Freight delivered my flagpole on Monday morning, and I've been busy putting it together (it's a kit, of course) and getting it ready to be erected.  This afternoon Randy B. (who lives just north of me) will drive his loader down here.  It can raise 30' high, so it should make short work of getting the flagpole up.  After that, all we have to do is pour some sand around it (while making sure it's standing straight up!), do a little sealing with silicone caulking, and then it's ready to go.  The crummy photo at right shows the bottom section of the pole with one end near the concrete foundation, and the other section still in its tube on the left.  The logs on the lawn are holding the pole up off the grass, which apparently can permanently stain the aluminum of the flagpole...

Holy cracklin' sunspots!

Holy cracklin' sunspots!  Via APOD, of course...

Yet another...

Yet another ... list of “must read” science fiction.  I confess to be one of those who started, but didn't finish, Gravity's Rainbow.  I have read seven of the ten listed, and they'd be on my top 25 list for sure – so I might just have to read the other three (and finish Gravity's Rainbow)...

The many deaths of Ambrose Bierce...

The many deaths of Ambrose Bierce...  I know Ambrose Bierce only by one of his writings: The Devil's Dictionary, which is one of my favorite works to read when I need cheering up.  I had no idea about the rest of his story...

The most trusted news source...

The most trusted news source...  The only major news source that is more trusted than distrusted across the ideological spectrum is ... The Wall Street Journal.

These are U.S. news sources and U.S. citizens only.  I note they leave libertarians out of the ideological mix (their numbers are small), but I'd expect the results to be the same.

It's interesting to ponder both the depth and the consistency of the inferred ideological bias across these news sources.  Only The Economist, the BBC, and a highly filtered aggregator (Google News) are perceived as being relatively biased.  The rest are perceived as sharply biased, with the majority being perceived as biased toward liberals.

I'd love to see something like this for the British press.  Their unabashed biases are, to me at least, refreshing and interesting.  Nobody their pretends to be biased, but behaves otherwise – their media are firmly for one side or the other (and there's a good mix) and they make no bones about it...

Dancing traffic light...

Dancing traffic light...  Via my lovely bride.  Cute...

Get the government out of the way...

Get the government out of the way...  Reader, friend, and former colleague Doug S. passes along this story about how the Nez Perce Indian tribe restored Coho salmon on the Clearwater River, taking them from extinction to fishable abundance in just a few years.  They were able to do this mainly because being a tribe exempted them from state and national government interference.

The success story is heartwarming and satisfying.  The reasons for their success make me want to tar and feather every Progressive son of a bitch in sight...

What the world eats...

What the world eats...  Reader, friend, and former colleague Simon M. passes along this interactive graphic.  It breaks down the kinds of food people of various countries eat, year-by-year, by calories or weight.  There were some surprises in here for me – such as Hong Kong folks being by far the largest meat eaters – but only in recent years.  I'd love to know the whys behind some of these data... 

Really?

Really?  According to this study, you can identify introverts by their facial expression.  Furthermore, the extroverted expression (at least) can be faked.

WWII Japanese “balloon bomb” found in Canada...

WWII Japanese “balloon bomb” found in Canada...  It's common for old ordinance to be found many places – but not in Western Canada, and not with such an interesting story attached.  See here and here for more details...

What does your instinct tell you?

What does your instinct tell you?  Consider these facts:
  • A Republican candidate notices that when he votes for Republican candidates, the votes are registered for Democratic candidates.
  • He's voting on a touch-screen voting machine.
  • He's voting in Illinois.
Election officials said that the machine's touch screen had a “calibration error”.

I wonder if there's some vote-fixing going on.  Because nothing says “shenanigans” like Democrats in Illinois...

California leads the way...

California leads the way ... in state-mandated elective abortion coverage – even for churches with religious objections to killing babies.

I'm pretty confident that this would not happen in Utah.

I'm sure the California law will be challenged on Constitutional grounds.  There's no telling how the Ninth Circuit (which includes California) would rule on it, but if they ruled to uphold the mandate, I'm sure it will be further appealed to the U.S. Supreme Court – where, at least with the current roster of Justices, it will be overturned...

Tuesday, October 21, 2014

First steps...

First steps...

I know it's juvenile...

I know it's juvenile ... but I enjoyed the hell out of this:


“My dad’s in there!”

“My dad’s in there!”  A quiet hero – saves a guy from a raging fire, and then just disappears...

Loansharknado...

Loansharknado...  Anyone who's been observing American politics for as long as I have is going to be hard to surprise when it comes to campaign ads.  After all these years, I've come to the point where I assume I've seen it all.

I was wrong.

I've never seen anything quite like loansharknado before.  I can't decide whether the candidate deserves an award, or should be tarred, feathered, and run out of town...

Almond...

Almond...  At 60x.  It isn't often that my microscopy target is also a tasty treat!


Challenging problem?

Challenging problem?  I ran across this post by Terence Tao, a math professor at UCLA, that poses a puzzle.  It sounds very difficult (or even impossible), but it turns out to have an easy answer:
Three farmers were selling chickens at the local market.  One farmer had 10 chickens to sell, another had 16 chickens to sell, and the last had 26 chickens to sell.  In order not to compete with each other, they agreed to all sell their chickens at the same price.  But by lunchtime, they decided that sales were not going so well, and they all decided to lower their prices to the same lower price point.  By the end of the day, they had sold all their chickens.  It turned out that they all collected the same amount of money, $35, from the day's chicken sales.  What was the price of the chickens before lunchtime and after lunchtime?
As is often the case with such problems, the description (probably deliberately) makes the problem sound a bit more complex than it actually is.  You can simplify all that verbiage down to this equation:
a(52-x) + bx - 105 = 0
The problem is to find a and b.  Though the problem didn't actually say this, it turns out the answers are non-zero integers, which I just assumed was the case (for puzzles, this is the sort of answer one would expect).  Once I had this equation, I reasoned that the average price per chicken was 105/52, or slightly over $2.  So I tried 3 and 2 for a and b, and I had the answer (plug them into that equation, and you'll get x = 51).  Total time: under 5 minutes.

Now check out the comments on that post.  Many of the people tackling this problem made it far more complicated than it actually is.  You can almost see their knowledge of mathematical techniques getting in the way of their reasoning about the problem.  You've heard the old expression “If you have a hammer, then everything looks like a nail.”  I think there's a lot of that going on here :)

Martin Gardner's puzzles...

Martin Gardner's puzzles...  Eight of his very best.  Back when Scientific American was a real science magazine, Gardner's column was something I greatly looked forward to in each issue...

Where do ideas come from?

Where do ideas come from?  Isaac Asimov on creativity, from 1959.  Several things from the essay resonate with me, but most especially the notion that solitude is a requirement.  The innovations that I have come up with have always occurred to me while working alone.  The most recent example I can think of is the approach I came up with for making Java's numeric formatting and parsing run more efficiently: it came to me after thoroughly understanding what Java does now, what other approaches people have made, and thinking hard about the problem while alone in my office over the course of several days.  That pattern seems entirely typical.  Asimov's references to the need for an informal, intimate atmosphere amongst a team also resonates.

It's interesting to note that the guy who wrote this essay is best known for his science fiction works, then for his non-fiction books about science, and then for his remarkable productivity (he still holds the record for the number of published books written by a single author)...

Remy, again...

Remy, again...  As always, I don't know whether to laugh or cry...

Bureaucracy kills...

Bureaucracy kills...  In both Afghanistan and Iraq, hundreds of local citizens risked their lives – and those of their families – to help their country and the American forces by providing translation services to front-line troops.  There are many, many stories of bravery and heroism amongst this group; all you have to do is google and you'll find them.

Especially in Afghanistan, but also in Iraq, Islamist forces have targeted the translators for retribution.  If they can't get to the translator directly, they'll go after the translator's family.  Dozens have been killed, many more kidnapped, injured, or maimed.

The translators often formed very close relationships with the troops they served, and those troops, once back in the U.S., have gone to great lengths to try to get their translator friends to safety in the U.S.  You'd think this would be easy, as under pressure from these troops Congress passed years ago (and the President signed) several pieces of legislation designed to do exactly that – but thousands of these authorized visas go unused, while thousands of translators yearning to be in the U.S. remain in Iraq and Afghanistan, afraid for themselves and their families every day.

Why?

There is no good reason for it.  Nothing other than U.S. State Department red tape is standing in the way.  This has been true for six years now.  Piles of forms, process that takes months, and other bureaucratic “features” are the only barriers.  It's disgusting, infuriating, and shameful.  These translators have already proven their friendship with Americans in the most meaningful way imaginable – by putting their lives on the line for their American friends.

In the YouTube clip I've posted here, John Oliver does a remarkably good job highlighting this problem.  He conveys the issue in detail, so far as I can confirm, in a completely even-handed and accurate way.  He's also funny in the process, a fact that I found challenging to deal with: humor while being angered is not something I experience every day.  Bottom line, he's very effective at communicating this issue – far more effective than any news organization or politician I've ever seen.  There are some lessons here that politicians could profit from...

Monday, October 20, 2014

Laugh or cry?

Laugh or cry?  Crowd walks out on the light-bringer.

For six years now, Obama's administration has hopped from one disastrous piece of policy and execution to another.  I could fill an entire post with just a list of them.  The public's opinion has been slowly swinging against him for a while now, but suddenly it's swinging fast – and all, apparently, because of the latest screw-up with the Ebola response.  I'd have to count that amongst the least frightening or worrisome of his screw-ups, so I'm really surprised at the general public reaction.   The actual (as opposed to the hyped or theoretical) threat from Ebola to the U.S. is effectively zero when compared with, say, the certain consequences of ObamaCare.  Or, for that matter, the likely consequences of the administrations serial mishandling of events in the Middle East.  In other words, the general public seems to have a strange choice of what to get all twitterpated about...

Sunday, October 19, 2014

Torn piece of paper...

Torn piece of paper...  At 45x...


Box Elder Bug...

Box Elder Bug...  At 60x...


The last bathroom fixture!

The last bathroom fixture!  One of our shower's grab bars arrived after everything else did, and I didn't have a chance to install it until today.  This is the very last bathroom fixture to go in, which you'd think would mean it's the last hole I have to drill in our nearly diamond-hard bathroom tile.  Unfortunately (for me) there's still one more set, to install our bathroom window's window shade.  It should arrive next week, and then I really am done with these *#&**%^$%&* holes!

Speaking of which, the photos below give you a flavor for what it's like to drill these holes.  The first photo shows what it looks like just after you've successfully started a hole.  Starting on slippery porcelain is a bit of an art combined with a healthy dose of brute force.  The trick is to hold the drill at 45° to the surface, then cut a little crescent-moon shaped depression while holding the drill firmly in one place (not easy, that bit!).  Once you've got your crescent, you push in firmly while rotating the drill slowly to the normal perpendicular orientation, over about 10 seconds.  The result is what you see in that first photo, if you did it correctly.  Once you've got that “island” in the center, you're golden: it holds the drill bit in the right spot.  The second photo shows some drilling in progress.  Note the liquid around the tip – that's water, which I squirt at the bit continuously to lubricate and cool it.  This is vital to the longevity of the bit.  Let it get hot, and you're going to plunk down $20 or more for another bit!  The last photo shows three holes that are (thankfully) finished.  To get from what you see in the second photo to a finished hole takes 10 to 15 minutes of constant drilling while pushing against the wall hard.  If your drill bit is dull, it can take twice that long...

Sign of the end times' approach?

Sign of the end times' approach?  APOD is down :(

Update: APOD is back up!  I was afraid it was the victim of Obama budget raids, but thankfully my fear was unfounded...

Little flower...

Little flower...  This tiny flower is in bloom behind our house right now.  Each blossom is about the size of a peppercorn – you can barely see that it's a flower.  At 40x, it actually looks like a flower :)

Arsenic eaters...

Arsenic eaters...  Your morning dose of the bizarre...

Saturday, October 18, 2014

It's a beautiful evening in Paradise, part 167...

It's a beautiful evening in Paradise, part 167...

Screw...

Screw...  This is a high quality wood screw, nickel-plated high tensile strength steel, at about 20x.  These are what Nest supplies with its “Protect” fire/smoke/carbon monoxide alarms.  Note the asymmetrical raised threads: one of them is higher and sharper than the other.   Those were new to me, but I discovered they're called “high-low” threads, and provide several desirable characteristics for this sort of use.  In particular, they're easier to screw in (I can attest to that) and harder to pull out – nice combination!

Andrew Jackson...

Andrew Jackson...  Detail from the face of a $20 bill, at 10x.  The level of fine detail in the printing on U.S. paper currency is really quite remarkable...

I'm with Mark Twain on this one...

I'm with Mark Twain on this one...


More on the notion of fighting Ebola by flight bans...

More on the notion of fighting Ebola by flight bans...  I wrote about this, briefly, a few days ago.  Nate Silver (a statistician by trade) makes essentially the same points I did, but in much greater detail.

A reader asked me (by email) why not simply change the criteria?  Instead of banning flights from (say) Liberia, ban people from Liberia, as identified by their passports or visas.

That won't work, either, for very similar reasons.  It would only work for Liberian citizens trying to travel to the U.S.  It wouldn't work for naturalized Americans of Liberian descent (like, I believe, Thomas Duncan), as they'd have American passports.  It wouldn't work for American tourists, students, or Peace Corps workers leaving the area.  It wouldn't work for tourists from Europe who later travel to the U.S.  I'd like to have concrete data on the percentage of people on airplanes arriving in London from Liberia who are Liberian citizens, but I don't.  However, I do have some relevant experience: I have spent many, many hours in London's Heathrow airport and Frankfurt's airport, both of which are major hubs for airlines serving West Africa.  I have watched hundreds of aircraft from Africa disembarking.  I am certain that only a small percentage of those disembarking passengers were citizens of the departure country.  How?  It's very simple: they were overwhelmingly not black.  They were Caucasian, Chinese, Japanese, Indian, or ... some other race, not black.  A ban on people from Liberia would surely stop on a small percentage of potentially infected people from entering the U.S.

Underlying this notion of flight bans is the notion of a quarantine writ large.  If we want to quarantine West Africa, the place to do it is in West Africa, not in U.S. airports.  That would actually make sense, from the perspective of trying to control the epidemic.  So far as I know, there is no precedent for quarantining an entire country.  Liberia is a small country; its borders are only about 1,000 miles long.  I'm sure a concerted, coordinated international effort to quarantine the country could be accomplished.  Will it be?  Not likely, unless things get much worse...

I'm with Hale on this one...

I'm with Hale on this one...



Proud eagle...

Proud eagle...  On the back of a 1972 U.S. quarter (25¢ piece), at 60x.


It's a beautiful morning in Paradise, part 167...

It's a beautiful morning in Paradise, part 167...


A way to separate the parties...

A way to separate the parties...  As I've noted here quite a few times before, there generally isn't much daylight between the actual work product of Democratic or Republican candidates.  There's more, though still not all that much, between their articulated positions.  I stumbled across something today, though, that shows a much clearer difference: a chart showing what percentage of political ads on various networks are place by Republicans (red), Democrats (blue), or others (green).  The chart is fascinating:


There's a good fraction of those networks that I've never heard of before, which I'm sure exactly nobody finds surprising.  Just looking at the ones I knew (or could figure out from the name), it looks like the ad buy strategies of the two parties could boil down to this:

Democrats: buy ads on networks whose audience is dominated by women and young people

Republicans: buy ads on networks whose audience is dominated by men, older folks, and possibly business people

There's another way you could look at this, too:

Democrats: buy ads on networks with content that is mindless and entertainment-based

Republicans: buy ads on networks with content that engages the brain at least a little bit, or involves golf (a sport that I find very puzzling, as in I can't figure out why anyone would do it)

And there's yet a third way to look at it: the fact that either party is seeking voters on any of these venues smells an awful lot like ... doom...


Read 'em and weep...

Read 'em and weep...


Such a lovely thing...

Such a lovely thing...  It's Theraphosa blondi, a spider with a legs spanning over a foot across, and a body the size of a small puppy.  Read all about it here, including the bit about “a cloud of urticating hair”...

Melotte 15...

Melotte 15...  Star clusters and dust clouds and gasses, oh my!  This spectacular image was made by combining images of both visible and non-visible wavelengths, in false color.  Via APOD, of course...

You should all be envious...

You should all be envious ... because I just had a completely unrestrained Angie's breakfast.  What did I have?  Chicken-fried steak, eggs over easy, and a “scone” with honey butter.  It was brains-fell-out-on-the-table good, and the folks there were as friendly as always.  Now my biggest challenge is to avoid descending into a steak/egg/scone coma...