So this morning we set out for Hardware Ranch ... with every intent of getting some drone footage of the beautiful canyon on the way there. But when I got the drone out and started to set it up, I noticed that the propeller mount wasn't quite right – it wobbled alarmingly. So we gave up on the drone (again!) and just did some wildlife viewing. Didn't see much, though.
Once back home, I got the drone on the workbench and started poking at it. I quickly discovered the wobble problem: the screws I'd just installed the day before were already working their way loose. Loctite is required. Worse, though, I noticed some more of the grinding that I thought I'd gotten rid of. The more I tried rotating the motor back and forth, the worse this grinding seemed to get. I must have a piece of iron shaving (from drilling out the screw heads) stuck in there, attracted by the powerful permanent magnets in the motor's bell.
That led me to a bunch of googling. I found one guy – just one! – who took the motor apart for precisely the same reason. He needed some snap ring pliers and a homebrew shaft press to do it, but he managed to get his motor apart, got the shavings out, and then put it all back together. The surgery required, though, is pretty daunting, and I wouldn't be surprised if I broke something in the process. I'm expecting a spare motor in today's mail, so I'm going to replace that motor altogether, then try disassembling and fixing it. :) I'll have to pick up a couple tools to do it, but if I can really fix the motor it's probably worth it as the thing costs $80.
Meanwhile, I've removed the motor with the shavings in it. That is quite an involved process all by itself! Tomorrow, assuming I really do get the spare motor today, I'll install the spare and then I hope I'll be back in the air with the drone...
Thursday, August 16, 2018
37 years...
37 years... That's how long ago Debbie and I were married, in a pretty venue in Bonita, California. We had just Debbie's mom and a few friends there, seven or eight people in all. Went to the world's worst lakeside resort (at Lake Cuyamaca, east of San Diego) for our two-day honeymoon. Burgers for dinner. We loved it anyway. Hard to believe that she stuck around all those years, through good times and bad. But I'm very glad she did...
Even if she can't remember when our anniversary is. :)
Even if she can't remember when our anniversary is. :)
Wednesday, August 15, 2018
DEXA scan...
DEXA scan... I went in for a routine medical visit on Monday. In going through my medications, my doctor mentioned that she had recently read something surprising about people with Vitamin B12 issues (I have pernicious anemia): they have a higher risk for osteoporosis. She referred me to our local hospital to get that DEXA scan, which will measure the level of mineralization in my bones. This really surprised me, as on those few occasions in the past when I've had skeletal X-rays, the radiologist typically made some comment about my “elephant bones”, referring to how thick and heavy they were. The last thing I ever expected was to be thought of as “at risk” for osteoporosis.
I won't have the result until next week sometime.
The tech who did the DEXA scan, a nice young lady named Lisa, first took my weight and height. This was another shocking development. Not my weight, as I keep pretty close tabs on that. But my height! I've been 5' 10.5" tall since somewhere in the '60s. I've been measured a lot of times by a lot of people, most especially in the Navy (in the '60s). I was always 5' 10.5". This morning was the first time I've had my height measured in something like 20 years, though – and they measured it at 5' 8". Holy shrinking bones! I've lost 2.5" of height! When the hell did that happen?
The most surprising part of that, to me, is that I had utterly no idea it was happening.
This article suggests that I'm losing height at a faster than average rate. That doesn't sound good. Now I'm a bit anxious to get the results of that DEXA scan!
I won't have the result until next week sometime.
The tech who did the DEXA scan, a nice young lady named Lisa, first took my weight and height. This was another shocking development. Not my weight, as I keep pretty close tabs on that. But my height! I've been 5' 10.5" tall since somewhere in the '60s. I've been measured a lot of times by a lot of people, most especially in the Navy (in the '60s). I was always 5' 10.5". This morning was the first time I've had my height measured in something like 20 years, though – and they measured it at 5' 8". Holy shrinking bones! I've lost 2.5" of height! When the hell did that happen?
The most surprising part of that, to me, is that I had utterly no idea it was happening.
This article suggests that I'm losing height at a faster than average rate. That doesn't sound good. Now I'm a bit anxious to get the results of that DEXA scan!
So this happened yesterday...
So this happened yesterday... We visited the Post Office to pick up our mail, and I climbed back into our car and handed the mail to Debbie.
Me: Look, Jim and Michelle sent us a card!My wife has no idea when our wedding anniversary is. :)
Debbie: Oh, what's it for?
Me: ...
Debbie: Oh, your birthday!
Me: Uh ... no. My birthday is in September.
Debbie: Oh, our wedding anniversary!
Me: Yup. Do you know what date it is?
Debbie: The 10th?
Debbie: The 21st?
Debbie: The 11th?
Debbie: The 12th?
Debbie: The 15th?
Debbie: The 17th?
Me: ...
Tuesday, August 14, 2018
Well, that didn't work out quite as planned!
Well, that didn't work out quite as planned! As I was carrying our drone to the car last night, I snagged one of the propeller mounts on a stair rail – and just like that, I was out of (drone) action. I had spare parts (came with the package I bought), so I thought it would be a quick repair. However, in no time at all I'd managed to strip out the T8 Torx-head bolts that held the mount on. Dang it!
I put that aside and we went for our wildlife drive anyway. We saw a bald eagle (likely the same one we've been seeing, as it was in the same place near the Hyrum Power dam), lots and lots of fawns (just now starting to lose their spots), a great viewing of a pair of Sandhill Cranes, and the best viewing of a flock of cedar waxwings that we've ever had. Great!
Once I'd stripped the screws on the propeller mount, things got much trickier. First I had to cut away the already broken propeller mount, which is made of carbon-fiber reinforced resin. That took but a moment. Then I drilled out the two screw heads – tedious, but not difficult. However, in the process some steel chips worked their way into the motor, attracted by the powerful permanent magnets in them. After that happened, the motor no longer turned freely. Gulp.
I kept going, though, figuring I'd deal with the steel chips later. At this point I had roughly 3/16" of bolt shaft exposed. I got a pair of Vise-grips on that, and turned – and nothing. No movement at all! WTF? Some research on the web reveals that DJI (the drone manufacturer) routinely uses red Loctite on these bolts (possibly others, too). That stuff is like epoxy glue – no way are you going to turn that bolt, unless you heat it. Now that I had the plastic out of the way, heating was a possibility. I broke out my big soldering iron and heated one of the shafts up until the motor started getting uncomfortably warm. Applied Vise-grips again, and ... motion! I had to repeat the heat/Vise-grips cycle a few times, and this was tedious as heck, as I could only turn the bolt about 60° at a time because of other parts in the way. Eventually, though, success! Both the mounting bolts were out of the way.
Then I tried turning the motor by hand again. There was scraping and grinding as I did so, from those darned steel chips that made it into the motor. I put the new propeller mount in place, then I decided to try lighting off the drone to see if I could work the chips out by just running it for a while. A few minutes later, I had the motor spinning – and making a gosh-awful racket. But after about 30 seconds of this, it suddenly stopped racketing. After that, the motor spun freely and all appears to be well. Phew!
I have some foam rubber “booties” designed to protect those parts, and they will be installed from now on. I don't want to go through that again!
I put that aside and we went for our wildlife drive anyway. We saw a bald eagle (likely the same one we've been seeing, as it was in the same place near the Hyrum Power dam), lots and lots of fawns (just now starting to lose their spots), a great viewing of a pair of Sandhill Cranes, and the best viewing of a flock of cedar waxwings that we've ever had. Great!
Once I'd stripped the screws on the propeller mount, things got much trickier. First I had to cut away the already broken propeller mount, which is made of carbon-fiber reinforced resin. That took but a moment. Then I drilled out the two screw heads – tedious, but not difficult. However, in the process some steel chips worked their way into the motor, attracted by the powerful permanent magnets in them. After that happened, the motor no longer turned freely. Gulp.
I kept going, though, figuring I'd deal with the steel chips later. At this point I had roughly 3/16" of bolt shaft exposed. I got a pair of Vise-grips on that, and turned – and nothing. No movement at all! WTF? Some research on the web reveals that DJI (the drone manufacturer) routinely uses red Loctite on these bolts (possibly others, too). That stuff is like epoxy glue – no way are you going to turn that bolt, unless you heat it. Now that I had the plastic out of the way, heating was a possibility. I broke out my big soldering iron and heated one of the shafts up until the motor started getting uncomfortably warm. Applied Vise-grips again, and ... motion! I had to repeat the heat/Vise-grips cycle a few times, and this was tedious as heck, as I could only turn the bolt about 60° at a time because of other parts in the way. Eventually, though, success! Both the mounting bolts were out of the way.
Then I tried turning the motor by hand again. There was scraping and grinding as I did so, from those darned steel chips that made it into the motor. I put the new propeller mount in place, then I decided to try lighting off the drone to see if I could work the chips out by just running it for a while. A few minutes later, I had the motor spinning – and making a gosh-awful racket. But after about 30 seconds of this, it suddenly stopped racketing. After that, the motor spun freely and all appears to be well. Phew!
I have some foam rubber “booties” designed to protect those parts, and they will be installed from now on. I don't want to go through that again!
Sunday, August 12, 2018
A little catching up...
A little catching up... On Thursday evening we went on a wildlife viewing expedition, sans drone – what a mistake that was! Despite the smoke in the air (still very bad) and lots of traffic, we saw a lot of wildlife. The first photo below was a real surprise for us: an osprey, perched in a dead tree right on the road's shoulder, about two miles from the mouth of the canyon (not a place where we've seen the osprey before). Then just east of the holding pond, Debbie spotted a moose – a big bull (second photo), antlers in velvet, browsing on willow. Later we saw lots and lots of does with fawns (mostly twins), several young bucks, a bald eagle, Sandhill cranes (last photo), kingfishers, about ten million swallows (up at Miller's ranch), kestrels, and probably some other critters that I've forgotten. We're going to repeat the trip on Monday evening, this time with the drone. Of course we'll probably see nothing on that trip. :)
Our purchase of our friend and neighbor's property is proceeding rapidly. Closing is scheduled for next Wednesday. The real estate people involved seem a little befuddled by how easy the transaction has been – no series of offers/counter-offers, a handshake (literally!) agreement on price, all cash, no seller incentives – they almost don't know what to do. :) I have to line up a surveyor soon, to let us split up that lot into two pieces: one that we're keeping, and one that we'll be selling.
Debbie made us a memorable meal yesterday – we got fresh mussels from our grocery store, and she cooked them in a white wine, butter, and garlic base. Damned fine, they were! Next time we see them, we buy more – a pound between the two of us left us wanting more.
Friday night we went to the Cache County Fair and Rodeo, and had a grand time except for having sore butts and backs from sitting on the stadium seating for four hours. The barrel racing was again my favorite event – it was a very close competition this year! I just ordered us some folding stadium seats, as we seem to be doing this four or five times a year...
Saturday was sod day – our yard workers cut out a bunch of sick and dead grass and replaced it with new sod. They also prepped our “dead zone” – two acres of lawn-to-be. They're getting ready for seeding it all in a few days, after the abject failure of the seeding last fall.
Our purchase of our friend and neighbor's property is proceeding rapidly. Closing is scheduled for next Wednesday. The real estate people involved seem a little befuddled by how easy the transaction has been – no series of offers/counter-offers, a handshake (literally!) agreement on price, all cash, no seller incentives – they almost don't know what to do. :) I have to line up a surveyor soon, to let us split up that lot into two pieces: one that we're keeping, and one that we'll be selling.
Debbie made us a memorable meal yesterday – we got fresh mussels from our grocery store, and she cooked them in a white wine, butter, and garlic base. Damned fine, they were! Next time we see them, we buy more – a pound between the two of us left us wanting more.
Friday night we went to the Cache County Fair and Rodeo, and had a grand time except for having sore butts and backs from sitting on the stadium seating for four hours. The barrel racing was again my favorite event – it was a very close competition this year! I just ordered us some folding stadium seats, as we seem to be doing this four or five times a year...
Saturday was sod day – our yard workers cut out a bunch of sick and dead grass and replaced it with new sod. They also prepped our “dead zone” – two acres of lawn-to-be. They're getting ready for seeding it all in a few days, after the abject failure of the seeding last fall.
Thursday, August 9, 2018
Porcupine Reservoir...
One thing you'll notice around the shore line are what look a bit like the cliffs of Dover. They're not – they're the barren sides exposed as the level of the reservoir drops. The reservoir typically fills up with the runoff from melting snow in the mountains and the spring rains, hopefully being completely full by May. All summer long we get little rain, so as the irrigation draws water from the reservoir, its level falls. When the irrigation stops (typically in September or early October, depending on the weather), the reservoir will stop dropping and may even fill up slightly. The following spring, the cycle starts all over...
Wednesday, August 8, 2018
One good thing about getting really tired...
One good thing about getting really tired ... I can sleep! I was out for 7 hours last night, which is really unusual except when I'm taking diphenhydramine.
The photo at right is from the north side of our deck, showing the two hummingbird feeders I put up a few days ago. I found out about these a couple of years ago from my sister Holly. I bought them back then, but we didn't have a good place for them until our deck was done. Each of these feeders is 4' long, and has 44 “flowers” for the hummers to feed from. You might have noticed that there are no perches as are commonly seen on commercial hummingbird feeders. Instead, the hummers keep flying while they're feeding, and the “flowers” are at just the right angle for them to do so. This is how hummingbirds feed naturally – the usual commercial feeders require them to learn a new feeding behavior. So said the blurb about theses feeders, along with the claim that the hummers would be on the feeders quickly. They were! Less than five minutes after hanging the first feeder, we had a female checking it out and feeding from it. Now with both feeders up for the past few days, we have hummers on them all day long – as many as eight simultaneously, and the number keeps creeping up. Win!
The engineer in me can't help but notice a significant design flaw, though. The clear plastic tubing that forms most of the feeder is fairly thin-walled – and when the feeder is full, it bends in the middle. Clearly this will get worse over time, too. I'm going to purchase some sturdy metal to glue to the bottom, to solve that. If I don't, I doubt these things would last a year...
The photo at right is from the north side of our deck, showing the two hummingbird feeders I put up a few days ago. I found out about these a couple of years ago from my sister Holly. I bought them back then, but we didn't have a good place for them until our deck was done. Each of these feeders is 4' long, and has 44 “flowers” for the hummers to feed from. You might have noticed that there are no perches as are commonly seen on commercial hummingbird feeders. Instead, the hummers keep flying while they're feeding, and the “flowers” are at just the right angle for them to do so. This is how hummingbirds feed naturally – the usual commercial feeders require them to learn a new feeding behavior. So said the blurb about theses feeders, along with the claim that the hummers would be on the feeders quickly. They were! Less than five minutes after hanging the first feeder, we had a female checking it out and feeding from it. Now with both feeders up for the past few days, we have hummers on them all day long – as many as eight simultaneously, and the number keeps creeping up. Win!
The engineer in me can't help but notice a significant design flaw, though. The clear plastic tubing that forms most of the feeder is fairly thin-walled – and when the feeder is full, it bends in the middle. Clearly this will get worse over time, too. I'm going to purchase some sturdy metal to glue to the bottom, to solve that. If I don't, I doubt these things would last a year...
Tuesday, August 7, 2018
I am one tired hombre...
I am one tired hombre... I suspect my brother Scott is just as tired. The two of us “pruned” some branches off an old black willow along our irrigation canal. Some of these branches were 20" or so in diameter! We moved something like a ton of wood (brush and logs) from the tree to my now gigantic brush pile. Some of the individual logs were right at the limit of what I can lift, probably 160 or 170 pounds – and there were quite a few of them. Whew! Glad to be done with that!
Debbie fixed us up with a simple but lovely meal: roast chicken, baked potato, and asparagus. Yum!
After our meal we did a little drone work, including the first still photos we've taken with it. This was because Scott wanted some photographs of our yard, to assist in his landscape planning. The one at right is one of about 20 we took today. The side of the house facing the camera is the front of our house, and that's Scott's first landscaping project. There will be three trees in the front yard, and then the entire front needs landscaping. We're eager to see what he's going to come up with. Our directions to him are (a) don't be weird (in other words, no penguin-standing-on-its-head topiary), and (b) an informal English garden is the model. It's really exciting for us to finally be working on the landscaping after all the remodeling on the house itself...
Debbie fixed us up with a simple but lovely meal: roast chicken, baked potato, and asparagus. Yum!
After our meal we did a little drone work, including the first still photos we've taken with it. This was because Scott wanted some photographs of our yard, to assist in his landscape planning. The one at right is one of about 20 we took today. The side of the house facing the camera is the front of our house, and that's Scott's first landscaping project. There will be three trees in the front yard, and then the entire front needs landscaping. We're eager to see what he's going to come up with. Our directions to him are (a) don't be weird (in other words, no penguin-standing-on-its-head topiary), and (b) an informal English garden is the model. It's really exciting for us to finally be working on the landscaping after all the remodeling on the house itself...
Sunday, August 5, 2018
The drone leaves home ... and we feast again...
The drone leaves home ... and we feast again... Debbie and I ventured out to Blacksmith Fork Canyon this morning, and made two drone flights along the way. Our skies are full of smoke from wildfires in California, Nevada, and Utah (see pollution report at right; click to embiggen). That particle count is normally around 15 or 20 for us, and often below 5 – so the 132 reading is pretty bad. Even at short distances of a few hundred yards, the “fogginess” in the air is quite evident. Our eyes burned a bit, and I had a couple of coughing spells. In the videos you'll see that smoke, where normally we'd have perfectly clear visibility.
We spotted a bald eagle perched near the pond behind Hyrum Power's dam. As quickly as we could, we got the drone out, set it up, and attempted to capture some footage of the eagle – and we did! We also flew up alongside the angled bluff above the eagle, and shot a little footage of the dam and the pond behind it, all just for practice. The best parts are three short sequences at the start of the video. After that there's a blooper reel of sorts, which would, I'm sure, amuse anyone who actually knew what they were doing with this stuff.
Further out, near Hardware Ranch, there's what looks like an old mining road. It leads up to a couple of rock outcroppings – small bluffs, really. We've long thought this was a pair of abandoned mines. This morning we flew the drone over the road and the suspected mines locations to see what it really was – and now I think those are just rock outcroppings with animal trails leading around them. No mines. :)
Our first impression of flying the drone around in the back country to take video? It's going to be a lot of fun for both of us!
When we got home, Debbie whipped up a meal for us (at left) and my brother Scott, who's been slaving away pruning at our house. Oh, you should be so envious! Those are fresh Oregon sea scallops, broiled with a lemon/garlic/butter sauce and topped with lemon rinds and garlic. She's been making these for years, but it seems like every time she gets them even better than the time before. And of course it doesn't hurt a darned thing that we're now able to get fresh (never frozen) scallops. The vegetables are Brussels sprout sections and Bermuda onion pieces, coated with olive oil and seasoning, and roasted in the oven. Heavenly, every last bit of it! By the way, this (like everything Debbie cooks these days) is very low in sodium. We've been a very low sodium house now for almost two years. I've never liked very salty foods, but now after Debbie has got the spices-instead-of-salt down pat, I've gotten to the point where restaurant food tastes too salty to me much of the time – even places and dishes that I used to like just fine. I've been spoiled! And I'm convinced now that salt is just the easy way out – the “substitute” spices are superior to the salt!
Our first impression of flying the drone around in the back country to take video? It's going to be a lot of fun for both of us!
When we got home, Debbie whipped up a meal for us (at left) and my brother Scott, who's been slaving away pruning at our house. Oh, you should be so envious! Those are fresh Oregon sea scallops, broiled with a lemon/garlic/butter sauce and topped with lemon rinds and garlic. She's been making these for years, but it seems like every time she gets them even better than the time before. And of course it doesn't hurt a darned thing that we're now able to get fresh (never frozen) scallops. The vegetables are Brussels sprout sections and Bermuda onion pieces, coated with olive oil and seasoning, and roasted in the oven. Heavenly, every last bit of it! By the way, this (like everything Debbie cooks these days) is very low in sodium. We've been a very low sodium house now for almost two years. I've never liked very salty foods, but now after Debbie has got the spices-instead-of-salt down pat, I've gotten to the point where restaurant food tastes too salty to me much of the time – even places and dishes that I used to like just fine. I've been spoiled! And I'm convinced now that salt is just the easy way out – the “substitute” spices are superior to the salt!
Saturday, August 4, 2018
First dual controller flight!
Tomorrow morning we're going to pile all the drone gear in our car and head out to Blacksmith Fork Canyon. With luck, we'll find some deer or a nice bald eagle. Even if we don't see any wildlife, there are still a couple of landmarks we can take some video of...
Zoom lens test...
A key element of the wildlife photography capability is for Debbie to be able to control the camera independently of me piloting the drone. This morning I got all the equipment required for that together, set it all up, and tested it out. I had a bit of confusion trying to get it all linked up by radio, but once I did that it all worked just great! Debbie's controller has a stick that controls the camera's panning (back and forth movement), and another stick that controls the its pitch (up and down movement). She can tap the screen to set the focus and exposure for a particular place in the scene, and can use an on-screen “thumb wheel” to set the zoom level. The gimbal on the drone keeps the camera perfectly pointed in whatever direction she left it, so if she let's go of the controls, the camera stays pointed correctly – even if wind is buffeting the drone, or I move the drone around. Nice! We'll try operating the drone together later today, and I'll probably take some video of that. Unless it's laughably bad (not an improbable event!), I'll share it up here...
Friday, August 3, 2018
A (very) slight improvement...
First drone video...
First drone video... I won't be winning any prizes with this, but here it is. There's no audio because my video editing skills are lame and I don't know how to do it yet. :) The guy on a tractor raking hay into windrows is Scott Norman. He leases our south field from us to raise alfalfa, and that's the field he's working on. There's a scene where I fly over to an abandoned gravel quarry – that's roughly a half mile east of our house...
Thursday, August 2, 2018
Badgers and drones...
Badgers and drones... We had a bit of excitement here this morning, involving the badger at right. I heard the dogs losing their minds in the southeast corner of our fenced back yard, so I walked out to see what they'd found. It wasn't hard to figure out – this fellow was about 2 feet from four dogs, with a fence between them, and he was hissing, charging, and basically acting very obnoxious. When I approached him, as when taking this photo, he even charged me! As Bugs would say, what a maroon! I didn't have a gun at hand, but right nearby were some 10' lengths of 2" plastic conduit – just right for a badger bonker. I gave him a couple of whacks on his thick-skulled little head. He didn't like that much, but it got his attention – and then I used the conduit to prod him into the brush by our irrigation canal. I heard him snuffling away, and he didn't come back all day. If he does reappear, next time I'll greet him with my .22 rifle...
We had yard work going on the past couple of days, and I've been helping a bit on that. Our lawn contractor was here, and that took a bit of time. I also had a Tesla tech here both yesterday and today to finish up on some repairs. In between all that, I managed to finish unpacking my drone and it's accessories (creating a mountain of cardboard and packing materials in the process), getting it all assembled, all the firmware updated (there are a lot of computers in that thing!), and actually flying it. I've flown it for about an hour now, including about 20 minutes with the big, fancy, gimballed camera. I haven't actually taken any photos or video yet, just practiced with the camera. Even with a single controller it's not hard, but when we get Debbie on a separate controller to handle the big camera, it will be even easier. The picture from the gimballed camera is remarkably steady even in gusty winds like we had today. Oh, and I also made a distance test flight: about a half mile to an abandoned quarry, which I circled and then returned. I was quite relieved when the drone made it back to my vicinity, but the truth is the thing worked flawlessly even at that distance – and the first person view (FPV) camera made piloting it a breeze even at that distance.
I think I'll be ready to try flying it out in the boonies after just a few hours of practice...
We had yard work going on the past couple of days, and I've been helping a bit on that. Our lawn contractor was here, and that took a bit of time. I also had a Tesla tech here both yesterday and today to finish up on some repairs. In between all that, I managed to finish unpacking my drone and it's accessories (creating a mountain of cardboard and packing materials in the process), getting it all assembled, all the firmware updated (there are a lot of computers in that thing!), and actually flying it. I've flown it for about an hour now, including about 20 minutes with the big, fancy, gimballed camera. I haven't actually taken any photos or video yet, just practiced with the camera. Even with a single controller it's not hard, but when we get Debbie on a separate controller to handle the big camera, it will be even easier. The picture from the gimballed camera is remarkably steady even in gusty winds like we had today. Oh, and I also made a distance test flight: about a half mile to an abandoned quarry, which I circled and then returned. I was quite relieved when the drone made it back to my vicinity, but the truth is the thing worked flawlessly even at that distance – and the first person view (FPV) camera made piloting it a breeze even at that distance.
I think I'll be ready to try flying it out in the boonies after just a few hours of practice...
Tuesday, July 31, 2018
Nearly every day...
Nearly every day ... something happens that reinforces our happiness with our decision, five years ago, to move to northern Utah. Yesterday there were several things:
- I took one of my lawnmower's tires in to Hyrum Tire for repair. One of the owners (two brothers) dismounted the tire, noted that it had been previously repaired (by them), and took it upon himself to apply a double layer of patching – both to the new hole and to the older one. Then he searched for tougher tires that would fit the rims; unfortunately, none are available (naturally, I have a strange tire size). Then he charged me $12.79 and insisted on carrying the tire and wheel out to my car. Such a pleasant exchange, front-to-back!
- I took my old lawnmower back to Ipaco for repair. They had previously repaired it (in May), but when I got it home I discovered that it still had the same problem (blades stopped turning after about five minutes of mowing). After a short, pleasant conversation in which they got full details of the problem, they told me that their repairs were fully warranted and they took the mower back for repair. It should be done today or tomorrow. No hassle, just smiles!
- The Wild Birds Unlimited store in Salt Lake City called to confirm my address before they shipped an order I made online. Ten minutes later, the store manager called me back to suggest that I save myself some money by joining a “club” they have. That club costs $25 a year, but on just the order I placed it would save me over $30 – and it would save more on any future orders I placed. She went out of her way to note the possible savings, call me, and get permission to do so. Friendly and cheerful every step of the way, too.
- The Tesla service center in Salt Lake City called me to let me know that some parts on backorder for my Model X had come in. They wanted to arrange for their mobile tech to come out later this week, and needed to know what days and times would work for me. This sort of call would usually be just a direct question or two and you're done, but the fellow who called was friendly and engaged in some happy banter.
Sunday, July 29, 2018
Debbie and I...
Debbie and I ... made a trip this morning up past Hardware Ranch and part way to Ant Flats (our usual wildlife prowl). I slept very poorly last night, as expected (see previous post), so I didn't feel safe driving. We wanted to take our Model X because it's such an excellent ride for wildlife viewing, so ... Debbie drove it. This was only her second time behind the wheel of the Model X, and she's still quite intimidated by it. :) She did just fine, except that she flatly refused to back it into the garage upon our return.
We saw a lot of wildlife this morning! We got off to a great start when Debbie sighted a fawn, still in spots, just 20' or so from the road's edge (photo at right). Particularly surprising about this fawn was that it was all alone – no mom doe in sight. It looked healthy other than having a slight limp, and it appeared to be old enough to graze (if it had to feed itself), so probably the main risks for it are cars and large predators (especially mountain lions, which are reasonably common up here). We're hoping the mom was lurking about somewhere, afraid to come out while we were there.
A bit further on we spotted two more fawns, this time with two does (though from their behavior, we think the fawns were actually twins belonging to one of the does). Then on our way back out of Blacksmith Fork Canyon, we had a scare as a fawn crossed in front of an oncoming car, then in front of us – no more than 5' off our bumper. Debbie slammed on the brakes when she first spotted it, and if she had been even a fraction of a second later we'd have hit it for sure. The car beeped and booped, so we know it detected the fawn – but we're not sure if it braked before Debbie stomped the pedal.
We saw lots of birds!
On the way out toward Ant Flats, we spotted a bald eagle flying toward us at low altitude. It circled three times over a pasture just to the right of our car, so we had some rather nice naked-eye viewing. Later in the trip, as we drove up toward the generating station's holding pond, I spotted a flash of white above a rock maybe 40' higher than us and a couple hundred yards away. I thought it was a small white bird of some kind, but when I got my binoculars on it I discovered that it was the head of another bald eagle, perched behind the rock so that I couldn't see its body. We drove another quarter mile or so down the road and found a parking spot where we had a great view of its whole body. We could see why it was perched there: the thing was soaked! We hypothesize that it had dived into the holding pond to catch a fish (or perhaps steal one from another bird), got wet, and then flew up there to a nice perch for drying.
In addition to the eagles, we saw one cedar waxwing as it flew by on a journey, a mostly gray Great Blue heron, several belted kingfishers (including one with unusually bright and clean plumage), about a bazillion swallows, a lone northern harrier, lots of juvenile mallard ducks, and several Swainson's thrushes. We'd seen the latter before, but today was the first day we were able to identify them...
We saw a lot of wildlife this morning! We got off to a great start when Debbie sighted a fawn, still in spots, just 20' or so from the road's edge (photo at right). Particularly surprising about this fawn was that it was all alone – no mom doe in sight. It looked healthy other than having a slight limp, and it appeared to be old enough to graze (if it had to feed itself), so probably the main risks for it are cars and large predators (especially mountain lions, which are reasonably common up here). We're hoping the mom was lurking about somewhere, afraid to come out while we were there.
A bit further on we spotted two more fawns, this time with two does (though from their behavior, we think the fawns were actually twins belonging to one of the does). Then on our way back out of Blacksmith Fork Canyon, we had a scare as a fawn crossed in front of an oncoming car, then in front of us – no more than 5' off our bumper. Debbie slammed on the brakes when she first spotted it, and if she had been even a fraction of a second later we'd have hit it for sure. The car beeped and booped, so we know it detected the fawn – but we're not sure if it braked before Debbie stomped the pedal.
We saw lots of birds!
On the way out toward Ant Flats, we spotted a bald eagle flying toward us at low altitude. It circled three times over a pasture just to the right of our car, so we had some rather nice naked-eye viewing. Later in the trip, as we drove up toward the generating station's holding pond, I spotted a flash of white above a rock maybe 40' higher than us and a couple hundred yards away. I thought it was a small white bird of some kind, but when I got my binoculars on it I discovered that it was the head of another bald eagle, perched behind the rock so that I couldn't see its body. We drove another quarter mile or so down the road and found a parking spot where we had a great view of its whole body. We could see why it was perched there: the thing was soaked! We hypothesize that it had dived into the holding pond to catch a fish (or perhaps steal one from another bird), got wet, and then flew up there to a nice perch for drying.
In addition to the eagles, we saw one cedar waxwing as it flew by on a journey, a mostly gray Great Blue heron, several belted kingfishers (including one with unusually bright and clean plumage), about a bazillion swallows, a lone northern harrier, lots of juvenile mallard ducks, and several Swainson's thrushes. We'd seen the latter before, but today was the first day we were able to identify them...
Saturday, July 28, 2018
Trouble in diphenhydramine-land...
Trouble in diphenhydramine-land... If for some inexplicable reason you're a regular reader of this blog, then you may remember that early this year I discovered the insomnia-destroying effects (for me, anyway) of diphenhydramine. That's the active ingredient in the allergy medicine Benadryl, but for me it's been working great for six months as a way for me to regularly sleep through the night. That's been a new experience for me, as I'd been an insomniac for my entire prior adult life. After some experimentation, I settled on a 12.5 mg dose, which I've been taking every night, an hour or two before I go to sleep.
The last week or so this has not been working. The logical conclusion, reinforced by some online reading, is that my body has developed a tolerance for the drug, and I'd have to increase the dose for it to continue being effective. Of course, that's the first step of the classic dependency cycle, and I refuse to get on that particular train to destruction. So ... last night's dose will be my last, at least for a while. I suspect my insomnia will return with a vengeance in the short term, then after a few days or weeks I'll be back to my pre-diphenhydramine norm.
This makes me very sad, as I've been greatly enjoying all the benefits of a full night's sleep ... and I don't know any other way to get that...
The last week or so this has not been working. The logical conclusion, reinforced by some online reading, is that my body has developed a tolerance for the drug, and I'd have to increase the dose for it to continue being effective. Of course, that's the first step of the classic dependency cycle, and I refuse to get on that particular train to destruction. So ... last night's dose will be my last, at least for a while. I suspect my insomnia will return with a vengeance in the short term, then after a few days or weeks I'll be back to my pre-diphenhydramine norm.
This makes me very sad, as I've been greatly enjoying all the benefits of a full night's sleep ... and I don't know any other way to get that...
The downing...
The downing... Last year the honey locust in our back yard was looking pretty bad, sick with something. We were quite sad about that, as that tree was a favorite. This spring it was clearly dead – we waited and hoped that some leaves would pop out, but there wasn't a one. Less than 50' away is an identical honey locust, planted at the same time (around 15 years ago), and it is doing just fine. We really don't know what killed the one in the back yard, though we suspect girdling by lawnmower.
Anyway, we finally decided it was time for this thing to come down, so on Thursday I set up my tractor with a 1" nylon rope to put some constant tension on it, so that it would come down away from the house. The photo at right (click to embiggen) shows this setup. The nylon rope is fairly “stretchy”, which is great in this application. I could easily position the tractor to put something like 500 pounds of “pull” on the rope – plenty to ensure that when I sawed the tree off low on the trunk, it would fall at least roughly toward the tractor. By the time the tree fell enough to release the tension on the rope, it would be headed down in the direction I wanted it to go. This is far better than trying the same thing with something that didn't stretch at all, such as a chain. That sort of connection would release the tension as soon as the tree moved even one inch – and then I wouldn't know what direction it was coming down at all.
When cutting down a tree that's been tensioned like this, there are still some ways for things to go horribly wrong. The one that worries me the most (and which I've experienced once, unfortunately) is that the trunk snaps and kicks back in a random direction. This snapping can throw the trunk straight at you while you're sawing. Possibly even worse, it can throw the chain saw. So whenever I do this, I am very careful and I cut very slowly so that I can watch the progress. I also cut at an angle from the side away from the tensioning downward to the opposite side. This angled cut makes it less likely that the trunk will kick very far backward. Generally there will be at least a few seconds warning before the remaining trunk starts to give way, and that's enough time to get yourself and your saw out of the way. I make sure I have good footing, a clear escape path, and that I'm well off to the side (as the most likely kickback direction is 180° from the direction the tree is tensioned. That's what I did this time, and all went well as you can see from the post-downing photo at left. I got myself and my saw out of the way in good time, and the tree fell almost exactly where I intended. The rest of the job was just cutting up and hauling away, which my brother Scott and I did the next day...
Anyway, we finally decided it was time for this thing to come down, so on Thursday I set up my tractor with a 1" nylon rope to put some constant tension on it, so that it would come down away from the house. The photo at right (click to embiggen) shows this setup. The nylon rope is fairly “stretchy”, which is great in this application. I could easily position the tractor to put something like 500 pounds of “pull” on the rope – plenty to ensure that when I sawed the tree off low on the trunk, it would fall at least roughly toward the tractor. By the time the tree fell enough to release the tension on the rope, it would be headed down in the direction I wanted it to go. This is far better than trying the same thing with something that didn't stretch at all, such as a chain. That sort of connection would release the tension as soon as the tree moved even one inch – and then I wouldn't know what direction it was coming down at all.
When cutting down a tree that's been tensioned like this, there are still some ways for things to go horribly wrong. The one that worries me the most (and which I've experienced once, unfortunately) is that the trunk snaps and kicks back in a random direction. This snapping can throw the trunk straight at you while you're sawing. Possibly even worse, it can throw the chain saw. So whenever I do this, I am very careful and I cut very slowly so that I can watch the progress. I also cut at an angle from the side away from the tensioning downward to the opposite side. This angled cut makes it less likely that the trunk will kick very far backward. Generally there will be at least a few seconds warning before the remaining trunk starts to give way, and that's enough time to get yourself and your saw out of the way. I make sure I have good footing, a clear escape path, and that I'm well off to the side (as the most likely kickback direction is 180° from the direction the tree is tensioned. That's what I did this time, and all went well as you can see from the post-downing photo at left. I got myself and my saw out of the way in good time, and the tree fell almost exactly where I intended. The rest of the job was just cutting up and hauling away, which my brother Scott and I did the next day...
Thursday, July 26, 2018
Willows, drones, and other things...
Willows, drones, and other things... My brother Scott finished pruning the weeping willow in our back yard yesterday, and it looks much nicer than it did before (a couple of views below). Now I can mow under it, and our little tree farm (visible in the second photo) gets a bit more light than it had been getting. Also in the second photo you can see the irrigation going on the field to our north (the one I'm in the process of buying). Our Paradise Irrigation Company water was off yesterday while they were de-mossing; today its back on and up to 40 psi – so we're getting lots of water down on the field today!
For several years I've periodically looked into the notion of buying a drone, primarily for photography and videography of natural landscapes and possibly some wildlife (especially nesting birds). The main thing that's stopped me from buying one is really the fear of losing the entire investment when I crash the drone 30 seconds after unpacking it.
I've had some experience flying remote-controlled airplanes, and I know first-hand how confusing it can be to control something when you're standing some distance away. This is a big contributor to the fear-of-crashing. I'd be much more confident in controlling a drone if it had a camera pointing forward, giving me a view while flying as if I was a pilot in the aircraft. These have recently become available, even acquiring their own name in the process: a “first person view” camera. Such a live video view, as if I were a pilot in the aircraft, is a big confidence builder for me.
Another factor that looms large amongst the risks of owning a drone is the fear of losing the thing should there be a problem with the radio link, the battery running low, etc. This is another area where the better drones have made fantastic strides. Many drones now have a robust return-to-home feature wherein if something goes wrong, they fly themselves back to the point where they took off, land, and wait for you to come back. Integral to that capability is the ability to avoid obstacles – and again, the better drones have amazingly good systems for detecting things they need to fly around. Some of these detectors are acoustic (ultrasonic rangefinders), some are infrared rangefinders, some are short-wavelength radars, and some are full-on optical rangefinders that use the same stereoscopic vision system that humans use. Some drones have a combination of several of these.
Put all that together, and the result is that one can buy a drone today that is likely to survive a while. I'm certain I could still kill it, but I'd have to try a lot harder than I would have just a few years ago.
There are even some drones available that have a separate, steerable, gimballed, vibration-isolated camera for shooting high-quality photos and video – while at the same time having all the safety and reliability features I described above. Some of these cameras are very impressive in their own right, and a few of them use MFT (Micro Four Thirds) lenses – meaning there is a huge selection of high quality glass for them.
Yesterday Debbie caught me doing the check-out-the-drone thing again, and she told me to just go get one. So I finally did it – I ordered a DJI Inspire 2 with the Zenmuse X5S camera option. It should arrive within a couple weeks...
For several years I've periodically looked into the notion of buying a drone, primarily for photography and videography of natural landscapes and possibly some wildlife (especially nesting birds). The main thing that's stopped me from buying one is really the fear of losing the entire investment when I crash the drone 30 seconds after unpacking it.
I've had some experience flying remote-controlled airplanes, and I know first-hand how confusing it can be to control something when you're standing some distance away. This is a big contributor to the fear-of-crashing. I'd be much more confident in controlling a drone if it had a camera pointing forward, giving me a view while flying as if I was a pilot in the aircraft. These have recently become available, even acquiring their own name in the process: a “first person view” camera. Such a live video view, as if I were a pilot in the aircraft, is a big confidence builder for me.
Another factor that looms large amongst the risks of owning a drone is the fear of losing the thing should there be a problem with the radio link, the battery running low, etc. This is another area where the better drones have made fantastic strides. Many drones now have a robust return-to-home feature wherein if something goes wrong, they fly themselves back to the point where they took off, land, and wait for you to come back. Integral to that capability is the ability to avoid obstacles – and again, the better drones have amazingly good systems for detecting things they need to fly around. Some of these detectors are acoustic (ultrasonic rangefinders), some are infrared rangefinders, some are short-wavelength radars, and some are full-on optical rangefinders that use the same stereoscopic vision system that humans use. Some drones have a combination of several of these.
Put all that together, and the result is that one can buy a drone today that is likely to survive a while. I'm certain I could still kill it, but I'd have to try a lot harder than I would have just a few years ago.
There are even some drones available that have a separate, steerable, gimballed, vibration-isolated camera for shooting high-quality photos and video – while at the same time having all the safety and reliability features I described above. Some of these cameras are very impressive in their own right, and a few of them use MFT (Micro Four Thirds) lenses – meaning there is a huge selection of high quality glass for them.
Yesterday Debbie caught me doing the check-out-the-drone thing again, and she told me to just go get one. So I finally did it – I ordered a DJI Inspire 2 with the Zenmuse X5S camera option. It should arrive within a couple weeks...
Subscribe to:
Posts (Atom)












