Mom would have loved our afternoon meal today... Yesterday when we went grocery shopping, we picked up two pounds of fresh mahi mahi – one big fillet and one medium-sized one. We grilled mine with some dill and garlic, then I made two enormous sandwiches out of it. Besides the (quite wonderful) cheese-and-onion bun that Macey's bakes in-store, the only other thing on the sandwich was a bit of homemade tartar sauce. Those sandwiches darned near made my brains fall out!
Over 20 years ago, Debbie and I flew my mom and dad out to Hawai'i where we spent a really fun two weeks with them. It was on that trip that we discovered Cafe 100 – the locally-owned fast food joint in Hilo. They have many delicious items on their menu, but my mom and I instantly spotted the one for us: grilled mahi mahi sandwiches. Those were made with perhaps 4 or 5 ounces of fish, on a slightly sweet bun that Cafe 100 has made just for their fish sandwiches. There's a bit of tartar sauce and maybe (I've forgotten) a lettuce leaf or two. But that's it; nothing to overpower the delicate flavor of that grilled mahi mahi. We visited Cafe 100 multiple times, and once when I was very hungry after a big hike, I ate four of those sandwiches. My mom never ate four of them at one sitting, but she did have two on several occasions. She talked about those sandwiches for years afterwards.
Well, the mahi mahi sandwiches I had today were the first ones I ever had that beat the pants off the Cafe 100 sandwiches. A new bar has been set! Plus, these were monster sandwiches by comparison. I can't believe I ate so much fish! Sure was good, though...
Debbie fixed her mahi mahi as an add-on to a lovely salad: greens, cherry tomatoes, avocado, and that mahi mahi. She looked quite happy as she ate it. :)
Sunday, July 2, 2017
Paradise ponders: return to Paradise edition...
Paradise ponders: return to Paradise edition... Well, we had quite the busy few days!
Early on Wednesday morning, as planned, we set off on our trip to Kalispell, Montana to pick up metal work completed for us by Lazy K Wrought Iron. To get to our lodgings in Whitefish, Montana, we had to drive about 700 miles. With a nominal range of 285 miles per battery charge, that's obviously going to require some recharging along the way. What may not be quite so obvious is that we wouldn't actually get that much range from the battery, as we were moving along (most of the time) at 80 to 85 MPH, and we had lots of elevation change to contend with. In actual practice, we got around 210 to 220 miles per full charge – but we rarely had a fully charged battery. Why? Because the supercharging stations (like the Pocatello, Idaho station at right) aren't located in precisely the right place to let us do that (they're closer together), so we don't actually have to fully charge the battery to get from one station to another. On the way up, we stopped to recharge in Pocatello, Idaho Falls, Lima, Butte, and Missoula. On the way back, we managed to skip Pocatello. Typically we were in the supercharger for 20 to 30 minutes. As with our first trip to Kalispell, we actually found these stops to be pleasant breaks and not a hassle at all.
Our trip up was uneventful, but full of beautiful scenery. Our favorite bit was the trip around the western side of Flathead Lake, in Montana. Debbie snapped a few photos of that area as we zoomed by:
We pulled into our lodgings around 6:30 pm, tossed our luggage into the room, and immediately headed for the Tupelo Grille for dinner. We'd discovered this place on our February trip, and enjoyed it so much that we didn't even peruse the other restaurants in town. We had shrimp and crawfish cakes for our appetizer (first photo). Debbie had the halibut special (center photo) and I had chicken and dumplings (last photo). That was a very strange chicken and dumplings, but it sure was delicious! Debbie's halibut was perfectly grilled, with a crust of herbs that we couldn't identify, but thoroughly approved of.
Our “room” at the lodge was a one-bedroom suite, with a full kitchen, a laundry, a dining room, a living room, a huge bathroom, and the bedroom. It must have been 800 or so square feet all together; it felt like being in a large apartment. The first photo shows the view from our balcony; second photo is roughly the same view at sunset.
In the morning we stopped at the Buffalo Cafe for breakfast. That meal was, unfortunately, less than memorable. Then we headed for the Going-to-the-Sun Road in Glacier National Park. This is a place I've been to several times, though the most recent time was over 40 years ago. Debbie had never been there. I got a bit of a shock as we approached the park's entrance: there was a traffic jam waiting to get in – it took us 25 minutes just to get through the gate. The amount of traffic in the park was difficult for me to absorb, and so vastly different than my memories of the place. Several locals told me that my memories were completely correct – Glacier National Park was “discovered” in the late '80s and early '90s, and the number of people visiting has skyrocketed. One consequence of this is a dearth of wildlife anywhere near the roads – we saw just two deer, one pika, and a couple of half-dead squirrels. The scenery, though, was even better than in my memories – especially the waterfalls. I didn't remember the dozens and dozens of huge waterfalls, nearly everywhere you look. Some photos from our trip through the park:
On the way back into Kalispell (to pick up our metal work), we passed by a little retail nursery called Angie's Greenhouse. The old jalopy decorated with flowers caught our eye, and we stopped to walk through it. They have a huge selection of color plants, mostly annuals, along with hundreds of different lawn ornaments nearly all of which are made from rusty sheet metal (sometimes painted). It's well worth a walk-through if you happen to be in the area...
Our last stop for the day was Lazy K Wrought Iron. We expected to pick up our stuff at their workshop, but wanted to see the retail store that we'd missed on our last trip. So we first went to downtown Kalispell to the retail store, which when we walked in was staffed by two of the Lipka kids with huge smiles. A few minutes later, Abigail (their mom) walked in, and we discovered that all our stuff was right there, in the retail store – except for the filling station door, which they'd left at the power coating place to minimize the chance of damaging it. So we hopped in the car and made a quick trip about four miles south, picked up the door (which fit nicely in the back of the Model X!), and then zipped back up to the retail store. There, a parade of Lipkas helped us load the car with the 31 large pieces of metal they'd built for us, along with dozens of bolts and lag screws they'd had powder-coated to match what they'd built. We even had a passer-by stop to help with one particularly awkward piece. Abigail gave me some paracord and I lashed the whole pile down. There was a lot of metal in the back, nearly filling the available space in the Model X. We really couldn't have carried much more!
After departing the store, we headed back to the Tupelo Grille for another fine meal. We had mussels for an appetizer, and I forgot to take a photo of them. The menu had a mussel appetizer listed, but it included harissa, a sauce that's too danged hot for me. We asked the waiter if the kitchen could leave that out, and he came back with a counter-proposal: the chef would whip up something easy for us, with a white wine sauce. It was wonderful. I'd give a lot to be able to “whip up” something like that! :) Debbie's entree was trout stuffed with shrimp and crawfish, mine was elk meatloaf. We ended up splitting the entrees half-and-half; both were superb. The mashed potatoes that came with the elk meatloaf were the best I've had in years, just the way I like them (lumpy, buttery, herbed).
Friday morning we departed early, grabbed some coffee from Cowgirl Coffee (for a very necessary infusion of caffeine) just down the street from our lodging, and then we were on the way home. Despite all the weight in the back of the Model X, there was only a slightly difference in its handling and no measurable difference in its mileage. I guess most of the energy needed to drive at freeway speeds really is needed to overcome drag (which the extra weight doesn't affect) and not in elevation change or acceleration. Of course the regenerative braking helps reduce the energy needed for the latter two reasons, too. The drive home was uneventful except for a couple of crazy drivers that scared us. The load in back never rattled or shifted at all. We got home, quite tired, around 7:30 pm...
Saturday morning, after spending some time with the dogs, I went to work unloading the car. The two lousy photos below will give you a flavor for how much stuff we had packed in there: a total of seven layers of metal parts, all packed carefully in blankets and foam sheets. It took me almost two hours to get it all out and put away. There was no damage to anything, which was very nice to see. We did have one problem, though: the railing they'd built for our sun room stairs doesn't fit. :( The Lipkas are already all over that, insisting on making a new one for us at their expense, even though it seems to me we share equal blame. We'll have to find a way to get even with them for that! :)
Yesterday morning we went grocery shopping, and picked up a couple beautiful chunks of big-eye tuna. Debbie made some avocado poke (using a recipe from the grocery store) with it, and it was just wonderful. She served it over steamed brown rice. Took both of us right back to Hawai'i. We'll definitely be doing that again!
Early on Wednesday morning, as planned, we set off on our trip to Kalispell, Montana to pick up metal work completed for us by Lazy K Wrought Iron. To get to our lodgings in Whitefish, Montana, we had to drive about 700 miles. With a nominal range of 285 miles per battery charge, that's obviously going to require some recharging along the way. What may not be quite so obvious is that we wouldn't actually get that much range from the battery, as we were moving along (most of the time) at 80 to 85 MPH, and we had lots of elevation change to contend with. In actual practice, we got around 210 to 220 miles per full charge – but we rarely had a fully charged battery. Why? Because the supercharging stations (like the Pocatello, Idaho station at right) aren't located in precisely the right place to let us do that (they're closer together), so we don't actually have to fully charge the battery to get from one station to another. On the way up, we stopped to recharge in Pocatello, Idaho Falls, Lima, Butte, and Missoula. On the way back, we managed to skip Pocatello. Typically we were in the supercharger for 20 to 30 minutes. As with our first trip to Kalispell, we actually found these stops to be pleasant breaks and not a hassle at all.
Our trip up was uneventful, but full of beautiful scenery. Our favorite bit was the trip around the western side of Flathead Lake, in Montana. Debbie snapped a few photos of that area as we zoomed by:
We pulled into our lodgings around 6:30 pm, tossed our luggage into the room, and immediately headed for the Tupelo Grille for dinner. We'd discovered this place on our February trip, and enjoyed it so much that we didn't even peruse the other restaurants in town. We had shrimp and crawfish cakes for our appetizer (first photo). Debbie had the halibut special (center photo) and I had chicken and dumplings (last photo). That was a very strange chicken and dumplings, but it sure was delicious! Debbie's halibut was perfectly grilled, with a crust of herbs that we couldn't identify, but thoroughly approved of.
Our “room” at the lodge was a one-bedroom suite, with a full kitchen, a laundry, a dining room, a living room, a huge bathroom, and the bedroom. It must have been 800 or so square feet all together; it felt like being in a large apartment. The first photo shows the view from our balcony; second photo is roughly the same view at sunset.
In the morning we stopped at the Buffalo Cafe for breakfast. That meal was, unfortunately, less than memorable. Then we headed for the Going-to-the-Sun Road in Glacier National Park. This is a place I've been to several times, though the most recent time was over 40 years ago. Debbie had never been there. I got a bit of a shock as we approached the park's entrance: there was a traffic jam waiting to get in – it took us 25 minutes just to get through the gate. The amount of traffic in the park was difficult for me to absorb, and so vastly different than my memories of the place. Several locals told me that my memories were completely correct – Glacier National Park was “discovered” in the late '80s and early '90s, and the number of people visiting has skyrocketed. One consequence of this is a dearth of wildlife anywhere near the roads – we saw just two deer, one pika, and a couple of half-dead squirrels. The scenery, though, was even better than in my memories – especially the waterfalls. I didn't remember the dozens and dozens of huge waterfalls, nearly everywhere you look. Some photos from our trip through the park:
On the way back into Kalispell (to pick up our metal work), we passed by a little retail nursery called Angie's Greenhouse. The old jalopy decorated with flowers caught our eye, and we stopped to walk through it. They have a huge selection of color plants, mostly annuals, along with hundreds of different lawn ornaments nearly all of which are made from rusty sheet metal (sometimes painted). It's well worth a walk-through if you happen to be in the area...
Our last stop for the day was Lazy K Wrought Iron. We expected to pick up our stuff at their workshop, but wanted to see the retail store that we'd missed on our last trip. So we first went to downtown Kalispell to the retail store, which when we walked in was staffed by two of the Lipka kids with huge smiles. A few minutes later, Abigail (their mom) walked in, and we discovered that all our stuff was right there, in the retail store – except for the filling station door, which they'd left at the power coating place to minimize the chance of damaging it. So we hopped in the car and made a quick trip about four miles south, picked up the door (which fit nicely in the back of the Model X!), and then zipped back up to the retail store. There, a parade of Lipkas helped us load the car with the 31 large pieces of metal they'd built for us, along with dozens of bolts and lag screws they'd had powder-coated to match what they'd built. We even had a passer-by stop to help with one particularly awkward piece. Abigail gave me some paracord and I lashed the whole pile down. There was a lot of metal in the back, nearly filling the available space in the Model X. We really couldn't have carried much more!
After departing the store, we headed back to the Tupelo Grille for another fine meal. We had mussels for an appetizer, and I forgot to take a photo of them. The menu had a mussel appetizer listed, but it included harissa, a sauce that's too danged hot for me. We asked the waiter if the kitchen could leave that out, and he came back with a counter-proposal: the chef would whip up something easy for us, with a white wine sauce. It was wonderful. I'd give a lot to be able to “whip up” something like that! :) Debbie's entree was trout stuffed with shrimp and crawfish, mine was elk meatloaf. We ended up splitting the entrees half-and-half; both were superb. The mashed potatoes that came with the elk meatloaf were the best I've had in years, just the way I like them (lumpy, buttery, herbed).
Friday morning we departed early, grabbed some coffee from Cowgirl Coffee (for a very necessary infusion of caffeine) just down the street from our lodging, and then we were on the way home. Despite all the weight in the back of the Model X, there was only a slightly difference in its handling and no measurable difference in its mileage. I guess most of the energy needed to drive at freeway speeds really is needed to overcome drag (which the extra weight doesn't affect) and not in elevation change or acceleration. Of course the regenerative braking helps reduce the energy needed for the latter two reasons, too. The drive home was uneventful except for a couple of crazy drivers that scared us. The load in back never rattled or shifted at all. We got home, quite tired, around 7:30 pm...
Saturday morning, after spending some time with the dogs, I went to work unloading the car. The two lousy photos below will give you a flavor for how much stuff we had packed in there: a total of seven layers of metal parts, all packed carefully in blankets and foam sheets. It took me almost two hours to get it all out and put away. There was no damage to anything, which was very nice to see. We did have one problem, though: the railing they'd built for our sun room stairs doesn't fit. :( The Lipkas are already all over that, insisting on making a new one for us at their expense, even though it seems to me we share equal blame. We'll have to find a way to get even with them for that! :)
Yesterday morning we went grocery shopping, and picked up a couple beautiful chunks of big-eye tuna. Debbie made some avocado poke (using a recipe from the grocery store) with it, and it was just wonderful. She served it over steamed brown rice. Took both of us right back to Hawai'i. We'll definitely be doing that again!
Tuesday, June 27, 2017
Paradise ponders: dishwashers and pumps edition...
Paradise ponders: dishwashers and pumps edition... Yesterday there was an important event for us – our dishwasher got fixed! A week or so ago, it stopped working with an error code. Naturally the manual doesn't say a thing about error codes, so we had to call the repairman (Jim at Darrell's Appliances). At this point poor Jim has been out here so often that he's practically family. :) We've had a string of older appliances (that we inherited when we bought this house) failing, generally at inopportune moments. In this case, though, it was our beautiful Bosch dishwasher that we bought last September. Jim quickly figured out that the error code meant we had a leak somewhere in the dishwasher. After largely disassembling it, he was able to locate the leak: in the “diverter valve”, which controls which interior spray unit is spraying at any given moment. He got it on order, and yesterday afternoon came back to actually perform the repair. This entailed turning the dishwasher upside-down so he could get to the diverter valve, which is on the very bottom of the machine. The photo at right shows him as he's clearing other parts out of the way before swapping the new diverter valve in. When he was halfway through putting it all back together, I found a white plastic part on the floor – and neither of us could figure out where the heck that had come from. No matter; the dishwasher worked fine once he got it all put back together. Now we have a dishwasher again! Yay!
Tomorrow morning Debbie and I are leaving on a three day trip to Kalispell to pick up a bunch of metal parts made for us by Lazy K Wrought Iron. It's one day up there, a day to fool around in the area, and a day to come back. Last time we did it in just two days, and that was a bit more hectic than we'd prefer. We're both looking forward to this.
At the same time, the sale of my mom's old house in Virginia is closing on Friday, while we're on the road (figures, right?). We're supposed to get documents this morning that have to be notarized and Fedexed back, but as I write this (at 11 am) we still have not received the documents. Gulp! It's been a long and harrowing process selling her house, and I'd sure hate it if some timing problem with Fedex screwed it up...
Yesterday the advance team from Glenn's Electric came out to scout out the irrigation pump situation. Other than thinking the cedar shed was way too nice to house a pump, they found no problems. They also brought the little pressure tank needed for the system (the grey vertical cylinder sitting on the shelf at right). This morning I built that shelf for the pressure tank, to free up a bit of room in the shed. There are two (quite large!) filters left to be installed, and they're the one thing in the shed that will need regular servicing (cleaning), so I'd like to have lots of room around them.
I suspect blogging will be intermittent to non-existent for the next few days...
Tomorrow morning Debbie and I are leaving on a three day trip to Kalispell to pick up a bunch of metal parts made for us by Lazy K Wrought Iron. It's one day up there, a day to fool around in the area, and a day to come back. Last time we did it in just two days, and that was a bit more hectic than we'd prefer. We're both looking forward to this.
At the same time, the sale of my mom's old house in Virginia is closing on Friday, while we're on the road (figures, right?). We're supposed to get documents this morning that have to be notarized and Fedexed back, but as I write this (at 11 am) we still have not received the documents. Gulp! It's been a long and harrowing process selling her house, and I'd sure hate it if some timing problem with Fedex screwed it up...
Yesterday the advance team from Glenn's Electric came out to scout out the irrigation pump situation. Other than thinking the cedar shed was way too nice to house a pump, they found no problems. They also brought the little pressure tank needed for the system (the grey vertical cylinder sitting on the shelf at right). This morning I built that shelf for the pressure tank, to free up a bit of room in the shed. There are two (quite large!) filters left to be installed, and they're the one thing in the shed that will need regular servicing (cleaning), so I'd like to have lots of room around them.
I suspect blogging will be intermittent to non-existent for the next few days...
Sunday, June 25, 2017
Paradise ponders: visitor edition...
Paradise ponders: visitor edition... Well, Aleck L. showed up as planned, late Friday afternoon. He left this morning. We had such an enjoyable visit, even though it was (much) shorter than we'd have liked! Hopefully we'll live long enough for him to come visit us again. :) Unless we scared him...
We helped him with a long list of “firsts”: first times that he'd done something. Those included:
We helped him with a long list of “firsts”: first times that he'd done something. Those included:
- Dinner at the Black Pearl
- Drinking delicious Utah spring water
- Driving a tractor
- Riding an ATV
- Visiting Hardware Ranch, Blacksmith Fork Canyon, and the road to Ant Flats
- Walking in Cache Valley's fields
- Seeing a week-old calf
- Petting some goats
- Learning that a horse's nose is velvety
- Seeing how farmers irrigate their fields
- Dinner at Maddox Ranch House
- Attending a rodeo! (the Hyrum Star-Spangled Banner rodeo)
Friday, June 23, 2017
Paradise ponders: potted plant, vanishing power cords, and oodles of hay edition...
Paradise ponders: potted plant, vanishing power cords, and oodles of hay edition... At right is our south field as of yesterday evening. Scott N., the fellow who leases the field from us, cut and baled the field earlier in the week. That's more hay extracted than we've ever seen come off that field, and by a pretty good margin (close to double the previous best yield). There are two reasons that I know of for that. First, we had a lot of rain early in the season. Second, because he was so busy with the other fields he leases, Scott was quite late getting to the mowing of our field. The grass in our field was over 3 feet high when he finally mowed it down. That translates into lots of bales of hay! I saw Scott while he was baling and gave him a wave; he waved back with an ear-to-ear grin. :)
Debbie and I spent yesterday and today mainly working on getting plants in place on our porches and our balcony. We've got a total of nine big pots in three places. Five of them are on our balcony (photos below). We put drip irrigation onto these pots. There's a hose bib almost immediately under the balcony, but we didn't want to have an ugly hose showing against the side of the house. To solve that problem, we ran the hose up a gutter rain spout – that worked great! The hose pops out of the gutter a mere 6" from where we needed it on the balcony, and the bottom side is hidden by shrubbery. Perfect! The drip irrigation is visible in the photos below, but it's hard to see...
Yesterday I tackled a project that's been in the queue for quite a while. We've got a couple of “bug lights” in the house to combat the box elder bugs, house flies, and yellow jackets that wander into the house through various means. These lights are what restaurants use to keep flies down. They're ultraviolet lights (to attract bugs) with flypaper immediately below them. It's kind of amazing how well such a simple thing works – we put them up last year, and after about a week we basically never see bugs any more. The one drawback to them is that they require a power cord. Our original installation had the power cords dangling straight down to an outlet, which means that we had a power cord stretched out against the wall – not exactly the most attractive thing. Last week I had an idea of how to fix that, by installing a new outlet box right behind the triangular art deco bottom part of the light fixture. That part happens to be just barely big enough to hide a one-gang outlet box, and it's also hollow so the cord could be tucked into there. Below you can see the finished results: the power cords are gone, and the means by which I accomplished that are completely hidden from view. Win!
Debbie's been decorating our sun room, even as the cats get more and more comfortable in there. Some photos for you:
We eagerly anticipating the arrival of a friend we haven't seen for several years: Aleck L. He should be here later this afternoon, and he's staying through mid-day on Sunday. I met Aleck when we worked together at ServiceNow about eight years ago, and we've had a delightful friendship since then. While we've been frequently in touch with him, we haven't actually seen Aleck for over three years now. It will be great to have some time with him!
Debbie and I spent yesterday and today mainly working on getting plants in place on our porches and our balcony. We've got a total of nine big pots in three places. Five of them are on our balcony (photos below). We put drip irrigation onto these pots. There's a hose bib almost immediately under the balcony, but we didn't want to have an ugly hose showing against the side of the house. To solve that problem, we ran the hose up a gutter rain spout – that worked great! The hose pops out of the gutter a mere 6" from where we needed it on the balcony, and the bottom side is hidden by shrubbery. Perfect! The drip irrigation is visible in the photos below, but it's hard to see...
Yesterday I tackled a project that's been in the queue for quite a while. We've got a couple of “bug lights” in the house to combat the box elder bugs, house flies, and yellow jackets that wander into the house through various means. These lights are what restaurants use to keep flies down. They're ultraviolet lights (to attract bugs) with flypaper immediately below them. It's kind of amazing how well such a simple thing works – we put them up last year, and after about a week we basically never see bugs any more. The one drawback to them is that they require a power cord. Our original installation had the power cords dangling straight down to an outlet, which means that we had a power cord stretched out against the wall – not exactly the most attractive thing. Last week I had an idea of how to fix that, by installing a new outlet box right behind the triangular art deco bottom part of the light fixture. That part happens to be just barely big enough to hide a one-gang outlet box, and it's also hollow so the cord could be tucked into there. Below you can see the finished results: the power cords are gone, and the means by which I accomplished that are completely hidden from view. Win!
Debbie's been decorating our sun room, even as the cats get more and more comfortable in there. Some photos for you:
We eagerly anticipating the arrival of a friend we haven't seen for several years: Aleck L. He should be here later this afternoon, and he's staying through mid-day on Sunday. I met Aleck when we worked together at ServiceNow about eight years ago, and we've had a delightful friendship since then. While we've been frequently in touch with him, we haven't actually seen Aleck for over three years now. It will be great to have some time with him!
Wednesday, June 21, 2017
Paradise ponders: all kinds of stuff edition...
Paradise ponders: all kinds of stuff edition... I hardly know where to start on this one!
I guess last night, when we had a beautiful scene on the Wasatch Mountains to our east just before the sun dropped down below the Wellsville Mountains to our west. The photos below were shot from my office windows. Gorgeous, it was...
Yesterday morning, bright and early, the fellows from Golden Spike Electric showed up to finish the job of wiring our filling station. All that had remained was wiring the explosion-proof “whip” to connect the pumps to power. The photo at right shows the completed unit. It all works just great! We filled the diesel tank of my tractor (7 gallons) in under 30 seconds. And no clumsy 5 gallon cans to deal with! Woo hoo! There are some leaks that showed up after we pressurized the system with the pumps, but the plumbers who did the job will be here soon to fix those. We have our own filling station, off-road diesel and ethanol-free gas!
I worked for several hours yesterday wiring up the pump controller in my cedar shed. That also involved several hours of looking for parts, mostly 8 gauge wire in the appropriate assortment of colors. That wasn't so easy to find! The first photo below shows the controller mounted to the wall, cover off. If you're not familiar with these controllers, they're interesting gadgets. This model takes up to 40 amps single phase 60 Hz 240 VAC as its input, and provides up to 30 amps three phase variable frequency 240 VAC as its output. The output frequency is controlled by a pressure sensor, and the output is intended to drive a centrifugal pump. In my case that will be a 5HP pump, and we're going to keep the pressure at a constant 65 PSI. The device is based on switching technology, making it both quite small and remarkably efficient (>95%). It's controlled by a computer (of course!), and has several interesting programmable features. Of interest to me are two inputs that can be used to enable/disable the pump, and an output that can tell some other device that the pump is running. There's also a serial connection that can provide much more detailed information. The second photo below shows the finished installation. Input power comes in on the lower left, output through the flexible conduit that will connect to the pump when it's delivered. The pump will sit on the pad you see below and right of the controller. That pad is sitting on 1" thick anti-vibration pads, which hopefully will keep the vibration from the pump down to levels that won't shake my cedar shed apart! :)
Debbie and I took our friend Michelle H. out to lunch at the Black Pearl, where we all had sushi (perfect for a blazing hot day like yesterday was!). She'd never had sushi with raw fish before, but she had one bite of Debbie's roll that included a layer of hamachi. She liked it. :)
The sprinkler guys worked hard all day long, and got a lot done. I'd say they're well over half-way finished with the trenching and pipe installation. Our yard looks like some mutant gopher is wreaking vengeance upon us – trenches are everywhere! Toward the end of the day they went to test a new section but couldn't get any water. With a little investigation, we discovered that the Paradise Irrigation Company had turned off the water while they de-mossed the canal (something they do several times each summer). They neglected to warn us, though, so we were taken by surprise. It's back on now...
In the afternoon, Debbie spotted some really dramatic looking clouds and rain to the north of us. I looked at the weather radar and saw that it was pouring up there – so we decided to chase the storm. We hopped in the Model X and zipped northward, never making it closer than the outer edge of any storm. No matter, the dramatic lighting made for some beautiful views. We went up to the Cherry Peak ski resort (first time either of us had ever been there), and the drive back was full of views to the west. The valley was brightly lit, intermittently through broken cloud cover. Where we were was in cloud shadow. It was around 7 pm, so the sun was low and the slanted light made for some very dramatic lighting of the valley floor. On the way home we stopped at Aggie's for an ice cream cone. That was a nice way to end the day...
I guess last night, when we had a beautiful scene on the Wasatch Mountains to our east just before the sun dropped down below the Wellsville Mountains to our west. The photos below were shot from my office windows. Gorgeous, it was...
Yesterday morning, bright and early, the fellows from Golden Spike Electric showed up to finish the job of wiring our filling station. All that had remained was wiring the explosion-proof “whip” to connect the pumps to power. The photo at right shows the completed unit. It all works just great! We filled the diesel tank of my tractor (7 gallons) in under 30 seconds. And no clumsy 5 gallon cans to deal with! Woo hoo! There are some leaks that showed up after we pressurized the system with the pumps, but the plumbers who did the job will be here soon to fix those. We have our own filling station, off-road diesel and ethanol-free gas!
I worked for several hours yesterday wiring up the pump controller in my cedar shed. That also involved several hours of looking for parts, mostly 8 gauge wire in the appropriate assortment of colors. That wasn't so easy to find! The first photo below shows the controller mounted to the wall, cover off. If you're not familiar with these controllers, they're interesting gadgets. This model takes up to 40 amps single phase 60 Hz 240 VAC as its input, and provides up to 30 amps three phase variable frequency 240 VAC as its output. The output frequency is controlled by a pressure sensor, and the output is intended to drive a centrifugal pump. In my case that will be a 5HP pump, and we're going to keep the pressure at a constant 65 PSI. The device is based on switching technology, making it both quite small and remarkably efficient (>95%). It's controlled by a computer (of course!), and has several interesting programmable features. Of interest to me are two inputs that can be used to enable/disable the pump, and an output that can tell some other device that the pump is running. There's also a serial connection that can provide much more detailed information. The second photo below shows the finished installation. Input power comes in on the lower left, output through the flexible conduit that will connect to the pump when it's delivered. The pump will sit on the pad you see below and right of the controller. That pad is sitting on 1" thick anti-vibration pads, which hopefully will keep the vibration from the pump down to levels that won't shake my cedar shed apart! :)
Debbie and I took our friend Michelle H. out to lunch at the Black Pearl, where we all had sushi (perfect for a blazing hot day like yesterday was!). She'd never had sushi with raw fish before, but she had one bite of Debbie's roll that included a layer of hamachi. She liked it. :)
The sprinkler guys worked hard all day long, and got a lot done. I'd say they're well over half-way finished with the trenching and pipe installation. Our yard looks like some mutant gopher is wreaking vengeance upon us – trenches are everywhere! Toward the end of the day they went to test a new section but couldn't get any water. With a little investigation, we discovered that the Paradise Irrigation Company had turned off the water while they de-mossed the canal (something they do several times each summer). They neglected to warn us, though, so we were taken by surprise. It's back on now...
In the afternoon, Debbie spotted some really dramatic looking clouds and rain to the north of us. I looked at the weather radar and saw that it was pouring up there – so we decided to chase the storm. We hopped in the Model X and zipped northward, never making it closer than the outer edge of any storm. No matter, the dramatic lighting made for some beautiful views. We went up to the Cherry Peak ski resort (first time either of us had ever been there), and the drive back was full of views to the west. The valley was brightly lit, intermittently through broken cloud cover. Where we were was in cloud shadow. It was around 7 pm, so the sun was low and the slanted light made for some very dramatic lighting of the valley floor. On the way home we stopped at Aggie's for an ice cream cone. That was a nice way to end the day...
Subscribe to:
Posts (Atom)