A great day for a bonfire... It was cloudy and drizzly, exactly as forecast. From a safety perspective, that's perfect weather for a big bonfire – no matter what happens, I wouldn't set the valley on fire. :) I started the fire with a bit of packing material and a bag full of shredded documents (those burn hot!), and within 60 seconds of striking my first match I had a roaring fire going (first photo), despite the steady drizzle. I worked steadily at this for about 3 hours, dumping 18 large forkfuls of brush on the fire. Each one of those was over a cubic yard, compacted – I'd guess around 25 or 30 cubic yards of compressed brush in all. The tractor did all the heavy lifting while at the same time keeping me at a comfortable distance from the fire. That was one hot fire – so hot that I could see raindrops flashing into steam before they even hit the bonfire. When it rained heavily (which it did only briefly), that steam made a sort of dome around the fire. As I write this the fire is down to the last embers. I've spread it out over 100 square feet or so to cool. Done!
Sunday, April 2, 2017
Paradise ponders, all banged up and blackberries edition...
Paradise ponders, all banged up and blackberries edition... The area where I live is a big berry growing area, and the biggest of the berry farms is a mile from our house. When they're in season it would be hard to beat our local berries. But they're certainly not in season right now, so when I read this Neoneocon post about wonderful fresh blackberries at (of all places!) Walmart, I knew I'd have to try them.
She was talking about blackberries by Driscoll's, a company that grows blackberries in Mexico and is working hard to improve them. More on their genetic work here. And if you, like me, had no idea what a °Bx is, here's an explanation (it's sugar content, basically).
So yesterday we were in our local Walmart, and Debbie thought to check the produce counter. The Driscoll's berries were there! I bought two pints. This morning I poured about a half pint into my morning muesli. Heaven, I tell you. Heaven. Heaven is Rosehill's decadent Creamline milk on Bob's Red Mill muesli with Driscoll's blackberries generously mixed in. That's it, exactly!
For the past year, our two crate-trained puppies (Cabo and Mako) have been getting old, mangled towels as their bedding material. We started out with an actual dog bed for them, but they shredded them within seconds. So old dead towels has been their fate. Yesterday we decided to try them with beds again, so we hied ourselves to Walmart and bought a couple of inexpensive, washable stuffed beds for them. Last night was the first experiment. Two things happened, both of them good. First thing: the beds survived unscathed. Second thing: the puppies did not wake us at two or three AM, as has been their wont. Instead, we slept in until almost eight AM. If you know us, then you know that's like normal people sleeping in until two PM or so. :) That was the most restful night's sleep I've had in quite a few months, and no drugs or alcohol was involved. Could be a coincidence ... but it could be those beds. Oh, how I hope it's the beds!
I worked on the sun room stairs most of yesterday. The first part of the day was sanding: 60, 80, and 100 grit on the belt sander, then 220 grit on the random orbital sander. By the time I was done with that, you could have used the surface of those stairs as a mirror. Then, per my lovely bride's instructions, I purposefully ruined it. :) What she really wanted for those stairs was reclaimed wood, but obtaining pieces of a suitable species of reclaimed wood in the desired dimensions would have been both challenging and outrageously expensive. So I'm “manufacturing” some simulated reclaimed wood through a process of prolonged beatings and some creative finishing. Yesterday was the beatings part.
In the first photo below you can see most of my basic tools: a fairly random collection of clean hardware, and a polyurethane-and-lead-shot dead blow hammer. The dead blow hammer is much easier to control than an ordinary hammer, and the relatively soft head splatters the hardware much less. I also used one other tool, not pictured: a small (5 ounce) ball peen hammer, to make some dents.
I got into a very mechanical, repetitive mode while doing this: hammering with my right hand while randomly moving the hardware about with my left. Every 60 seconds or so I stopped and collected splattered hardware off the floor, which also gave my right arm a bit of a break. Altogether I spent about three hours hammering away, and in the last photo you can see a closeup of the results. It's enough to make a grown woodworker cry, with that beautiful hunk of redwood wrecked...
The next step is bleaching, with a two-part bleach system of sodium hydroxide and hydrogen peroxide. That work needs to be done outdoors, and today (with gloomy skies rain in our forecast) is not the day for that. So today I will be burning the giant pile of brush I collected last year. I got my burn permit (online here, instantly delivered, and free – so different than California!) and I'm all ready to go...
She was talking about blackberries by Driscoll's, a company that grows blackberries in Mexico and is working hard to improve them. More on their genetic work here. And if you, like me, had no idea what a °Bx is, here's an explanation (it's sugar content, basically).
So yesterday we were in our local Walmart, and Debbie thought to check the produce counter. The Driscoll's berries were there! I bought two pints. This morning I poured about a half pint into my morning muesli. Heaven, I tell you. Heaven. Heaven is Rosehill's decadent Creamline milk on Bob's Red Mill muesli with Driscoll's blackberries generously mixed in. That's it, exactly!
For the past year, our two crate-trained puppies (Cabo and Mako) have been getting old, mangled towels as their bedding material. We started out with an actual dog bed for them, but they shredded them within seconds. So old dead towels has been their fate. Yesterday we decided to try them with beds again, so we hied ourselves to Walmart and bought a couple of inexpensive, washable stuffed beds for them. Last night was the first experiment. Two things happened, both of them good. First thing: the beds survived unscathed. Second thing: the puppies did not wake us at two or three AM, as has been their wont. Instead, we slept in until almost eight AM. If you know us, then you know that's like normal people sleeping in until two PM or so. :) That was the most restful night's sleep I've had in quite a few months, and no drugs or alcohol was involved. Could be a coincidence ... but it could be those beds. Oh, how I hope it's the beds!
I worked on the sun room stairs most of yesterday. The first part of the day was sanding: 60, 80, and 100 grit on the belt sander, then 220 grit on the random orbital sander. By the time I was done with that, you could have used the surface of those stairs as a mirror. Then, per my lovely bride's instructions, I purposefully ruined it. :) What she really wanted for those stairs was reclaimed wood, but obtaining pieces of a suitable species of reclaimed wood in the desired dimensions would have been both challenging and outrageously expensive. So I'm “manufacturing” some simulated reclaimed wood through a process of prolonged beatings and some creative finishing. Yesterday was the beatings part.
In the first photo below you can see most of my basic tools: a fairly random collection of clean hardware, and a polyurethane-and-lead-shot dead blow hammer. The dead blow hammer is much easier to control than an ordinary hammer, and the relatively soft head splatters the hardware much less. I also used one other tool, not pictured: a small (5 ounce) ball peen hammer, to make some dents.
I got into a very mechanical, repetitive mode while doing this: hammering with my right hand while randomly moving the hardware about with my left. Every 60 seconds or so I stopped and collected splattered hardware off the floor, which also gave my right arm a bit of a break. Altogether I spent about three hours hammering away, and in the last photo you can see a closeup of the results. It's enough to make a grown woodworker cry, with that beautiful hunk of redwood wrecked...
The next step is bleaching, with a two-part bleach system of sodium hydroxide and hydrogen peroxide. That work needs to be done outdoors, and today (with gloomy skies rain in our forecast) is not the day for that. So today I will be burning the giant pile of brush I collected last year. I got my burn permit (online here, instantly delivered, and free – so different than California!) and I'm all ready to go...
Saturday, April 1, 2017
Paradise ponders, special request gluey liverwurst edition...
Paradise ponders, special request gluey liverwurst edition... Because one of you just had to ask, here's the redwood sanding dust and glue filler material I've been using. The first photo shows a nifty blue silicone glue dish I picked up a few weeks ago, with a pile of redwood “flour” and a blob of Titebond III glue. The second photo shows the stuff after mixing with a putty knife. It's got roughly the color and texture of liverwurst, though it smells much better. :) I mix it fairly thick so that I can press it into cracks with the putty knife, then scrape it level with the same knife.
Once you mix it up you've got about 10 minutes of working time. Cleanup is crazy easy: just scrape the excess you can easily extract into a trash can, then wash it up under warm water. It could hardly be any easier than that! Once it hardens for 24 hours, the stuff is easy to sand and paint. One lesson I've learned: you'll want to press it into the cracks as hard as you possibly can with the putty knife, so that the paste infiltrates the rough sides of the crack. Adherence is much better that way...
Once you mix it up you've got about 10 minutes of working time. Cleanup is crazy easy: just scrape the excess you can easily extract into a trash can, then wash it up under warm water. It could hardly be any easier than that! Once it hardens for 24 hours, the stuff is easy to sand and paint. One lesson I've learned: you'll want to press it into the cracks as hard as you possibly can with the putty knife, so that the paste infiltrates the rough sides of the crack. Adherence is much better that way...
Friday, March 31, 2017
Paradise ponders, mud, mueseli, and Musk edition...
The story of SpaceX (the company that made the Falcon 9) is a powerful argument for the primacy of capitalism as the engine behind the advancement of mankind. Their goal from founding was to lower the cost of exploiting space (whether for manned or unmanned missions) by creating relatively simple reusable rockets. Prior to SpaceX, all rockets were thrown away after a single use – and each of those rockets cost many millions of dollars. The floor of the Atlantic Ocean east of Cape Canaveral is littered with the wreckage of thousands of such used-once rockets. Our government space agency (NASA) insisted for decades that the notion of a reusable rocket was impossible on the face of it. Later they changed their tune a bit, and said it might be possible but the development cost would be prohibitive. Now NASA is a big customer of SpaceX, who did what NASA said was impossible – and did it with a tiny fraction of NASA's budget for a single year. If they had any honor, NASA would close their ludicrously expensive development facilities and turn over their development to SpaceX and its competitors. I won't hold my breath on that one.
Anyway, a tip of the hat to the entire SpaceX team this morning for a job spectacularly well done. The founder and CEO of SpaceX is Elon Musk, who is also the founder of PayPal, Solar City and Tesla Motors, as well as the originator of the Hyperloop idea and most recently the launch of Neuralink. If you were looking for support for the Great Man theory of history, his story would be a pretty good place to start. :)
A couple of weeks ago I went to our optometrist for an eye exam, mainly because my glasses weren't doing the job any more – especially close up. My prescription had changed significantly, as I've previously posted about. Last week I received my new glasses and wore them for a week. They were significantly better for close up work, so much so that I could wear and forget them for all my woodworking, computer work, and reading at distances greater than a foot or so. There was, however, one small problem: my distance vision was compromised during the daytime – and at night was downright horrible. So back to the optometrist I went, and without any hesitation he re-examined me, decided I needed to change my distance prescription slightly, and ordered new lenses for me. All this was at no cost to me. My new glasses should be here on Monday or Tuesday next week.
Yesterday Mark T. and his helper Dave went to work on the trench for the new line of risers we're putting outside our back yard fence. About an hour after they started (and made great progress!), the sky opened up and the rain commenced. Within a half hour, the nice firm soil they'd been working with turned into something closer to peanut butter – and the surface an oily semi-liquid form of mud. They parked the trencher and left; there really wasn't any other choice. Now things will have to dry out for a day or two before they can go back to work. Of course, we have more rain in the forecast for today and Sunday, so the drying out may take a bit longer!
Last week I came across something I'd actually completely given up on ever finding in the U.S.: quality muesli that wasn't sweetened (or at least, wasn't very sweet). I've been eating hot cereals from Bob's Red Mill ever since I moved up here. Last week, looking over the display of their cereals, I spotted this muesli – and saw that the ingredients contained no added sugar or corn syrup. The only sweeteners were dates and raisins. If you're of fan of traditional muesli (which you can easily find in Europe), you're gonna love this stuff. Highly recommended!
I finished all the milling to be done on the stairs yesterday. The first two photos show the jig and results of milling the end of the big landing (this will be the side facing our bedroom door). The second two show the jig and results of milling a groove in the ribs to hold the cross-member that will prevent them from wobbling. These were the last bits of milling on the entire project; now all I have left is sanding, beating (to simulate use), bleaching, and finishing. :)
This afternoon we'll be heading to Los Primos for a special treat. Our waitress on Tuesday told us that they'll be making Salvadoran stuffed peppers as a special today. Recipes we found online convinced us that these were certain to be a delicious feast – so off we'll go! Hopefully we'll be bringing our friend Michelle H. too...
Thursday, March 30, 2017
Stairs, continued...
Stairs, continued... Just finished milling out the four grooves on the underside of the two steps that will accommodate the ribs. It all came out very nicely! It's kind of amazing what you can do with a router and a couple of straight edges...
Then I did a trial fit of the steps onto the ribs; first time I've done that. I had to sand about 1/64" off of one of the ribs for it to fit into the groove, but once I did that: voila! That's a good approximation of what the stairs will look like once installed. There's a cross-member going between the two ribs, and it will be (barely) visible. The finish will, of course, dramatically change the appearance. But so far as the shape of the stairs goes, this is a very good approximation...
Then I did a trial fit of the steps onto the ribs; first time I've done that. I had to sand about 1/64" off of one of the ribs for it to fit into the groove, but once I did that: voila! That's a good approximation of what the stairs will look like once installed. There's a cross-member going between the two ribs, and it will be (barely) visible. The finish will, of course, dramatically change the appearance. But so far as the shape of the stairs goes, this is a very good approximation...
“Just another bad mutation...”
Wednesday, March 29, 2017
Stairs ... a little machining...
Stairs ... a little machining... So this evening I jigged up a router template (first photo) to cut one of the grooves in the bottom of the stairs, just the big landing step for now. Both steps are in the pipe clamps. The other clamps are holding the jig in place, and the bags of lead shot are ensuring that the jig lies down flat on the step. In the second photo you can see the result after I ran the router through the template (but before I cleaned up). It took three passes to cut a half inch deep groove, 1.5" wide. I cut the groove a tad longer than it actually needs to be, so that the rib will fit in nicely without worrying about the radius of the router bit. After I cleaned out the groove with compressed air, I did a test fit of the rib – perfect fit!
Let the trenching begin!
Let the trenching begin! I've been trying for two years now to get sprinklers installed in our yard. I could write several thousand words just describing all the various things that have gone wrong on the three separate attempts I've made. But today is a red-letter day on this project, because today the first trenching on the project occurred.
If I were to stop right there, you'd think that great things were likely happening. But about 30 seconds after I snapped the last photo below, an alarm started sounding on the skid-steer – the engine coolant was approaching a critical high temperature. Oh, noz! A little quick detective work on Mark T.'s part showed that there was a coolant leak, and that the coolant level was low. Mark tells me that today's work is the first time any of this gear has been used since last fall, and he's had coolant leaks develop over the winter before. So now he's off to get some more coolant, and to gather his tools to find and fix the leak. Sigh.
Ignoring that little problem, though, his trenching machine is a pretty cool little gadget. It's powered hydraulically, through the enormous hydraulic pump on the skid-steer: 24 GPM vs. the 5.5 GPM on my tractor, despite the nearly identical horsepower rating of the machines. The teeth on the trencher drag soil to the surface, where an auger scoots it out of the way to the left of the driver. It makes a very neat trench about 6" wide, and it does so quite quickly compared with a backhoe. On the other hand, it can only do skinny little trenches – if you need one any wider than 6", you're out of luck...
If I were to stop right there, you'd think that great things were likely happening. But about 30 seconds after I snapped the last photo below, an alarm started sounding on the skid-steer – the engine coolant was approaching a critical high temperature. Oh, noz! A little quick detective work on Mark T.'s part showed that there was a coolant leak, and that the coolant level was low. Mark tells me that today's work is the first time any of this gear has been used since last fall, and he's had coolant leaks develop over the winter before. So now he's off to get some more coolant, and to gather his tools to find and fix the leak. Sigh.
Ignoring that little problem, though, his trenching machine is a pretty cool little gadget. It's powered hydraulically, through the enormous hydraulic pump on the skid-steer: 24 GPM vs. the 5.5 GPM on my tractor, despite the nearly identical horsepower rating of the machines. The teeth on the trencher drag soil to the surface, where an auger scoots it out of the way to the left of the driver. It makes a very neat trench about 6" wide, and it does so quite quickly compared with a backhoe. On the other hand, it can only do skinny little trenches – if you need one any wider than 6", you're out of luck...
Paradise ponders, Medicare edition...
Paradise ponders, Medicare edition... So yesterday Debbie and I visited Sam Winward, our health insurance agent. He's been very helpful to us the past couple of years, helping us navigate the (many) challenges of Obamacare insurance for older individuals. Yesterday was the day we'd set aside for him to educate us about Medicare. I turn 65 this year, so it's time for me to join that system. Sam told me last year that I was really going to like switching to Medicare, so I wasn't too worried about what I'd learn today.
Though there are a mind-boggling number of options available (unlike with Obamacare!), it didn't take long for us to home in on a low-deductible Part F plan. While this was the most expensive option available, the price is so low (roughly $400/month for me, $265 of which is the baseline Medicare premium) compared with our current plan, and the benefits so much better, that it was basically a complete no-brainer. When I say the benefits were so much better, I mean: nationwide network of providers, no deductible, no co-pays, large drug formulary, no caps on hospitalization or physical therapy, and so on.
How is this even possible at such a low cost? Well, fundamentally it's because of two things:
Right after that meeting, we went to Los Primos for what is becoming our Tuesday afternoon ritual: a meal of their outstanding beef and vegetable soup. After we'd seated ourselves, the waitress we see most often (but who wasn't serving us yesterday) came over to say hello. We ended up having a nice discussion about, of all things, stuffed peppers. It turns out that stuffed peppers are something of a Salvadoran specialty, and they're making them on Friday. If they're anything like these, they look great!
Though there are a mind-boggling number of options available (unlike with Obamacare!), it didn't take long for us to home in on a low-deductible Part F plan. While this was the most expensive option available, the price is so low (roughly $400/month for me, $265 of which is the baseline Medicare premium) compared with our current plan, and the benefits so much better, that it was basically a complete no-brainer. When I say the benefits were so much better, I mean: nationwide network of providers, no deductible, no co-pays, large drug formulary, no caps on hospitalization or physical therapy, and so on.
How is this even possible at such a low cost? Well, fundamentally it's because of two things:
- The baseline Medicare premium is heavily subsidized by the Medicare taxes we all pay on wages. For me, that's a little over a quarter million dollars over my working life. That's far more than would be required to subsidize my health insurance, so as an above-average wage earner my taxes subsidizing a lot of other people's insurance as well.
- The Part F supplemental is mainly insuring against the risk of exceeding the baseline Medicare's caps (especially for hospitalization). That part of it resembles an old-fashioned major medical policy – the kind of policy I really wish we could have now instead of this #%^(&$# Obamacare policy we have.
Right after that meeting, we went to Los Primos for what is becoming our Tuesday afternoon ritual: a meal of their outstanding beef and vegetable soup. After we'd seated ourselves, the waitress we see most often (but who wasn't serving us yesterday) came over to say hello. We ended up having a nice discussion about, of all things, stuffed peppers. It turns out that stuffed peppers are something of a Salvadoran specialty, and they're making them on Friday. If they're anything like these, they look great!
Tuesday, March 28, 2017
The day I have to wear a tie to fly...
The day I have to wear a tie to fly ... is the day I'll stop flying!
2.7 Billion views...
2.7 Billion views... This says something about today's world, but I have no idea what! This is the most-viewed video on YouTube. Here's a list of the top 500 videos, ranked by number of views. Nearly all are music videos by performers I've never even heard of, much less listened to...
Monday, March 27, 2017
Our man-killing window holes are now covered...
Our man-killing window holes are now covered... And very nice-looking they are! These are the two covers that we traveled to Kalispell, Montana to pick up. My brother Scott helped me install them today. Both of them fit perfectly – another outstanding piece of work from the wonderful folks at Lazy K Wrought Iron!
I don't think I'll go out of my way to try this particular delicacy...
This stuff is from Sweden, it's called surströmming, and here's more than you ever wanted to know about it. Watching the video is enough to convince me that Sweden should be quarantined from the rest of humanity, permanently. First Volvos, then Abba, now surströmming? That's three strikes, and they should be out!
Paradise ponders, burgers and Foyle's edition...
Paradise ponders, burgers and Foyle's edition... We had kind of a lazy day yesterday. I finished some chores in the house, built the second rib for the stairs, and then came inside for our afternoon meal: burgers. That is, I had a burger (at right). That's 3/4 pound of Macey's 85/15 burger (all that fat makes it delicious!), on a Macey's Asiago-and-onion roll, with avocado, ketchup, and sweet pickle relish. Yum! Debbie made her share of the ground beef into an enormous taco salad, low in sodium but apparently very tasty, as she ate the entire (gigantic!) thing.
After that meal we were so full that any resembling ambition flew off to an obscure country in southwest Asia. So we crawled upstairs (slowly and carefully), and watched the last three Foyle's War episodes in a binge. That's five hours of television, something I haven't done for decades. The very last episode is a real shocker, ending with (literally) a big bang. We're kind of sorry to be done with it. But no matter, at our age we'll probably forget all about it within a few weeks, and can start it over as though it were brand new to us. :)
Today's big project for me is to help my brother Scott with his taxes. I finished mine last week, except for the filing. Doing my taxes never fails to put me in a bad mood, but the trip to Montana immediately following really helped pick me up. In the future, I'm going to have to plan something nice for the few days immediately following tax prep. It will help tamp down the anger I can't help feeling as I watch my hard-earned dollars being stolen by the government so they can waste it on something I don't believe in.
Before my brother gets here, I'm working on the stairs project. I did an hour or so of sanding before I came up to write this post, and I'll probably go do some more in a little while. Sanding is amazingly relaxing, and it's very good arm exercise. :)
After that meal we were so full that any resembling ambition flew off to an obscure country in southwest Asia. So we crawled upstairs (slowly and carefully), and watched the last three Foyle's War episodes in a binge. That's five hours of television, something I haven't done for decades. The very last episode is a real shocker, ending with (literally) a big bang. We're kind of sorry to be done with it. But no matter, at our age we'll probably forget all about it within a few weeks, and can start it over as though it were brand new to us. :)
Today's big project for me is to help my brother Scott with his taxes. I finished mine last week, except for the filing. Doing my taxes never fails to put me in a bad mood, but the trip to Montana immediately following really helped pick me up. In the future, I'm going to have to plan something nice for the few days immediately following tax prep. It will help tamp down the anger I can't help feeling as I watch my hard-earned dollars being stolen by the government so they can waste it on something I don't believe in.
Before my brother gets here, I'm working on the stairs project. I did an hour or so of sanding before I came up to write this post, and I'll probably go do some more in a little while. Sanding is amazingly relaxing, and it's very good arm exercise. :)
Sunday, March 26, 2017
Back to the stairs project!
Back to the stairs project! The stairs I'm building use a couple of “ribs” to hold up the big landing and the smaller stair. These ribs will stand vertically, their bottom on the floor and their top inserted into a 1/2" deep slot routed in the bottoms of the redwood stairs. I just finished fabricating the first one.
I started with a piece of redwood 2x12, cut to the right length on my chop saw. Then I ripped it to the right maximum width on my table saw, and made the cuts that I could on my band saw. The result is in the first photo below. If you embiggen that one, you can see a couple of 1" cuts I made to make a notch – but the last cut (a 2 1/2" horizontal cut) there was no way to get the band saw in there. I could have drilled a hole in there and then used the scroll saw, but that saw is not very good at straight lines (at least it isn't when I'm using it :). So I decided to try chiseling that piece out, something I haven't done very often. That's the middle photo, and it turned out to be much easier than I'd imagined it would be. That notch will be invisible, so it didn't really have to be a nice straight line – but I'm glad it turned out that way anyhow. The last photo shows the finished rib. Now I need to make another one just like it...
I started with a piece of redwood 2x12, cut to the right length on my chop saw. Then I ripped it to the right maximum width on my table saw, and made the cuts that I could on my band saw. The result is in the first photo below. If you embiggen that one, you can see a couple of 1" cuts I made to make a notch – but the last cut (a 2 1/2" horizontal cut) there was no way to get the band saw in there. I could have drilled a hole in there and then used the scroll saw, but that saw is not very good at straight lines (at least it isn't when I'm using it :). So I decided to try chiseling that piece out, something I haven't done very often. That's the middle photo, and it turned out to be much easier than I'd imagined it would be. That notch will be invisible, so it didn't really have to be a nice straight line – but I'm glad it turned out that way anyhow. The last photo shows the finished rib. Now I need to make another one just like it...
Paradise ponders, sea bass and spinach edition...
Paradise ponders, sea bass and spinach edition... My beautiful bride fed us in style yesterday afternoon, with the dish at right. That's fresh sea bass, grilled perfectly, with a lovely sauce over it, on rice and steamed spinach. That was great!
We ended up not doing much yesterday. :) Our main activity was watching a couple of episodes of Foyle's War, one of our all-time favorite TV series, and one of the very few that I actually enjoy watching...
We ended up not doing much yesterday. :) Our main activity was watching a couple of episodes of Foyle's War, one of our all-time favorite TV series, and one of the very few that I actually enjoy watching...
Saturday, March 25, 2017
Paradise ponders, floods and snow stoppers edition...
Paradise ponders, floods and snow stoppers edition... On Thursday morning, before the latest snow melted, I snapped the photo at right. It shows our garage with a bit of snow on its roof, and if you squint hard you can see that there's a (new) piece of metal extending horizontally, about a foot above the gutter. That's a “snow stopper” for standing seam steel roofs, invented by one of the employees (Tyler) of the roofer who installed all my roofing. When he described it to me, I was a bit skeptical of its efficacy – so I had him install one on my garage (my worst snow falling-off-the-roof problem) as an experiment. If it works, I told him, I have several other places that I'd add it to.
Well, based on the first test – admittedly an easy one, as we only got a half inch of snow – it's working exactly as he told me it would. The snow is stopped in its tracks, and only a little bit escapes through the inch or so high open area underneath it. That open area also allows the melted snow trickle through into the gutter. We'll see how it does with a heavy snow, but for the moment I'm much encouraged. I'm going to love it if this really does keep the giant piles of snow from forming right in front of my garage door!
Debbie and I took a drive up Blacksmith Fork Canyon this morning, mainly to see the river. It's just barely above flood stage right now. The muddy river is violently boiling through normally sedate rapids. There are a dozen or so spots where the river is over its banks and onto fields or pastures. There's some visible damage – bank erosion, trees toppled, etc. – but less than I'd expect for the power of the water we see. That foot bridge that I snapped a photo of a week ago is gone with nary a trace – even the abutments, such as they were, have vanished.
Well, based on the first test – admittedly an easy one, as we only got a half inch of snow – it's working exactly as he told me it would. The snow is stopped in its tracks, and only a little bit escapes through the inch or so high open area underneath it. That open area also allows the melted snow trickle through into the gutter. We'll see how it does with a heavy snow, but for the moment I'm much encouraged. I'm going to love it if this really does keep the giant piles of snow from forming right in front of my garage door!
Debbie and I took a drive up Blacksmith Fork Canyon this morning, mainly to see the river. It's just barely above flood stage right now. The muddy river is violently boiling through normally sedate rapids. There are a dozen or so spots where the river is over its banks and onto fields or pastures. There's some visible damage – bank erosion, trees toppled, etc. – but less than I'd expect for the power of the water we see. That foot bridge that I snapped a photo of a week ago is gone with nary a trace – even the abutments, such as they were, have vanished.
Paradise ponders, 1,200 miles of electrons edition...
Paradise ponders, 1,200 miles of electrons edition... Well, we rolled back into our garage late last night, after driving nearly 1,200 miles over the past two days. For some reason I'm a little tired today. :) We left home at 5 am on Tuesday, and pulled into our destination (Lazy K Wrought Iron's Kalispell shop) just under 12 hours later.
This trip was a bit of an experiment for us, to see if we liked traveling a long distance in our Model X. The big question mark was how the charging stops we'd have to make would work out. Bottom line: it was great, and we'll do it again without hesitation. We knew that traveling in such a comfortable, quiet, easy-handling, fun-to-drive car car would be great. We weren't so sure that we'd like the stops every couple hundred miles to charge the car, though. We stopped four times on the way up to Kalispell: in Idaho Falls (Idaho) and in Lima, Butte, and Missoula (Montana). The amount of time we stopped varied from about a half hour to just over an hour, depending on how much charge we needed in order to reach the next Tesla Supercharger.
In the case of those particular Superchargers, there was something nearby to occupy our attention: a restaurant, a coffee shop, or the like. I'm not sure if that's true for all Superchargers, but I wouldn't be surprised to find out that's true. The Supercharger in Lima (at right) is in a tiny little town, but behind me was a restaurant (Jan's Cafe) that truckers seemed to favor. We didn't eat there, but we noted that it got good reviews on both TripAdvisor and Yelp. The other Superchargers were all in fairly large cities, with lots of possible charging-time activities within walking distance.
Each time we stopped for charging, we got out and walked around at the very least. Often we grabbed something to eat or drink, and found a restroom. This “stop every couple hundred miles or so” is not our usual traveling style when we're traveling to get someplace (as opposed to sightseeing). For many years now, we've made high-speed dashes for long distances with very little stopping. So this experience was a bit different for us, and ... we liked it. It made the drive more relaxing and much less tedious.
Before this trip I spent some time with Tesla's Supercharger map and Google Maps, planning our route. The tricky bit was trying to estimate how far our battery would take us, as I know it varies by what speed you're going, how much altitude change there is, what the temperature is, the wind, etc. It's complicated! Then when we started actually making the trip, I discovered completely by accident that the Tesla's navigation system does nearly all of this work for you – though not perfectly. If I put our final destination in, the navigation system figures out all the Superchargers I'll need to stop at, and even tells me how long I have to stay there in order to get my charge up to snuff. Very nice indeed!
But, as I mentioned previously, it's not a perfect system. One thing in particular it seems to disregard is your speed. I'm not sure what assumptions it makes, but it doesn't seem to take into account the high speed limit roads. Several of the Interstates we took have 80 MPH speed limits, and that means the traffic was flowing along at about 85 MPH typically. Aerodynamic drag on a car increases as the square of the speed, so the drag at 85 MPH is about double that at 60 MPH, and the drag probably dominates the power requirements for the motors at high speeds. I suspect the navigation system simply assumes some fixed power consumption per mile, and when the road happens to be a high speed road, that estimate is considerably off.
So that meant we needed more charging than the navigation system estimated, which isn't really a big deal – those superchargers are fast. But they're apparently not all created equal – our charging rate varied by about 2:1 from one Supercharger site to another. I'm not sure why the rates varied, although some things I read this morning make me suspect that there was a partial failure in the lower speed ones we ran into. It seems that the Supercharger equipment has a couple of levels of redundancy, including a modular approach that allows the charger to continue to work (albeit at lower speed) in the event of some kinds of electronics failures. Slower charging is definitely better than no charging!
One thing we noted with a bit of surprise is that all eight of our charging stops (four up, four back), we were the only car charging. We had been a bit worried about being delayed by a backlog of cars waiting to be charged, but that certainly wasn't an issue! Each of the Supercharger sites we visited had eight charging stations, so at least at the moment there appears to be plenty of capacity. I'm guessing that this is very dependent on exactly what route we're traveling, and probably on the time of day as well.
Another little imperfection in the navigation app took me a while to figure out: the navigation system didn't know about the existence of the Lima, Montana Supercharger site. That led to it trying to route us from Butte to Idaho Falls, but at the 85 MPH speeds on that road the battery didn't have enough capacity to make it. If we'd made that trip at 70 MPH, the car said we'd make it – but that would have been inconvenient, to say the least. Fortunately I did know about the Lima Supercharger (from the Supercharger map on Tesla's web site), so I knew we could stop there.
When we stopped at Lazy K's shop, we got to meet Kevin and Abigail, the couple who owns Lazy K and with whom we worked remotely to get our fireplace door and sun room casement window covers built. They were as nice in person as they were with all our calls and emails! We also met their daughter, who helped us load the covers into our car. Then we traveled just a few miles more to Whitefish, Montana and up to the Lodge at Whitefish Lake. Though we were only there for the night, we enjoyed the beautiful view from our room's window (at right) and the nice people who helped us. We ate dinner at the Tupelo Grille, where we had a wonderful mahi mahi entree and a shared appetizer of ahi poke (poke in Montana – what a world!).
Then yesterday on the drive back, we had beautiful scenery all the way, like that at left. Debbie spotted a couple of pronghorn antelope herds, which made her day. Along the way we saw signs advertising a “testicle festival” – you know you're in the western U.S. when you see that!
When we finally rolled into our garage it was about 9 pm. We were dismayed to see that our property was covered in a blanket of snow, but by the middle of the next day it was all gone.
The objective of the trip was to bring home our new casement window covers, and that we did. I've unloaded them from the car and brought them into our sun room. On Monday my brother Scott will be here, and with his help I'll put them in place. They're just as beautiful as the photos we saw. Once they're in place, I'll snap a photo and post it...
This trip was a bit of an experiment for us, to see if we liked traveling a long distance in our Model X. The big question mark was how the charging stops we'd have to make would work out. Bottom line: it was great, and we'll do it again without hesitation. We knew that traveling in such a comfortable, quiet, easy-handling, fun-to-drive car car would be great. We weren't so sure that we'd like the stops every couple hundred miles to charge the car, though. We stopped four times on the way up to Kalispell: in Idaho Falls (Idaho) and in Lima, Butte, and Missoula (Montana). The amount of time we stopped varied from about a half hour to just over an hour, depending on how much charge we needed in order to reach the next Tesla Supercharger.
Each time we stopped for charging, we got out and walked around at the very least. Often we grabbed something to eat or drink, and found a restroom. This “stop every couple hundred miles or so” is not our usual traveling style when we're traveling to get someplace (as opposed to sightseeing). For many years now, we've made high-speed dashes for long distances with very little stopping. So this experience was a bit different for us, and ... we liked it. It made the drive more relaxing and much less tedious.
Before this trip I spent some time with Tesla's Supercharger map and Google Maps, planning our route. The tricky bit was trying to estimate how far our battery would take us, as I know it varies by what speed you're going, how much altitude change there is, what the temperature is, the wind, etc. It's complicated! Then when we started actually making the trip, I discovered completely by accident that the Tesla's navigation system does nearly all of this work for you – though not perfectly. If I put our final destination in, the navigation system figures out all the Superchargers I'll need to stop at, and even tells me how long I have to stay there in order to get my charge up to snuff. Very nice indeed!
But, as I mentioned previously, it's not a perfect system. One thing in particular it seems to disregard is your speed. I'm not sure what assumptions it makes, but it doesn't seem to take into account the high speed limit roads. Several of the Interstates we took have 80 MPH speed limits, and that means the traffic was flowing along at about 85 MPH typically. Aerodynamic drag on a car increases as the square of the speed, so the drag at 85 MPH is about double that at 60 MPH, and the drag probably dominates the power requirements for the motors at high speeds. I suspect the navigation system simply assumes some fixed power consumption per mile, and when the road happens to be a high speed road, that estimate is considerably off.
So that meant we needed more charging than the navigation system estimated, which isn't really a big deal – those superchargers are fast. But they're apparently not all created equal – our charging rate varied by about 2:1 from one Supercharger site to another. I'm not sure why the rates varied, although some things I read this morning make me suspect that there was a partial failure in the lower speed ones we ran into. It seems that the Supercharger equipment has a couple of levels of redundancy, including a modular approach that allows the charger to continue to work (albeit at lower speed) in the event of some kinds of electronics failures. Slower charging is definitely better than no charging!
One thing we noted with a bit of surprise is that all eight of our charging stops (four up, four back), we were the only car charging. We had been a bit worried about being delayed by a backlog of cars waiting to be charged, but that certainly wasn't an issue! Each of the Supercharger sites we visited had eight charging stations, so at least at the moment there appears to be plenty of capacity. I'm guessing that this is very dependent on exactly what route we're traveling, and probably on the time of day as well.
Another little imperfection in the navigation app took me a while to figure out: the navigation system didn't know about the existence of the Lima, Montana Supercharger site. That led to it trying to route us from Butte to Idaho Falls, but at the 85 MPH speeds on that road the battery didn't have enough capacity to make it. If we'd made that trip at 70 MPH, the car said we'd make it – but that would have been inconvenient, to say the least. Fortunately I did know about the Lima Supercharger (from the Supercharger map on Tesla's web site), so I knew we could stop there.
When we finally rolled into our garage it was about 9 pm. We were dismayed to see that our property was covered in a blanket of snow, but by the middle of the next day it was all gone.
The objective of the trip was to bring home our new casement window covers, and that we did. I've unloaded them from the car and brought them into our sun room. On Monday my brother Scott will be here, and with his help I'll put them in place. They're just as beautiful as the photos we saw. Once they're in place, I'll snap a photo and post it...
Tuesday, March 21, 2017
Paradise ponders, eyeball pressures and drained batteries edition...
Paradise ponders, eyeball pressures and drained batteries edition... But first: I stand accused of being an idiot, something I suspect is entirely possible. The proximate cause of the accusation is that I failed to post a photo of the towel hanger in situ after I repaired it. So ... there it is, at right. Satisfied, accusers?
Some evil virus has invaded my body, and I've been feeling low the past few days. Today, so far, is the worst of all. Fever, sniffles, sneezes, and coughing – all the classic symptoms. Sure don't like being sick...
I had my eyeballs examined today. I've been going to see the optometrist roughly annually my entire adult life, even when I don't need a new prescription. Mainly that's because glaucoma runs in my family, and if I'm going to get glaucoma, I want to know as early as possible. My pressures today were 13 mm Hg, which is at the low end of normal. Glaucoma is usually diagnosed by abnormally high pressures, so that was a relief. Better yet, this past year my optometrist purchased an instrument that maps the thickness of the eye's retina. Thinning indicates damage from a number of causes, including the two main ones that I'm worried about: glaucoma and macular degeneration. I have no observable retinal thinning. Yay!
But this time my visit was also prompted by problems I've been having with my vision, especially at close distances. This is less worrisome (it happens to nearly everybody older than about 60) than it is simply a necessity for a new prescription. When the optometrist did the refraction (to measure how my eyeballs were working), sure enough my prescription had significantly changed. New glasses are now on order, and I've been advised to get very friendly with magnifying devices for closeup work. Sigh. Sometimes getting old isn't so much fun. Beats the hell out of the alternative, though!
This afternoon I worked for a while taking down a barbed wire fence. The fence actually belongs to Tim D., my friend and neighbor to the north. He normally puts it up every fall and takes it down every spring, so that his horses can pasture in his alfalfa field after the last cutting. Tim just had back surgery two weeks ago, though, and even the modest effort of taking down a fence line is more than he's allowed to attempt. I needed that fence down so that a contractor working for me could get a skid-steer machine with a trencher through to Tim's field. The east/west row of risers that currently goes through the middle of my back yard is coming out, and we're putting a new row of risers next to Tim's field. He's the only one that needs them any more, so we're also going to adjust the riser spacing to be correct for his odd-shaped field. He and I spent an hour or so just talking this afternoon. I get a lot of pleasure from those conversations, and simply being able to help him a little – he was so much help for me when I was getting the barn built...
Debbie and I are making a two day trip starting early tomorrow morning. I'm not taking my laptop, so there will be no blogging on those days. We're headed up to Kalispell, Montana to pick up some iron work that the folks at Lazy K Wrought Iron did for us. We'll be staying at the lodge on Whitefish Lake (just north of Kalispell) tomorrow morning.
One little added frisson to this trip will be that we're making it in the Tesla Model X. This is far enough from home that we'll have to charge the car several times in each direction. The Tesla superchargers are in all the right places, so I don't expect this to present any challenges. Nevertheless, it feels like we're living a little dangerously having our electric car several hundred miles from home! I'll let you know how this goes...
Some evil virus has invaded my body, and I've been feeling low the past few days. Today, so far, is the worst of all. Fever, sniffles, sneezes, and coughing – all the classic symptoms. Sure don't like being sick...
I had my eyeballs examined today. I've been going to see the optometrist roughly annually my entire adult life, even when I don't need a new prescription. Mainly that's because glaucoma runs in my family, and if I'm going to get glaucoma, I want to know as early as possible. My pressures today were 13 mm Hg, which is at the low end of normal. Glaucoma is usually diagnosed by abnormally high pressures, so that was a relief. Better yet, this past year my optometrist purchased an instrument that maps the thickness of the eye's retina. Thinning indicates damage from a number of causes, including the two main ones that I'm worried about: glaucoma and macular degeneration. I have no observable retinal thinning. Yay!
But this time my visit was also prompted by problems I've been having with my vision, especially at close distances. This is less worrisome (it happens to nearly everybody older than about 60) than it is simply a necessity for a new prescription. When the optometrist did the refraction (to measure how my eyeballs were working), sure enough my prescription had significantly changed. New glasses are now on order, and I've been advised to get very friendly with magnifying devices for closeup work. Sigh. Sometimes getting old isn't so much fun. Beats the hell out of the alternative, though!
This afternoon I worked for a while taking down a barbed wire fence. The fence actually belongs to Tim D., my friend and neighbor to the north. He normally puts it up every fall and takes it down every spring, so that his horses can pasture in his alfalfa field after the last cutting. Tim just had back surgery two weeks ago, though, and even the modest effort of taking down a fence line is more than he's allowed to attempt. I needed that fence down so that a contractor working for me could get a skid-steer machine with a trencher through to Tim's field. The east/west row of risers that currently goes through the middle of my back yard is coming out, and we're putting a new row of risers next to Tim's field. He's the only one that needs them any more, so we're also going to adjust the riser spacing to be correct for his odd-shaped field. He and I spent an hour or so just talking this afternoon. I get a lot of pleasure from those conversations, and simply being able to help him a little – he was so much help for me when I was getting the barn built...
Debbie and I are making a two day trip starting early tomorrow morning. I'm not taking my laptop, so there will be no blogging on those days. We're headed up to Kalispell, Montana to pick up some iron work that the folks at Lazy K Wrought Iron did for us. We'll be staying at the lodge on Whitefish Lake (just north of Kalispell) tomorrow morning.
One little added frisson to this trip will be that we're making it in the Tesla Model X. This is far enough from home that we'll have to charge the car several times in each direction. The Tesla superchargers are in all the right places, so I don't expect this to present any challenges. Nevertheless, it feels like we're living a little dangerously having our electric car several hundred miles from home! I'll let you know how this goes...
Subscribe to:
Posts (Atom)