Things every hacker once knew... This is a fascinating essay by Eric S. Raymond. Almost everything in it is well known to me, though I don't think Eric would consider me a “hacker”. I'm five years older than he is, and I suspect I started with electronics (though not computers) a bit younger than he did – so some of the things he lists don't even seem that antique to me! :)
Update: first link fixed. Thanks to all who commented or emailed to let me know!
Friday, February 3, 2017
Model X update...
Model X update... We've had our Tesla Model X now for just over a month. How do we like the car after having had it for a while?
Very much, thank you!
We continue to be thrilled by the visibility and quiet, perfect for the kind of sightseeing and wildlife viewing that we love so much. The comfort of all the little things like heated seats and automatic doors is very nice, though it still feels a bit weird for we who have been driving pickup trucks for 30 years! :)
I've had just one problem with the car other than those I've previously described in posts: the rear-view mirror inside the car is permanently darkened. All three rear-view mirrors are supposed to automatically darken when there are bright headlights behind the car, and the two exterior mirrors work fine. The software upgrade is performing well, though I'm still a little disappointed by the restrictions on it. We haven't been able to try auto-steer yet, because the limitations currently in force mean that there are no roads anywhere near us where we can use it. The current restrictions are (a) you must be on a limited-access highway (i.e., an Interstate or something like that), and you have to be going under 45 MPH (i.e., high traffic situation). Well, in this neck of the woods we have neither Interstate nor heavy traffic, so we're SOL until the restrictions get lifted. This is promised once sufficient experience has been gained by the entire fleet of Tesla cars. Won't be much from northern Utah!
We're going in for our service appointment (to look at the non-retracting spoiler and the rear-view mirror) next Tuesday afternoon. Later that same day we're meeting friends for dinner at the Red Iguana. Should be an interesting day!
Oh, one other Model X related thing: we've purchased a couple of accessories. The first one, which we're already using, is a pair of color-coded silicone covers for the Tesla fob (which replaces a key). The covers add some cushioning and waterproofing, but the color-coding was what we really wanted: red for my fob, black for Debbie's. The fob is how the Model X figures out who you are, and determines the settings for the seats, mirrors, etc. that it restores to the driver's seat. We've also purchased a couple of tempered glass screen protectors, one for the giant screen in the center console, the other for the smaller screen in front of the steering wheel. I'll be installing those this weekend.
Very much, thank you!
We continue to be thrilled by the visibility and quiet, perfect for the kind of sightseeing and wildlife viewing that we love so much. The comfort of all the little things like heated seats and automatic doors is very nice, though it still feels a bit weird for we who have been driving pickup trucks for 30 years! :)
I've had just one problem with the car other than those I've previously described in posts: the rear-view mirror inside the car is permanently darkened. All three rear-view mirrors are supposed to automatically darken when there are bright headlights behind the car, and the two exterior mirrors work fine. The software upgrade is performing well, though I'm still a little disappointed by the restrictions on it. We haven't been able to try auto-steer yet, because the limitations currently in force mean that there are no roads anywhere near us where we can use it. The current restrictions are (a) you must be on a limited-access highway (i.e., an Interstate or something like that), and you have to be going under 45 MPH (i.e., high traffic situation). Well, in this neck of the woods we have neither Interstate nor heavy traffic, so we're SOL until the restrictions get lifted. This is promised once sufficient experience has been gained by the entire fleet of Tesla cars. Won't be much from northern Utah!
We're going in for our service appointment (to look at the non-retracting spoiler and the rear-view mirror) next Tuesday afternoon. Later that same day we're meeting friends for dinner at the Red Iguana. Should be an interesting day!
Oh, one other Model X related thing: we've purchased a couple of accessories. The first one, which we're already using, is a pair of color-coded silicone covers for the Tesla fob (which replaces a key). The covers add some cushioning and waterproofing, but the color-coding was what we really wanted: red for my fob, black for Debbie's. The fob is how the Model X figures out who you are, and determines the settings for the seats, mirrors, etc. that it restores to the driver's seat. We've also purchased a couple of tempered glass screen protectors, one for the giant screen in the center console, the other for the smaller screen in front of the steering wheel. I'll be installing those this weekend.
Random morning thought...
Random morning thought... While I was reading the news this morning about the 63,411 things that Trump did last night, a memory surfaced: some advice I got many years ago from an executive trying to teach me how to manage an engineering group. He told me the most important thing I could do was simply to do. When I looked baffled, he said “Do something, even if it’s wrong!” That led to a more interesting discussion about the importance, in leadership, of making decisions and setting a course of action. Even more interesting was his assertion that a core skill of managers is the ability to make decisions in the presence of imperfect or even absent information.
I felt the truth of that advice on many occasions in my decades of management experience. I was surprised by just how often subordinates would be unable (or unwilling, to the same effect) to make a decision and instead raised it to me. I hope it's true that I didn't do the same to my bosses!
What dawned on me this morning is we're seeing that principle in action at the level of the President of the U.S. The sheer speed with which Trump is taking actions means that we're seeing low information decision-making. Well, I guess there's one other possibility: that all these actions were queued up in some master plan. I'll dismiss that, however, on the basis that if any such plan actually existed certainly it's presence would have leaked, and most likely much of its contents. So I think it's more likely that it's “Do something, even if it’s wrong!” that's going on.
So here's the big question: is that a good thing, or a bad thing?
I really don't know. I do know, however, that it's frightening.
I'm handling it this morning by listening to Frank Zappa's Apostrophe, which ever gives me joy...
I felt the truth of that advice on many occasions in my decades of management experience. I was surprised by just how often subordinates would be unable (or unwilling, to the same effect) to make a decision and instead raised it to me. I hope it's true that I didn't do the same to my bosses!
What dawned on me this morning is we're seeing that principle in action at the level of the President of the U.S. The sheer speed with which Trump is taking actions means that we're seeing low information decision-making. Well, I guess there's one other possibility: that all these actions were queued up in some master plan. I'll dismiss that, however, on the basis that if any such plan actually existed certainly it's presence would have leaked, and most likely much of its contents. So I think it's more likely that it's “Do something, even if it’s wrong!” that's going on.
So here's the big question: is that a good thing, or a bad thing?
I really don't know. I do know, however, that it's frightening.
I'm handling it this morning by listening to Frank Zappa's Apostrophe, which ever gives me joy...
Thursday, February 2, 2017
Milo's response...
Trump has already floated the notion of stopping all federal funding of Berkeley in response. The challenge, as always, would be finding the right criteria – and the right judges – to use in determining which institutions of higher education should be defunded.
I have a proposal for a way to avoid that tough problem: defund them all (to be clear: I'm talking about federal funding). And yes, I'm serious. If any particular institution is truly doing a vital job (and I'm very skeptical of that with respect to Berkeley!), then there will be market-based funding available. If not ... well, then, that institution must not have been all that important to anyone other than its faculty, administrators, and students, then. So why the hell should taxpayers be funding it?
Paradise ponders, shifty grout and hoarfrost edition...
A few days ago I wrote about my grout project. It's finished now, and we can use our shower again. But there's something mighty peculiar about the caulking we're using: it changes color, and quite dramatically. When it's dry, it's roughly the color of milk chocolate – a rich, dark brown that doesn't match our other grout at all. When it's been wet for 30 seconds or so, though, something quite dramatic happens: over the course of about 10 seconds it changes to a very pale beige, almost precisely matching our old grout! So ... while we're taking a shower, the new grout looks great. After the shower dries out, it looks like someone spilled dark paint onto the patched areas of our grout. Sigh...
Michelle H. is one of the friends we've made here. She's also the lady who comes over to clean our house, and she's done many other things to help us when we're on trips or (especially!) while Debbie was injured. She lives in Paradise, and is an altogether typical resident here: a devout Mormon, mother of eight children, friendly, full of smiles and good cheer, and (very) active in the community. A few days ago we took her out for lunch at Los Primos (which she loves!), and on the way back home we were admiring the hoarfrost on the trees. We'd had a freezing fog in the morning, and even the weeds were beautiful. Michelle called it something else (“frosty fog” or something like that), and I told her that it was actually called hoarfrost. I wish I had a photo of her face when I said that. It was obvious from her reaction that she thought I said “whore-frost”, and most Americans would pronounce the two as though they were precise homonyms (there's actually a subtle difference). It took a little while for us to convince her that we weren't having some fun at her expense! :)
A few days later, she was in our house while I was unpacking a tool I'd received in the mail. She asked me what it was, and I replied (with the truth): it's a nut-cracker. Once again, that face! :) The tool I bought looks exactly like those at right. Michelle only recovered her equanimity after I explained what the tool was actually for – splitting nuts that had become corroded onto a bolt. Oh, poor sheltered Michelle, exposed to a couple of outsiders like us!
Our forecast has five days of snow in the next seven days, but none of the probabilities are high, nor are the forecast amounts large. Better yet: for four days starting tomorrow, we're supposed to have temperatures well above freezing for most of the day – and on two of those days, we have rain in the forecast. Oh, that would be lovely to have enough rain to melt down a substantial part of the snow mountains we have all over our place!
Yesterday while we were out gallivanting amongst the wildlife, someone came by our driveway and moved two of the largest snow piles I'd made so that we had better visibility when trying to leave our driveway. We spotted that as we pulled back into our driveway. Even around here, surrounded by the nicest people on the planet, that's still a very nice thing for someone to do. I couldn't tell who did it; all I could figure out (from the tracks) is that whoever did it had a very large piece of equipment indeed – those tire tracks were about 30" wide! A little later in the day I was taking our trash can out to the highway, and I saw the person who was doing the nice driveway-fixing – he was working on my neighbor's driveway across the highway. I went over to find out who it was and to thank him, and discovered that it was a county employee! He was actually assigned to do this work, as a way of reducing accidents by enabling people to see as they pull out of their driveway. He was working his way along the entire length of State Highway 165, clearing everybody's driveway. What an eminently sensible thing to do! I've lived in California so long that I basically never expect the local governments to do anything sensible, so seeing it happen here is still always surprising...
Wednesday, February 1, 2017
Paradise ponders, super wildlife viewing edition...
Paradise ponders, super wildlife viewing edition... Debbie and I took a drive up Blacksmith Fork Canyon, leaving shortly after sunrise. The photos below are all from this morning's trip. In addition to the beautiful sunrise and winter scenery, we saw dozens of deer, a group of nine elk, three bald eagles, five moose, and an American dipper. Many of the large mammals were quite close to the road, close enough that I could get photos even without a telephoto lens. The dipper was a hoot to watch, and we had a good long view of him. He was hunting bugs in the stream, submerging often, and once we actually saw him catch some sort of beetle and gobble it down. The bald eagles were roosting in trees, one of them just 60' or so from us. The entire trip up to Hardware Ranch we didn't see a single car – we had the entire canyon to ourselves. The elk herd at Hardware Ranch hadn't yet been fed, and they were all watching closely in the direction the feed carts come from. A wonderful start to the day!
Tuesday, January 31, 2017
Paradise ponders, massive burrito edition...
Paradise ponders, massive burrito edition... The photo at right shows what you get if you order a carne asada burrito mojado from Los Primos. I'm pretty sure I gained two or three pounds just by looking at that thing! Somehow I managed to eat the whole thing. I was hungry, so that helped – but still, that was a ridiculously huge (and delicious!) burrito...
The shower grout project occupied much of my day yesterday. I will finish it all up today; only cleanup of excess caulk remains. Then I have a couple other projects in the house to attempt. One of them involves cracking a couple of nuts that are (a) thoroughly and completely “welded” to their bolts by corrosion, and (b) in an incredibly awkward place with the opportunity to break an expensive fragile object. Should be great fun!
The shower grout project occupied much of my day yesterday. I will finish it all up today; only cleanup of excess caulk remains. Then I have a couple other projects in the house to attempt. One of them involves cracking a couple of nuts that are (a) thoroughly and completely “welded” to their bolts by corrosion, and (b) in an incredibly awkward place with the opportunity to break an expensive fragile object. Should be great fun!
Sunday, January 29, 2017
Paradise ponders, “I am grout!” edition...
Paradise ponders, “I am grout!” edition... That title is a nod to Guardians of the Galaxy, which many who know me might be quite surprised to find that (a) I've actually watched it, and (b) that Debbie and I thoroughly enjoyed it and the rest of the Marvel series it's a part of.
We just finished watching (on Blu-Ray) another series that I have a very different reaction to: The Hobbit, in three parts. This is the preface, basically, to the Lord of the Rings. That's also a three part sequence of movies, just as there were three books. The Hobbit, in book form, is a single slim volume – far shorter than any of the three volumes of Lord of the Rings. When making the Lord of the Rings movie, much material from the books had to be eliminated. When making The Hobbit movie, apparently Peter Jackson felt the need to add a lot of material – including large quantities of stuff that Tolkien never had in any of his books. The result, for me, was that I was almost constantly experiencing mental disjoints as I watched the movie. Parts of the story were changed almost beyond recognition, without any reason that I could see. The added parts were often distractions from the relatively simple and direct story line in Tolkien's original. At times, especially in the last film, it seemed like the movie was mainly a vehicle for the (admittedly spectacular) computer-generated special effects – and I wanted The Hobbit, dammit, not someone showing off their render farm. Call me a Tolkien snob if you will, but I was profoundly disappointed with The Hobbit as a movie. I have some complaints about the Lord of the Rings movies, too, but they pale into insignificance compared with those I have about The Hobbit.
Oh, well.
So, “I am grout!” Today my big project was fixing the grout in our shower. This has been a thorn in our side for three years now, ever since we remodeled our master bathroom. The tile was originally grouted with a modern grout that is based on silicone, rather than old-fashioned mortar. Our contractor insisted on using it, telling us that it was far more durable in an application like a shower, where it would frequently get wet. That sounded great to me, until (after a few months) pieces of the grout on the floor (and only the floor) turned soft and came out. We had holey grout until we got the contractor back in to redo it. A few months later, we had holes again. The poor contractor (whom we really liked) came back again, refused to charge us, and redid the entire floor. A few months later (you guessed it), holes again. At that point I basically gave up, and figured that when we got enough holes to really upset us we'd re-grout the whole thing with old-fashioned mortar-based grout. I'm pretty sure that wouldn't turn soft!
Well, when we had the sun room and mud room tiled last month, I asked the craftsman about the shower. He recommended a silicone-based sanded caulk (not actually grout at all), used only after thoroughly drying the floor with a hair dryer. I ordered that caulk (found it on Amazon, in the same color as our grout), and it arrived a couple days ago.
So today I spent a few hours with a linoleum knife, poking and prodding all over the shower floor to find all the soft spots in the grout, and cutting it out. I can see no pattern that would explain why certain areas of grout turned soft – it looks totally random to me. About 5% of the floor's grout turned soft; the rest was in perfect shape. Weird. Anyway, with a hair dryer, linoleum knife, and vacuum, I got all the soft grout I could find removed. Then I applied the caulk, which took only 30 minutes or so. I have to let it cure for 3 days before using the shower. The color match isn't perfect, but it's good enough.
Hopefully this was good advice, and the caulk will work where the grout didn't. If not, my next step will be to find a contractor to remove the new-fangled grout and put the old-fashioned stuff in instead...
We just finished watching (on Blu-Ray) another series that I have a very different reaction to: The Hobbit, in three parts. This is the preface, basically, to the Lord of the Rings. That's also a three part sequence of movies, just as there were three books. The Hobbit, in book form, is a single slim volume – far shorter than any of the three volumes of Lord of the Rings. When making the Lord of the Rings movie, much material from the books had to be eliminated. When making The Hobbit movie, apparently Peter Jackson felt the need to add a lot of material – including large quantities of stuff that Tolkien never had in any of his books. The result, for me, was that I was almost constantly experiencing mental disjoints as I watched the movie. Parts of the story were changed almost beyond recognition, without any reason that I could see. The added parts were often distractions from the relatively simple and direct story line in Tolkien's original. At times, especially in the last film, it seemed like the movie was mainly a vehicle for the (admittedly spectacular) computer-generated special effects – and I wanted The Hobbit, dammit, not someone showing off their render farm. Call me a Tolkien snob if you will, but I was profoundly disappointed with The Hobbit as a movie. I have some complaints about the Lord of the Rings movies, too, but they pale into insignificance compared with those I have about The Hobbit.
Oh, well.
So, “I am grout!” Today my big project was fixing the grout in our shower. This has been a thorn in our side for three years now, ever since we remodeled our master bathroom. The tile was originally grouted with a modern grout that is based on silicone, rather than old-fashioned mortar. Our contractor insisted on using it, telling us that it was far more durable in an application like a shower, where it would frequently get wet. That sounded great to me, until (after a few months) pieces of the grout on the floor (and only the floor) turned soft and came out. We had holey grout until we got the contractor back in to redo it. A few months later, we had holes again. The poor contractor (whom we really liked) came back again, refused to charge us, and redid the entire floor. A few months later (you guessed it), holes again. At that point I basically gave up, and figured that when we got enough holes to really upset us we'd re-grout the whole thing with old-fashioned mortar-based grout. I'm pretty sure that wouldn't turn soft!
Well, when we had the sun room and mud room tiled last month, I asked the craftsman about the shower. He recommended a silicone-based sanded caulk (not actually grout at all), used only after thoroughly drying the floor with a hair dryer. I ordered that caulk (found it on Amazon, in the same color as our grout), and it arrived a couple days ago.
So today I spent a few hours with a linoleum knife, poking and prodding all over the shower floor to find all the soft spots in the grout, and cutting it out. I can see no pattern that would explain why certain areas of grout turned soft – it looks totally random to me. About 5% of the floor's grout turned soft; the rest was in perfect shape. Weird. Anyway, with a hair dryer, linoleum knife, and vacuum, I got all the soft grout I could find removed. Then I applied the caulk, which took only 30 minutes or so. I have to let it cure for 3 days before using the shower. The color match isn't perfect, but it's good enough.
Hopefully this was good advice, and the caulk will work where the grout didn't. If not, my next step will be to find a contractor to remove the new-fangled grout and put the old-fashioned stuff in instead...
National Security Council changes...
National Security Council changes... Here's a good example where Trump has done something that worries me. He's changed the membership of the National Security Council in three ways:
Because we have so many LDS people here, our grocery stores prominently feature displays of food that can be stored for long periods of time. I'm paying more attention to those displays these days. I might even start buying some...
- The Chairman of the Joint Chiefs of Staff has lost his seat. That means that our military no longer has direct visibility into the information and decision-making of the National Security Council. They still have indirect representation through the civilian, politically-appointed Secretary of Defense. In general I'm in favor of reducing meeting attendees, especially by pruning those of little or marginal import. This position does not seem like one of those to me.
- The Director of National Intelligence has lost his seat. Never mind that I can't read that title without laughing out loud. This is similar to the previous bullet: the intelligence agencies no longer has direct visibility into the National Security Council, but the civilian, politically-appointed Director of National Security Advisor does.
- The Trump-created post of Chief Strategist, occupied by Steve Bannon, has gained a seat on the National Security Council. Bannon scares me. I have the impression of a low-information thug who is all too delighted by the exercise of power – as well as being such a Trumpkin that I can't help but think of historical fascists and their sycophantic enablers. Any move by Trump that gives Bannon more access and power is going to scare me.
- the sum is approximately zero
- fear of looming negative numbers (bad) is high
- anticipation of looming positive numbers is low
Because we have so many LDS people here, our grocery stores prominently feature displays of food that can be stored for long periods of time. I'm paying more attention to those displays these days. I might even start buying some...
Saturday, January 28, 2017
Paradise ponders, snowy drives edition...
Paradise ponders, snowy drives edition... A day without snow plowing! It's a miracle! Today dawned cold (5°F), clear, and snow-free. Woo hoo!
Debbie and I took a drive up Blacksmith Fork Canyon, and then later down to Porcupine Reservoir. We saw quite a few deer, a few elk, and two mooses. All looked fat and healthy given that it's late January. We also saw something unusual: a flock of about a dozen turkeys perched about 20' high in a box elder tree. It was weird to see those big black things sitting way up there! Along highway 165 we saw a bald eagle flying; we also saw one yesterday in the same general area. It must be wintering over here – probably comes from somewhere really cold, like the northern Yukon.
The highlight of the day for me, though, was spotting an American dipper in the stream in Blacksmith Fork Canyon. It was in the stream, much like the one in the photo (not mine) at right, dipping and bobbing in their characteristic way, looking for bugs to eat. That implies that there actually are bugs in the stream, which given that the temperature there was 0°F is pretty amazing!
That got me to wondering why streams don't freeze solid in weather like this. That canyon has been below freezing continuously for about a month and a half. How is it that the water is still liquid, when the air and the ground surrounding it are well below freezing temperature? I did some googling on the subject and discovered no explanations that I'd call authoritative. This makes me wonder whether anyone has studied the question. I did run across two perhaps plausible explanations (examples here and here), oft repeated. The first says a stream will only freeze if heat is removed from the water faster than it's added by the water replacing it in any given spot along the stream. That made me think of this: suppose you could follow one cubic centimeter of water as it flows down the stream. If the air is colder than the water, would it not continuously lose heat and then eventually freeze? The second reason I can't poke any holes in, but I also can't prove it to my own satisfaction. Basically that says that as water falls (as the stream loses altitude), kinetic energy is continuously being converted to thermal energy (through turbulence, etc.). So long as this thermal energy is added faster than it's being removed by the cold air, the water won't freeze.
We have a beautiful, large icicle on our garage right now. It's actually threatening the structural integrity of our gutter:
Debbie and I took a drive up Blacksmith Fork Canyon, and then later down to Porcupine Reservoir. We saw quite a few deer, a few elk, and two mooses. All looked fat and healthy given that it's late January. We also saw something unusual: a flock of about a dozen turkeys perched about 20' high in a box elder tree. It was weird to see those big black things sitting way up there! Along highway 165 we saw a bald eagle flying; we also saw one yesterday in the same general area. It must be wintering over here – probably comes from somewhere really cold, like the northern Yukon.
The highlight of the day for me, though, was spotting an American dipper in the stream in Blacksmith Fork Canyon. It was in the stream, much like the one in the photo (not mine) at right, dipping and bobbing in their characteristic way, looking for bugs to eat. That implies that there actually are bugs in the stream, which given that the temperature there was 0°F is pretty amazing!
That got me to wondering why streams don't freeze solid in weather like this. That canyon has been below freezing continuously for about a month and a half. How is it that the water is still liquid, when the air and the ground surrounding it are well below freezing temperature? I did some googling on the subject and discovered no explanations that I'd call authoritative. This makes me wonder whether anyone has studied the question. I did run across two perhaps plausible explanations (examples here and here), oft repeated. The first says a stream will only freeze if heat is removed from the water faster than it's added by the water replacing it in any given spot along the stream. That made me think of this: suppose you could follow one cubic centimeter of water as it flows down the stream. If the air is colder than the water, would it not continuously lose heat and then eventually freeze? The second reason I can't poke any holes in, but I also can't prove it to my own satisfaction. Basically that says that as water falls (as the stream loses altitude), kinetic energy is continuously being converted to thermal energy (through turbulence, etc.). So long as this thermal energy is added faster than it's being removed by the cold air, the water won't freeze.
We have a beautiful, large icicle on our garage right now. It's actually threatening the structural integrity of our gutter:
Friday, January 27, 2017
“We will not accept what might have been...”
Paradise ponders, magical XPK01Z edition...
Paradise ponders, magical XPK01Z edition... Our weather forecast for last night had a 0% chance of precipitation. Guess what it's doing right now? Snowing! So far there isn't enough accumulated to compel me to plow and shovel again, but I've no idea when this might end. Or if it might end! I may well be on snow removal duty again today!
Over the past few weeks, the door from our kitchen to our new deck has been getting increasingly tight. The problem's cause is easy enough to determine: the door has been wet from snow melt, and at the moment is frozen solid, so the wood has swelled a bit. From inspection I could see that the top of the door needed to have something like 1/64th or 1/32nd of an inch removed. I first tried sanding, but after a half hour it didn't feel like I was making any useful progress. The right tool for that job is a plane, and though I have a fairly well-equipped woodworking shop, a plane is not something I ever invested in. Why? Mainly because I have a planer, a big piece of equipment that makes short work of flattening boards. But you can't put an entire door through a planer. This job calls for a hand-held plane.
So I went looking on Amazon to see what was available these days. I haven't purchased a plane in decades, so I didn't know what to expect. In my head was an old-fashioned hand plane, like the one in the photo at right. When I did my usual sort of the available planes (and there were many!), a different tool altogether popped out on top: battery-powered power planes. I have a collection of Makita battery-powered tools, so I immediately gravitated to their version: the model KPK01Z.
That's a photo of it at left (click it to go to the Amazon listing). I'd never even heard of a power plane before, so I did some reading up on them. The more I read, the more I liked – this looked like absolutely the right tool for the job. So I ordered it, and it arrived late yesterday afternoon.
This morning I read the manual (something I usually do for a tool I'm unfamiliar with). It's easy to use this thing; the only slightly tricky bit was how the safety power switch interlock worked. I opened the tight door, took the plane outside, and less than 60 seconds later the door was fixed. Total calories expended: about 0.1. I may build a shrine to this tool! :)
I also installed my replacement Nest thermostat, the one they reluctantly sent me after I proved the battery in my old one was dead, and I got snippy with them about their initial offer of a 20% discount on a new thermostat. The replacement went in with no trouble at all, and is working just fine. Now I have to send the old, dead one back, but that's no problem at all...
Over the past few weeks, the door from our kitchen to our new deck has been getting increasingly tight. The problem's cause is easy enough to determine: the door has been wet from snow melt, and at the moment is frozen solid, so the wood has swelled a bit. From inspection I could see that the top of the door needed to have something like 1/64th or 1/32nd of an inch removed. I first tried sanding, but after a half hour it didn't feel like I was making any useful progress. The right tool for that job is a plane, and though I have a fairly well-equipped woodworking shop, a plane is not something I ever invested in. Why? Mainly because I have a planer, a big piece of equipment that makes short work of flattening boards. But you can't put an entire door through a planer. This job calls for a hand-held plane.
So I went looking on Amazon to see what was available these days. I haven't purchased a plane in decades, so I didn't know what to expect. In my head was an old-fashioned hand plane, like the one in the photo at right. When I did my usual sort of the available planes (and there were many!), a different tool altogether popped out on top: battery-powered power planes. I have a collection of Makita battery-powered tools, so I immediately gravitated to their version: the model KPK01Z.
That's a photo of it at left (click it to go to the Amazon listing). I'd never even heard of a power plane before, so I did some reading up on them. The more I read, the more I liked – this looked like absolutely the right tool for the job. So I ordered it, and it arrived late yesterday afternoon.
This morning I read the manual (something I usually do for a tool I'm unfamiliar with). It's easy to use this thing; the only slightly tricky bit was how the safety power switch interlock worked. I opened the tight door, took the plane outside, and less than 60 seconds later the door was fixed. Total calories expended: about 0.1. I may build a shrine to this tool! :)
I also installed my replacement Nest thermostat, the one they reluctantly sent me after I proved the battery in my old one was dead, and I got snippy with them about their initial offer of a 20% discount on a new thermostat. The replacement went in with no trouble at all, and is working just fine. Now I have to send the old, dead one back, but that's no problem at all...
Well, that was much better!
Well, that was much better! At the suggestion of reader Richard C., I bought myself some “breakout boards” to make it easier to work with the tiny little surface-mount integrated circuits so common today. Many parts can still be purchased in (the much easier to prototype with) DIP packages, but some, like this one, cannot. Most of the breakout boards I found were obnoxiously expensive, between $5 and $30. When I'm using such a thing to mount a fifty cent part, I rebel. But eventually I found this very handy breakout board package at Digi-Key. It's from Texas Instruments, and it has six each of six different breakout boards – 36 in all – for $10.08. That's just 28 cents each!
Yesterday my breakout boards arrived, and I put them to the test. First I soldered the (tiny!) chip's six pins to the breakout board. Once I got the first pin soldered the chip was held in place; then the rest of the pins were easy. I'm going to try gluing the chip down next time, before soldering. Then I soldered some double-male header pins in place, making this look like a six-pin DIP, form-factor-wise. The perf board you see in the last two photos is only there to hold the header strips in place while I soldered them. The end result? A surface-mount chip now can be treated just like a DIP. I can either solder the header pins directly (which is easy with their 0.1" spacing), or I can plug the whole assembly straight into a DIP socket. Either way, that's way easier than wiring straight to that teensy little chip!
Several things other than the breakout board contributed to making this possible, and even not too difficult. The circuit board vise (entirely visible in the last photo) is inexpensive and indispensable. I have an excellent soldering iron (Hakko FX-888D) with a very pointy tip (just 0.05" diameter at the end). Finally, I have a pair of Carson CP-60 head-mounted magnifiers. These act like a low-power stereo microscope that I can use with my glasses on (so my astigmatism, which is quite awful, is corrected) – and they're automatically pointed wherever I'm looking. If you're wondering how I managed to take these photos with my iPhone, that's simple: I took them through a magnifying glass (except for the last one; that's straight up iPhone). That's why you see the pincushion distortion in the third photo...
Yesterday my breakout boards arrived, and I put them to the test. First I soldered the (tiny!) chip's six pins to the breakout board. Once I got the first pin soldered the chip was held in place; then the rest of the pins were easy. I'm going to try gluing the chip down next time, before soldering. Then I soldered some double-male header pins in place, making this look like a six-pin DIP, form-factor-wise. The perf board you see in the last two photos is only there to hold the header strips in place while I soldered them. The end result? A surface-mount chip now can be treated just like a DIP. I can either solder the header pins directly (which is easy with their 0.1" spacing), or I can plug the whole assembly straight into a DIP socket. Either way, that's way easier than wiring straight to that teensy little chip!
Several things other than the breakout board contributed to making this possible, and even not too difficult. The circuit board vise (entirely visible in the last photo) is inexpensive and indispensable. I have an excellent soldering iron (Hakko FX-888D) with a very pointy tip (just 0.05" diameter at the end). Finally, I have a pair of Carson CP-60 head-mounted magnifiers. These act like a low-power stereo microscope that I can use with my glasses on (so my astigmatism, which is quite awful, is corrected) – and they're automatically pointed wherever I'm looking. If you're wondering how I managed to take these photos with my iPhone, that's simple: I took them through a magnifying glass (except for the last one; that's straight up iPhone). That's why you see the pincushion distortion in the third photo...
Thursday, January 26, 2017
Obamacare benefit #25,981...
Obamacare benefit #25,981... In today's mail I received a 104 page bound book that contains a “Summary of Benefits” and “Outline of Coverage” for our new (for 2017) health insurance. The text is mostly in 9 point type (I measured it). Here's a representative paragraph chosen at random:
Sheesh. Who on earth would ever read this thing? Or even refer to it? Plus, as they tell me in the cover letter, it's all available on their web site. So, one wonders, why did they send the damn thing to me?
Answer (found on the web): because they're required to, in order to be compliant with Obamacare.
Just think how many lovely trees that stupid regulation cost us!
The policy is renewable at the option of the policyholder upon payment of the monthly premium when due or within the grace period, except in cases of intentional misrepresentation of material fact or fraud in connection with the coverage, our decision to cease offering the policy to individual policyholders, or our decision to cease offering coverage in the individual market. No modification or amendment will be effective until 30 days (or longer, as required by law) after written notice has been given to the policyholder (except for modification of the premium, which shall not be effective until 45 days after written notification has been given to the policyholder), and modification must be uniform within the product line and at the time of renewal.Got that?
Sheesh. Who on earth would ever read this thing? Or even refer to it? Plus, as they tell me in the cover letter, it's all available on their web site. So, one wonders, why did they send the damn thing to me?
Answer (found on the web): because they're required to, in order to be compliant with Obamacare.
Just think how many lovely trees that stupid regulation cost us!
Paradise ponders, jeez it's snowing again edition...
Paradise ponders, jeez it's snowing again edition... There is just no respite from this non-stop snow! Last night there was a small chance of snow in the forecast, for less than an inch. This morning when I got up there was 2" of fresh snow on the ground, and it was falling hard. The radar shows (again!) that the entire Cache Valley is free of active snow showers ... except for about a five mile diameter area centered on our house. Sheesh! So I'll be plowing and shoveling again this morning...
Once I get done with that, assuming I have any gumption left at all, I'll be installing the replacement Nest thermostat I received a few days ago.
Sometime today Debbie and I will be headed for Macey's (our grocery store) to pick up fresh ahi. We got an email from the store's seafood manager letting us know that it arrives this morning. Yum! At least we'll eat well today!
The forecast for today and the next eight days has zero chance of snow in it. I like the sound of zero! But I wonder if there's an exception for the area right around our house... :)
Once I get done with that, assuming I have any gumption left at all, I'll be installing the replacement Nest thermostat I received a few days ago.
Sometime today Debbie and I will be headed for Macey's (our grocery store) to pick up fresh ahi. We got an email from the store's seafood manager letting us know that it arrives this morning. Yum! At least we'll eat well today!
The forecast for today and the next eight days has zero chance of snow in it. I like the sound of zero! But I wonder if there's an exception for the area right around our house... :)
Wednesday, January 25, 2017
Paradise ponders, beef soup and boot zippers edition...
Paradise ponders, beef soup and boot zippers edition... Yesterday afternoon Debbie and I headed to Los Primos, as planned, for our lunch of beef soup. That's my half-barrel at right. Man, that stuff is great! Someone there really knows how to make soup...
This morning I was up at the crack of dawn, snow plowing and shoveling. We got six more inches of snow last night, and everything needed to be cleared again. It was quite cold – about 10°F – so the snow was powdery and fluffy. That makes it easy to plow, but difficult to pile. Everything in life has trade-offs. :) I was on the tractor at 6:30 am, and finished up with the last of the shoveling at 10:30 am. Four solid hours of work, and now my upper body (especially my arms) is quite tired.
After I finished this work, we ran a few errands including picking up Debbie's now-repaired boots that we left at the cobbler's a couple weeks ago. I'm happy to report that he did a very nice job of the repair, used a top-quality zipper (HKK), and charged a fair price. We'll be coming back, for sure. Talking with him today I found out that he's considering moving to Paradise. That would sure be convenient!
Here's some photos I took today around the place. Of some concern at the moment: the snow falling off my barn's roof is now piled 4.5' high - right up to the windows. If it gets any higher, I'm going to have snow piling up against the glass – not good!
This morning I was up at the crack of dawn, snow plowing and shoveling. We got six more inches of snow last night, and everything needed to be cleared again. It was quite cold – about 10°F – so the snow was powdery and fluffy. That makes it easy to plow, but difficult to pile. Everything in life has trade-offs. :) I was on the tractor at 6:30 am, and finished up with the last of the shoveling at 10:30 am. Four solid hours of work, and now my upper body (especially my arms) is quite tired.
After I finished this work, we ran a few errands including picking up Debbie's now-repaired boots that we left at the cobbler's a couple weeks ago. I'm happy to report that he did a very nice job of the repair, used a top-quality zipper (HKK), and charged a fair price. We'll be coming back, for sure. Talking with him today I found out that he's considering moving to Paradise. That would sure be convenient!
Here's some photos I took today around the place. Of some concern at the moment: the snow falling off my barn's roof is now piled 4.5' high - right up to the windows. If it gets any higher, I'm going to have snow piling up against the glass – not good!
Tuesday, January 24, 2017
Paradise ponders, the overhang of doom edition...
Paradise ponders, the overhang of doom edition... Yesterday afternoon I ventured up onto the roof of our deck, to shovel off the massive piles of snow that had fallen on it from the second floor roof. Most of the second floor roof was completely clear of any snow, as it had all fallen off – but there was one section about six feet wide that was still loaded up, almost all the way to the peak. The photo at right shows what this looked like from the deck roof. For scale, the soffits there are 18" wide. Some of those icicles are over 3' (a meter) long. The reason the snow shelf can stick out so far is that there's over an inch of solid ice on the bottom of it. Yikes! While shoveling 18" or so of snow off the deck roof, I carefully avoided getting directly under that shelf. About an hour after I finished, it came down with an enormous “whomp!” that shook the entire house (and knocked some snow off other parts of the roof in the process).
This is now the third time I've shoveled off the deck roof this winter. In between these clearings, the resulting snow piles around the deck have never fully melted. As a consequence, the piles are now 5' to 6' high, and nearly solid ice at the bottom where they have been compacted. The dogs, when taking off for a run in the yard, have to jump up to get to the snow piles, and then down into the yard.
I'm ready for this snow to be done. :)
And speaking of snow... Last night we got another 4" of powdery snow. It's powdery because it's cold, and getting colder all day today. The 10 day forecast doesn't have us getting above freezing for eight days and nights. At left you see the weather radar for northern Utah as of about a half hour ago. The light blue areas are where it's snowing. Basically it's snowing in the Wasatch mountains (a good thing!) and on Paradise. Seriously – that little plus sign with a circle around it is where Paradise is, and that's basically the only place outside the mountains where it's snowing. Sheesh!
So this morning I will be out plowing and blowing and shoveling again. After that, though, I should have a snow removal respite for at least a week. Looking forward to that, I am...
And today is soup day! Los Primos has beef soup today, and Debbie and I are planning our lunch there...
This is now the third time I've shoveled off the deck roof this winter. In between these clearings, the resulting snow piles around the deck have never fully melted. As a consequence, the piles are now 5' to 6' high, and nearly solid ice at the bottom where they have been compacted. The dogs, when taking off for a run in the yard, have to jump up to get to the snow piles, and then down into the yard.
I'm ready for this snow to be done. :)
And speaking of snow... Last night we got another 4" of powdery snow. It's powdery because it's cold, and getting colder all day today. The 10 day forecast doesn't have us getting above freezing for eight days and nights. At left you see the weather radar for northern Utah as of about a half hour ago. The light blue areas are where it's snowing. Basically it's snowing in the Wasatch mountains (a good thing!) and on Paradise. Seriously – that little plus sign with a circle around it is where Paradise is, and that's basically the only place outside the mountains where it's snowing. Sheesh!
So this morning I will be out plowing and blowing and shoveling again. After that, though, I should have a snow removal respite for at least a week. Looking forward to that, I am...
And today is soup day! Los Primos has beef soup today, and Debbie and I are planning our lunch there...
Trump and trade...
Trump and trade... Well, he promised during the campaign that he would deep-six the TPP, and he did. It's challenging to assess what that really means, given the hysterics both sides are spooning up to the press. There's precious little actual analysis out there, though there is some if you look hard enough.
What are my thoughts? Well, I'm a committed proponent of free trade. As in total free trade – I think the world would be much better off if there were either no import/export taxes or other barriers, or if they were fixed and constant (think VAT) across all countries. But I know that's a fantasy, one that I'll never live to see.
But the TPP never was a “free trade” agreement. It was, instead, an agreement to reduce or eliminate trade barriers in certain cases, with boatloads of exceptions for various countries that wanted to protect certain internal industries. It was more like a gigantic and unwieldy conventional trade agreement than it was a free trade agreement. I suspect it was doomed to fail in the long run even had it been approved here in the U.S. I'm not sure (and I doubt anyone really is, despite the proliferation of firmly held opinions) whether the U.S. was a net winner or loser under the agreement. I don't have strong feelings about it either way. I'm ok with it being trashed.
Actual free trade, or movement in that direction, is another story altogether. On that front, Trump's rhetoric is rather depressing to me. He hasn't actually done anything yet, so we don't really know for sure if his actions will match that rhetoric. It's possible (he says, trying to be optimistic) that the rhetoric is mainly staking out a bargaining position, and that in the end he'll negotiate something more to my liking. NAFTA promises to be an early “tell” – he's already announced that he's going to renegotiate it. All the sober analysis I can lay my hands on says that NAFTA is a huge win for the U.S. (and our trading partners – it's not a zero-sum game). Where we end up on NAFTA will foreshadow Trump's trade policy, I think, so I'm following that avidly...
What are my thoughts? Well, I'm a committed proponent of free trade. As in total free trade – I think the world would be much better off if there were either no import/export taxes or other barriers, or if they were fixed and constant (think VAT) across all countries. But I know that's a fantasy, one that I'll never live to see.
But the TPP never was a “free trade” agreement. It was, instead, an agreement to reduce or eliminate trade barriers in certain cases, with boatloads of exceptions for various countries that wanted to protect certain internal industries. It was more like a gigantic and unwieldy conventional trade agreement than it was a free trade agreement. I suspect it was doomed to fail in the long run even had it been approved here in the U.S. I'm not sure (and I doubt anyone really is, despite the proliferation of firmly held opinions) whether the U.S. was a net winner or loser under the agreement. I don't have strong feelings about it either way. I'm ok with it being trashed.
Actual free trade, or movement in that direction, is another story altogether. On that front, Trump's rhetoric is rather depressing to me. He hasn't actually done anything yet, so we don't really know for sure if his actions will match that rhetoric. It's possible (he says, trying to be optimistic) that the rhetoric is mainly staking out a bargaining position, and that in the end he'll negotiate something more to my liking. NAFTA promises to be an early “tell” – he's already announced that he's going to renegotiate it. All the sober analysis I can lay my hands on says that NAFTA is a huge win for the U.S. (and our trading partners – it's not a zero-sum game). Where we end up on NAFTA will foreshadow Trump's trade policy, I think, so I'm following that avidly...
Monday, January 23, 2017
Paradise ponders, lots of wet, sloppy snow edition...
Paradise ponders, lots of wet, sloppy snow edition... I didn't post earlier this morning because I was out doing snow removal at first light. Overnight we got 12" to 14" of snow, and the temperature at 7 am was already 32°F (0°C) and going up. That meant that if I didn't get that snow off our driveway, it would partially melt. That sort of partially melted snow is particularly difficult to remove. The snow piles around our driveway were still fairly large, as we haven't had much melt over the past week. That meant I had no good place to put all this snow I removed, so I had to sacrifice about 400 sq. ft. (about 40 sq. meters) of driveway as a snow pile. I just finished the snow blowing and snow plowing a few minutes ago. This afternoon I'll tackle the snow shoveling. Sheesh!
The forecast has more snow for today and the next two days after that. Temperatures are forecast to go below freezing and stay there for a week, with several nights having lows in the single digits (-10° to -15°C). We leave for Hawai'i in about three weeks – I think I'm going to be ready for that!
The forecast has more snow for today and the next two days after that. Temperatures are forecast to go below freezing and stay there for a week, with several nights having lows in the single digits (-10° to -15°C). We leave for Hawai'i in about three weeks – I think I'm going to be ready for that!
Sunday, January 22, 2017
Well, that was disappointing!
Well, that was disappointing! A little while ago I got a notification that the software upgrade on my Tesla Model X had completed. Yay! Time to go out and take it for a spin and try out all the new features! Auto-driving here I come!
Oops. Not so much.
First I read through the release notes, on the car's center console. This isn't the all-singing, all-dancing upgrade I was thinking I'd be getting. It is, instead, a small step in that direction. This upgrade gives me traffic-aware cruise control (in other words, it won't crash into the car in front of you), some very limited auto-steering (apparently only on restricted-access highways, which we only get onto when we travel to Salt Lake City), and a few other things. There was also some language about the need for calibration, which might take a day or three of driving.
So, expectations set down, we drove it out for a test. I tried to put it in cruise control, and ... got an error display and a chime. Huh? Turns out even normal cruise control is disabled while the camera is calibrating. So right now my Model X isn't even working as well as it did before the update.
Dang.
I'm a little worried that “calibration” might take a long time out here where we live, as many of the roads have no painted lines at all, or only the center line.
Double dang...
Oops. Not so much.
First I read through the release notes, on the car's center console. This isn't the all-singing, all-dancing upgrade I was thinking I'd be getting. It is, instead, a small step in that direction. This upgrade gives me traffic-aware cruise control (in other words, it won't crash into the car in front of you), some very limited auto-steering (apparently only on restricted-access highways, which we only get onto when we travel to Salt Lake City), and a few other things. There was also some language about the need for calibration, which might take a day or three of driving.
So, expectations set down, we drove it out for a test. I tried to put it in cruise control, and ... got an error display and a chime. Huh? Turns out even normal cruise control is disabled while the camera is calibrating. So right now my Model X isn't even working as well as it did before the update.
Dang.
I'm a little worried that “calibration” might take a long time out here where we live, as many of the roads have no painted lines at all, or only the center line.
Double dang...
Subscribe to:
Posts (Atom)




