Office in Paradise... A long, hard day's work here – but with good results! My main computer (the MacBook Pro) is up and running in its new environment. In the second photo below you can see the current setup, just on folding tables. Later I'll be building some work surfaces with cable runs, etc. to neaten all this up. But for now, that's my (computer) work environment.
Even better, from my point of view, is that now my new office sounds good, too. Previously there were major resonances and echo effects, basically because all four walls, the floor, and the ceiling are all nearly perfect acoustic reflectors. I got some acoustic absorption panels (the wine-colored panels) and two quadratic-residue diffusers (the wooden panels with vertical slats), and the difference it makes in the sound quality of the room is dramatic. As I write this, I'm listening to an Eagles album, and it sounds great! Earlier today when I lit off my music, it was painful to listen – I had to shut it off, because I was reacting the same way one does to fingernails on a chalkboard.
Tuesday, May 3, 2016
Paradise ponders...
Paradise ponders... Oh, we had such a good day yesterday!
For starters, the weather was just about perfect. We had wall-to-wall blue sky, and the temperatures were in the high 50s or low 60s all day long. I worked inside most of the day (on my new office), but every time I went outside I reveled in the beautiful weather. A fine day in Paradise!
First job yesterday on the new office was cleanup time, and the result is at right. You'd hardly recognize that as the same space that looked like a bomb went off yesterday :) It was quite a bit of work to get all that mess cleaned up. I must have bent over 1,000 times as I picked up trash and threw it in a big plastic bag. Then I vacuumed with a Shop-Vac, using a narrow tool to maximize the suction. That took a couple hours, including periodic unclogging of the nozzle as I tried to pick up something that was too big. Finally I mopped the whole floor with a sponge mop, using two buckets and a Pine-Sol solution. The result looks great, especially in relative terms :)
The next step was to move the networking kit from a shelf just outside my new office to a table inside. That doesn't sound like much, perhaps, but it involves quite a bit of new network wiring and lots of unplugging and replugging. Past experience with such moves suggested to me that success would come only after a bunch of debugging, but such pessimism was unwarranted yesterday: everything worked on the very first try. This was not what I expected! The photo at left shows the networking kit happily humming along in its new location.
The last thing I did on the office last night was to move our Mac Mini server from the house to the shed. I set it up, reassigned its IP address (it's on a new range out in the shed), and fired it up – and it all just worked. First try. At that point it was late afternoon, and I was tired – so I figured I'd better quite while I was ahead :) This was also the last thing I had been hoping to get done yesterday, so I was on my self-imposed schedule.
Today I am moving my MacBook Pro and its associated paraphernalia. That will take a while, just because there are a lot of pieces – but it should go easily. Just a lot of walking and carrying :) Tomorrow my brother Scott will be here to help me with the heavy bits – most especially the monster of a printer I have (an HP CP4025).
I walked between the house and the shed many times yesterday, and each time I got to enjoy the yard in springtime. Toward the front of our house, the air was full of bird song. The birds feeding on our feeders are starting to get used to my presence. They used to all fly away simultaneously if they spotted me 100 feet away. Now they fly away only when individual birds get alarmed, and some of them will let me get quite close. The boldest of all is a (yet unidentified) woodpecker, who will feed on the suet feeder until I'm within about 6 feet. Second boldest are the American goldfinches, some of which will keep feeding until I get about 10 feet away. The pines above our feeders are full of perching birds waiting for their turn on the feeders, and those birds are singing their hearts out all day long. A lovely serenade on my transits between house and shed, it is.
Then there are the flowers. I'm not sure what the tree in the first photo is, but we have a row of five of them along the south side of the shed. The biggest of them is close to 30' tall. Right at the moment they are in full bloom, and their perfume fills the air near them, as sweet as any lilac. Just like the lilacs, their scent is so powerful that if you inhale through your mouth, you can taste the smell. This and the lilacs are the only two flowers I've ever been able to do that with. The second photo is a few of our red tulips, then there's a columbine (that won't bloom for a while yet), and finally the lilac that we inherited with the house. It looks much happier this spring than it did last spring. The seven lilacs that I planted last fall are out in leaf now, but I don't see any hint of flower buds on them.
Late yesterday afternoon we took a drive up the road that leads to Liberty. This is a dirt road, parts of it rough enough to warrant using a 4WD vehicle, so we took the FJ Cruiser. Of course we also took Miki and Race with us. When we let them out the front door to “load up” in the FJ, their excitement was fun to watch :)
It was a relaxing and beautiful drive. It's hard to beat springtime in the mountains. The second and third photos I took from the FJ's window – look closely and you'll see a nice, fat skunk waddling around. Just prior to this spotting we had been talking about letting Race out to swim in the stream. You would have heard no such talk after this sighting :) The three photos of the little blue flowers were all taken in the same tiny patch. For about a mile in the lower elevations, these flowers were scattered amongst other stuff on a north-facing road bank. I have no idea what they are. The last photo was my poor attempt to capture something that was very striking looking in person: a valley completely in shadow except for one solitary tree that was brightly lit up.
For starters, the weather was just about perfect. We had wall-to-wall blue sky, and the temperatures were in the high 50s or low 60s all day long. I worked inside most of the day (on my new office), but every time I went outside I reveled in the beautiful weather. A fine day in Paradise!
First job yesterday on the new office was cleanup time, and the result is at right. You'd hardly recognize that as the same space that looked like a bomb went off yesterday :) It was quite a bit of work to get all that mess cleaned up. I must have bent over 1,000 times as I picked up trash and threw it in a big plastic bag. Then I vacuumed with a Shop-Vac, using a narrow tool to maximize the suction. That took a couple hours, including periodic unclogging of the nozzle as I tried to pick up something that was too big. Finally I mopped the whole floor with a sponge mop, using two buckets and a Pine-Sol solution. The result looks great, especially in relative terms :)
The next step was to move the networking kit from a shelf just outside my new office to a table inside. That doesn't sound like much, perhaps, but it involves quite a bit of new network wiring and lots of unplugging and replugging. Past experience with such moves suggested to me that success would come only after a bunch of debugging, but such pessimism was unwarranted yesterday: everything worked on the very first try. This was not what I expected! The photo at left shows the networking kit happily humming along in its new location.
The last thing I did on the office last night was to move our Mac Mini server from the house to the shed. I set it up, reassigned its IP address (it's on a new range out in the shed), and fired it up – and it all just worked. First try. At that point it was late afternoon, and I was tired – so I figured I'd better quite while I was ahead :) This was also the last thing I had been hoping to get done yesterday, so I was on my self-imposed schedule.
Today I am moving my MacBook Pro and its associated paraphernalia. That will take a while, just because there are a lot of pieces – but it should go easily. Just a lot of walking and carrying :) Tomorrow my brother Scott will be here to help me with the heavy bits – most especially the monster of a printer I have (an HP CP4025).
I walked between the house and the shed many times yesterday, and each time I got to enjoy the yard in springtime. Toward the front of our house, the air was full of bird song. The birds feeding on our feeders are starting to get used to my presence. They used to all fly away simultaneously if they spotted me 100 feet away. Now they fly away only when individual birds get alarmed, and some of them will let me get quite close. The boldest of all is a (yet unidentified) woodpecker, who will feed on the suet feeder until I'm within about 6 feet. Second boldest are the American goldfinches, some of which will keep feeding until I get about 10 feet away. The pines above our feeders are full of perching birds waiting for their turn on the feeders, and those birds are singing their hearts out all day long. A lovely serenade on my transits between house and shed, it is.
Then there are the flowers. I'm not sure what the tree in the first photo is, but we have a row of five of them along the south side of the shed. The biggest of them is close to 30' tall. Right at the moment they are in full bloom, and their perfume fills the air near them, as sweet as any lilac. Just like the lilacs, their scent is so powerful that if you inhale through your mouth, you can taste the smell. This and the lilacs are the only two flowers I've ever been able to do that with. The second photo is a few of our red tulips, then there's a columbine (that won't bloom for a while yet), and finally the lilac that we inherited with the house. It looks much happier this spring than it did last spring. The seven lilacs that I planted last fall are out in leaf now, but I don't see any hint of flower buds on them.
Late yesterday afternoon we took a drive up the road that leads to Liberty. This is a dirt road, parts of it rough enough to warrant using a 4WD vehicle, so we took the FJ Cruiser. Of course we also took Miki and Race with us. When we let them out the front door to “load up” in the FJ, their excitement was fun to watch :)
It was a relaxing and beautiful drive. It's hard to beat springtime in the mountains. The second and third photos I took from the FJ's window – look closely and you'll see a nice, fat skunk waddling around. Just prior to this spotting we had been talking about letting Race out to swim in the stream. You would have heard no such talk after this sighting :) The three photos of the little blue flowers were all taken in the same tiny patch. For about a mile in the lower elevations, these flowers were scattered amongst other stuff on a north-facing road bank. I have no idea what they are. The last photo was my poor attempt to capture something that was very striking looking in person: a valley completely in shadow except for one solitary tree that was brightly lit up.
Monday, May 2, 2016
Paradise ponders...
Paradise ponders... It was such a beautiful day here yesterday! We had a few clouds, and lots of wind – but the temperatures were in the high 50s, and there was lots of blue sky. Birds were chirping, flowers were flowering (like our 3/4 dead flowering plum at right), and spring was in the air. Just lovely!
Most of my day was consumed by wiring and cutting holes for heating registers (second photo below) in my new office in the shed. I finished both, and now the office is ready for cleanup. It's in rather desperate need of cleanup, as you can tell by the first photo below. The detritus of construction is everywhere, there are tools scattered hither and yon, and the entire room is blanketed by a layer of gray dust. I'll be spending this morning (and maybe beyond!) just cleaning all that up. Then I start moving in!
My moving has to follow a careful sequence in order to keep me from being cut off from the Internet. The first step will be to install the router, switch, and WiFi access point that will “run” my office. That equipment is already up and running, just outside my office door. I've already installed (and tested!) the through-wall wiring. So ... theoretically all I have to do is to move that equipment 3 feet or so into the office. I've never had any sort of network reconfiguration work that easily, though :) I'm fulling expecting some unanticipated glitch.
Once the networking gear is up and running, I'm going to move my little Mac Mini server from the house to the new office. Theoretically that should only involve a change in its IP address, but once again, I'm expecting the unexpected on that front. Finally, once all that is up and running, it will be time to move my personal computer (a MacBook Pro and associated monitors, keyboards, etc.) over. That, at least, should go easily, as its IP address is obtained through DHCP.
I have quite a bit of “stuff” currently scattered all over the second floor of our house that needs to be moved into my new office (where I have plenty of room!). Much of this is not computer-related at all: a microscope, electronics, etc. For the moment, this will all go onto the same set of folding tables that we've been using for office furniture in the house. Later I plan to start building out my own furniture, making good use of the cabinet shop I have downstairs. I'm really looking forward to that – should be lots of fun for me!
The “infrastructure” of my office still has some ways to go besides furniture, too. I have a little refrigerator coming in a week. I'm planning on installing a small sink and counter-top, so I can have tea and snacks without having to come back into the house. There's the heating system to finish, too. And most likely (after I see what summer is like) I'll be installing a little split-system air conditioner as well. Something tells me I won't be done this year :)
Most of my day was consumed by wiring and cutting holes for heating registers (second photo below) in my new office in the shed. I finished both, and now the office is ready for cleanup. It's in rather desperate need of cleanup, as you can tell by the first photo below. The detritus of construction is everywhere, there are tools scattered hither and yon, and the entire room is blanketed by a layer of gray dust. I'll be spending this morning (and maybe beyond!) just cleaning all that up. Then I start moving in!
My moving has to follow a careful sequence in order to keep me from being cut off from the Internet. The first step will be to install the router, switch, and WiFi access point that will “run” my office. That equipment is already up and running, just outside my office door. I've already installed (and tested!) the through-wall wiring. So ... theoretically all I have to do is to move that equipment 3 feet or so into the office. I've never had any sort of network reconfiguration work that easily, though :) I'm fulling expecting some unanticipated glitch.
Once the networking gear is up and running, I'm going to move my little Mac Mini server from the house to the new office. Theoretically that should only involve a change in its IP address, but once again, I'm expecting the unexpected on that front. Finally, once all that is up and running, it will be time to move my personal computer (a MacBook Pro and associated monitors, keyboards, etc.) over. That, at least, should go easily, as its IP address is obtained through DHCP.
I have quite a bit of “stuff” currently scattered all over the second floor of our house that needs to be moved into my new office (where I have plenty of room!). Much of this is not computer-related at all: a microscope, electronics, etc. For the moment, this will all go onto the same set of folding tables that we've been using for office furniture in the house. Later I plan to start building out my own furniture, making good use of the cabinet shop I have downstairs. I'm really looking forward to that – should be lots of fun for me!
The “infrastructure” of my office still has some ways to go besides furniture, too. I have a little refrigerator coming in a week. I'm planning on installing a small sink and counter-top, so I can have tea and snacks without having to come back into the house. There's the heating system to finish, too. And most likely (after I see what summer is like) I'll be installing a little split-system air conditioner as well. Something tells me I won't be done this year :)
Sunday, May 1, 2016
Alcohol in Utah...
Alcohol in Utah... This is the last post in my series that's aimed at the attendees of the National Field Spaniel Association, which is in Logan, Utah (12 miles north of us) starting in late May. People will be coming from all over the country to attend this, so many of them will not be familiar with Utah's ... somewhat odd ... laws and customs regarding the consumption of alcohol.
Buying and drinking alcoholic beverages in Utah is a bit different than in most other U.S. states. First thing to know: you must be 21 years old to legally imbibe (or purchase) any alcoholic beverage. Though Debbie and I are so ancient we can't even remember being 21, we're told that this law is quite strictly enforced. Retail sales of any drink containing more than 3.2% alcohol is restricted to the state liquor stores. These stores are actually owned by the state, and the selection in them is decent, but limited (especially for nicer wines and liquors). The only state liquor store in Cache County is located at 75 W 400 N in Logan, about 8 blocks away from the fairgrounds (see the green pin on this map). It's open from 11 am to 10 pm, Monday through Saturday (and of course it's closed on Sunday).
A high proportion of Cache County's residents are members of the LDS (Mormon) Church, and the church's Health Laws prohibit the consumption of alcohol (along with tobacco, coffee, tea, and illegal drugs – but not caffeinated sodas or chocolate). The proportion of LDS members in Logan is a bit lower (around 80%) than the rest of the county, but still very high. Not all LDS members obey the Health Laws, as seems evident from the rather brisk business the state liquor store does. Nevertheless, the general community attitude toward alcohol consumption is disapproving. Probably because of this, it is extremely unusual to see any public consumption (outside of approved venues) or even the slightest indication of public inebriation. We've lived here for over two years now, and we have yet to see a public drunk – or smelled stale urine in the alleyways. This isn't all bad :)
You can also drink in many restaurants, because Utah's liquor laws (and more) allow alcohol only when served with food (with a few exceptions). Some of these restaurants have licenses for just beer, just wine and beer, and some for full-service bars. Debbie and I do most of our drinking at home :), so we have limited experience with the drinks at restaurants. Cafe Sabor and Elements both have full-service bars (and Cafe Sabor is known locally for their margaritas). Jack's Wood-Fired Oven, Callaway's, and Le Nonne all have beer and wine (and Le Nonne has a decent wine list compared with most local joints).
As far as the more, er, traditional sort of alcohol-fueled night life, the only place around here we've even heard of is Mulligan's (see the yellow pin on the map). The two people who have mentioned it to me did so disparagingly, and their 2.5 star review on Yelp isn't encouraging. Logan is most definitely not known for its nightlife :)
The complete list of liquor licenses in Cache County (Smithfield and Richmond are towns just north of Logan):
Buying and drinking alcoholic beverages in Utah is a bit different than in most other U.S. states. First thing to know: you must be 21 years old to legally imbibe (or purchase) any alcoholic beverage. Though Debbie and I are so ancient we can't even remember being 21, we're told that this law is quite strictly enforced. Retail sales of any drink containing more than 3.2% alcohol is restricted to the state liquor stores. These stores are actually owned by the state, and the selection in them is decent, but limited (especially for nicer wines and liquors). The only state liquor store in Cache County is located at 75 W 400 N in Logan, about 8 blocks away from the fairgrounds (see the green pin on this map). It's open from 11 am to 10 pm, Monday through Saturday (and of course it's closed on Sunday).
A high proportion of Cache County's residents are members of the LDS (Mormon) Church, and the church's Health Laws prohibit the consumption of alcohol (along with tobacco, coffee, tea, and illegal drugs – but not caffeinated sodas or chocolate). The proportion of LDS members in Logan is a bit lower (around 80%) than the rest of the county, but still very high. Not all LDS members obey the Health Laws, as seems evident from the rather brisk business the state liquor store does. Nevertheless, the general community attitude toward alcohol consumption is disapproving. Probably because of this, it is extremely unusual to see any public consumption (outside of approved venues) or even the slightest indication of public inebriation. We've lived here for over two years now, and we have yet to see a public drunk – or smelled stale urine in the alleyways. This isn't all bad :)
You can also drink in many restaurants, because Utah's liquor laws (and more) allow alcohol only when served with food (with a few exceptions). Some of these restaurants have licenses for just beer, just wine and beer, and some for full-service bars. Debbie and I do most of our drinking at home :), so we have limited experience with the drinks at restaurants. Cafe Sabor and Elements both have full-service bars (and Cafe Sabor is known locally for their margaritas). Jack's Wood-Fired Oven, Callaway's, and Le Nonne all have beer and wine (and Le Nonne has a decent wine list compared with most local joints).
As far as the more, er, traditional sort of alcohol-fueled night life, the only place around here we've even heard of is Mulligan's (see the yellow pin on the map). The two people who have mentioned it to me did so disparagingly, and their 2.5 star review on Yelp isn't encouraging. Logan is most definitely not known for its nightlife :)
The complete list of liquor licenses in Cache County (Smithfield and Richmond are towns just north of Logan):
BLACK PEARL ASIAN BISTRO & SUSHI BAR
|
2095 N MAIN BLDG A UNIT C
|
LOGAN
|
BUFFALO WILD WINGS (LOGAN)
|
43 E 1400 N
|
LOGAN
|
CAFE SABOR (LOGAN)
|
600 W CTR ST
|
LOGAN
|
CALLAWAY'S
|
54 N MAIN
|
SMITHFIELD
|
CHILI'S SOUTHWEST GRILL (LOGAN)
|
1427 N MAIN BLDG C
|
LOGAN
|
CRUMB BROTHERS
|
291 S 300 W
|
LOGAN
|
EAGLES 3114 (LOGAN)
|
170 W 900 N
|
LOGAN
|
EL TORO VIEJO
|
1111 N MAIN STREET
|
LOGAN
|
ELEMENT RESTAURANT
|
35 E 640 S
|
LOGAN
|
FIREHOUSE PIZZERIA
|
682 S MAIN ST
|
LOGAN
|
GALLERY CAFE @ BIRCH CREEK G.C.
|
550 E 100 N
|
SMITHFIELD
|
GAUCHO GRILL OF LOGAN
|
633 S MAIN
|
LOGAN
|
GIA'S RESTAURANT & FACTORY PIZZERIA
|
119 S MAIN
|
LOGAN
|
HUHOT OF LOGAN
|
660 S MAIN ST
|
LOGAN
|
IRON GATE CONCESSIONS
|
550 W 1000 S
|
LOGAN
|
JACKS WOOD-FIRED OVEN
|
256 N MAIN ST
|
LOGAN
|
JIM'S GRILL
|
101 N MAIN ST STE A
|
SMITHFIELD
|
KABUKI JAPANESE STEAKHOUSE
|
461 N MAIN ST
|
LOGAN
|
LD'S CAFE
|
39 W MAIN
|
RICHMOND
|
LE NONNE
|
129 N 100 EAST
|
LOGAN
|
LOGAN GOLF & COUNTRY CLUB
|
710 N 1500 E
|
LOGAN
|
LOGAN STEAKHOUSE
|
2427 N MAIN ST
|
LOGAN
|
MULLIGAN'S
|
33 FEDERAL AVE
|
LOGAN
|
NOODLES & CO. (LOGAN)
|
1430 N MAIN ST
|
LOGAN
|
OASIS RESTAURANT
|
235 S MAIN
|
LOGAN
|
OLIVE GARDEN (LOGAN)
|
1220 N MAIN ST
|
LOGAN
|
RIVERWOODS CONFERENCE CENTER
|
615 S 80 E
|
LOGAN
|
SIZZLER # 439 (LOGAN)
|
1165 N MAIN
|
LOGAN
|
SULTAN'S TAVERN
|
205 S MAIN
|
LOGAN
|
TAKARA SUSHI JAPANESE RESTAURANT
|
55 W 1000 N
|
LOGAN
|
TANDOORI OVEN
|
720 E 1000 N
|
LOGAN
|
TEXAS ROADHOUSE (LOGAN)
|
42 E 1400 N
|
LOGAN
|
THE BEEHIVE GRILL
|
255 S MAIN
|
LOGAN
|
THE BULL'S HEAD
|
1111 N 800 E
|
LOGAN
|
WHITE OWL
|
36 W CENTER
|
LOGAN
|
Saturday, April 30, 2016
Paradise ponders, cont'd...
Paradise ponders, cont'd... I ended up not working all that much on my office today – lots of other things intervened. But I do have a photo of the ceiling fan, installed :)
My tutoring session with Abby S. went exceptionally well. She is picking up the concepts behind programming quickly, and with great enthusiasm. Today she and I worked together to build a little web page using the Web Audio API to play a single musical note that could be either a pure tone or a chord with an arbitrary number of component tones. Her homework is to turn that into a program that can play two notes. We'll be expanding this into a program that can play a tune.
I thought we'd spend most of today working on her understanding of a two-dimensional lookup table, where one dimension was indexed by the musical note name and the other by an octave number. The result would be the frequency of the note. Instead of spending an hour or so on it, she had it nailed in less than five minutes – and passed all my tests of her understanding easily. This is a reasonably complex data structure for such a novice programmer, but she picked it up very easily. As an experiment, I showed her how (in the debugger) to drill down into the “document” variable (which is a very complex data structure that contains the entirety of the currently displayed web page). She got the general idea of that sort of nested tree structure immediately.
It's fun teaching someone so bright and motivated! And Debbie loves to feed her treats, so we got a lemon pie out of this, too :)
My brother Scott came to visit a little later, and we went to my neighbor Tim D.'s house to pick up a load of firewood that Tim gave me. While there, Scott got to meet Tim's wife Jeannie – and her new puppy Gus. That little guy had just been brought home from the breeder, at age 6 weeks. He looked terrified when we first saw him – it was his first time out of the crate he was born in. By the time we left, about a half hour later, little Gus was running around playing with their other two dogs (Lexy and Marley), along with any human who happened to be standing nearby. This little fellow is going to be just fine, I think. Debbie came over to see Gus, too, and I think she's going to end up helping Jeannie train him. That is one cute little puppy!
My tutoring session with Abby S. went exceptionally well. She is picking up the concepts behind programming quickly, and with great enthusiasm. Today she and I worked together to build a little web page using the Web Audio API to play a single musical note that could be either a pure tone or a chord with an arbitrary number of component tones. Her homework is to turn that into a program that can play two notes. We'll be expanding this into a program that can play a tune.
I thought we'd spend most of today working on her understanding of a two-dimensional lookup table, where one dimension was indexed by the musical note name and the other by an octave number. The result would be the frequency of the note. Instead of spending an hour or so on it, she had it nailed in less than five minutes – and passed all my tests of her understanding easily. This is a reasonably complex data structure for such a novice programmer, but she picked it up very easily. As an experiment, I showed her how (in the debugger) to drill down into the “document” variable (which is a very complex data structure that contains the entirety of the currently displayed web page). She got the general idea of that sort of nested tree structure immediately.
It's fun teaching someone so bright and motivated! And Debbie loves to feed her treats, so we got a lemon pie out of this, too :)
My brother Scott came to visit a little later, and we went to my neighbor Tim D.'s house to pick up a load of firewood that Tim gave me. While there, Scott got to meet Tim's wife Jeannie – and her new puppy Gus. That little guy had just been brought home from the breeder, at age 6 weeks. He looked terrified when we first saw him – it was his first time out of the crate he was born in. By the time we left, about a half hour later, little Gus was running around playing with their other two dogs (Lexy and Marley), along with any human who happened to be standing nearby. This little fellow is going to be just fine, I think. Debbie came over to see Gus, too, and I think she's going to end up helping Jeannie train him. That is one cute little puppy!
Paradise ponders...
Paradise ponders... What a busy day here yesterday! It started around 4:30 am, when the milkman drove in and set off the dogs. Sleepily we realized that we'd forgotten to set out the empty jugs. Oops! No matter, they left our two and a half gallons anyway :)
I filled the bird feeders after our morning caffeiniation. We're using about 10 pounds of black oil sunflower seed per week right now, along with around 6 pounds of “high value” food (nuts, dried fruit, shelled sunflowers) and 4 pounds of Nijer thistle. All the sunflower seed and thistle feeders have to be refilled daily. Our feeders attract huge numbers of American goldfinches (often more than 50 at a time), Lesser's goldfinches, house finches, and red-winged blackbirds. We also get chickadees and nuthatches in smaller numbers, and a couple of (so far unidentified) woodpeckers that love to hang on our suet feeder (which is loaded with a mixture of lard and peanut butter). The occasional magpie comes in and tries to figure out how to get to the seeds, but all our feeders are magpie-proof. We also get Asian pigeons that like to hunt on the ground for misplaced seeds. The sound from all these birds is something I greatly enjoy: if you open our front door it can be quite overwhelming. Our UPS deliveryman commented on the sound yesterday, amazed that it was always like this...
I started working on my office in the shed in the morning, finishing up the wiring of the outlet strips. Then I decided to get ready for the ceiling fan that was scheduled for delivery in the afternoon. On Thursday I had purchased an “old work” (retrofit) ceiling fan box that could be installed through a 4" diameter hole. I marked the center of the room, offset a few inches to avoid a truss (detected by knocking on the ceiling), and then cut my hole with the oscillating saw (love that thing!). Next step was initially a stumper: how do I get the wire from the hole in the ceiling to the wall where I had power available?
The ceiling hole is 13' from the exposed wall with power, and the intervening space was filled with trusses and blown-in insulation. There's no way that I could squeeze into that space – and even if I could, I'd wreck the 18" thick blanket of insulation. My first thought was that I'd poke the 14 gauge Romex up through the hole while Debbie watched from outside and gave me some guidance. That plan fell apart when I discovered that Debbie was not comfortable climbing the ladder (all these years and I never knew she had a fear of ladders!). My second plan worked much better. I have a “fish” – a fiberglass rod in screw-together sections – that's designed for fishing wires through walls. That rod is quite flexible, about like a wire coat-hanger. I screwed together enough sections to make a 15' “pole”, then wiggled it so that the far end was roughly over the hole in the ceiling (I had to guess about that, as the hole was covered by all that insulation and I couldn't actually see where it was). Then I got on a ladder inside my office, stuck my arm up through that hole, and felt around until I felt the fish. Success! Then all I had to do was to tie the Romex onto the end of the fish, go outside and pull the fish out. That worked great.
The fan ceiling box turned out to be trivially easy to install. I'd expected that job to take a few hours, but instead it was under a half hour, beginning to end. When the fan came in the afternoon, I had it installed onto the new box in under an hour – and it all worked on the first try (even the snazzy remote control that came with the fan). Now my office has a fan to circulate the air warmed by the wood stove, and some lights. Yay!
This morning my student Abby S. should be here for a lesson, and then my brother Scott is going to be here to help out a bit. I'm hoping to be able to finish up that last bit of outlet strip wiring, and I also need to install the fan's remote control into a hole in the wall. Once that's complete, it's cleanup time – and then I'll be moving my stuff over to the office...
I filled the bird feeders after our morning caffeiniation. We're using about 10 pounds of black oil sunflower seed per week right now, along with around 6 pounds of “high value” food (nuts, dried fruit, shelled sunflowers) and 4 pounds of Nijer thistle. All the sunflower seed and thistle feeders have to be refilled daily. Our feeders attract huge numbers of American goldfinches (often more than 50 at a time), Lesser's goldfinches, house finches, and red-winged blackbirds. We also get chickadees and nuthatches in smaller numbers, and a couple of (so far unidentified) woodpeckers that love to hang on our suet feeder (which is loaded with a mixture of lard and peanut butter). The occasional magpie comes in and tries to figure out how to get to the seeds, but all our feeders are magpie-proof. We also get Asian pigeons that like to hunt on the ground for misplaced seeds. The sound from all these birds is something I greatly enjoy: if you open our front door it can be quite overwhelming. Our UPS deliveryman commented on the sound yesterday, amazed that it was always like this...
I started working on my office in the shed in the morning, finishing up the wiring of the outlet strips. Then I decided to get ready for the ceiling fan that was scheduled for delivery in the afternoon. On Thursday I had purchased an “old work” (retrofit) ceiling fan box that could be installed through a 4" diameter hole. I marked the center of the room, offset a few inches to avoid a truss (detected by knocking on the ceiling), and then cut my hole with the oscillating saw (love that thing!). Next step was initially a stumper: how do I get the wire from the hole in the ceiling to the wall where I had power available?
The ceiling hole is 13' from the exposed wall with power, and the intervening space was filled with trusses and blown-in insulation. There's no way that I could squeeze into that space – and even if I could, I'd wreck the 18" thick blanket of insulation. My first thought was that I'd poke the 14 gauge Romex up through the hole while Debbie watched from outside and gave me some guidance. That plan fell apart when I discovered that Debbie was not comfortable climbing the ladder (all these years and I never knew she had a fear of ladders!). My second plan worked much better. I have a “fish” – a fiberglass rod in screw-together sections – that's designed for fishing wires through walls. That rod is quite flexible, about like a wire coat-hanger. I screwed together enough sections to make a 15' “pole”, then wiggled it so that the far end was roughly over the hole in the ceiling (I had to guess about that, as the hole was covered by all that insulation and I couldn't actually see where it was). Then I got on a ladder inside my office, stuck my arm up through that hole, and felt around until I felt the fish. Success! Then all I had to do was to tie the Romex onto the end of the fish, go outside and pull the fish out. That worked great.
The fan ceiling box turned out to be trivially easy to install. I'd expected that job to take a few hours, but instead it was under a half hour, beginning to end. When the fan came in the afternoon, I had it installed onto the new box in under an hour – and it all worked on the first try (even the snazzy remote control that came with the fan). Now my office has a fan to circulate the air warmed by the wood stove, and some lights. Yay!
This morning my student Abby S. should be here for a lesson, and then my brother Scott is going to be here to help out a bit. I'm hoping to be able to finish up that last bit of outlet strip wiring, and I also need to install the fan's remote control into a hole in the wall. Once that's complete, it's cleanup time – and then I'll be moving my stuff over to the office...
Friday, April 29, 2016
One of my favorite bloggers...
One of my favorite bloggers ... writing about another of my favorite bloggers: Megan McArdle on Warren Meyer. It's hard to get better than that :)
Thursday, April 28, 2016
Some detail on the office wiring project...
Some detail on the office wiring project... As requested by reader John L., who wondered how I was wiring up those power strips. The power strips came with a 6 foot long 14 gauge power cord, terminated in a molded plug. When I took the cover off of one, I discovered that the power cord was machine-crimped solidly into internal bus bars. Since I needed longer (much longer!) power cords, I cut the power cords off, leaving a short stub. Then I used crimp butt connectors (first photo) to patch in a piece of 12 gauge service cable (heavy duty, flexible power cord) cut to the right length to plug into the outlets I installed (third photo). I covered the connection with a piece of heat shrink (second photo). The outlets are fed from the circuit breaker panel with 10 gauge solid Romex in plastic conduit. The last photo shows the result along one wall; the others are made the same way.
All of the outlet strips are mounted 24" off the floor, where they'll be completely hidden under the workbenches, tables, and desks I'll be putting up.
The ceiling fan will be in the very center of the room. This afternoon I bought a special electrical box designed for installation through an existing ceiling, through a hole just big enough to fit the box. It uses a pair of extensible brackets to fasten itself into to adjacent joists in the ceiling. In the case of my office, those will actually be the bottoms of factory-made roof trusses, mounted on 16" centers. The ceiling of my office has about 18" of blown-in insulation on top of it, so I'll be poking a piece of Romex through the ceiling hole and threading it through nine trusses to get it to a wall where I can supply power. That oughtta be fun! I think I'll enlist Debbie's help to guide me on that one :)
All of the outlet strips are mounted 24" off the floor, where they'll be completely hidden under the workbenches, tables, and desks I'll be putting up.
The ceiling fan will be in the very center of the room. This afternoon I bought a special electrical box designed for installation through an existing ceiling, through a hole just big enough to fit the box. It uses a pair of extensible brackets to fasten itself into to adjacent joists in the ceiling. In the case of my office, those will actually be the bottoms of factory-made roof trusses, mounted on 16" centers. The ceiling of my office has about 18" of blown-in insulation on top of it, so I'll be poking a piece of Romex through the ceiling hole and threading it through nine trusses to get it to a wall where I can supply power. That oughtta be fun! I think I'll enlist Debbie's help to guide me on that one :)
Paradise ponders...
Paradise ponders... It was a busy day today, with lots of different things competing for attention. In between other things I managed to get some work done on my office wiring, but I didn't finish today as I expected to.
One of the interruptions today was from Amazon, telling me that the ceiling fan I'd ordered for my office will be here tomorrow, instead of the end of next week. Woo hoo! More wiring! There is good news there, though: now I can do all the really messy work before I start actually moving my stuff into the new office. But I also had to make a run to Lowe's, to get the parts I'd need to wire up that ceiling fan :)
Another interruption today was very welcome: our builder (Jim J., the same fellow who built my shed) came over to go over the plans for the changes we're making to the house. He's getting ready to pull a permit, and once he has that he's going to start working. It's going to be a mess around the house for a while once that starts! Demolition of old concrete, on all three construction areas (mud room, sun room, and patio), is the first step. Big mess!
Then came a call from Darren N., who works for Thomas Petroleum. I'd told him last year of my interest in getting a tank for diesel and for gasoline. He called to let me know that they've just gotten a bunch of used 500 gallon tanks in, rugged outdoor tanks with high stands – perfect for gravity fed fueling of my tractor, our cars, etc. These things were being used in the oil industry to support field operations, but with the tumble in oil prices the oil companies cut way back on field operations and sold off a bunch of stuff – including these tanks. They're a steal at the price on offer: $500 refurbished, delivered, and installed – including a hose and filler nozzle. I ordered two for us. That means that we'll be able to have a supply of tax-free diesel on hand for my tractor, and regular gasoline for all our vehicles and other equipment. One more little piece of self-sufficiency!
Early this afternoon Gerald (the fellow who does annual maintenance for Golden Spike Electric) came out to do the annual maintenance on our backup generators. As we're starting to expect out here, he's a really nice fellow – and competent, vastly experienced, and conscientious about his work. I had an enjoyable conversation with him about his experiences, especially as a Mormon missionary in Barcelona, Spain. That was about 40 years ago, but it's still fresh in his mind; a formative experience for him.
While working in my new office this morning, I got kind of cold, as it was only in the low 40s. So I started a fire in the wood stove I had installed last fall – that's the first time I'd tried it out. All was fine until the stove started to get hot, and then all of a sudden the new paint on the exterior started giving off some really obnoxious fumes. They warn you about these fumes in the manual, saying that some people might find them unpleasant. That's about like saying that some people might find having their legs run over by a bulldozer unpleasant! Those fumes had me running from the room in fear for my life from poisonous fumes. I held my breath and went back in to open all the windows wide, then evacuated for an hour until the fumes had cleared. Oh, they were awful! I hope that phase of this stove's life is over quickly! It did warm up the room nicely, though :)
Debbie and I went out to Angie's for a nice late lunch. We both had the cod fish fry, and chicken noodle soup. Wonderful, as always, it was...
One of the interruptions today was from Amazon, telling me that the ceiling fan I'd ordered for my office will be here tomorrow, instead of the end of next week. Woo hoo! More wiring! There is good news there, though: now I can do all the really messy work before I start actually moving my stuff into the new office. But I also had to make a run to Lowe's, to get the parts I'd need to wire up that ceiling fan :)
Another interruption today was very welcome: our builder (Jim J., the same fellow who built my shed) came over to go over the plans for the changes we're making to the house. He's getting ready to pull a permit, and once he has that he's going to start working. It's going to be a mess around the house for a while once that starts! Demolition of old concrete, on all three construction areas (mud room, sun room, and patio), is the first step. Big mess!
Then came a call from Darren N., who works for Thomas Petroleum. I'd told him last year of my interest in getting a tank for diesel and for gasoline. He called to let me know that they've just gotten a bunch of used 500 gallon tanks in, rugged outdoor tanks with high stands – perfect for gravity fed fueling of my tractor, our cars, etc. These things were being used in the oil industry to support field operations, but with the tumble in oil prices the oil companies cut way back on field operations and sold off a bunch of stuff – including these tanks. They're a steal at the price on offer: $500 refurbished, delivered, and installed – including a hose and filler nozzle. I ordered two for us. That means that we'll be able to have a supply of tax-free diesel on hand for my tractor, and regular gasoline for all our vehicles and other equipment. One more little piece of self-sufficiency!
Early this afternoon Gerald (the fellow who does annual maintenance for Golden Spike Electric) came out to do the annual maintenance on our backup generators. As we're starting to expect out here, he's a really nice fellow – and competent, vastly experienced, and conscientious about his work. I had an enjoyable conversation with him about his experiences, especially as a Mormon missionary in Barcelona, Spain. That was about 40 years ago, but it's still fresh in his mind; a formative experience for him.
While working in my new office this morning, I got kind of cold, as it was only in the low 40s. So I started a fire in the wood stove I had installed last fall – that's the first time I'd tried it out. All was fine until the stove started to get hot, and then all of a sudden the new paint on the exterior started giving off some really obnoxious fumes. They warn you about these fumes in the manual, saying that some people might find them unpleasant. That's about like saying that some people might find having their legs run over by a bulldozer unpleasant! Those fumes had me running from the room in fear for my life from poisonous fumes. I held my breath and went back in to open all the windows wide, then evacuated for an hour until the fumes had cleared. Oh, they were awful! I hope that phase of this stove's life is over quickly! It did warm up the room nicely, though :)
Debbie and I went out to Angie's for a nice late lunch. We both had the cod fish fry, and chicken noodle soup. Wonderful, as always, it was...
Wednesday, April 27, 2016
Paradise ponders...
Paradise ponders... I've been working out in my new office in our shed, wiring up network connections and power. Today I got one 30 amp circuit wired up, terminating in a two-gang duplex outlet box (the blue box in the photo at right). This will power four 12 outlet power strips like the one that's visible in that same photo. Two of those power strips are wired up now. I'm pretty sure I'll be able to finish all the power strips and the second 30 amp circuit tomorrow. Worst case it will take me part of Friday.
Yesterday Debbie made us a delicious late lunch: BLTs. But these were no ordinary BLTs, no siree. The bacon was Daley's applewood-smoked bacon. The tomatoes were ripe, delicious Utah tomatoes – grown in a hot house, but excellent nonetheless. The lettuce was crisp. There were three slices of smoked gouda cheese. The roll was fresh from Macey's bakery, a green onion and asiago cheese thing of wonder. And then we had Duke's mayonnaise on it. Best BLT evah! Added bonus: the house smelled great for hours afterwards.
This evening we went for a drive out toward Ant Flats, in the FJ Cruiser with Mike and Race riding in back. At first we didn't see very much wildlife – not even a single deer on the way in. Then near where we turned around, we saw a golden eagle hunting up on a ridge to our east. We stopped at a fishing spot that was unoccupied, and let the dogs out. Race jumped into the stream with great joy, chasing down a stick (Debbie got video; I'll post it once I've got it). When they jumped back into the FJ, we were almost overwhelmed by the perfume of wet dog :) Then on the way back home we (finally!) saw several deer, about a dozen all together, in three groups. The dogs were very happy :)
Yesterday Debbie made us a delicious late lunch: BLTs. But these were no ordinary BLTs, no siree. The bacon was Daley's applewood-smoked bacon. The tomatoes were ripe, delicious Utah tomatoes – grown in a hot house, but excellent nonetheless. The lettuce was crisp. There were three slices of smoked gouda cheese. The roll was fresh from Macey's bakery, a green onion and asiago cheese thing of wonder. And then we had Duke's mayonnaise on it. Best BLT evah! Added bonus: the house smelled great for hours afterwards.
This evening we went for a drive out toward Ant Flats, in the FJ Cruiser with Mike and Race riding in back. At first we didn't see very much wildlife – not even a single deer on the way in. Then near where we turned around, we saw a golden eagle hunting up on a ridge to our east. We stopped at a fishing spot that was unoccupied, and let the dogs out. Race jumped into the stream with great joy, chasing down a stick (Debbie got video; I'll post it once I've got it). When they jumped back into the FJ, we were almost overwhelmed by the perfume of wet dog :) Then on the way back home we (finally!) saw several deer, about a dozen all together, in three groups. The dogs were very happy :)
Koa, RIP...
Koa, RIP... It's been a tough week for the animals at our house. First we lost Mo'i this past Friday. Then today when we took Koa in for a recheck after his surgery last month, we discovered that his tumor was growing very quickly, and worse, had spread to his internal organs. Our vet (Dr. Russell) thought it was likely he was in pain and unlikely that he'd survive long no matter what we did – so we made the decision to say goodbye to him today. Once again, this was not a surprise – after his original diagnosis and surgery, we knew his chances weren't good even for the near term. It was still hard.
There is one thing that has made this awful decision a bit easier for us since we moved up here. Unlike any other veterinarian we've ever had (including several we called friends), Dr. Andrea Russell here has been willing to give us direct answers to tough questions around these end-of-life decisions. If you ask her for advice, you'll get it. If you ask her what she'd do, she'll tell you. Such a simple thing, it sounds like – and yet it's something no other vet has ever been willing to provide. I can imagine some people might find that blunt, and perhaps a bit unfeeling – but we think it's the most helpful thing she could do in such a difficult and emotional situation...
There is one thing that has made this awful decision a bit easier for us since we moved up here. Unlike any other veterinarian we've ever had (including several we called friends), Dr. Andrea Russell here has been willing to give us direct answers to tough questions around these end-of-life decisions. If you ask her for advice, you'll get it. If you ask her what she'd do, she'll tell you. Such a simple thing, it sounds like – and yet it's something no other vet has ever been willing to provide. I can imagine some people might find that blunt, and perhaps a bit unfeeling – but we think it's the most helpful thing she could do in such a difficult and emotional situation...
Tuesday, April 26, 2016
An alternative approach...
An alternative approach... Via my pistol-packing mama...
Einstein's famous formula: E=MC² (Energy = Mass x Speed of Light squared)
A lesser known formulation of his, asserted that: If you were to strip naked and run around in a circle at the speed of 298 km/sec (the speed of light) it could be possible for you to screw yourself.
If you are not physically capable of achieving that speed at your age, you can easily accomplish the same result by: simply voting Democrat in the Nov. 8, 2016 election.
What would you do with...
What would you do with ... a spare battery-powered electric drill? Here's what this guy did! Via friend and former Navy colleague Mike B.
Human version 1.1...
Human version 1.1... Via friend and former colleague Simon M.:
Hmmm... I could think of a few other bugs that needed fixing!
Hmmm... I could think of a few other bugs that needed fixing!
Paradise ponders...
Paradise ponders... While we were driving on our trip Sunday, it occurred to me that I had my priorities on getting my office in the shed completed slightly out of order. I've been working on getting the heating system working, so that it can't freeze in the office (having my computers and other electronics frozen is not a good idea!). But ... there's no frost anywhere in the forecast now, and most likely there won't be any until next winter. The shortest path to a functional shed office right now would therefore be to get the network and power rigged up.
So yesterday I put the heating system work aside for the moment, and started on the networking and power. The network had already been run to a point just outside my office, so all I had to do to complete that was to put a pair of network jacks on my office wall and run short stubs out the other side. That's now done.
Now I'm in the middle of installing power strips and wiring up circuits. Some time ago I'd located some really nice quality power strips: 4' long, all metal, a built-in 15 amp circuit breaker, and 12 three-prong outlets, each rated 15 amps individually. I bought eight of these, two for each of the walls inside my office. I'm now in the middle of installing these 24" off the floor, where they should be invisible once I have tables and workbenches installed. I'm installing them in two groups, each with four power strips plugged into a two-gang duplex outlet. Each of those will be on its own 30 amp circuit.
This will give me a very well-protected power supply for the office. Starting at the meter, there's a 150 amp main breaker, then a 50 amp sub-box breaker, a 30 amp outlet box breaker, and finally the 15 amp breaker on each power strip. If I have some sort of malfunction, one of those things had better blow!
So yesterday I put the heating system work aside for the moment, and started on the networking and power. The network had already been run to a point just outside my office, so all I had to do to complete that was to put a pair of network jacks on my office wall and run short stubs out the other side. That's now done.
Now I'm in the middle of installing power strips and wiring up circuits. Some time ago I'd located some really nice quality power strips: 4' long, all metal, a built-in 15 amp circuit breaker, and 12 three-prong outlets, each rated 15 amps individually. I bought eight of these, two for each of the walls inside my office. I'm now in the middle of installing these 24" off the floor, where they should be invisible once I have tables and workbenches installed. I'm installing them in two groups, each with four power strips plugged into a two-gang duplex outlet. Each of those will be on its own 30 amp circuit.
This will give me a very well-protected power supply for the office. Starting at the meter, there's a 150 amp main breaker, then a 50 amp sub-box breaker, a 30 amp outlet box breaker, and finally the 15 amp breaker on each power strip. If I have some sort of malfunction, one of those things had better blow!
Monday, April 25, 2016
Puppies (not quite yet) in Paradise...
Puppies (not quite yet) in Paradise... Yesterday Debbie and I made the drive from our house to the home of our breeder's sister (Debbie Miller) in Wells, Nevada. That drive was about three and a half hours each way, though it didn't seem that long to us – because the drive was beautiful! We took a “back road” route, on Utah State 30/Nevada State 223 (really the same road). I've been on this road before a few times, most recently on a trip with my dad around 2005. On that trip we were here in the summer, and the land was dry and dusty. Yesterday, on Debbie's first trip along this route, we got to see just how beautiful this country is in the spring. They'd had rain very recently, and there was still standing water in many places. The countryside was a green as photos we've all seen of Ireland, and we saw quite a bit of wildlife – most especially antelope. Lots of healthy, happy-looking antelope, some of them quite close to the road. We also saw horse, cattle, and sheep babies in abundance, along with a few early wildflowers. It was a thoroughly enjoyable drive.
When we arrived at Debbie Miller's house, we thought we'd gotten there about 20 minutes early. It turns out we neglected to take the time zone change into account, and in fact we got there an hour and 20 minutes early. Oops! Debbie Miller graciously did not throw us out on the street, and instead we had a nice visit with her while we waited for Sheila to show up with the puppies. Debbie Miller has three beautiful black field spaniels (a huge treat for us!) and a cute little beagle who looks totally overwhelmed by the (relatively) massive field spaniels. All were curious and friendly with us.
Finally, right on (the correct) time, Sheila showed up. Not only had she brought the puppies and their mom (Sissy), she'd also brought a dog we didn't even know about: Frankie the black-and-tan field spaniel. Frankie is one gorgeous dog, with all the beauty of a field spaniel combined with a two-tone “paint job”. Unfortunately Frankie came with some behavioral and training baggage, and Sheila has quite a bit of work to do to whip her into shape. On the appearance side, though, Frankie is just plain a knock out.
Sissy, the mom, reminded Debbie and I very strongly of Lea, our first field spaniel. She died about a year and a half ago, and both of us found the close resemblance in Sissy's face quite startling. Sissy is a beautiful dog herself, with a great dog personality – and she's a terrific mom, too. It was easy to see why Sheila is so closely attached to her.
But then ... the main attraction! Eight roly-poly, fat-sausage shaped, five-week-old field spaniel puppies. We had a little over three hours of non-stop puppy-infused delight. It was such good medicine for us, after losing Mo'i just two days ago. The puppies looked like the photos below for maybe 30 minutes of that time; the rest of the time was raucous puppy chaos. The video below the photos will give you some idea of what that was like :)
We still don't know if we're going to get one or two puppies from this litter, but Sheila told us it's looking a bit more likely that we can have two. Woo hoo!
When we arrived at Debbie Miller's house, we thought we'd gotten there about 20 minutes early. It turns out we neglected to take the time zone change into account, and in fact we got there an hour and 20 minutes early. Oops! Debbie Miller graciously did not throw us out on the street, and instead we had a nice visit with her while we waited for Sheila to show up with the puppies. Debbie Miller has three beautiful black field spaniels (a huge treat for us!) and a cute little beagle who looks totally overwhelmed by the (relatively) massive field spaniels. All were curious and friendly with us.
Finally, right on (the correct) time, Sheila showed up. Not only had she brought the puppies and their mom (Sissy), she'd also brought a dog we didn't even know about: Frankie the black-and-tan field spaniel. Frankie is one gorgeous dog, with all the beauty of a field spaniel combined with a two-tone “paint job”. Unfortunately Frankie came with some behavioral and training baggage, and Sheila has quite a bit of work to do to whip her into shape. On the appearance side, though, Frankie is just plain a knock out.
Sissy, the mom, reminded Debbie and I very strongly of Lea, our first field spaniel. She died about a year and a half ago, and both of us found the close resemblance in Sissy's face quite startling. Sissy is a beautiful dog herself, with a great dog personality – and she's a terrific mom, too. It was easy to see why Sheila is so closely attached to her.
But then ... the main attraction! Eight roly-poly, fat-sausage shaped, five-week-old field spaniel puppies. We had a little over three hours of non-stop puppy-infused delight. It was such good medicine for us, after losing Mo'i just two days ago. The puppies looked like the photos below for maybe 30 minutes of that time; the rest of the time was raucous puppy chaos. The video below the photos will give you some idea of what that was like :)
We still don't know if we're going to get one or two puppies from this litter, but Sheila told us it's looking a bit more likely that we can have two. Woo hoo!
Subscribe to:
Posts (Atom)



