Monday, November 16, 2015

Paradise ponders...

Paradise ponders...  Another busy day today!  First we went to see Debbie's doctor.  She's been having some pain in her knee, making it painful to walk – and to make progress in her recovery.  Tendinitis in the patella tendon was the diagnosis, and she's going to start treatment for that tomorrow.  The treatment is a steroid-infused patch for her knee, with a battery that drives the steroid from her skin into the tendon.  Amazing medical technology these days!  We're hoping for a fast cure for this latest challenge.

When we finished with the doctor's appointment, we headed out to the cabin we're buying near Newton.  Today was the final walkthrough; our last chance to voice objections before we formally take possession.  We were very pleasantly surprised – the sellers did a bang-up job cleaning up the mess that we saw on our last visit.  We found absolutely nothing to worry about.

The next step after that happened later this afternoon: the formal “closing”.  We've done this several times in California, and I did it once in Utah (for our Paradise home).  Debbie had never before seen the difference between closing in California versus closing in Utah.  The short version: California took a couple hours and something like 100 signatures.  Utah took 7 minutes and 3 signatures.  Done!  Before we went into the title company office to do the closing (they do it here, not escrow companies as in California), I wired the money to their trust account.  Three signatures and a handshake, and now we're the owners.  So easy here, and so straightforward.  The recording will happen either this afternoon or early tomorrow morning.  After that, the process is completely done!

After we got home from the closing, I went out to talk with Elray the well driller.  He worked away as we talked, and he told me he was hoping to get through a clay layer and into water-bearing sandstone shortly.  A few minutes later, he did – and by the purest luck, I was there to see it.  I stayed out with him for about an hour as he went through the process of deepening the hole into the sandstone, and backing out the drill by 25' or so to “proof” the well (testing to see if good, clear water was coming up).  He's going to be proofing the rest of the day today, and part of tomorrow, but as of now it looks like we have good water – at 321'.  If things still look good tomorrow, he's going to weld about 4 more feet of casing on top and pound it down so that the bottom of the casing is resting on top of the water-bearing sandstone.  This will keep the water as clean as possible by keeping it out of the clay layer above the sandstone.  All good!

Paradise problem puzzled!

Paradise problem puzzled!  Yesterday I posted about the clock kit I was building, and how the prescaler had a problem that needed to be troubleshot.  Well, this morning I found the problem: a bad trace on the printed circuit board.  I soldered in a jumper, about a quarter inch long, and presto!  The prescaler is now working perfectly, giving me a beautiful 1 Hz (one pulse per second) signal.  That 1 Hz signal will drive the seconds counter, which is the next part I'll be assembling.

I was surprised that it turned out to be a circuit board problem.  There must have been a tiny break in the trace, but I couldn't see it under the solder mask.  I found two components whose leads were very close together, that were supposed to be connected (but weren't), so the break had to be somewhere in the quarter inch or so between them.  That little jumper did the trick nicely.  Troubleshooting it was actually fairly easy: one component was a resistor that showed a signal on the end that was supposed to be connected to the base of a transistor.  That base showed no signal at all.  Straight wires (or circuit board traces) aren't supposed to behave like that :)  Once I observed that anomaly, finding the actual cause was easy...

Heh!

Heh!

“Why has this not been done before?”

“Why has this not been done before?”  Neoneocon asks a most pertinent question about the French bombing of Raqqa, Syria:
Why on earth was this not done earlier? Was it because everyone was hoping the crocodile would eat them last?:
The operation, carried out in coordination with U.S. forces, struck a command centre, recruitment centre for jihadists, a munitions depot and a training camp for fighters, it said. Activists inside Syria have suggested that no civilian casualties have been sustained in the Raqqa bombings.
Water supplies and electricity have reportedly been cut as a result of the air strikes, with activists claiming there has been ‘panic’ inside the city.
If that’s true, once again I ask: why has this not been done before?
I understand the answer is “lack of leadership, lack of will.” But that doesn’t completely explain it, either. Perhaps the leaders of Europe (and Obama, naturally) were, among other things, deluded into thinking that ISIS hadn’t set its sights on the West and that the carnage would remain confined to the barbaric murder of a bunch of Arabs in Arab countries: Christians, but also Muslims who didn’t quite toe the proper ISIS line. 
In addition to lack of leadership and lack of will, there's also the delusional political correctness that seems to have taken over our institutions.  It seems rather obvious that ISIS and al Qaeda are derived of Islam, and it's also true that most Muslims are not radical terrorists – but our “leaders” seem unable to recognize and accept this.  Their dumbassed adherence to politically correct views of Islam is preventing any traction on the problem.  Similarly, the oh-so-politically-correct views in Europe regarding open arms for Syrian immigrants is preventing them from getting any traction on their problem – though recent events in Paris may turn that attitude around...

A shocking development...

A shocking development...  MIT scientists have come up with a novel method for cleaning up water, including getting rid of the salt in salt water (desalination).  Their method uses shock waves to concentrate dirty water on one side of a passage, and clean on the other.  It doesn't use any membranes to get clogged, doesn't require high pressures or temperatures, and  (most importantly) is vastly more energy-efficient than any current desalination method.

This is very clever engineering, and a great example of technological innovation that defies conventional wisdom.  In this case, the assumption has long been that desalination was a high-energy process, and methods like reverse-osmosis that took less energy were complicated and high maintenance.  Here these guys come along with a method that's basically careful banging on the pipes, turning conventional wisdom on its head and out-performing every other method.  Awesome!

Sunday, November 15, 2015

Intel 4004...

Intel 4004...  This was the very first microprocessor, and it has a special place in my memory.  Today is the 44th anniversary of its announcement, on November 15, 1971.  It wasn't immediately available; in fact, it wasn't available to ordinary individuals until about 3 years later.  I don't remember the exact date, but sometime in 1974 – about 41 years ago – I bought one of these magnificent parts.  Mine looked just like the photo above, with a ceramic case and gold-plated (literally!) pins and lid.  It was an expensive part when sold at retail – over $100, as I recall.  At the same time, I bought a kit from some long-gone company.  It was a bag of parts and a schematic; the entire kit had to be wire-wrapped.  The schematic was the key bit.  I had never designed anything like a microprocessor before, and having a schematic was mighty comforting.  There was also a PROM (programmable read-only memory) with a small test program.  I put the thing together in a single evening, staying up until quite late to do it.  The “input”  was a set of four toggle switches and a momentary push button; the “output” was four LEDs.  I fired it up, and it worked – first try!  Then I spent weeks understanding what I had built, and what it could do.

After exhausting the things I could do with a 4004 (they were ... not very powerful), I then built an 8008 kit, an 8080 kit, and finally tried my own hand at designing with a Z80 board, a Motorola 6800, a Mostek 6502, and even a Motorola 68000.  Somewhere along the way I also built a bit-slice machine, 16 bits wide based on four AMD 2901s.  The 4004 launched all that learning for me, and, in a significant way, launched my career.

Happy birthday, little 4004!

Paradise ponders...

Paradise ponders...  Just finished assembling the prescaler on my clock kit (photo at right).  It doesn't work :)  That's not surprising, given that I just loaded and soldered a hundred or so parts.  I troubleshot it for a few minutes, and discovered that an “or” gate has one input permanently stuck low.  My next job will be to figure out why that should be.  It's fun to be doing electronics again, and it's even fun for me to troubleshoot.  It's been a good many years since I've troubleshot digital logic at the component level – takes me back to my days in the Navy...

Edumacayshun...

Edumacayshun...  Oh, my.  This feels distressingly on point...

Our doctor in San Diego retired earlier than he'd planned to...

Our doctor in San Diego retired earlier than he'd planned to ... and ObamaCare was a contributing factor.  Anecdotally we've heard of several other doctors doing the same thing, including one who changed careers from surgery to truck driving.  They are not alone...

Our government's ineffectiveness isn't just a recent phenomenon...

Our government's ineffectiveness isn't just a recent phenomenon...  One of the best examples I can think of to illustrate this is the fact that homeopathic “medicines” are still legally advertised and sold in the U.S.  The notions underlying these quack remedies has been thoroughly debunked.  By the 1940s, scientists and doctors knew for certain that at the very best homeopathic remedies were placebos.  There is no disease or condition that any of them can help.  We know this – and yet, the makers of homeopathic “remedies” are allowed to advertise them as effective.

Why is this?  It's a combination of corruption (the homeopathic industry dispenses a lot of money in their lobbying) and political expediency (no politician wants to tell a mom that she can't get “medicine” for her baby – even if that “medicine” is utterly worthless).

If our dysfunctional national government can't even outlaw homeopathic “remedies”, how are they going to tackle something that's actually hard, like, say, immigration?

Do it now!

Do it now!  Friend, reader, and former colleague Simon M. passes along some excellent advice.  However, I think his advice is just a wee bit too specific.  You could insert the name and photo of any of the 2016 presidential candidates and it would be just as useful...


Like a dead bug on a windshield...

Like a dead bug on a windshield...  A delightful essay on the strangeness of English.  A teaser:
Old English had the crazy genders we would expect of a good European language – but the Scandies didn’t bother with those, and so now we have none. Chalk up one of English’s weirdnesses. What’s more, the Vikings mastered only that one shred of a once-lovely conjugation system: hence the lonely third‑person singular –s, hanging on like a dead bug on a windshield. Here and in other ways, they smoothed out the hard stuff.
Do go read the whole thing!

Inquiring minds want to know...

Inquiring minds want to know...  Well, at least one inquiring mind – and even that is assuming that you believe the readers of this blog have a mind in the first place :)  A reader (who shall remain unnamed, but he knows who he is) wrote to ask:
“Where’s all the political commentary?  Your blog used to be where I went to catch up on political events!”

Well.  That's nice.  But here's the deal:

I'm teetering on the edge of completely giving up on our political leadership, especially at the national level.  Watching the sausage factory known as our Congress doesn't exactly inspire one, does it?  And the closer I watch the process and participants, the more I realize just how corrupt and ineffective Congress has become.  It's overwhelmingly corrupt and ineffective.  It's gotten to the point where the most reliable way to predict an outcome from Congress is to imagine what the most corrupt outcome would be.  To fix it would require something dramatic and, I'm afraid, unlikely.  Something like a wholesale revolution at the ballot box, exchanging the current bunch of bozos for a new group of untainted Senators and Representatives.  Or a revolution that threw them out by force.  Or some horrible event that unified the country's leadership behind a non-political cause (but even 9/11 wasn't enough for that, was it?).  Will any of that happen in my lifetime?  Most likely not.

Then there's the joke of a campaign for President in 2016.  It's hard to even imagine a more unserious collection of uninspiring, ill-prepared ego-maniacs.  Not one of these people, on either side, look to me like effective leaders.  I don't really expect to be presented with a candidate who agrees with all of my policy views, but ... every single one of these candidates has huge swathes of policy views (whether stated or inferred) that I find completely unacceptable.  There's nobody left in the race that I'd be comfortable voting for.  If some miracle occurs and the GOP successfully drafts Mitt Romney, he'll get my desperation vote – at least he looks like an effective leader.  But that doesn't seem very probable; instead, the choice seems likely to be The Hillary versus The Donald, Dr. Carson, or (maybe) Cruz or Rubio.  And my response to any of those is “What’s the point in voting?” 

Hence my teetering on the precipice.

It's not that I no longer care.  It's that I don't think any substantive change in a positive direction is likely.  That's a negative and discouraging view, and I'm by nature an optimistic fellow.  I don't get to such a negative place easily.  But I'm there...

There won't be zero political commentary here.  Occasionally I may be moved to comment despite my overall despair.  More often, you'll find my virtual comments in my Twitter stream, in the form of re-tweets.  As the 2016 election approaches, I'm sure I'll be drawn in some more – with the same sort of morbid fascination some people (not me!) have for automobile accidents and suicidal jumpers...

Saturday, November 14, 2015

Paradise ponders...

Paradise ponders...  Yesterday afternoon Debbie made stuffed peppers, using the peppers our neighbor Tim D. gave us.  Naturally, I had to try one to see how it turned out.  Excellent!


Today Elray the well driller came down, which I didn't expect at all.  Turns out he was so excited about hitting something that wasn't heaving sands that he couldn't wait until Monday to see what was next.  He doesn't work on weekends, generally speaking, so he must have been really excited about this!  Today he cleaned out the well, drilling out all that sand that had accumulated, plus he drilled 6' or so past the end of the casing, down to about 307'.  Up came clear water, running at least 20 gallons per minute.  This is very promising, and on Monday he's going to drill a bit further to get more clay between those heaving sands and a water pocket.  If all goes well in that endeavor, we should (finally!) have a working well, at around 310' deep.  Fingers crossed on that...

The solar guys were also here, and they have now finished up will all the electrical work.  The array is wired to the inverter, the inverter is working, and the tie-in to the power grid is complete.  Now we have to get an inspector out here before we can officially light it off, and in a week or so the solar guys will be back out to do the final communications (network) connections so that the solar array can be monitored.  Part of the work today was pulling 4 conductors of 4 gauge wire 275' through the conduit they laid earlier this week, and then tying that into the meter:


In between all those goings-on, I started putting my tools into those magnificent new toolboxes I bought.  It's so nice to be able to put the tools in a place where I stand a chance of finding something I need!

Friday, November 13, 2015

Paradise ponders, part II...

Paradise ponders, part II...  Well, I got to take my afternoon walk with Miki and Race.  Boy were they excited!  That first photo below shows the initial hill we walk up, with the Wasatch Mountains in the background.  In the field off to the right, past the white fence, we saw a kit fox again.  Actually, I saw a kit fox.  Our two little doggies never saw a thing :)  They were very busy with their noses to the ground, looking for voles.


It was a beautiful day for a walk!

Later this afternoon the UPS man brought the plasma cutter I've been waiting for.  I took it out to where Elray the well driller was working, as I'd promised him he could look it over when I got it.  He pronounced it a nice piece of gear :)

Today he was able to get past the “heaving sands” layer that had him stopped yesterday.  To do it, he injected foam down the well to stabilize the loose sand walls.  Then he sent the drill bit all the way down to 306', cleaning out the 100' of sand that had settled in the well.  After that, he hauled all that drill (16 sections, 20' long each) out of the well, welded another 10' of casing on top of the 300' he already had in the ground, and started pounding.  It worked!  He got through the sand layer, being temporarily held in place by the foam, and then down into a softer layer.  Most likely that's a layer of clay.  On Monday, he'll send all that drill stem back down the hole, and try drilling through the clay (or whatever it is he struck).  The hope is that below that layer is a water-bearing layer. 

Elray told me today that he had now surpassed the depth of the previously deepest well he's ever dug in the south part of Cache Valley.  He's dug plenty of wells over 1,000' deep, but none near here.  Hopefully our luck will change here, and we'll tap into some nice water...

Spawning salmon...

Spawning salmon...  My neighbor Alan L. made this video of the kokanee salmon spawning this year in Cinnamon Creek (the creek feeding Porcupine Reservoir).  He's a photographer by profession, and apparently has a Go Pro (or something like it)!

Paradise ponders...

Paradise ponders...  Well, my tool storage issues have been completely solved.  Below you can see both of the cabinets I bought: one (oak) for my woodworking tools, the other (steel) for everything else.  I'm very pleased with both of them – they're very well made, extremely heavy duty, and should last me until the end of my days.  They're also very roomy – I won't even come close to filling these things up with the tools I own today, so I'll have plenty of room for the inevitable additions I'll make along the way.


The dogs and I are going to go for a walk in just a bit.  It's a gorgeous day outside – wall-to-wall sunshine, temperature in the high 40s, crisp and slightly breezy.

Last night I assembled a “janitorial” cabinet for Debbie, down in the cattery.  It's made of particle board and melamine, so it weighed a lot – 190 pounds, to be precise.  I took it out of the boxes upstairs, then carried it down in pieces.  Much easier and safer that way!  It assembled without a hitch except for the door handles (of which there are three).  These had several problems, all related to stripped threads.  Only one handle was actually ok; one was completely unusable.  This morning I emailed the company and asked for replacement parts.  An hour later I had my answer: they were on the way!  That's very nice service, if it proves to be accurate.

Not so pleasant was my experience yesterday with my welder.  It arrived (via Fedex freight), but ... the carton had a couple of holes that looked exactly like the tines of a forklift.  The driver and I removed the carton, and there was a great big gouge and dent in the (very heavy duty) steel case of the welder.  I thought on it for a bit, then decided to refuse delivery.  That means Fedex had to send the welder back to the factory, and I had to go deal with getting a replacement.  On the latter, I called this morning and discovered that the factory will do nothing until they receive the damaged welder, at which point they will credit me back what I've paid.  Then I can reorder, starting the entire process all over again.  There's nothing they're willing to do in order to speed that up.  Sheesh.  That means I won't get the welder for about two weeks...

A short history of NTDS...

A short history of NTDS...  Some of my readers may remember that when I was in the U.S. Navy ('71-'77), I was responsible for repairing and maintaining the Naval Tactical Data System (NTDS) on the USS Long Beach.  Something I've never seen before is a history of NTDS, but this morning I stumbled across one on the Internet.

It's a short history, probably less than 20 pages if you were to print it.  The USS Long Beach gets several mentions, especially in Chapter 7, which describes some of my experiences on it.  In particular, it describes the PIRAZ role that the USS Long Beach performed off the coast of Vietnam.  That's what we did on the cruises I was part of.

This history takes on the biases of the author, as all histories do.  This particular writer is inclined to overstate the effectiveness and (especially!) the reliability of the NTDS system and its components.  One example: the author cites the Beacon Video Processor (BVP) as a critical component of NTDS.  On the three ships that I worked on (USS Long Beach, USS Enterprise, and USS Truxton), the BVP never worked and was nearly always turned off.  I made a valiant attempt to repair the BVP on the USS Long Beach, but I was stopped by the discovery that the schematics on board didn't match the machine on board – and it was far too complex a machine to attempt reverse engineering.  When we contacted a facility on base (in San Diego) to try to get schematics, we were told to shut the BVP off and forget about trying to make it work.  The author also cites the successes of the Talos missile system, which were real enough – but he left out the even more spectacular failures of Talos.  One of those I was a witness to: a Talos missile we launched turned around and flew between the forward and after superstructures on the USS Long Beach, scaring the hell out of all of us watching.

It all seems like ancient history now, but it made for fun reading for this ancient NTDS tech...

Thursday, November 12, 2015

The truth about alcohol and fats...

The truth about alcohol and fats...  Via my pistol-packing mama:


You know you're from California if...

You know you're from California if...  My cousin Mike D. passed this along:
So as not to be outdone by all the redneck, hillbilly, and West Virginia jokes, somebody had to come up with this: You know you're from California if...
  1. Your coworker has 8 body piercings and none are visible.
  2. You make over $300,000 and still can't afford a house.
  3. You take a bus and are shocked at two people carrying on a conversation in English.
  4. Your child's 3rd-grade teacher has purple hair, a nose ring, and is named Flower.
  5. You can't remember ... is pot illegal?
  6. You've been to a baby shower that has two mothers and a sperm donor.
  7. You have a very strong opinion about where your coffee beans are grown, and you can taste the difference between Sumatran and Ethiopian.
  8. You can't remember ... is pot illegal?
  9. A really great parking space can totally move you to tears.
  10. Gas costs $1.00 per gallon more than anywhere else in the U.S.
  11. Unlike back home, the guy at 8:30 am at Starbucks wearing a baseball cap and sunglasses who looks like George Clooney really IS George Clooney.
  12. Your car insurance costs as much as your house payment.
  13. You can't remember ...is pot illegal?
  14. It's barely sprinkling rain and there's a report on every news station: "STORM WATCH."
  15. You pass an elementary school playground and the children are all busy with their cells or pagers.
  16. Or It's barely sprinkling rain outside, so you leave for work an hour early to avoid all the weather-related accidents.
  17. HEY!!!! Is pot illegal????
  18. Both you AND your dog have therapists, psychics, personal trainers and cosmetic surgeons.
  19. The Terminator was your governor.
  20. If you drive illegally, they take your driver's license. If you're here illegally, they want to give you one.
Years ago I worked in Orange County, a hundred miles or so from home. I'd go up there for a few days each week, staying overnight in a local motel. In the mornings I'd go to a coffee shop right near the motel for my morning caffeine hit. The girl at the counter there was an extreme example of the first item above. I called her “metal woman” because her weight was at least half from the piercings she had. While they were nominally not visible, the bumps from them showed - easily threw the lightweight tops she wore. Braless, of course. I say "nominally not visible" because she was all too willing to show anybody those piercings. Make the slightest comment about those piercings within her hearing, and the next thing you know she's whipping out a body part that even in California isn't normally seen in a coffee shop at 5 am :)