Full, I am... And that's after just one of the three courses we were planning to have tonight! First up was the fried green tomatoes, something that (so far as I can remember) I've never had before. They were great! The flavor of the cooked green tomato was unlike anything else I can recall. The dipping sauce was outstanding – based on an apple cider reduction and mayonnaise, with a little buttermilk, BBQ sauce, herbs and spices, and scallions. It was a perfect pairing with the tomatoes. We cooked up 21 tomato slices, enough for most of northern Utah – and ate them all. Every last one.
Now I've no room for steak, nor does Debbie, so that's been put off for another meal. Debbie made a delicious lemon cake (I sampled both the cake and the icing – oh, boy!), and I'm too full to even attempt that. We'll wait a couple hours and see if we've developed enough room for dessert.
Some photos of the goodies in progress below. The first three show the tomatoes frying, dredging, and ready to eat. The last photo is that luscious cake...
Sunday, November 8, 2015
Because one can't have too many projects!
Because one can't have too many projects! A couple of weeks ago I bought one of these after reading about it on someone's web site. Along with the (for me) geekly nostalgia of an electronic clock that has no integrated circuits, this kit offered me a couple of other things. For starters, it would be an easy electronics project to ease back into something I haven't done for about 10 years. It would also give me an excuse to make a nice wooden cabinet to hold the finished product. So I bought that clock kit, and then I also had to buy a set of tools (soldering iron, pliers, nippers, etc.) because we left all my old tools in Jamul.
Today I started actually building it. You can see the results of my efforts below:
Some observations from my experience today:
Today I started actually building it. You can see the results of my efforts below:
Some observations from my experience today:
- Soldering is one of those skills that you keep even if you don't use it. Within just a couple of solder joints, I had the technique down pat again.
- My ancient and decrepit vision makes this a lot harder.
- The tools have gotten way better. The soldering iron I bought has electronic (digital) temperature control, and it works extremely well – far better than the crazy magnetic tips my old soldering iron did. I can tell with a glance at the controller whether the iron is ready to use, which is surprisingly handy (surprising because I managed without something so obviously useful!). The hand tools are also much higher quality, with perfect springs, balance, and smooth actions. The diagonal cutters slice closer to the board than any I've ever had, and I've owned some expensive “dikes” in the past.
- The components have gotten smaller. No, really, they have! The resistors in this kit are mainly 1/16th watt, which I don't remember ever seeing before. They're tiny! The diode packages are also smaller than I remember. Even the terminal block (that tiny green thing in the lower left) is smaller. One thing about the resistors and diodes really surprised me: the leads are quite flexible (because the wire is such a tiny gauge). Bending them to position on the board is far easier than the components I worked with years ago.
- This kit is superbly constructed, with directions that even someone who didn't know any electronics at all could follow.
Paradise ponders...
Paradise ponders... The dogs (Miki and Race) and I went for a walk this morning; first time in over a week. It felt great to all of us! It was a nice, crisp morning – about 35°F, fairly humid, but comfortable walking so long as I had my gloves on and didn't stop anywhere long enough for my feet to get cold :) It looks very wintry outside now – there was frost on most of the plants, and most of the deciduous trees have lost their leaves now. On the way home, a kit fox (photo at upper right is not mine, dang it!) crossed the road about 50' in front of us. What a beautiful animal! It was very perky, scampering about, no doubt searching for voles. At one point it stopped and yipped at us. Miki and Race never saw it, and didn't react to the yipping at all. The photos below are mine:
In the last photo you can see the mountain (about 40 miles northwest of us) that lies to the west of the cabin we're buying in Newton.
I wrote earlier about the canning we did yesterday, and a reader emailed wanting a photo. Here it is! Those are 12 oz. jars, jalapeno jelly on the left, green tomato pasta sauce on the right...
In the last photo you can see the mountain (about 40 miles northwest of us) that lies to the west of the cabin we're buying in Newton.
I wrote earlier about the canning we did yesterday, and a reader emailed wanting a photo. Here it is! Those are 12 oz. jars, jalapeno jelly on the left, green tomato pasta sauce on the right...
If you love dogs...
Tree vector benchmark...
Tree vector benchmark... I finally put all the pieces I've been building together (especially the red/black tree index) into a TreeVector class. This class has the same interface as two other vector classes I built: one based on native Java arrays, the other on standard Java TreeMap. Preliminary performance testing gives me the expected results: my TreeVector class outperforms the array-based class both in memory consumption and CPU consumption when the vector is relatively sparse and large. For instance, with a vector of 2000 entries with 2% of them non-zero, the TreeVector instances use about 5% as much memory and are more than 10x faster (this varies by operation, with add multiple of another vector being particularly fast). These advantages decline as the percentage of non-zero entries increases, of course. When the non-zero entries approach 50%, the memory consumption advantage disappears. The performance advantage is mostly gone when non-zero entries approach 80%.
The same building blocks I used for TreeVector (the red/black tree index and a key/value storage scheme for doubles) will also be used for two sparse matrix implementations. One of them will have a tree vector for each row; the other for each row and each column. These matrices will be convertible, one to the other, and each will have advantages in different stages of the Gaussian elimination process. The memory and CPU consumption advantages of these building blocks should be even more dramatic when I'm using them in the matrices...
The same building blocks I used for TreeVector (the red/black tree index and a key/value storage scheme for doubles) will also be used for two sparse matrix implementations. One of them will have a tree vector for each row; the other for each row and each column. These matrices will be convertible, one to the other, and each will have advantages in different stages of the Gaussian elimination process. The memory and CPU consumption advantages of these building blocks should be even more dramatic when I'm using them in the matrices...
Paradise ponders...
Paradise ponders... Debbie canned 6 pints of green tomato pasta sauce yesterday afternoon. I have no idea what that stuff will taste like, but I can tell you that it certainly looks weird, and smells ... different. Could be good, could be bad :) If it turns out to be something we like, we've got plenty!
I finished off the last of Debbie's beef stew last night for my supper. Today we're having ribeye steak (I picked up a couple of beautiful slabs of meat a few days ago). Debbie's going to make fried green tomatoes to go with them; I'll make some rice. I'm going to have to starve myself to get ready for that!
When it warms up this morning, probably around 10, I'm going to go for a walk with the dogs – the first one in over a week. It's supposed to get up to 51°F today, with clear skies – it just might be my last pleasant walk before winter sets in. I'm going to take advantage of the “heat wave” to get some outside things ready for winter. That means turning off the hose bibs, putting away the hoses and sprinklers, dismounting the backhoe from the tractor, attaching the rear weight (and filling it with gravel), and attaching the snow plow. If I have enough energy (and time), I may also move all the yard equipment (mower, sprayer, etc.) over to the outbuilding to free up space in our garage. Not exactly an exciting or fun set of chores, but it will be good to have all that done before the serious cold sets in.
I have a bunch of stuff arriving next week, adding to my list of projects. There's a set of “janitorial” cabinets coming, to add some space in the cattery for storing cleanup supplies. These are IKEA-style, knocked-down kits – the kind where the instruction manual says 30 minutes for assembly, but it really takes 4 hours :) There's a project! Then I've got some tool chests coming. Every horizontal surface in my shop is currently covered with tools, as I have zero storage for them now. The tool chests will solve that problem, with (if I've calculated correctly) plenty of leftover space for tools I acquire in the future. Finally, after Elray's welding lesson last week I decided to add a stick welder and a plasma cutter to my shop (both from Lincoln Electric). They should be arriving late next week. Once they're wired up (I'll have to pull a 220V outlet for them), I'll pick up some rods and some stock (or scrap if I can get some), and do some practice welding – especially on square tubing. I think that's going to be my “go to” raw material for metal work; nearly everything I can think of that I'd like to have could be made out of that...
I finished off the last of Debbie's beef stew last night for my supper. Today we're having ribeye steak (I picked up a couple of beautiful slabs of meat a few days ago). Debbie's going to make fried green tomatoes to go with them; I'll make some rice. I'm going to have to starve myself to get ready for that!
When it warms up this morning, probably around 10, I'm going to go for a walk with the dogs – the first one in over a week. It's supposed to get up to 51°F today, with clear skies – it just might be my last pleasant walk before winter sets in. I'm going to take advantage of the “heat wave” to get some outside things ready for winter. That means turning off the hose bibs, putting away the hoses and sprinklers, dismounting the backhoe from the tractor, attaching the rear weight (and filling it with gravel), and attaching the snow plow. If I have enough energy (and time), I may also move all the yard equipment (mower, sprayer, etc.) over to the outbuilding to free up space in our garage. Not exactly an exciting or fun set of chores, but it will be good to have all that done before the serious cold sets in.
I have a bunch of stuff arriving next week, adding to my list of projects. There's a set of “janitorial” cabinets coming, to add some space in the cattery for storing cleanup supplies. These are IKEA-style, knocked-down kits – the kind where the instruction manual says 30 minutes for assembly, but it really takes 4 hours :) There's a project! Then I've got some tool chests coming. Every horizontal surface in my shop is currently covered with tools, as I have zero storage for them now. The tool chests will solve that problem, with (if I've calculated correctly) plenty of leftover space for tools I acquire in the future. Finally, after Elray's welding lesson last week I decided to add a stick welder and a plasma cutter to my shop (both from Lincoln Electric). They should be arriving late next week. Once they're wired up (I'll have to pull a 220V outlet for them), I'll pick up some rods and some stock (or scrap if I can get some), and do some practice welding – especially on square tubing. I think that's going to be my “go to” raw material for metal work; nearly everything I can think of that I'd like to have could be made out of that...
Saturday, November 7, 2015
Jalapeno jelly and pickled beets...
Jalapeno jelly and pickled beets... Debbie and I made 9 pints of jalapeno jelly this morning, doing the whole canning thing. I'm not about to try that stuff, but Debbie (who tasted it) says it's good. I guess that means “If you like battery acid...” I cooked and diced the beets, which are delicious, then made the pickling solution, added 6 hard-boiled eggs and threw it in the refrigerator. When I came in for lunch today, that's what I had – and they were so delicious!
Most of my morning was taken up with helping Tim put up a couple hundred feet of barbed-wire fence, so that his horses can munch on the alfalfa field between our two houses (that field belongs to Tim). That means for a month or so we'll have two horses hanging their heads over our backyard fence – Debbie's gonna love that! Then I took my tractor over to Tim's and we finished up the Great Water Line Replacement Project. It's now officially all done until next spring. When some of the wetter soil dries out then, I'll come over and help him level those parts (where the leak was) mo' bettah.
Tim sent me home with two quarts of perfectly ripe cherry tomatoes. Oh, boy!
Most of my morning was taken up with helping Tim put up a couple hundred feet of barbed-wire fence, so that his horses can munch on the alfalfa field between our two houses (that field belongs to Tim). That means for a month or so we'll have two horses hanging their heads over our backyard fence – Debbie's gonna love that! Then I took my tractor over to Tim's and we finished up the Great Water Line Replacement Project. It's now officially all done until next spring. When some of the wetter soil dries out then, I'll come over and help him level those parts (where the leak was) mo' bettah.
Tim sent me home with two quarts of perfectly ripe cherry tomatoes. Oh, boy!
Assembly language will never die!
Assembly language will never die! When I started computer programming, assembly language seemed like a high level language to me – because I started by hand-encoding the actual machine language. As a computer repair technician in the U.S. Navy, there was no reason to spend the (large) amounts of money that would have been required to give me access to programming tools. Actually, nobody ever told me those tools even existed; I'd been programming for 5 or 6 years before I found that out!
As the years have gone by, higher level languages (C, C++, Java, etc.) have become the norm. Partly this is because computers have gotten so much more powerful that the inefficiencies of those languages (compared to machine or assembly language) don't matter as much. Mostly it's because the productivity of programmers is so much higher when using a high level language. These days it's gotten to the point where it's common for programmers to never have learned assembly language at all. And many programmers, having no experience with it, have no idea why anyone would ever use it. I've had quite a few conversations with programmers like this over the past ten years or so, trying to help them understand why assembly language was still useful, even if it's only occasionally. I've also tried to convince them (usually without success) that they'd understand computers a whole lot better if they knew assembly language. This article does a much better job than I did. I'll be sending this to some friends :)
As the years have gone by, higher level languages (C, C++, Java, etc.) have become the norm. Partly this is because computers have gotten so much more powerful that the inefficiencies of those languages (compared to machine or assembly language) don't matter as much. Mostly it's because the productivity of programmers is so much higher when using a high level language. These days it's gotten to the point where it's common for programmers to never have learned assembly language at all. And many programmers, having no experience with it, have no idea why anyone would ever use it. I've had quite a few conversations with programmers like this over the past ten years or so, trying to help them understand why assembly language was still useful, even if it's only occasionally. I've also tried to convince them (usually without success) that they'd understand computers a whole lot better if they knew assembly language. This article does a much better job than I did. I'll be sending this to some friends :)
Compound 29...
Compound 29... Scientists have found a chemical that promises to reverse cataracts when used in eye drops. This could mean the end of cataract surgery, and the simple treatment of cataracts not only in people, but in dogs and other animals. Faster, please!
Paradise ponders...
Paradise ponders... Well, the beets are on the stove and shortly we'll have pickled beets going into jars. Debbie is preparing to make vast quantities of green tomato pasta sauce. I have no idea what that's going to taste like, but we're going to find out! She's also reserving some for fried green tomatoes. Later she'll be making several quarts of jalapeno jelly. In a few days, when the bell peppers get ripe, she's going to make stuffed peppers that we can freeze. Tim's vegetables set off an explosion in the kitchen!
Yesterday afternoon I had a bit of a surprise when I walked through the front door and into our kitchen. The back door (from the kitchen to our back yard) was wide open, and frigid air was pouring in. Miki and Race were over by our peninsula counter, looking up. When I looked there, I saw a bit gray-and-white cat, looking scared. I moved toward it, and it darted out through the back door and took off like a shot. When I went to the back door to see where it went, I spotted a skunk – about 8' from the open door, and moving toward it. Yikes! I tried waving my hands and stepping toward the skunk. Usually that doesn't work with skunks; they're arrogant assholes that are most likely reincarnated Democrats. This time, though, it worked – the skunk took off to the northwest, like the cat. Sheesh. We think the dogs may have opened the back door (which has a lever handle) because they were excited about the skunk. We're just lucky they didn't go out to investigate it – and even luckier the darned thing didn't come into the kitchen. Wouldn't that have been fun! No, wait a minute ... the complete opposite of that.
Then later we were driving around looking for Booker (a poor little abused puppy that Tim's granddaughter Randi is trying to rehabilitate). He'd gotten loose and run away the night before, and hasn't been seen since. We stopped at our neighbor's house (Alan and Nikki L.) to ask if they'd seen it, and they told us they'd lost a dog they were dog-sitting. After hearing the description, we realized it was little Rocky Road! It turns out that Nikki's sister is the family that Emberly gave Rocky to, and Nikki was dog-sitting for her sister while she was in California! So we got Nikki in touch with Emberly, and hopefully Nikki got Rocky back.
Yesterday afternoon I had a bit of a surprise when I walked through the front door and into our kitchen. The back door (from the kitchen to our back yard) was wide open, and frigid air was pouring in. Miki and Race were over by our peninsula counter, looking up. When I looked there, I saw a bit gray-and-white cat, looking scared. I moved toward it, and it darted out through the back door and took off like a shot. When I went to the back door to see where it went, I spotted a skunk – about 8' from the open door, and moving toward it. Yikes! I tried waving my hands and stepping toward the skunk. Usually that doesn't work with skunks; they're arrogant assholes that are most likely reincarnated Democrats. This time, though, it worked – the skunk took off to the northwest, like the cat. Sheesh. We think the dogs may have opened the back door (which has a lever handle) because they were excited about the skunk. We're just lucky they didn't go out to investigate it – and even luckier the darned thing didn't come into the kitchen. Wouldn't that have been fun! No, wait a minute ... the complete opposite of that.
Then later we were driving around looking for Booker (a poor little abused puppy that Tim's granddaughter Randi is trying to rehabilitate). He'd gotten loose and run away the night before, and hasn't been seen since. We stopped at our neighbor's house (Alan and Nikki L.) to ask if they'd seen it, and they told us they'd lost a dog they were dog-sitting. After hearing the description, we realized it was little Rocky Road! It turns out that Nikki's sister is the family that Emberly gave Rocky to, and Nikki was dog-sitting for her sister while she was in California! So we got Nikki in touch with Emberly, and hopefully Nikki got Rocky back.
Friday, November 6, 2015
Vegetables, vegetables, vegetables!
Vegetables, vegetables, vegetables! Our friend and neighbor Tim D. was madly taking all the above-ground vegetables out of his garden today, as we had a good hard frost last night. He brought over about two gallons of green tomatoes (which Debbie's going to make fried green tomatoes and some tomato relish from), a dozen or so gigantic bell peppers, and three pounds (!) of jalapeno peppers, which Debbie's going to turn into jalapeno jelly that I won't go anywhere near. He also brought over a lovely batch of beets (and he still has a lot more). I cleaned and skinned them this afternoon, resulting in the bowl you see at right (I like this method better than boiling them with the skin still on, as skinning them takes away all the grit). Later today I'll boil them up and make about two quarts of pickled beets. I'll throw a few hard-boiled eggs in as well. Yum!
Paradise ponders...
Paradise ponders... Debbie and I were looking out the glass door to our bedroom a few minutes ago, watching the snow fall (first “real” snow this year, though it's not sticking to the ground). Suddenly Debbie said “There’s a Schnauzer in our yard!” A little black miniature Schnauzer, to be precise. I went out and called him to me, and he came right over. Didn't have any name tag, but he did have a rabies tag – and it had the name of the vet and an ID number. I called the vet and got the number of the owner, along with the name of the dog (“Rocky Road”).
I called the owner and discovered that they had given little Rocky away years ago to a family who lived on the south side of Hyrum. That's almost four miles north of our house – if little Rocky wandered that far, then he's an accomplished traveler indeed! The original owners (Branden and Emberly H.) drove down to our house right away, picked up little Rocky (who quite obviously recognized them), and set off on a quest to reunite him with the family they gave him to. About a half hour after we found him, Rocky was on the way back home. A happy ending!
I called the owner and discovered that they had given little Rocky away years ago to a family who lived on the south side of Hyrum. That's almost four miles north of our house – if little Rocky wandered that far, then he's an accomplished traveler indeed! The original owners (Branden and Emberly H.) drove down to our house right away, picked up little Rocky (who quite obviously recognized them), and set off on a quest to reunite him with the family they gave him to. About a half hour after we found him, Rocky was on the way back home. A happy ending!
Technology in Paradise...
Technology in Paradise... So Debbie and I finally upgraded our iPhones yesterday. Both of us moved from from an iPhone 5 (purchased over 3 years ago) to an iPhone 6s+ – a fairly large jump in technology, as well as in size. In the photo at right (not mine), that's a 6s+ on the right and a 5 on the left. We bought the new phones straight from Apple as “SIM-less” versions, and I did the upgrade myself: just backed up the old ones, swapped the SIM cards, and restored the new one. It was tedious re-entering all the settings and passwords, but I had no problems with either one. I don't think it took even one hour to have us both up and running in the new phones.
First reactions:
First reactions:
- Holy crap these things are HUGE! Even though we looked at them in the store, I wasn't quite mentally prepared for this. It's like carrying around a junior-sized iPad.
- The screens are almost unbelievably crisp, clear, and beautiful. Not to mention ever-so-much easier to read for our ancient peepers.
- The camera with its stabilizer is a lot better than the iPhone 5's camera. A whole lot better, most especially for video.
- I'm surprised how much easier the keyboard is to use, basically because of the size (and my fat fingers).
- The curved edges make the new phone much more comfortable to hold. Me like.
- The fingerprint reader is much more of a convenience than I'd have thought. The simple fact that I can wake up my iPhone with just a simple click with my forefinger is surprisingly liberating – no more typing in that pesky 6 digit PIN. Also convenient: we could set up our phones to accept the fingerprint from either of us, so we can easily use each other's phones. Awesome.
- Debbie loves the “rose gold” case on hers. Mine is “space gray”, otherwise known as “battleship gray”, and suits me just fine.
Headline: “Most women aren’t straight.”
Headline: “Most women aren’t straight.” My first thought: “Of course not! They’re curvy!” – but that wasn't what the article meant...
Software is made of decisions...
Software is made of decisions... A good little essay aimed at helping non-programmers understand what it is that programmers do. I've struggled to try to communicate this to non-programmers I know, without much success. This essay does a much better job :)
One caveat: some particular types of programming really are not made of decisions. For instance, writing the software that allows simple computers to multiply and divide isn't. However, relatively few programmers ever write software like that. The vast majority are writing software that does fit the description given by that essay...
One caveat: some particular types of programming really are not made of decisions. For instance, writing the software that allows simple computers to multiply and divide isn't. However, relatively few programmers ever write software like that. The vast majority are writing software that does fit the description given by that essay...
Thursday, November 5, 2015
Paradise ponders...
Paradise ponders... Tim and I decided to put off the finishing touches on his new water line until Saturday, when the weather is supposed to improve considerably. We did a few things this morning to make sure his new water line won't freeze tonight (we're supposed to get down into the low 20s), and then called it a day.
I wandered over to see Elray the well driller, and found him with a big smile on his face. He thinks that he's hit good water, with the drill now sitting on the top of what he hopes is a nice thick layer of gravel filled with water. He's bringing up hundreds of gallons of ground water right where the drill is now, at 258 feet down. He's going to pound the casing down another 40 feet, to the bottom of the existing hole, then go down another 10 to 20 feet to see if he can get in the middle of the gravel layer he's hypothesizing is there.
It's interesting to see how Elray judges his progress. He uses a combination of things, including how the water tastes, how the gas exhausting from the well smells, the color of the stuff coming up (a kind of slurry of soil mixed with groundwater), and the debris carried up with the groundwater. From all of this, he gathers a good idea of what he's going through. From having drilled hundreds of wells in the general area, he carries around – in his head – a pretty good picture of the underground geology. All of this he mushes around in his head to come up with a clear picture of what's happening over 200' under his boots. Me, I'd have no clue at all – it would just be random-looking stuff coming up out of the well, and I'd have absolutely no idea what was going to happen next!
I wandered over to see Elray the well driller, and found him with a big smile on his face. He thinks that he's hit good water, with the drill now sitting on the top of what he hopes is a nice thick layer of gravel filled with water. He's bringing up hundreds of gallons of ground water right where the drill is now, at 258 feet down. He's going to pound the casing down another 40 feet, to the bottom of the existing hole, then go down another 10 to 20 feet to see if he can get in the middle of the gravel layer he's hypothesizing is there.
It's interesting to see how Elray judges his progress. He uses a combination of things, including how the water tastes, how the gas exhausting from the well smells, the color of the stuff coming up (a kind of slurry of soil mixed with groundwater), and the debris carried up with the groundwater. From all of this, he gathers a good idea of what he's going through. From having drilled hundreds of wells in the general area, he carries around – in his head – a pretty good picture of the underground geology. All of this he mushes around in his head to come up with a clear picture of what's happening over 200' under his boots. Me, I'd have no clue at all – it would just be random-looking stuff coming up out of the well, and I'd have absolutely no idea what was going to happen next!
Norway, then and now...
Norway, then and now... Fascinating set of photo pairs showing locations in Norway many years ago vs. today...
Wednesday, November 4, 2015
Even more Paradise ponders...
Even more Paradise ponders... Just a quick one – I've been working with Tim all day, and this old lad is tired! Tim's trench is completely backfilled, but we haven't quite completed the cleanup work (that's made especially challenging as the entire length of the trench is through lawn, and we're trying to preserve the sod). This afternoon, just when we thought the end was in sight, we discovered that we'd accidentally buried a wire that needs to be repaired. That's shovel work to fix it, and once it dawned on us what we'd done, Tim looked at me and said “Tomorrow. Let’s do it tomorrow!” And who was I to object?
We worked hard today, both of us. Lots of shovel work and sod-carrying. We had an especially nice break in the middle of the day, though: Debbie drove into Tim's driveway with a tray full of homemade beef stew and just-out-of-the-oven cookies (oatmeal chocolate chip, with cranberries and orange peel). The beef stew was piping hot and absolutely delicious – and for two old farts working out in the cold all morning, it's really hard to imagine what could have been better. The look on Tim's face when he realized what Debbie had done was priceless :)
Now this ancient and very tired one is headed for bed...
We worked hard today, both of us. Lots of shovel work and sod-carrying. We had an especially nice break in the middle of the day, though: Debbie drove into Tim's driveway with a tray full of homemade beef stew and just-out-of-the-oven cookies (oatmeal chocolate chip, with cranberries and orange peel). The beef stew was piping hot and absolutely delicious – and for two old farts working out in the cold all morning, it's really hard to imagine what could have been better. The look on Tim's face when he realized what Debbie had done was priceless :)
Now this ancient and very tired one is headed for bed...
Paradise ponders...
Paradise ponders... Yesterday was a day of rest for me. Mostly, anyway. It was nasty outside: cold (40s), windy, and intermittently raining. Did a few chores around the house, then Debbie and I had a nice lunch (as always) at Jack's. We had a weird-sounding pizza that was actually quite delicious (a specialty there!): prosciutto, slices of pear, rosemary, honey Dijon mustard, fresh mozzarella, and no tomato sauce. The soup we had first was also great: chicken mushroom with a cheesy, buttery broth. Evil, but great :) After that we went grocery shopping, for today Debbie is cooking vast quantities of food: an Amish beef stew, her signature chili, and oatmeal chocolate chip orange cookies. I'm gonna gain 15 pounds this week! The stew is sort of a normal quantity, if you had a family of 12 or so. The chili, though, she's making on an industrial scale. Some time ago I bought her a beautiful stainless steel soup pan that looks basically like the bottom half of a 55 gallon drum. That thing is now sitting on our stove bubbling away. When it's finished, she'll be packing up the bulk of it in freezer containers, and we will fill our chest freezer in the garage. Those containers will come out on nice, cold winter days when chili sounds perfect for a fast, easy meal.
Later yesterday afternoon I wandered out to see Elray the well driller. He was welding on a 20' piece of 6" steel casing so he could pound casing down to 200' in preparation for the next 20' of drilling (that will likely be today). I'd mentioned before to Elray that I had no idea how to weld, and he said he'd bring an extra hood and show me. He was as good as his word – broke out a few scraps, a few rods, fired up his welder, gave us each a hood, and then he set out to give me a few lessons. We didn't spend even a half hour at it, but by the end, thanks to his teaching, I actually made a weld that looked like it might hold. A bit more practice, and I could weld two pipes together. Best of all, I can see that with just a bit more practice, I could do some simple welding on my own. That's a darn handy thing to know how to do, so that's now on my list. Now I have to find myself a decent beginner's welder...
Today as soon as it's warmed up just a tad, I'll be heading over to Tim's place with my tractor to backfill the lovely ditch we dug together. We need to get that done before we have a hard frost, else his brandy-new water line will freeze and crack. That would be bad!
Later yesterday afternoon I wandered out to see Elray the well driller. He was welding on a 20' piece of 6" steel casing so he could pound casing down to 200' in preparation for the next 20' of drilling (that will likely be today). I'd mentioned before to Elray that I had no idea how to weld, and he said he'd bring an extra hood and show me. He was as good as his word – broke out a few scraps, a few rods, fired up his welder, gave us each a hood, and then he set out to give me a few lessons. We didn't spend even a half hour at it, but by the end, thanks to his teaching, I actually made a weld that looked like it might hold. A bit more practice, and I could weld two pipes together. Best of all, I can see that with just a bit more practice, I could do some simple welding on my own. That's a darn handy thing to know how to do, so that's now on my list. Now I have to find myself a decent beginner's welder...
Today as soon as it's warmed up just a tad, I'll be heading over to Tim's place with my tractor to backfill the lovely ditch we dug together. We need to get that done before we have a hard frost, else his brandy-new water line will freeze and crack. That would be bad!
Subscribe to:
Posts (Atom)


