Paradise ponders... Tim and I decided to put off the finishing touches on his new water line until Saturday, when the weather is supposed to improve considerably. We did a few things this morning to make sure his new water line won't freeze tonight (we're supposed to get down into the low 20s), and then called it a day.
I wandered over to see Elray the well driller, and found him with a big smile on his face. He thinks that he's hit good water, with the drill now sitting on the top of what he hopes is a nice thick layer of gravel filled with water. He's bringing up hundreds of gallons of ground water right where the drill is now, at 258 feet down. He's going to pound the casing down another 40 feet, to the bottom of the existing hole, then go down another 10 to 20 feet to see if he can get in the middle of the gravel layer he's hypothesizing is there.
It's interesting to see how Elray judges his progress. He uses a combination of things, including how the water tastes, how the gas exhausting from the well smells, the color of the stuff coming up (a kind of slurry of soil mixed with groundwater), and the debris carried up with the groundwater. From all of this, he gathers a good idea of what he's going through. From having drilled hundreds of wells in the general area, he carries around – in his head – a pretty good picture of the underground geology. All of this he mushes around in his head to come up with a clear picture of what's happening over 200' under his boots. Me, I'd have no clue at all – it would just be random-looking stuff coming up out of the well, and I'd have absolutely no idea what was going to happen next!
Thursday, November 5, 2015
Norway, then and now...
Norway, then and now... Fascinating set of photo pairs showing locations in Norway many years ago vs. today...
Wednesday, November 4, 2015
Even more Paradise ponders...
Even more Paradise ponders... Just a quick one – I've been working with Tim all day, and this old lad is tired! Tim's trench is completely backfilled, but we haven't quite completed the cleanup work (that's made especially challenging as the entire length of the trench is through lawn, and we're trying to preserve the sod). This afternoon, just when we thought the end was in sight, we discovered that we'd accidentally buried a wire that needs to be repaired. That's shovel work to fix it, and once it dawned on us what we'd done, Tim looked at me and said “Tomorrow. Let’s do it tomorrow!” And who was I to object?
We worked hard today, both of us. Lots of shovel work and sod-carrying. We had an especially nice break in the middle of the day, though: Debbie drove into Tim's driveway with a tray full of homemade beef stew and just-out-of-the-oven cookies (oatmeal chocolate chip, with cranberries and orange peel). The beef stew was piping hot and absolutely delicious – and for two old farts working out in the cold all morning, it's really hard to imagine what could have been better. The look on Tim's face when he realized what Debbie had done was priceless :)
Now this ancient and very tired one is headed for bed...
We worked hard today, both of us. Lots of shovel work and sod-carrying. We had an especially nice break in the middle of the day, though: Debbie drove into Tim's driveway with a tray full of homemade beef stew and just-out-of-the-oven cookies (oatmeal chocolate chip, with cranberries and orange peel). The beef stew was piping hot and absolutely delicious – and for two old farts working out in the cold all morning, it's really hard to imagine what could have been better. The look on Tim's face when he realized what Debbie had done was priceless :)
Now this ancient and very tired one is headed for bed...
Paradise ponders...
Paradise ponders... Yesterday was a day of rest for me. Mostly, anyway. It was nasty outside: cold (40s), windy, and intermittently raining. Did a few chores around the house, then Debbie and I had a nice lunch (as always) at Jack's. We had a weird-sounding pizza that was actually quite delicious (a specialty there!): prosciutto, slices of pear, rosemary, honey Dijon mustard, fresh mozzarella, and no tomato sauce. The soup we had first was also great: chicken mushroom with a cheesy, buttery broth. Evil, but great :) After that we went grocery shopping, for today Debbie is cooking vast quantities of food: an Amish beef stew, her signature chili, and oatmeal chocolate chip orange cookies. I'm gonna gain 15 pounds this week! The stew is sort of a normal quantity, if you had a family of 12 or so. The chili, though, she's making on an industrial scale. Some time ago I bought her a beautiful stainless steel soup pan that looks basically like the bottom half of a 55 gallon drum. That thing is now sitting on our stove bubbling away. When it's finished, she'll be packing up the bulk of it in freezer containers, and we will fill our chest freezer in the garage. Those containers will come out on nice, cold winter days when chili sounds perfect for a fast, easy meal.
Later yesterday afternoon I wandered out to see Elray the well driller. He was welding on a 20' piece of 6" steel casing so he could pound casing down to 200' in preparation for the next 20' of drilling (that will likely be today). I'd mentioned before to Elray that I had no idea how to weld, and he said he'd bring an extra hood and show me. He was as good as his word – broke out a few scraps, a few rods, fired up his welder, gave us each a hood, and then he set out to give me a few lessons. We didn't spend even a half hour at it, but by the end, thanks to his teaching, I actually made a weld that looked like it might hold. A bit more practice, and I could weld two pipes together. Best of all, I can see that with just a bit more practice, I could do some simple welding on my own. That's a darn handy thing to know how to do, so that's now on my list. Now I have to find myself a decent beginner's welder...
Today as soon as it's warmed up just a tad, I'll be heading over to Tim's place with my tractor to backfill the lovely ditch we dug together. We need to get that done before we have a hard frost, else his brandy-new water line will freeze and crack. That would be bad!
Later yesterday afternoon I wandered out to see Elray the well driller. He was welding on a 20' piece of 6" steel casing so he could pound casing down to 200' in preparation for the next 20' of drilling (that will likely be today). I'd mentioned before to Elray that I had no idea how to weld, and he said he'd bring an extra hood and show me. He was as good as his word – broke out a few scraps, a few rods, fired up his welder, gave us each a hood, and then he set out to give me a few lessons. We didn't spend even a half hour at it, but by the end, thanks to his teaching, I actually made a weld that looked like it might hold. A bit more practice, and I could weld two pipes together. Best of all, I can see that with just a bit more practice, I could do some simple welding on my own. That's a darn handy thing to know how to do, so that's now on my list. Now I have to find myself a decent beginner's welder...
Today as soon as it's warmed up just a tad, I'll be heading over to Tim's place with my tractor to backfill the lovely ditch we dug together. We need to get that done before we have a hard frost, else his brandy-new water line will freeze and crack. That would be bad!
Tuesday, November 3, 2015
Pouring rain, it is...
Pouring rain, it is... And I am very glad that Tim and I managed to get the trenching finished yesterday!
Why I love the Daily Shot, part 3,821...
Why I love the Daily Shot, part 3,821: today's edition has this gem on the budget “deal” Obama just signed:
So what does this new deal do? First of all, it lifts those pesky caps from the 2011 Budget Control Act that everybody in Washington hated (mostly because they worked really well to control spending). The deal is for two years, which means there won’t be any uncomfortable discussions next year about how much the government is spending, and no “crisis” over a shutdown right before the election. Also, the debt limit is suspended until March 16, 2017, so it won’t be an issue next year either. Basically, everybody wins. (Unless, you know, you’re a taxpayer, then you’re kind of getting the shaft.)Subscribe here (free), and consider subscribing to Ricochet (almost free)...
Obama said Monday that this deal “puts us on a responsible path.” Let’s see if we’ve got all this: Last-minute deal, worked out behind closed doors, under threat of a shutdown, unbalanced budget, deficit in the hundreds of billions, scheduling things to avoid public debate in an election year, removing the only thing limiting spending, and eliminating the debt ceiling. Yep. Seems like a “responsible path” to us.
Oh no, wait, the complete opposite of that.
Pluto is weird!
Pluto is weird! Another strange-looking closeup view of Pluto's surface downlinked from the New Horizons spacecraft (click to embiggen it and see the strange landscapes)...
Monday, November 2, 2015
Paradise ponders...
Paradise ponders... I spent the day at my neighbor Tim's house. We finished off the trench for his new water line today, and now he's ready for the plumber – who's showing up tomorrow morning to connect it all up. We didn't expect to be able to work today, as the forecast was for some substantial rain – but late last night something changed, and the weather front meandered off in another direction. On Wednesday, weather permitting, we'll be filling his trenches back in.
There was no excitement today like we had on Saturday. We didn't break any more pipes or yank out any more wires :) It was just a pleasant day, with the two of us working together very smoothly. There were a couple of challenging spots, where we had to do a bit of hand digging. As soon as you get more than about 18" deep in his yard, there are fist-sized rocks with a little dirt in between them. We had to go 4' deep to get below the frost line, and whenever we were near a pipe, we had to dig it by hand the whole way. But we got it done, and it's a satisfying feeling to have done so.
But now I'm tired :)
There was no excitement today like we had on Saturday. We didn't break any more pipes or yank out any more wires :) It was just a pleasant day, with the two of us working together very smoothly. There were a couple of challenging spots, where we had to do a bit of hand digging. As soon as you get more than about 18" deep in his yard, there are fist-sized rocks with a little dirt in between them. We had to go 4' deep to get below the frost line, and whenever we were near a pipe, we had to dig it by hand the whole way. But we got it done, and it's a satisfying feeling to have done so.
But now I'm tired :)
Healthcare premiums...
Healthcare premiums... Well, we finally got our renewal notice for our Obamacare policy, and seen from a really perverse perspective, it's kind of good news. What do I mean by that? Well, we'd been told that our premiums were likely to go up by 50% or more for 2016, and instead they're “only” going up 23.5%. Woo hoo! ...he says, while raging at the stupidity.
According to this article, our increase is in line with the national average. Small comfort, that – our suffering is no worse than anyone else's. But that's only true when you look at it in relative terms. In absolute terms, our premiums are going up by almost $300 a month! Of course what's really going on is that we're involuntarily subsidizing (through our higher premiums) the lower premiums of other people. That's socialism, plain and simple, though the progressives like to deny that. Margaret Thatcher famously said “The problem with socialism is that you eventually run out of other people's money.” Judging from the people around here, you could add to that: “…and those other people are armed!” It just might be the case that socialized healthcare (aka Obamacare) is the provocation for America's next revolution. I don't know any other issue that so unites Red State Americans...
According to this article, our increase is in line with the national average. Small comfort, that – our suffering is no worse than anyone else's. But that's only true when you look at it in relative terms. In absolute terms, our premiums are going up by almost $300 a month! Of course what's really going on is that we're involuntarily subsidizing (through our higher premiums) the lower premiums of other people. That's socialism, plain and simple, though the progressives like to deny that. Margaret Thatcher famously said “The problem with socialism is that you eventually run out of other people's money.” Judging from the people around here, you could add to that: “…and those other people are armed!” It just might be the case that socialized healthcare (aka Obamacare) is the provocation for America's next revolution. I don't know any other issue that so unites Red State Americans...
Sunday, November 1, 2015
Paradise ponders...
Paradise ponders... Yesterday we had a long day of trenching, Tim and I. We made great progress up until about 2 pm, when progress came to a sudden halt. Then things got way more exciting than you'd expect from trenching!
What, you may wonder, could possibly happen to make digging a trench exciting? Why it's very easy! One merely needs to break a 60 psi gas line – that's all it takes!
That's exactly what we did, even though we did all the right things to avoid doing so. Tim had had the “blue stakes” folks out to mark where all the electric lines and gas lines were, and we had a nice yellow line painted right across his lawn to show us exactly where that gas line was. Right where we needed to cross the gas line with the ditch for Tim's new water line, his son Jeff hand-dug a hole down to find the gas line. He got down to three and a half feet without spotting it, but then could did no more. So we decided to (very carefully!) dig a larger adjoining hole about two feet deep, safely off to one side of Jeff's hole, so that Jeff could stand in that to dig deeper in his hand-dug hole. On the second backhoe scoop in that effort, I snagged the gas line and snapped it. The darned thing was way off to the side from that painted line!
When all the excitement died down later, we measured that distance and discovered that it was 25" from the line to where the pipe actually was. That's far enough away that the gas company decided this wasn't our fault, and they're not going to charge Tim for the resulting brouhaha. What brouhaha? Well...
Right after I snapped the line, I shut the tractor down (not wanting any possibility of igniting the escaping gas). There were several people right there, and one went off to call the gas company, another called the fire company, and together with another of Tim's sons I tried to figure out a way to stop up that gas line. We failed in all our attempts: that plastic pipe was so tough that we couldn't squeeze it with any tool we could find, nor could we find anything that would stop it up. That break was loud – something like standing right next to a jet engine that was running. When we were trying (very carefully, trust me!) to stop it up, we could scarcely hear ourselves think. Finally, as the cavalry arrived, we gave up on that effort. Within a few minutes of those calls, we had firemen (in two pumpers and several auxiliary vehicles) in the yard, a paramedic, two sheriffs, and several gas company employees. That wasn't the full extent of it, either – four other fire trucks and numerous firemen visited all the houses within an 800 meter (about a half mile) radius of Tim's house and evacuated all those people, too!
The second photo below shows some of the people who were in Tim's house, which got evacuated while the break was still going. Tim himself is off to the right, making a face for the camera. The girl in pink is his granddaughter Randi (wouldn't the Brits get a kick out of that name?!?), who was in her Halloween costume. The border collie mix to the left of her in the photo is Booker, an abused puppy (eight months old) whom she's working to rehabilitate. The poor thing is terrified of any stranger who happens by. The little white dog is Lexie, one of Tim's two beloved companions.
This was substantial overkill for the actual problem, but all the responders were following a documented protocol they have for gas leaks (literally reading it from a manual). Actual facts on the ground and common sense are, naturally, not part of the equation :) We had light west winds at the time, blowing the escaping gas to the east – where there was nothing but miles of rolling hay and barley fields, and the foothills of the Wasatch Mountains. Natural gas is lighter than air, so the escaping gas was over everyone's heads within a few feet of the break. The odorant that's in the gas is heavier than air, though, so it stays near the ground. So the only actually dangerous thing around was right at the break itself, where a spark could have caused a big plume of burning gas.
The gas company employee who first responded was a fellow named John who I knew, because he was one of the guys who helped hook up the gas to my shed last fall. He recognized my tractor (which he and several of the firemen really like :), so he knew I was there somewhere. John grabbed a shovel and started digging a hole about 15' upstream of the break. It took him over an hour to find the pipe, because (as we discovered) it was nowhere near the marked line. Once he'd exposed the pipe, he used a clamping device – much like a gigantic set of vise-grips – to squeeze the pipe and close it off. Just like that, the noise stopped and the firemen, police, paramedics, and all the other assorted people took off. Within a couple of minutes it was just us and John.
Then a few minutes later, another gas company employee showed up. He (Nick) was another of the crew who hooked up my barn last fall, and one that I was particularly friendly with. He and John went to work to repair the break, and in the process gave us a running commentary on how their patch worked (a very clever bit of engineering, that), just how common these breaks are (several of them every day just in Cache Valley), and how that line was way, way off the mark. That last thing really surprised us, as we thought the painted line came from actual detection of the pipe underground. That's certainly how it worked when the Blue Stakes folks marked the gas lines around my house last year, and their lines were within an inch or two of where the pipe actually was. But Nick told us that if the pipe was installed before 1974 (which Tim's was, and mine wasn't), then the pipe would not have a wire running along it. The Blue Stakes guys therefore have no way to actually detect it. So how did they decide where to paint the line? They did it by looking at drawings made by the gas crew that installed the line, and measuring. No wonder there was an error! There's no way to know how accurately the actual installation followed the drawing, plus there's plenty of room for error in how the Blue Stakes folks measured. Tim and I felt much better about our own actions after learning how far off the line was, and that it wasn't detected in the first place. It would have been very nice to have been informed about this, which we made clear to a Blue Stakes representative who was on site.
Well, after all that it was getting on toward dark, and Tim and I were pretty darned tired. So we wrapped up for the day, installing a tarp over the hole around the well casing (as we're expecting several days of rain), cleaning up the tools, etc. It was good to have some routine, calm time after the preceding several hours of pure chaos :)
I'm still tired this morning, but I can tell I'll be all right by tomorrow...
What, you may wonder, could possibly happen to make digging a trench exciting? Why it's very easy! One merely needs to break a 60 psi gas line – that's all it takes!
That's exactly what we did, even though we did all the right things to avoid doing so. Tim had had the “blue stakes” folks out to mark where all the electric lines and gas lines were, and we had a nice yellow line painted right across his lawn to show us exactly where that gas line was. Right where we needed to cross the gas line with the ditch for Tim's new water line, his son Jeff hand-dug a hole down to find the gas line. He got down to three and a half feet without spotting it, but then could did no more. So we decided to (very carefully!) dig a larger adjoining hole about two feet deep, safely off to one side of Jeff's hole, so that Jeff could stand in that to dig deeper in his hand-dug hole. On the second backhoe scoop in that effort, I snagged the gas line and snapped it. The darned thing was way off to the side from that painted line!
When all the excitement died down later, we measured that distance and discovered that it was 25" from the line to where the pipe actually was. That's far enough away that the gas company decided this wasn't our fault, and they're not going to charge Tim for the resulting brouhaha. What brouhaha? Well...
Right after I snapped the line, I shut the tractor down (not wanting any possibility of igniting the escaping gas). There were several people right there, and one went off to call the gas company, another called the fire company, and together with another of Tim's sons I tried to figure out a way to stop up that gas line. We failed in all our attempts: that plastic pipe was so tough that we couldn't squeeze it with any tool we could find, nor could we find anything that would stop it up. That break was loud – something like standing right next to a jet engine that was running. When we were trying (very carefully, trust me!) to stop it up, we could scarcely hear ourselves think. Finally, as the cavalry arrived, we gave up on that effort. Within a few minutes of those calls, we had firemen (in two pumpers and several auxiliary vehicles) in the yard, a paramedic, two sheriffs, and several gas company employees. That wasn't the full extent of it, either – four other fire trucks and numerous firemen visited all the houses within an 800 meter (about a half mile) radius of Tim's house and evacuated all those people, too!
The second photo below shows some of the people who were in Tim's house, which got evacuated while the break was still going. Tim himself is off to the right, making a face for the camera. The girl in pink is his granddaughter Randi (wouldn't the Brits get a kick out of that name?!?), who was in her Halloween costume. The border collie mix to the left of her in the photo is Booker, an abused puppy (eight months old) whom she's working to rehabilitate. The poor thing is terrified of any stranger who happens by. The little white dog is Lexie, one of Tim's two beloved companions.
This was substantial overkill for the actual problem, but all the responders were following a documented protocol they have for gas leaks (literally reading it from a manual). Actual facts on the ground and common sense are, naturally, not part of the equation :) We had light west winds at the time, blowing the escaping gas to the east – where there was nothing but miles of rolling hay and barley fields, and the foothills of the Wasatch Mountains. Natural gas is lighter than air, so the escaping gas was over everyone's heads within a few feet of the break. The odorant that's in the gas is heavier than air, though, so it stays near the ground. So the only actually dangerous thing around was right at the break itself, where a spark could have caused a big plume of burning gas.
The gas company employee who first responded was a fellow named John who I knew, because he was one of the guys who helped hook up the gas to my shed last fall. He recognized my tractor (which he and several of the firemen really like :), so he knew I was there somewhere. John grabbed a shovel and started digging a hole about 15' upstream of the break. It took him over an hour to find the pipe, because (as we discovered) it was nowhere near the marked line. Once he'd exposed the pipe, he used a clamping device – much like a gigantic set of vise-grips – to squeeze the pipe and close it off. Just like that, the noise stopped and the firemen, police, paramedics, and all the other assorted people took off. Within a couple of minutes it was just us and John.
Then a few minutes later, another gas company employee showed up. He (Nick) was another of the crew who hooked up my barn last fall, and one that I was particularly friendly with. He and John went to work to repair the break, and in the process gave us a running commentary on how their patch worked (a very clever bit of engineering, that), just how common these breaks are (several of them every day just in Cache Valley), and how that line was way, way off the mark. That last thing really surprised us, as we thought the painted line came from actual detection of the pipe underground. That's certainly how it worked when the Blue Stakes folks marked the gas lines around my house last year, and their lines were within an inch or two of where the pipe actually was. But Nick told us that if the pipe was installed before 1974 (which Tim's was, and mine wasn't), then the pipe would not have a wire running along it. The Blue Stakes guys therefore have no way to actually detect it. So how did they decide where to paint the line? They did it by looking at drawings made by the gas crew that installed the line, and measuring. No wonder there was an error! There's no way to know how accurately the actual installation followed the drawing, plus there's plenty of room for error in how the Blue Stakes folks measured. Tim and I felt much better about our own actions after learning how far off the line was, and that it wasn't detected in the first place. It would have been very nice to have been informed about this, which we made clear to a Blue Stakes representative who was on site.
Well, after all that it was getting on toward dark, and Tim and I were pretty darned tired. So we wrapped up for the day, installing a tarp over the hole around the well casing (as we're expecting several days of rain), cleaning up the tools, etc. It was good to have some routine, calm time after the preceding several hours of pure chaos :)
I'm still tired this morning, but I can tell I'll be all right by tomorrow...
Saturday, October 31, 2015
Paradise ponders...
Paradise ponders... Well, the solar installers showed up yesterday morning – but only after getting lost, driving past our place three times, losing track of three of the four vehicles in the their caravan, and finally all assembling an hour late in front of our shed. Then things went downhill from there :)
My plan had been to spend 15 minutes or so talking over the installation details with the installers, then to hightail it over to Tim's to start trenching. The weather was perfect for that sort of work: about 50°F, mostly clear, and no wind. But such was not to be, as within 60 seconds we discovered that virtually nothing could be done as planned. There were four major reasons why this was so: (1) our home's main circuit breaker panel is completely full, (2) we have a backup generator, (3) our shed has two stories, and (4) the shed doesn't yet have an Ethernet Internet connection. All four of these factors were known by the fellow who came out last month to survey the job and generate the quote that I accepted. Something went wrong between his survey and the quote writing, and I suspect that it mainly has to do with his prior experience being limited to homes in the city.
So I spent an hour with Alan W., the supervisor of the installer crew (which was ten people!), developing a new plan. The panels are going on the second story, south-facing roof of the shed, as planned – but – the conduit carrying the high-voltage DC output of the panels will penetrate the second story roof and then run inside the barn to the first floor, then outside to the inverter. The inverter (which we had previously planned to install in our home's garage) will be mounted on the south wall of the barn, outside. The AC output from the inverter will then run underground from the south side of the barn to the north side of the outbuilding where our electric meter is. That's 275' of underground conduit, with one crossing of our driveway. They're going to bring up a trencher in two weeks to dig that out, except that going under the driveway they'll use horizontal boring so as not to wreck our driveway pavement. They'll be crossing three Paradise irrigation 8" water mains, one 2" gas main, the 1" low pressure gas line running to the shed, our cable connection, our landline telephone connection, power to the old greenhouse, and the 1.5" low pressure gas line for the outbuilding. What could go wrong? That AC line, once they run it, will tie into the house's electrical supply inside the automatic transfer switch (ATS) for the backup generator. That's because it must be connected directly with the meter, and not to the generator if it's running. That solves all the actual solar power system issues, but it doesn't even resemble the plan we got a quote on!
Then there's the Ethernet issue. I have CAT6 cable running underground between the house and the shed, but it's not connected to anything. I was planning to do that this winter, when crawling around in the attic won't be so hard (the heat in the summer up there is very uncomfortable!). But the solar system's inverter requires Internet access for them to monitor it, so they need all this to work right now. So...they're going to find themselves a small wiring guy (to make it easier to work in the cramped attic space), and they're going to hook it all up. There's a bit of cable fishing to do in the house, but that's the only real challenge. None of this was anticipated in the original quote, though.
Sheesh.
Finally, after that was all done, I headed over to Tim's house with my trusty Kubota, and we got started on the trenching. We spent about half the day exposing the side of his well casing down to 5' deep, where the water line enters through the side and connects to the pipe going down the well to his pump. This was made challenging by the fact that a fairly large tree has grown 2' from the well casing for 40 years, and the entire area is full of roots going down about 3'. Also, it didn't help matters that starting at about 2' deep the soil transitioned from nice, soft topsoil into rock-hard compacted clay, bone-dry. We used the backhoe when we could, but we had to do a substantial amount of that work with a shovel, iron bar, and (when we got very close to the end) a screwdriver to break up that clay. We did manage to completely expose it though, and there was a bit of good news there that we didn't expect: the junction into the well casing appears to be in fine shape, and there's one critical piece that's brass – so it's completely corrosion-free. We were worried that he'd need a new casing penetration, but that looks like one thing we don't have to sweat.
The rest of the day we spent digging about 30' of trench. That doesn't sound like much for a half-day's work, but the first 4' or so was actually a tunnel! We bored under that tree's roots, in an effort to save it. We're not sure we succeeded, though, as we did break off 4 large roots on the well casing side of the tree, to get that well casing exposed. If Tim's lucky, the rest of the roots (about three quarters of the root disk) will sustain his tree. If not, we'll cut it down next spring and he'll plant a new one.
Tim was visibly cheered by the end of the day, because we'd made such fine progress, didn't find any new problems, and somehow managed not to break any more underground wires or pipes. He's hoping to find some time today to keep trenching, so I'm “on call” for that :)
I was very tired late yesterday afternoon when we finished working, so we ordered a pizza from Pizza Plus, and I ran up to get it (the pizza shop is three miles north of us, in Hyrum). It wasn't ready when I got there, so I ran over to Ridley's to do a little shopping. Mo'i was in need of bananas and buttermilk, so I loaded up with that. Shopping there was a little strange last night – the store was full of people in costume. Not just kids, either – plenty of adults were in costume as well. As I looked at all these people, I noted that it looked very old-fashioned: the costumes were all homemade, every last one. They were also the traditional characters: ghosts, goblins, witches, etc. Interesting, and I suspect a good indicator of the culture here. In San Diego, the homemade costumes would be a small minority; most of them would be commercially made. Then I picked up our pizza and drove home, where Debbie and I promptly demolished it. Very little of it went into the fridge for leftovers :)
My plan had been to spend 15 minutes or so talking over the installation details with the installers, then to hightail it over to Tim's to start trenching. The weather was perfect for that sort of work: about 50°F, mostly clear, and no wind. But such was not to be, as within 60 seconds we discovered that virtually nothing could be done as planned. There were four major reasons why this was so: (1) our home's main circuit breaker panel is completely full, (2) we have a backup generator, (3) our shed has two stories, and (4) the shed doesn't yet have an Ethernet Internet connection. All four of these factors were known by the fellow who came out last month to survey the job and generate the quote that I accepted. Something went wrong between his survey and the quote writing, and I suspect that it mainly has to do with his prior experience being limited to homes in the city.
So I spent an hour with Alan W., the supervisor of the installer crew (which was ten people!), developing a new plan. The panels are going on the second story, south-facing roof of the shed, as planned – but – the conduit carrying the high-voltage DC output of the panels will penetrate the second story roof and then run inside the barn to the first floor, then outside to the inverter. The inverter (which we had previously planned to install in our home's garage) will be mounted on the south wall of the barn, outside. The AC output from the inverter will then run underground from the south side of the barn to the north side of the outbuilding where our electric meter is. That's 275' of underground conduit, with one crossing of our driveway. They're going to bring up a trencher in two weeks to dig that out, except that going under the driveway they'll use horizontal boring so as not to wreck our driveway pavement. They'll be crossing three Paradise irrigation 8" water mains, one 2" gas main, the 1" low pressure gas line running to the shed, our cable connection, our landline telephone connection, power to the old greenhouse, and the 1.5" low pressure gas line for the outbuilding. What could go wrong? That AC line, once they run it, will tie into the house's electrical supply inside the automatic transfer switch (ATS) for the backup generator. That's because it must be connected directly with the meter, and not to the generator if it's running. That solves all the actual solar power system issues, but it doesn't even resemble the plan we got a quote on!
Then there's the Ethernet issue. I have CAT6 cable running underground between the house and the shed, but it's not connected to anything. I was planning to do that this winter, when crawling around in the attic won't be so hard (the heat in the summer up there is very uncomfortable!). But the solar system's inverter requires Internet access for them to monitor it, so they need all this to work right now. So...they're going to find themselves a small wiring guy (to make it easier to work in the cramped attic space), and they're going to hook it all up. There's a bit of cable fishing to do in the house, but that's the only real challenge. None of this was anticipated in the original quote, though.
Sheesh.
Finally, after that was all done, I headed over to Tim's house with my trusty Kubota, and we got started on the trenching. We spent about half the day exposing the side of his well casing down to 5' deep, where the water line enters through the side and connects to the pipe going down the well to his pump. This was made challenging by the fact that a fairly large tree has grown 2' from the well casing for 40 years, and the entire area is full of roots going down about 3'. Also, it didn't help matters that starting at about 2' deep the soil transitioned from nice, soft topsoil into rock-hard compacted clay, bone-dry. We used the backhoe when we could, but we had to do a substantial amount of that work with a shovel, iron bar, and (when we got very close to the end) a screwdriver to break up that clay. We did manage to completely expose it though, and there was a bit of good news there that we didn't expect: the junction into the well casing appears to be in fine shape, and there's one critical piece that's brass – so it's completely corrosion-free. We were worried that he'd need a new casing penetration, but that looks like one thing we don't have to sweat.
The rest of the day we spent digging about 30' of trench. That doesn't sound like much for a half-day's work, but the first 4' or so was actually a tunnel! We bored under that tree's roots, in an effort to save it. We're not sure we succeeded, though, as we did break off 4 large roots on the well casing side of the tree, to get that well casing exposed. If Tim's lucky, the rest of the roots (about three quarters of the root disk) will sustain his tree. If not, we'll cut it down next spring and he'll plant a new one.
Tim was visibly cheered by the end of the day, because we'd made such fine progress, didn't find any new problems, and somehow managed not to break any more underground wires or pipes. He's hoping to find some time today to keep trenching, so I'm “on call” for that :)
I was very tired late yesterday afternoon when we finished working, so we ordered a pizza from Pizza Plus, and I ran up to get it (the pizza shop is three miles north of us, in Hyrum). It wasn't ready when I got there, so I ran over to Ridley's to do a little shopping. Mo'i was in need of bananas and buttermilk, so I loaded up with that. Shopping there was a little strange last night – the store was full of people in costume. Not just kids, either – plenty of adults were in costume as well. As I looked at all these people, I noted that it looked very old-fashioned: the costumes were all homemade, every last one. They were also the traditional characters: ghosts, goblins, witches, etc. Interesting, and I suspect a good indicator of the culture here. In San Diego, the homemade costumes would be a small minority; most of them would be commercially made. Then I picked up our pizza and drove home, where Debbie and I promptly demolished it. Very little of it went into the fridge for leftovers :)
Friday, October 30, 2015
Curioser and curiouser...
Curioser and curiouser... The Curiosity rover on Mars is traveling through some strange-looking rock formations. I'm presuming these are formed by wind erosion...
Paradise ponders...
Paradise ponders... My neighbor Tim, with the water leak I described yesterday, got a plumber over for inspection and advice. The results were pretty much what we expected: he needs to replace that entire piece of pipe betwixt his well and his house. That means ... today is “trenching day”. I'll be over there this morning with my tractor, and we're really going to mess up his yard :) I'm really happy to have an opportunity to repay the extensive help Tim gave me last year. Hopefully we can avoid breaking any more pipes or electrical wires, but both are unfortunately quite possible. Something underground would have to be mighty tough to survive an encounter with my backhoe...
Yesterday was a cold, drizzly day; unpleasant to be outside in. Today should be clear, sunny, and dry – a good day for trenching. Tim has visitors over the weekend, so we can't continue the work until Monday – and the forecast for Monday is for temperatures in the low 40s, and lots of rain. Actually, it's about the same for Monday through Wednesday, except that on Wednesday the forecast is for snow. After today, it looks like almost a week before we can continue the trenching work! I'm guessing two to three days to complete the trench, but it could be more if we hit unanticipated obstacles. Our experience so far makes me think that's likely :)
Today the solar panel installers are scheduled to put up our installation: about 20 panels on the shed's upper roof, a high-voltage DC cable between the shed and the house, the inverter and controller in our house's garage, and the connection between the inverter and the circuit breaker panel. There's also a new electrical meter going in. They're telling me that they can do it all in a single day, as they'll have a “full crew” (whatever that means!) here, but I'm a bit skeptical of that. Part of the job includes some horizontal boring under our paved driveway, and I'd really like to watch that take place. Unfortunately, I'm almost certain to be trenching at the moment they do that. Dang it! On the other hand, maybe they won't actually finish the job today, in which case I most likely can watch them...
Yesterday was a cold, drizzly day; unpleasant to be outside in. Today should be clear, sunny, and dry – a good day for trenching. Tim has visitors over the weekend, so we can't continue the work until Monday – and the forecast for Monday is for temperatures in the low 40s, and lots of rain. Actually, it's about the same for Monday through Wednesday, except that on Wednesday the forecast is for snow. After today, it looks like almost a week before we can continue the trenching work! I'm guessing two to three days to complete the trench, but it could be more if we hit unanticipated obstacles. Our experience so far makes me think that's likely :)
Today the solar panel installers are scheduled to put up our installation: about 20 panels on the shed's upper roof, a high-voltage DC cable between the shed and the house, the inverter and controller in our house's garage, and the connection between the inverter and the circuit breaker panel. There's also a new electrical meter going in. They're telling me that they can do it all in a single day, as they'll have a “full crew” (whatever that means!) here, but I'm a bit skeptical of that. Part of the job includes some horizontal boring under our paved driveway, and I'd really like to watch that take place. Unfortunately, I'm almost certain to be trenching at the moment they do that. Dang it! On the other hand, maybe they won't actually finish the job today, in which case I most likely can watch them...
It's that time again...
It's that time again... At least, it is in Paradise. My lovely bride passed this along, and it's well worth remembering – just a few seconds of your time could save a cat's life...
British cheek (and a rant)...
British cheek (and a rant)... A London coffee shop was ordered to take down its sign, because it was “offensive” (a word that's beginning to offend me all by itself!). Look what the coffee shop did in response – it's hysterical, cheeky, and most likely very good for their business. I wonder how the originally offended people are feeling about this development? Passed along by reader, friend, and former colleague Simon M...
The notion that we have some obligation to avoid offending others is about as un-American as you can get. There's a very large distinction between choosing not to offend someone else (a choice I make frequently around my predominantly Mormon neighbors :) and being obligated to do so. The former is your free choice, and should you offend someone else (either deliberately or inadvertently), that's a great example of the exercise of America's key (and nearly unique) freedom of speech. You don't have to think very hard to come to the understanding that our freedom of speech is all about that freedom to offend someone else (or the government) if we want to. There's really no other purpose for that freedom. “Freedom of speech” and “freedom to offend” are really one and the same thing. You cannot have one without the other.
When I was a much younger lad, the liberals – what we'd call “classical liberals” today, but back then they were the only kind – were the ones defending our freedom of speech, and the conservatives wanted to curb it. I can't think of a better example than the desecration of the American flag. In the '60s, laws were on the books, and enforced, that made it illegal to (for example) burn the flag, or stomp on it on the streets. Personally I find such behavior offensive, and I would never do that myself – but the Supreme Court held (correctly, in my view) that such behavior was a form of speech, a symbolic way of protesting the U.S. government's actions – and as such it was protected by the Constitution. Liberals promoted that freedom; conservatives opposed it. Today the situation is completely reversed. The liberal-dominated institutions (especially, at the moment, our universities) are doing their level best to create, impose, and enforce speech codes that would make particular kinds of speech illegal. Naturally it would be the kinds of speech that they decide is offensive. This is not happening without controversy and without resistance, but nevertheless the liberals are making “progress” toward their newly-acquired goals of limiting freedom of speech.
That moves us toward the European norm, where speech is limited in ways that I suspect would surprise and dismay most Americans. It's not a norm I want to live under, and it's my fervent hope that the liberals in America fail in their efforts. I'm afraid, though, that they're succeeding ... and there aren't many other places I'd care to live that have anything like our (alleged) freedom of speech...
The notion that we have some obligation to avoid offending others is about as un-American as you can get. There's a very large distinction between choosing not to offend someone else (a choice I make frequently around my predominantly Mormon neighbors :) and being obligated to do so. The former is your free choice, and should you offend someone else (either deliberately or inadvertently), that's a great example of the exercise of America's key (and nearly unique) freedom of speech. You don't have to think very hard to come to the understanding that our freedom of speech is all about that freedom to offend someone else (or the government) if we want to. There's really no other purpose for that freedom. “Freedom of speech” and “freedom to offend” are really one and the same thing. You cannot have one without the other.
When I was a much younger lad, the liberals – what we'd call “classical liberals” today, but back then they were the only kind – were the ones defending our freedom of speech, and the conservatives wanted to curb it. I can't think of a better example than the desecration of the American flag. In the '60s, laws were on the books, and enforced, that made it illegal to (for example) burn the flag, or stomp on it on the streets. Personally I find such behavior offensive, and I would never do that myself – but the Supreme Court held (correctly, in my view) that such behavior was a form of speech, a symbolic way of protesting the U.S. government's actions – and as such it was protected by the Constitution. Liberals promoted that freedom; conservatives opposed it. Today the situation is completely reversed. The liberal-dominated institutions (especially, at the moment, our universities) are doing their level best to create, impose, and enforce speech codes that would make particular kinds of speech illegal. Naturally it would be the kinds of speech that they decide is offensive. This is not happening without controversy and without resistance, but nevertheless the liberals are making “progress” toward their newly-acquired goals of limiting freedom of speech.
That moves us toward the European norm, where speech is limited in ways that I suspect would surprise and dismay most Americans. It's not a norm I want to live under, and it's my fervent hope that the liberals in America fail in their efforts. I'm afraid, though, that they're succeeding ... and there aren't many other places I'd care to live that have anything like our (alleged) freedom of speech...
Thursday, October 29, 2015
Paradise ponders...
Paradise ponders... Yesterday morning I met with the realtor representing the sellers of the lots adjacent to the cabin we're buying in Newton, along with a local fellow (Terry G.) who knows all about the water situation there. We quickly discovered that he was the former owner (two owners ago) of the parcels we're looking at. We verified that there are irrigation water rights associated with those parcels, but ... there's a problem with the delivery of water. It seems that the water company is refusing to allow a connection to their distribution canal, which is only 100 yards or so from the parcels. Everybody in the meeting seemed to think this was outrageous behavior on the water company's part, and that a legal challenge would resolve it. The realtor and Terry both resolved to do just that. So ... this morning we put down an offer on the two parcels adjacent to the cabin, with the offer being contingent on the water delivery situation being satisfactorily resolved. If we manage to pull that off, we're going to end up with a piece of land that's 14 acres, with a nice cabin on it, both flat and hilly sections, an intermittent stream, highway access, a good well, and abundant irrigation water. That will be sweet!
My friend and neighbor Tim D. has been worried for several months now about a wet area north of his house. He was afraid it meant a water leak, and the area had pipes for both Paradise pressurized irrigation water and his well water running under it. The irrigation water would be vastly easier to repair, as those pipes are only 18" or so underground. His well water pipe was something over 4' down, and maybe as much as 6'. Paradise pressurized irrigation water was turned off about a week ago, and Tim found that his wet spot was still being supplied with water – there was no sign of it drying off at all. That meant bad news – it had to be his well water.
Yesterday he called me for help. He'd had the “Blue Stakes” people out to mark the locations of his gas, electric, and iron water pipes, so he now knew where it was safe to dig. It was time to figure out where that leak was! So I drove my little Kubota B-26 over to his house and we commenced digging where we'd seen signs of water bubbling up out of the ground. In very short order we broke an electric line. We'd known it was there, as it was marked, but we figured it would more than a foot down. Luckily we were smart enough to have turned it off at the breaker :) That line supplies power to his barn, which only has the power for lights, so this isn't a big deal (and it's easy to fix). By that time the hole had filled with water, so we pumped it out with my little sump pump.
I dug a little deeper, and Tim waved wildly for me to stop – I'd tapped a 2" PVC pipe that we didn't even know was there. He stopped me just in time; it wasn't broken. I repositioned the tractor so my digging would avoid that pipe, and went a little further – and promptly snapped another electrical wire. It wasn't energized, and Tim has no idea what it's for. At first we thought it might be the power to his pump, run very oddly nowhere near the pipeline – but when we turned his pump back on water started squirting out of the ground, so we knew it wasn't that wire. It's still a mystery. We pumped the hole out again.
Then I dug without hitting anything but tree roots, carefully. We'd use the backhoe to dig down 6" or so, then Tim would jump in the hole and explore with his shovel to see if the pipe was close. If it wasn't, he'd crawl out of the hole and I'd dig another 6" or so. We repeated this until we got down to about 5' deep, and then Tim's exploration found the pipe. It was an old (40 years!) galvanized pipe, 1.5", and the hole was right on top and plainly visible. The pipe is terribly corroded, so most likely he's going to have to replace the entire run (100' or so) from his well to his house. Tim's not real happy about that. We figure a big part of his cost for replacement will be the trenching, and he and I can do that. First he's going to get a professional plumber out there to see what the right way to fix it is, then almost certainly he and I will be trenching. This is just like a year ago, when he helped me trench for our shed's electricity, water, gas, and network connections.
Elray the well driller talked with me just before he went home yesterday afternoon. He's now down to 200', and he struck a water-bearing layer that he calls marginally acceptable. He'd stop there if I asked him to, but would prefer to go deeper in the hopes of finding a better layer. We're going deeper – but not until next week, as he's going on a mini-vacation until Monday.
My friend and neighbor Tim D. has been worried for several months now about a wet area north of his house. He was afraid it meant a water leak, and the area had pipes for both Paradise pressurized irrigation water and his well water running under it. The irrigation water would be vastly easier to repair, as those pipes are only 18" or so underground. His well water pipe was something over 4' down, and maybe as much as 6'. Paradise pressurized irrigation water was turned off about a week ago, and Tim found that his wet spot was still being supplied with water – there was no sign of it drying off at all. That meant bad news – it had to be his well water.
Yesterday he called me for help. He'd had the “Blue Stakes” people out to mark the locations of his gas, electric, and iron water pipes, so he now knew where it was safe to dig. It was time to figure out where that leak was! So I drove my little Kubota B-26 over to his house and we commenced digging where we'd seen signs of water bubbling up out of the ground. In very short order we broke an electric line. We'd known it was there, as it was marked, but we figured it would more than a foot down. Luckily we were smart enough to have turned it off at the breaker :) That line supplies power to his barn, which only has the power for lights, so this isn't a big deal (and it's easy to fix). By that time the hole had filled with water, so we pumped it out with my little sump pump.
I dug a little deeper, and Tim waved wildly for me to stop – I'd tapped a 2" PVC pipe that we didn't even know was there. He stopped me just in time; it wasn't broken. I repositioned the tractor so my digging would avoid that pipe, and went a little further – and promptly snapped another electrical wire. It wasn't energized, and Tim has no idea what it's for. At first we thought it might be the power to his pump, run very oddly nowhere near the pipeline – but when we turned his pump back on water started squirting out of the ground, so we knew it wasn't that wire. It's still a mystery. We pumped the hole out again.
Then I dug without hitting anything but tree roots, carefully. We'd use the backhoe to dig down 6" or so, then Tim would jump in the hole and explore with his shovel to see if the pipe was close. If it wasn't, he'd crawl out of the hole and I'd dig another 6" or so. We repeated this until we got down to about 5' deep, and then Tim's exploration found the pipe. It was an old (40 years!) galvanized pipe, 1.5", and the hole was right on top and plainly visible. The pipe is terribly corroded, so most likely he's going to have to replace the entire run (100' or so) from his well to his house. Tim's not real happy about that. We figure a big part of his cost for replacement will be the trenching, and he and I can do that. First he's going to get a professional plumber out there to see what the right way to fix it is, then almost certainly he and I will be trenching. This is just like a year ago, when he helped me trench for our shed's electricity, water, gas, and network connections.
Elray the well driller talked with me just before he went home yesterday afternoon. He's now down to 200', and he struck a water-bearing layer that he calls marginally acceptable. He'd stop there if I asked him to, but would prefer to go deeper in the hopes of finding a better layer. We're going deeper – but not until next week, as he's going on a mini-vacation until Monday.
Wednesday, October 28, 2015
You know the government is out of control...
You know the government is out of control ... when this sort of thing happens with a science agency! The NOAA has data supporting a skeptical view of anthropogenic global warming, but is refusing to release it. Do you think there might be a funding agenda at work here? Sheesh...
Curiosity has lots of new Mars photos being dumped...
Curiosity has lots of new Mars photos being dumped... There was a slow spell for a few weeks, but the pace is picking up again. I don't know exactly what its doing right now, so I don't know why the variability...
Subscribe to:
Posts (Atom)




