Thursday, October 29, 2015

Paradise ponders...

Paradise ponders...  Yesterday morning I met with the realtor representing the sellers of the lots adjacent to the cabin we're buying in Newton, along with a local fellow (Terry G.) who knows all about the water situation there.  We quickly discovered that he was the former owner (two owners ago) of the parcels we're looking at.  We verified that there are irrigation water rights associated with those parcels, but ... there's a problem with the delivery of water.  It seems that the water company is refusing to allow a connection to their distribution canal, which is only 100 yards or so from the parcels.  Everybody in the meeting seemed to think this was outrageous behavior on the water company's part, and that a legal challenge would resolve it.  The realtor and Terry both resolved to do just that.  So ... this morning we put down an offer on the two parcels adjacent to the cabin, with the offer being contingent on the water delivery situation being satisfactorily resolved.  If we manage to pull that off, we're going to end up with a piece of land that's 14 acres, with a nice cabin on it, both flat and hilly sections, an intermittent stream, highway access, a good well, and abundant irrigation water.  That will be sweet!

My friend and neighbor Tim D. has been worried for several months now about a wet area north of his house.  He was afraid it meant a water leak, and the area had pipes for both Paradise pressurized irrigation water and his well water running under it.  The irrigation water would be vastly easier to repair, as those pipes are only 18" or so underground.  His well water pipe was something over 4' down, and maybe as much as 6'.  Paradise pressurized irrigation water was turned off about a week ago, and Tim found that his wet spot was still being supplied with water – there was no sign of it drying off at all.  That meant bad news – it had to be his well water.

Yesterday he called me for help.  He'd had the “Blue Stakes” people out to mark the locations of his gas, electric, and iron water pipes, so he now knew where it was safe to dig.  It was time to figure out where that leak was!  So I drove my little Kubota B-26 over to his house and we commenced digging where we'd seen signs of water bubbling up out of the ground.  In very short order we broke an electric line.  We'd known it was there, as it was marked, but we figured it would more than a foot down.  Luckily we were smart enough to have turned it off at the breaker :)  That line supplies power to his barn, which only has the power for lights, so this isn't a big deal (and it's easy to fix).  By that time the hole had filled with water, so we pumped it out with my little sump pump.

I dug a little deeper, and Tim waved wildly for me to stop – I'd tapped a 2" PVC pipe that we didn't even know was there.  He stopped me just in time; it wasn't broken.  I repositioned the tractor so my digging would avoid that pipe, and went a little further – and promptly snapped another electrical wire.  It wasn't energized, and Tim has no idea what it's for.  At first we thought it might be the power to his pump, run very oddly nowhere near the pipeline – but when we turned his pump back on water started squirting out of the ground, so we knew it wasn't that wire.  It's still a mystery.  We pumped the hole out again.

Then I dug without hitting anything but tree roots, carefully.  We'd use the backhoe to dig down 6" or so, then Tim would jump in the hole and explore with his shovel to see if the pipe was close.  If it wasn't, he'd crawl out of the hole and I'd dig another 6" or so.  We repeated this until we got down to about 5' deep, and then Tim's exploration found the pipe.  It was an old (40 years!) galvanized pipe, 1.5", and the hole was right on top and plainly visible.  The pipe is terribly corroded, so most likely he's going to have to replace the entire run (100' or so) from his well to his house.  Tim's not real happy about that.  We figure a big part of his cost for replacement will be the trenching, and he and I can do that.  First he's going to get a professional plumber out there to see what the right way to fix it is, then almost certainly he and I will be trenching.  This is just like a year ago, when he helped me trench for our shed's electricity, water, gas, and network connections.

Elray the well driller talked with me just before he went home yesterday afternoon.  He's now down to 200', and he struck a water-bearing layer that he calls marginally acceptable.  He'd stop there if I asked him to, but would prefer to go deeper in the hopes of finding a better layer.  We're going deeper – but not until next week, as he's going on a mini-vacation until Monday.

Wednesday, October 28, 2015

You know the government is out of control...

You know the government is out of control ... when this sort of thing happens with a science agency!  The NOAA has data supporting a skeptical view of anthropogenic global warming, but is refusing to release it.  Do you think there might be a funding agenda at work here?  Sheesh...

Curiosity has lots of new Mars photos being dumped...

Curiosity has lots of new Mars photos being dumped...  There was a slow spell for a few weeks, but the pace is picking up again.  I don't know exactly what its doing right now, so I don't know why the variability...

A big day for Cassini today...

A big day for Cassini today...  It's going to dive through the water jets of Enceladus, just 30 miles above the south pole...

Workers make a mistake...

Workers make a mistake ... and throw away an art exhibit.  I read that headline and wondered how they could have made such a mistake.  With a little research, I found the photo at right of the “art” – and now I don't think those workers made a mistake at all!

CISA passes the senate...

CISA passes the senate...  I'm not really surprised by this, but I am certainly disappointed.  It's another whack at liberty, which as I recall was actually a founding principal of this country.  CISA, in my view, is more horrible as a symptom of the erosion of American liberty (which mainly means freedom from government interference and oversight) than it is in-and-of itself.  In other words, the fact that CISA is part of a pattern is worse than it is itself – sort of like Giuliani's “broken windows” thesis about urban crime.  The broken window itself isn't all that bad, but as a part of the pattern of urban crime, it is...

Paradise ponders...

Paradise ponders...  The snap at right is the appetizer Debbie and I shared last night, starting another fine dinner at Le Nonne's.  This was only our second meal ever there, and we were wondering if the repeat would be as good as the first time.  We needn't have worried!

The appetizer was homemade Italian bread with garlicky olive oil and herbs, a garnishing dominated by dried tomatoes, a burrata (fresh mozzarella stuffed with mozzarella curds and cream), and several slices of a fine prosciutto.  We were amused by the giant knife, suitable for felling trees – but the appetizer itself was heavenly.  My entree was veal ravioli in a truffle sauce, topped with slices of black truffle; Debbie's was penne pasta in marinara, with spicy, sausage-y meatballs.  Both were superb; the ravioli right up there with the best I've ever had (which was in Italy!).  For dessert (the least wonderful part of our last meal) we tried the lemon cake – and it was just as good as the rest of the meal.  The cake was light and delicious, the lemon filling evocative of fresh lemons (though not quite as tart as we'd like it), and the accompanying strawberry puree and fresh strawberry the perfect companion.  Last time we had creme brulee; I guess the Italians just don't know how to make that French dish :)  A memorable meal!  Two visits now, and we still haven't ordered anything that was actually on the menu.  Both times the waitress listed specials that enticed us...

Last night I got an email from our solar supplier.  They're planning to start installation on Thursday morning (tomorrow!).  We have rain in the forecast, though, so I've got a question into them about whether they really want to be installing stuff on a slippery metal roof in the rain :)

And speaking of forecasts ... we have snow in the forecast for early next week, and several days of high temperatures in the 40s.  Winter is fast approaching!

This morning I'm catching up on our finances.  Mainly that means entering receipts into Moneydance (the financial management program we use).  We're about to start doing something we've never done before: keep separate accounts for the household (which I do) and for Debbie's spending.  This is in an effort to split the workload, and also to have the person doing the work be the one who actually incurred the expense – we've noticed that this makes handling the inevitable errors in reconciliation much easier :)  One of the things I did this morning was something that's now become a habit: scanning in all the paperwork involved: receipts, bills, medical paperwork, etc.  I started doing this just this past January.  At this point I have just over 1,000 documents in the electronic storage – and the original paper has all been shredded.  No more file cabinets and shoe-boxes full of receipts!  The search facility to find documents in that electronic storage is still just as zippy as it was in the very beginning, and I use it quite often.  We used to cringe every time a situation came up that required us to find a piece of paper.  Now it's as easy as using Google, because the user interface is just like Google's.  This morning I searched for two things: "Paradise irrigation" and a tradesman's name.  In both cases, the search responded in well under a second, and the document I was looking for was in the first 2 or 3 results.  One click and an image of the document is right there on the screen in front of me.  Our paper shredder (a big one) is nearly full for the first time since we bought it last December – all of those more than 1,000 documents are in there.  Lovely, that is!

Today I'm headed up to Newton with our realtor for a meeting with several people concerning the property adjacent to the cabin we're buying for my brother.  That property – 4.5 acres of hay field and hillside – abuts the cabin's property to its west.  It was just listed for sale (although it's been for sale by the owner for over a year) with no “bites”; the owner is eager to sell and the price is attractive.  Other than its convenient location, it comes with one other very attractive feature: a share of irrigation water rights.  We're thinking that if we were to combine it with the cabin's property we'd end up with the cabin on 10 acres, highway frontage nearly level with the cabin (the cabin's current access a long driveway off a back road), a couple acres of almost-flat field (where the hay currently is), and 3 acre-feet of water per year (that's what the irrigation water right conveys).  That's a pretty sweet setup for anyone who wants a place in the boonies, where they can grow something.  Adding to that is the fact that the hillside included all faces south to southwest – perfect for growing things in a warmer micro-climate than the flat field would provide.  The meeting today is to nail down all the particulars, including (especially!) the water rights.  The big unknown for me is how the irrigation water gets to the parcel, though I already know there is a way, as it was irrigated this year for hay.

Tuesday, October 27, 2015

Paradise ponders...

Paradise ponders...  Elray the well driller is now down to 190'.  The water we hoped to find at around 120' didn't materialize, dang it, so we've got to go deeper to the water layers that are sure to be there – but with much more iron in the water.  At 180' he struck a source of very “dirty” water, full of clay washings – no good at all for a well.  Then at 192' he struck a layer of sandstone so soft that the drill cut faster than in clay.  That layer was full of water – but also full of sand from the sandstone.  Elray knows from hard experience that a well tapping that sort of geology is unreliable.  So tomorrow he'll go even deeper.

Monday, October 26, 2015

Paradise ponders...

Paradise ponders...  Skip to the “Geek-free” label below to bypass the programming content.

Yesterday was a “mostly programming” day for me.  I'm building an index class (for use in sparse vectors and sparse matrices) that doesn't use objects for its members (as do all the standard Java collections).  Why?  Because the matrices (in particular) will have millions of numbers, and storing each in an object triples the amount of memory consumed.  It's also a significant performance hit – in my testing prior to deciding to implement this, numbers-in-objects were almost six times slower than numeric primitives.  Implementing the index in arrays of primitives is much faster, but it's also a lot harder than simply using the Java collections.  In all my years of Java programming, I've never run into a situation like this before – and apparently, not too many other people have, either, as I can't find production-quality (or even working!) open source implementations anywhere.

So down this rabbit hole I go :)  The task at the moment is the aforementioned index, which I'm implementing as a red/black tree entirely stored in arrays of longs.  Red/black trees are a classic solution for this problem.  I've long known about them, have read extensively about them (in particular, their O(log2(n)) performance for all the key operations), but I have never before actually implemented one.  Yesterday I finished the first hurdle of difficulty: insertion is up and running, with an implementation I'm happy with.  I also have completed a test harness for verifying the correctness of the tree.  Next step (and last challenging bit!): tree node deletion.

Geek-free:

 As I retrieved my tea cup from the dishwasher this morning, I marveled once again at the unobvious trick that cured our spotted dishes ills.  I keep meaning to write about this, but haven't remembered until this morning.  After Debbie joined me in Paradise, in December of last year, we noticed something annoying: our dishes would come out of the dishwasher with whitish spots all over them.  It was especially noticeable on anything made of metal or glass, but they were actually on all the dishes – if you ran your finger over a porcelain plate, you could feel them there as well.  I tried everything I could think of to troubleshoot the problem, including partially disassembling the dishwasher to check for some kind of blockage.  We assumed that the problem was related to rinsing somehow, because the spots came right off if we rinsed the (washed!) dishes under the faucet and hand-dried them.  Nothing I tried worked.

In sheer desperation, I resorted to Google – which, in hindsight, should have been my first action (like it is with software engineering these days).  In mere seconds, after reading several articles, a pattern emerged: people with soft water are usually putting too much soap in their dishwashers.  We have very soft water, the result of my installing a first-class water softener last year.  Were we putting too much soap in?  Probably, because we were using the same amount we did back in Jamul, where we had extremely hard water.  So we reduced our soap by a factor of about four, and ... the dishes came out spotless and sparkling.  It really was that simple.  The cup for the soap on the dishwasher was sized to handle the needs of people with soft water, so when you “fill” it properly for hard water, it looks like you're putting way too little in.  That happened several months ago, and it still boggles my mind every time I pull the perfect, squeaky-clean, sparkling dishes out of the dish washer...

Today is the last day of our inspection period on the log cabin we're buying.  We still have a couple of things left to do, so I'm expecting to be out part of the day.  Elray (the well driller) will be back today, and he will be drilling past the 120' mark by mid-day – which means today could be the day he hits water.  If he does, that's especially good news for us, as the water at that depth has considerably less iron in it than does the water from deeper layers.  On Friday I mentioned to Elray that I had never learned to weld.  His response: he's going to bring some junk metal and a spare “hood” for me, and he's going to give me some free lessons.  He uses a gas welding rig (oxygen and propane), which I have watched in use but never tried myself.  Should be interesting!  I'm certain Elray will be highly entertained :)

Sunday, October 25, 2015

“…a house of pudding cannot stand.”

“…a house of pudding cannot stand.”   That's from the conclusion of Fred Reed's ponder about the wimpiness of today's America:
This ménage of middle-school delicates is not the country that fought World War II, or Vietnam. It is a jellyfish threatening to collapse under any serious stress. Corrupt, seriously divided racially, the middle-class sinking, ruled by fools and kleptocrats, a house of pudding cannot stand. Scared, fat, weak, fragile, narcissistic, herd-minded, prissy, censorious and, increasingly, ignorant. Deliberately ignorant. This is wonderful stuff.

It warms a curmudgeon’s heart.
Read the whole thing.

What Fred describes is precisely what I saw in the past 20 years or so of working in the city.  My profession (software engineering) depends on a lot of teamwork – but some of my colleagues took that to an extreme that I found downright scary.  Their embracing of interdependence and aversion to independent operation was startling to me – and not just in their professional life, either.  Their personal lives were full of the same thing.  I worked with dozens of people – mostly men, mind you – who wouldn't be able to even identify the tools in my toolbox, much less actually use them.

How did America get like this?  What happened to the ruggedly independent and self-reliant American who was once the symbol of the country?

Well, not all of America matches Fred Reed's description, thank goodness.  We saw a much more traditional sort of American when we lived in Jamul, just 35 miles from the city.  There we saw many examples of people whom Fred would recognize as those rugged independents.  Now that we've moved to Utah, that is the norm, no longer the exception.  This is a part of the country where there are no safe houses, where people still hunt for meat, where everybody has a toolbox and knows how to use it.

I suspect Fred would like it here :)

Saturday, October 24, 2015

Republican 2016 presidential primary...

Republican 2016 presidential primary...  The current data (derived from Betfair wagering).  While the U.S. polls show Trump and Carson at the top, by far ... the people putting their money down on the race are favoring Rubio by a wide margin.  What do they (think they) know that the pollsters aren't picking up?

If you're not familiar with using betting data in a situation like this, here's the one thing that's important to know: since about the mid-'90s, the betting data has been far more reliable in predicting the outcome of elections than polls have been – and that difference is increasing over time.  Either bettors are getting better information, pollsters are getting worse (or are more overtly biased), or both.  I'm guessing both...


Online encyclopedia of integer sequences...

Online encyclopedia of integer sequences...  I've posted about this fascinating resource before, but today I ran across a nice story about Neil Sloane, the mathematician who created it...

I don't get too excited...

I don't get too excited ... when I read about foreign countries spying on us.  One reason why: we do it too.  Another reason: we do almost nothing to stop it.  If we don't like the spying, then instead of being all offended and self-righteous when friend or foe spies on us, we should instead concentrate on defending ourselves.  The current plague of Chinese industrial spying, for example, should be seen as a failure of our defenses against spying (in effect, inviting the spies!) – not as some nefarious Chinese plot.

The current situation is as if we tore the front door off our house, put giant billboards advertising that fact on the freeway, then act surprised and hurt when thieves rush in to steal all our stuff.  I know from personal experience at the last several software companies I worked for that stealing all their source code would only have been moderately difficult for a complete outsider with no internal connections – and completely trivial for anyone with any insider assistance at all.  Anyone with even the slightest interest in the technology I worked on could have had it all (and quite possibly did!) very easily...

Pluto is weird!

Pluto is weird!  The photo at right is one of the latest downlinked from New Horizons from its Pluto encounter earlier this year.  Those sure look like “canyons” formed by some kind of flowing liquid!  Pluto is just chock full of surprises, making the scientists on the project very happy. 
Also in today's Pluto-related news: a first photo (at left) of Kerberos (one of its moons), which isn't anything at all like what astronomers expected.

Researchers really hit the jackpot with the New Horizons probe...

Friday, October 23, 2015

Paradise ponders...

Paradise ponders...  Earlier this week, Michelle H. (the wonderful woman who cleans our house for us, but who is fast becoming a good friend) invited Debbie to a “salsa social” put on by Paradise Ward 2's Relief Society.  Paradise Ward 2 is the area (including our home) of one congregation of the Paradise LDS (Mormon) church.  This particular Relief Society is the same group of women who insisted on feeding us earlier this year, shortly after Debbie was injured.

Last night was the evening of the salsa social, and Michelle picked Debbie up at 6:30 and took her there and back.  It was held at the home of Pam and Paul N.; Paul was the preceding bishop of the ward, just after Tim D. (our neighbor to the north), less than a mile from our house.  Debbie came back all smiley and happy – she had a wonderful time meeting a bunch (20 or 25) of the local women.  She reports that they were all very friendly, eager to get to know her (it's not every day there's a new face in town!).  As she told them, it was really nice for her to hear women's conversation, instead of just that with the slug she married :)

We love living here!

I went out this morning to check in with Elray (the well driller) to see what his progress is.  He's got the hole bored down to 90', has 45' of 10" casing down (this will later form the basis for the 40' of "seal" required around every new well), and about to start putting the first 90' of casing down the hole.  In the first two photos below, you can see the "sticks" he's just finished pulling out of the hole.  The 10" diameter drill bit (the working end of which is in the last photo) is still in the hole at that point, but held up at the very top.  You can also see the "mud" (hydrated clay) that has been drilled, puddled in the foreground.  There's quite a pile of mud there, and when I commented on that Elray told me that when the mud is loosened and hydrated, it expands – sometimes considerably, by a factor of several times the volume.  Who knew that dirt swelled up?  The third photo shows the end of a pile of seven 20' lengths of 6" diameter casing.  Elray will be welding these into a single pipe as he inserts the casing down the hole.  It's fascinating to watch him work on this, especially when he has to move heavy things around – that rig and his skill makes it look really easy.  I watched him extract the 10" drill bit this morning.  It's a piece of steel about 7' long overall, weighing well over 200 lbs.  Elray lifted it out with a hoist, then swung it around like a giant pendulum until the working end was swinging over the spot where he wanted to lay it on the ground, then at precisely the right moment he dropped the lift down and placed it within inches of where he told me he would.  He never had to work hard for that whole job...


Thursday, October 22, 2015

More photos downlinked from New Horizons...

More photos downlinked from New Horizons...  The one at right is of Charon.  I'm still boggled that we're seeing these sorts of images...

Wednesday, October 21, 2015

This is pretty funny...

This is pretty funny...  It's also the reason why I use a password manager (1Password, in my case)...

Cyr wheel...

Cyr wheel...  That's apparently what this is called.  The performer is Jeremy Buck.  Reader Simi L. sent this along, with this note:
Pretty spectacular! Note in particular how he never runs over his fingers.

Japanese maple...

Japanese maple ... at the Portland (Oregon) Japanese Garden.  I've visited that garden and the very famous tree, though not (unfortunately!) while it was in fall color.  It truly is a gorgeous specimen...

That's one very impressive machine!

That's one very impressive machine!  See the ant-like men working around its bottom to get a good idea of the scale of the thing.  It's erecting segments of a new viaduct in China.  One thing I'm left wondering: how on earth did they get that machine to the job site?  Did they build it on site?