Progress in Paradise... Debbie's doing fine. There were a few changes today. The most noticeable one: she developed a spectacular shiner (a black eye), with a dark blue/purple bruise extending nearly all the way around her eye. This afternoon that same part of her face swelled, but it has since gone back down. The pain and swelling in various other places is starting to recede. The pain medication she's taking is an excellent appetite suppressant, but I managed to find some food that she enjoyed: french fries and turkey salad from a place that's new to us. It's called “Juniper”, and it's located in downtown Logan. Our neighbor Tim D. recommended it to us for the soups (which I bought some of, but we haven't tried yet). I tried a halibut sandwich, and it was just plain delicious. The fish was perfectly done, and there was plenty of it – on a nice bun that tasted homemade, though there are enough great bakeries here that it could be store-bought. It's clear this is a place that we will return to.
In between other things today, I managed to get the lawn mowed. I also mowed down about an acre of weeds to the west of our house. Things are looking much neater around the homestead :)
I took the dogs for a walk in which we passed a neighbor's pasture that is currently the home to a couple of beautiful horses. The horses were interested in the dogs, and vice versa. Race got a good nose-rub in with the second of the horses in the photos below:
I've posted a couple photos of the robin chicks, in a low nest built in a half-dead tree in our front yard. Here's what they looked like today – they're outgrowing their puny nest:
Saturday, June 6, 2015
D-Day...
Light blogging alert...
Light blogging alert... On Thursday evening I took our dogs for a short walk just before we planned to retire. When I came back in the house, Debbie was sitting on the bottom of the stairs, looking dazed and a bit confused. She'd fallen down the stairs just a minute or so earlier – she'd been walking down them in her stocking feet, and the slipped out from under her. I saw her hand swelling up rapidly, and she was feeling pain in her knee (the one she broke two years ago), head (which had a big bump), and hand. Time for the ER.
There we had the same general sort of experience we've had before with medical care here – all good. The people, in particular, were wonderful. The ER doctor on duty was the same fellow who saw Debbie after her fall in March. When we walked in, she was the only patient there – but soon afterward, the ER filled up, so naturally things got a little slower. We were there for a couple hours. They got her on pain medication quickly, then it was X-ray time. Lots of X-rays, from head to toe. The good news: nothing was broken. The bad news: lots of bruising, a broken vein in her hand (hence the swelling), and the pain in the knee (twice injured already) is worrisome. We've got an MRI scheduled for next Tuesday to get the knee checked out more thoroughly.
Meanwhile, Debbie is doped up and laid up. I'm taking care of all the things she normally does, plus helping her out as needed. She can't (yet) walk or get around on her own, so there's lots to do.
So blogging will be light...
There we had the same general sort of experience we've had before with medical care here – all good. The people, in particular, were wonderful. The ER doctor on duty was the same fellow who saw Debbie after her fall in March. When we walked in, she was the only patient there – but soon afterward, the ER filled up, so naturally things got a little slower. We were there for a couple hours. They got her on pain medication quickly, then it was X-ray time. Lots of X-rays, from head to toe. The good news: nothing was broken. The bad news: lots of bruising, a broken vein in her hand (hence the swelling), and the pain in the knee (twice injured already) is worrisome. We've got an MRI scheduled for next Tuesday to get the knee checked out more thoroughly.
Meanwhile, Debbie is doped up and laid up. I'm taking care of all the things she normally does, plus helping her out as needed. She can't (yet) walk or get around on her own, so there's lots to do.
So blogging will be light...
71 years ago today...
71 years ago today ... the Allies invaded Normandy, marking the start of the extended invasion from the Nazi's west (the Soviets were already attacking from the Nazi's east). After much hard fighting, the Allies brought the Nazis to their knees, and the European front of WWII was over.
I've walked Omaha beach in Normandy, and visited quite a few sites of battles in WWII. I've also visited three Nazi concentration camps, and the ruins of Soviet fortifications in Estonia, and Nazi gun emplacements outside St. Petersburg (Leningrad). While I've read quite a bit of history (especially of WWII and the rise to power of the Nazis and the Meiji), but physically visiting the sites of the events I'd read about was more moving, more profound than reading alone could ever be. On the Pacific side, I've visited Hiroshima, Nagasaki, Okinawa, Tarawa, and Peleliu. My reading of history and those experiences have shaped me, especially politically. I wish more Americans could (and would) do the same...
I've walked Omaha beach in Normandy, and visited quite a few sites of battles in WWII. I've also visited three Nazi concentration camps, and the ruins of Soviet fortifications in Estonia, and Nazi gun emplacements outside St. Petersburg (Leningrad). While I've read quite a bit of history (especially of WWII and the rise to power of the Nazis and the Meiji), but physically visiting the sites of the events I'd read about was more moving, more profound than reading alone could ever be. On the Pacific side, I've visited Hiroshima, Nagasaki, Okinawa, Tarawa, and Peleliu. My reading of history and those experiences have shaped me, especially politically. I wish more Americans could (and would) do the same...
Friday, June 5, 2015
Progress in Paradise...
Progress in Paradise... Debbie and I managed to get all the EVA foam laid down in her indoor agility court, on the west side of our shed. The first photo below shows the work in progress; the second shows the finished result. Installing this stuff was actually quite easy, though we had to learn some new tricks along the way. One unexpected challenge: the squares of foam are cut to metric size. Though they were sold as one yard square of 3/4" thick foam, they are actually one square meter (39.37" on a side) and 2 cm thick (which is slightly more than 3/4"). This made our layout just a tad more tricky than we'd first imagined, as of course our room is laid out in feet and inches. Oh, well :)
The EVA foam is pretty tough stuff. Cutting it with a knife, or possibly with big shears, looked like it would be a real pain in the patoot. So I did the obvious thing and looked it up on google: presto! A whole world of video tutorials, written descriptions, etc. The answer turned out to be straightforward: use a hot knife. Great. Where does one get a hot knife? Well it turns out I already had one, and didn't even know it! Last year I bought a Weller soldering gun, to do some heavy duty soldering. In the kit was a pair of hot knife bits. They can only cut about 1/4" deep, but three passes and I had it. It worked like a champ, especially when we figured out that Debbie could separate the cut while I wielded the (massive) soldering gun. I made one mistake while doing the whole floor, and we managed to re-use the square I messed up anyway.
While we were partway through this exercise, a crew from Statewide Paving showed up to “seal” our driveway. This isn't something I knew about until last year, when our neighbor Tim D. – a former paving supervisor – educated me about it. This is an area of business rife with shady operators and inferior products, so choosing the right product and contractor is important. These folks Tim had done business with before, and he knew that they did good work with the best product (a pure asphalt spray that contains no water).
The photos below show them at work on two of the three phases of the job. The first phase is simply cleaning off the driveway (no photo). They use a special wheeled blower with a 10 HP gas engine; it's powerful enough to blow fist-sized rocks right off the driveway. They also scrape any heaped-up soil or other junk off the pavement. This first phase is more than half the labor of the whole job. The second phase is filling in all the pits and cracks with a special thick asphalt (first photo below). Then, finally, they spray on the sealer (last photo). The guys were really good with a piece of plywood used as a shield to keep the spray off our lawn and plants.
Because our driveway had never been sealed before, they're going to put two coats on. The second coat goes on today.
So what does a sealer do, anyway? It makes the top surface of the pavement watertight, and (when done right) fills in all the little pits in the top surface. Both of these effects prevent water from infiltrating the pavement and then freezing in the winter (which would crack the pavement). Asphalt pavement, when first laid down, is a mixture of asphalt, gravel, and sand. It's not solid, though – in fact, it's rather porous. The sealer puts that waterproof layer on top...
The EVA foam is pretty tough stuff. Cutting it with a knife, or possibly with big shears, looked like it would be a real pain in the patoot. So I did the obvious thing and looked it up on google: presto! A whole world of video tutorials, written descriptions, etc. The answer turned out to be straightforward: use a hot knife. Great. Where does one get a hot knife? Well it turns out I already had one, and didn't even know it! Last year I bought a Weller soldering gun, to do some heavy duty soldering. In the kit was a pair of hot knife bits. They can only cut about 1/4" deep, but three passes and I had it. It worked like a champ, especially when we figured out that Debbie could separate the cut while I wielded the (massive) soldering gun. I made one mistake while doing the whole floor, and we managed to re-use the square I messed up anyway.
While we were partway through this exercise, a crew from Statewide Paving showed up to “seal” our driveway. This isn't something I knew about until last year, when our neighbor Tim D. – a former paving supervisor – educated me about it. This is an area of business rife with shady operators and inferior products, so choosing the right product and contractor is important. These folks Tim had done business with before, and he knew that they did good work with the best product (a pure asphalt spray that contains no water).
The photos below show them at work on two of the three phases of the job. The first phase is simply cleaning off the driveway (no photo). They use a special wheeled blower with a 10 HP gas engine; it's powerful enough to blow fist-sized rocks right off the driveway. They also scrape any heaped-up soil or other junk off the pavement. This first phase is more than half the labor of the whole job. The second phase is filling in all the pits and cracks with a special thick asphalt (first photo below). Then, finally, they spray on the sealer (last photo). The guys were really good with a piece of plywood used as a shield to keep the spray off our lawn and plants.
Because our driveway had never been sealed before, they're going to put two coats on. The second coat goes on today.
So what does a sealer do, anyway? It makes the top surface of the pavement watertight, and (when done right) fills in all the little pits in the top surface. Both of these effects prevent water from infiltrating the pavement and then freezing in the winter (which would crack the pavement). Asphalt pavement, when first laid down, is a mixture of asphalt, gravel, and sand. It's not solid, though – in fact, it's rather porous. The sealer puts that waterproof layer on top...
Thursday, June 4, 2015
Anyone close to this guy...
Wednesday, June 3, 2015
Progress in Paradise...
Progress in Paradise... We drove up to Home Depot to get a few things we needed, and on the way up our neighbor (Tim D.) called us. It seems that a wandering driveway sealing guy was going house-to-house looking for customers. Tim is a retired paving supervisor for a large highway construction company; he knows this stuff inside and out. He'd used this guy in the past, and he'd done good work. Tim also knew that we were looking to get our driveway sealed, so he called us to make sure it was ok to sic this guy on our driveway. We said “Hell yes!” and while we were at Home Depot the fellow measured our driveway's area. He'll be back tomorrow morning to actually do the job: pressure-wash our driveway, then apply the sealer (hot pure asphalt, with no fillers of any kind). All for about 1/3 the price of a crappy sealing job (with no cleaning) in California. Sweet!
The imminent driveway sealing derailed me for the day, though – I had to run around like mad to move everything that was sitting on the pavement. That took a couple hours, and a lot of muscle work. But 'tis done!
Debbie, meanwhile, started actually installing the foam for the floor of her (soon-to-be) indoor agility court. As I write this, about half the foam is down, except for one skinny row near a wall. For that row, we've got to cut each “tile” before we lay it down. We do that with a hot knife: easy, but tedious and needing a steady hand. Another couple days and we'll have all that installed – and then there will be a couple of very happy dogs turned loose on this beautiful blue agility practice court!
The imminent driveway sealing derailed me for the day, though – I had to run around like mad to move everything that was sitting on the pavement. That took a couple hours, and a lot of muscle work. But 'tis done!
Debbie, meanwhile, started actually installing the foam for the floor of her (soon-to-be) indoor agility court. As I write this, about half the foam is down, except for one skinny row near a wall. For that row, we've got to cut each “tile” before we lay it down. We do that with a hot knife: easy, but tedious and needing a steady hand. Another couple days and we'll have all that installed – and then there will be a couple of very happy dogs turned loose on this beautiful blue agility practice court!
Flowers in Paradise...
Flowers in Paradise... These are all from our yard. The wild roses smell really good right now, all along the irrigation canal. The horticultural varieties of columbine, and the poppy, are far happier this year than they were last year – I suspect because of the three weeks of rains we had this year. That most likely means that if we were smart enough to irrigate them, we'd have them every year. But we're not that smart :)
Robins in Paradise...
Robins in Paradise... This is an update on the robin's nest we found in the half-dead tree in our front yard. They've (of course) grown a lot in just a couple days. There are still four babies...
The rise of creamy yogurt...
The rise of creamy yogurt... Well, here's another case where the U.S. is over 20 years behind Europe. Click the first link to read the article. The bottom line: U.S. yogurt manufacturers are starting to offer tastier yogurts made from whole milk (depending on where you live, that means 5% to 8% butterfat).
I first ran into these “full fat” yogurts on a trip to Estonia, while buying my lunch from a grocery store (a favorite mini-adventure of mine). The labels on the yogurts were mostly not in English, but I could make out the butterfat analysis on most of them anyway. Some of the German brands had butterfat contents as high as 18%! I still remember the first time I had one of those – a little container of German strawberry yogurt. It was to U.S. low-fat yogurt as Hagen-Daz is to ice milk. I thought my brains were going to fall out.
We still have a ways to go to hit that European yogurt yummy goodness. But any step along the way is bound to be better than what we used to have. I can hardly wait to find this in our local stores!
I first ran into these “full fat” yogurts on a trip to Estonia, while buying my lunch from a grocery store (a favorite mini-adventure of mine). The labels on the yogurts were mostly not in English, but I could make out the butterfat analysis on most of them anyway. Some of the German brands had butterfat contents as high as 18%! I still remember the first time I had one of those – a little container of German strawberry yogurt. It was to U.S. low-fat yogurt as Hagen-Daz is to ice milk. I thought my brains were going to fall out.
We still have a ways to go to hit that European yogurt yummy goodness. But any step along the way is bound to be better than what we used to have. I can hardly wait to find this in our local stores!
Hyperion...
Hyperion... As seen by the Cassini robotic spacecraft, as it approaches the end of its long and incredibly successful mission to explore Saturn and its moons. Via APOD, of course...
Quote of the day...
Quote of the day... This is from Starri Hedges, a Director at the Gaia Democratic School (a private school whose logo appears at right) in Minneapolis, Minnesota:
I'll bet they had fun, Starri :)
Sex education when I went to school consisted of a single session, perhaps 30 minutes long. The class was boys-only, there was a short film that taught me exactly nothing I didn't already know, and then the teacher (a gym teacher!) mumbled something about talking with our dads and seeing the school nurse “if we had a problem”. That was it. No field trips anywhere. I'm not sure if sex toy stores existed back in the '60s. I don't remember them.
What the hell is a progressive sex toy, anyway? Are they gender-neutral? Are they free for low income folks? Are they engraved with the collected wisdom of progressive thought-leaders (plenty of room on even the smallest sex toy for that!)? Or maybe it's just that the store makes a contribution to the Democrats when you buy an anatomically-correct “personal massage” device?
“It was certainly the first time we have taken that kind of field trip and it will probably be our last, which I feel bad [about] because the kids had so much fun.”The field trip she's referring to was for a dozen students of middle- and high-school age for a sex education class – to the Smitten Kitten, a “progressive sex toy” store.
I'll bet they had fun, Starri :)
Sex education when I went to school consisted of a single session, perhaps 30 minutes long. The class was boys-only, there was a short film that taught me exactly nothing I didn't already know, and then the teacher (a gym teacher!) mumbled something about talking with our dads and seeing the school nurse “if we had a problem”. That was it. No field trips anywhere. I'm not sure if sex toy stores existed back in the '60s. I don't remember them.
What the hell is a progressive sex toy, anyway? Are they gender-neutral? Are they free for low income folks? Are they engraved with the collected wisdom of progressive thought-leaders (plenty of room on even the smallest sex toy for that!)? Or maybe it's just that the store makes a contribution to the Democrats when you buy an anatomically-correct “personal massage” device?
I'm not a death penalty advocate...
I'm not a death penalty advocate... But there are stories that make me less certain of my position...
3.9%?
3.9%? According to this report (click first link) from the Wall Street Journal, that's the percentage of people who test positive for drugs on corporate drugs testing programs. That percentage has been declining for almost 20 years, but this year it went up.
Something to remember: these are the positives from people who knew they would be tested (though they might not know exactly when). You can bet that the actual percentage of drugs users is much higher, because basically everyone who cares about keeping their job would have stayed clean for the test.
Every time I see a test like this, I have to laugh at the impression it leaves. More recently, I also remember a casual conversation I had with an executive at a company I worked for (the company and the executive shall remain unnamed). I asked why the company didn't participate in drugs testing. He said “Because if we did, you’d be the only programmer here!” Hah! I don't think that's actually true – but I'd bet you it was a more accurate assessment than that 3.9% number. Just from incident observations and conversations, I'd guess the actual percentage at the last few companies I worked for was more like 50% to 60% (just counting illegal drugs), and I wouldn't be a bit surprised to find the number was actually 10% to 15% higher.
Since I worked with (primarily) engineers and executives, we're talking about a group of above average intelligence and function – which is enough to make anyone question the alleged brain and motivation destroying properties of casual drug use.
3.9% of American workers use illegal drugs? Don't you believe it! That number is far too low. It's still not as high as the (perfectly legal) use of alcohol, though – despite alcohol use having a much worse impact on workers...
Something to remember: these are the positives from people who knew they would be tested (though they might not know exactly when). You can bet that the actual percentage of drugs users is much higher, because basically everyone who cares about keeping their job would have stayed clean for the test.
Every time I see a test like this, I have to laugh at the impression it leaves. More recently, I also remember a casual conversation I had with an executive at a company I worked for (the company and the executive shall remain unnamed). I asked why the company didn't participate in drugs testing. He said “Because if we did, you’d be the only programmer here!” Hah! I don't think that's actually true – but I'd bet you it was a more accurate assessment than that 3.9% number. Just from incident observations and conversations, I'd guess the actual percentage at the last few companies I worked for was more like 50% to 60% (just counting illegal drugs), and I wouldn't be a bit surprised to find the number was actually 10% to 15% higher.
Since I worked with (primarily) engineers and executives, we're talking about a group of above average intelligence and function – which is enough to make anyone question the alleged brain and motivation destroying properties of casual drug use.
3.9% of American workers use illegal drugs? Don't you believe it! That number is far too low. It's still not as high as the (perfectly legal) use of alcohol, though – despite alcohol use having a much worse impact on workers...
Tuesday, June 2, 2015
Evening walkies in Paradise...
Evening walkies in Paradise... The sun is low, the temperature balmy, there's a slight breeze, the dogs are lazy, and we just slowly walked through the fields of alfalfa and drank in the views...
Shaper in Paradise...
Shaper in Paradise... My shaper is the last big piece of woodworking equipment that I'm planning to buy, at least until I learn what else I need (a standalone sander of some type is a distinct possibility). I received the shaper last week, but other project have kept me from finishing the assembly of it until today.
The photos below give you an idea what it's like to unpack and assemble a piece of equipment like this. The first photo shows what it looked like when I took the top of the crate off: a nicely milled cast iron surface, covered with a thick layer of grease. The second photo shows it with the crate completely removed. All the parts that had to be assembled (dozens of them) were packed inside the green cabinet, as you can glimpse in the third photo. The fourth photo shows all those parts after I extracted them. The fifth and sixth photos show a couple of stages during the assembly process, which is nearly all on the top of the machine.
The last two photos should have a title: “Really, Grizzly?” The next-to-last photo shows the angle meter (for the tilting spindle). Looks great. Except – in the last photo, you see the handle for raising and lowering the spindle installed. It completely covers the angle meter. Really, Grizzly? That's the best you can do? Fortunately, I suppose, I don't expect to be changing the spindle angle all that frequently. But ... when I do, I'll be partially disassembling my shaper just so I can read the angle! Jeez. I certainly expected better for a machine in this price range.
Aside from that one awesomely stupid design element (really, Grizzly?), I like what I see here. The cast iron table is heavy and very nicely made, the sliding part slide true and smoothly, the tilting spindle works great, and everything on the machine looks like it was built to withstand a nuclear assault. I haven't wired it up yet, so I haven't been able to actually run some wood through it.
While I've got the shaper itself completely assembled, I haven't yet assembled the rolling base I bought for it. That's a project for another day, along with wiring it up and lighting it off...
Really, Grizzly? Really?
The photos below give you an idea what it's like to unpack and assemble a piece of equipment like this. The first photo shows what it looked like when I took the top of the crate off: a nicely milled cast iron surface, covered with a thick layer of grease. The second photo shows it with the crate completely removed. All the parts that had to be assembled (dozens of them) were packed inside the green cabinet, as you can glimpse in the third photo. The fourth photo shows all those parts after I extracted them. The fifth and sixth photos show a couple of stages during the assembly process, which is nearly all on the top of the machine.
The last two photos should have a title: “Really, Grizzly?” The next-to-last photo shows the angle meter (for the tilting spindle). Looks great. Except – in the last photo, you see the handle for raising and lowering the spindle installed. It completely covers the angle meter. Really, Grizzly? That's the best you can do? Fortunately, I suppose, I don't expect to be changing the spindle angle all that frequently. But ... when I do, I'll be partially disassembling my shaper just so I can read the angle! Jeez. I certainly expected better for a machine in this price range.
Aside from that one awesomely stupid design element (really, Grizzly?), I like what I see here. The cast iron table is heavy and very nicely made, the sliding part slide true and smoothly, the tilting spindle works great, and everything on the machine looks like it was built to withstand a nuclear assault. I haven't wired it up yet, so I haven't been able to actually run some wood through it.
While I've got the shaper itself completely assembled, I haven't yet assembled the rolling base I bought for it. That's a project for another day, along with wiring it up and lighting it off...
Really, Grizzly? Really?
Subscribe to:
Posts (Atom)






