Thursday, April 30, 2015
Happy dogs in Paradise...
Happy dogs in Paradise... Race and Miki, captured by my lovely bride in their morning play-tussle. They do this almost every morning...
Where's our Nigel Farage?
Progress in Paradise...
Progress in Paradise... The fencing folks showed up yesterday, and started reconfiguring the post-and-rail fence in our back yard. We're turning it from a yard-and-paddock into a single bigger yard. They also started installing “goat wire” over the post-and-rail fence. This is sturdy wire with 6" square holes – small enough holes to keep the dogs in, rugged enough to keep them from destroying it, and large enough holes to allow our neighbor Tim D. to feed his irrigation pipes through to the risers inside the yard. I helped them for a bit, with our tractor – we lifted out the posts being removed, and loaded them onto their truck. Some of those posts were filled with concrete, and weighed close to 200 pounds.
In the early afternoon the fencing guys came to let me know that I had water erupting onto the field, from a point just south of our barn. To my great surprise, the Paradise pressurized irrigation water had been turned on! We weren't expecting it for at least another two weeks. One of the risers on the east/west line about 20' south of our barn had broken, and water was leaking out at a prodigious rate: a 3" line completely open. Just west of our barn, in a slight depression in the field, a small lake had formed. Yikes! I grabbed the valve “key” and took off on my ATV to the valve, which is a couple hundred yards west of our barn. I got it shut off in a jiffy. When that ground has dried out enough for me to dig, I've got a repair job. Dang.
I spent most of my day building a wagon kit. Not a child's wagon, but rather a pull-behind-the-ATV wagon with four-wheel steering. The kit I bought (see photo at right) is for the chassis. I managed to get the kit built, but it turned out to be practically an all-day affair. There were some challenges. First, it had been packaged quite poorly, and some of the tube ends were bent badly enough that parts wouldn't fit together. Some banging with a small sledge fixed that. Then one quite important bolt (the one that holds the hitch bar pivot) was too short by a half inch. Jeez. Off to the hardware store I went, and got a perfectly fitting replacement. Then later I found I was missing two bolts and a large washer. Back to the hardware store, where I found perfectly fitting substitutions. The final challenge was alignment of the steering system. There are six adjustable ends on the tie rods, and the must all be aligned correctly for the wagon to track correctly. The instructions (which were quite poor overall) gave no method for doing this. I came up with a way to use my laser level (which emits both a horizontal and vertical line) to do it: separately for the front and back, I lined up the axles and the pivot bar to the laser line, then adjusted the tie rod ends until they fit. That worked, but my previous two attempts did not. I burned a couple of hours on this. Next step: to build a stake-sided platform on top of that chassis. I'm planning to use this to collect brush and weeds, two things that we have her in large quantities :)
In the early afternoon the fencing guys came to let me know that I had water erupting onto the field, from a point just south of our barn. To my great surprise, the Paradise pressurized irrigation water had been turned on! We weren't expecting it for at least another two weeks. One of the risers on the east/west line about 20' south of our barn had broken, and water was leaking out at a prodigious rate: a 3" line completely open. Just west of our barn, in a slight depression in the field, a small lake had formed. Yikes! I grabbed the valve “key” and took off on my ATV to the valve, which is a couple hundred yards west of our barn. I got it shut off in a jiffy. When that ground has dried out enough for me to dig, I've got a repair job. Dang.
I spent most of my day building a wagon kit. Not a child's wagon, but rather a pull-behind-the-ATV wagon with four-wheel steering. The kit I bought (see photo at right) is for the chassis. I managed to get the kit built, but it turned out to be practically an all-day affair. There were some challenges. First, it had been packaged quite poorly, and some of the tube ends were bent badly enough that parts wouldn't fit together. Some banging with a small sledge fixed that. Then one quite important bolt (the one that holds the hitch bar pivot) was too short by a half inch. Jeez. Off to the hardware store I went, and got a perfectly fitting replacement. Then later I found I was missing two bolts and a large washer. Back to the hardware store, where I found perfectly fitting substitutions. The final challenge was alignment of the steering system. There are six adjustable ends on the tie rods, and the must all be aligned correctly for the wagon to track correctly. The instructions (which were quite poor overall) gave no method for doing this. I came up with a way to use my laser level (which emits both a horizontal and vertical line) to do it: separately for the front and back, I lined up the axles and the pivot bar to the laser line, then adjusted the tie rod ends until they fit. That worked, but my previous two attempts did not. I burned a couple of hours on this. Next step: to build a stake-sided platform on top of that chassis. I'm planning to use this to collect brush and weeds, two things that we have her in large quantities :)
This reminds me...
This reminds me ... of the “we need government to fix this” thinking that led to the War on Drugs, prohibition, and other experiments in liberty-threatening social engineering.
I can't for the life of me imagine how any adult believes that the same government that gave us the DMV, IRS, and innumerable other bloated and ineffective bureaucracies (not to mention Pelosi, Reid, McConnell, Holder, Cunningham, Rahm, De Blasio, etc.) is going to fix anything...
I can't for the life of me imagine how any adult believes that the same government that gave us the DMV, IRS, and innumerable other bloated and ineffective bureaucracies (not to mention Pelosi, Reid, McConnell, Holder, Cunningham, Rahm, De Blasio, etc.) is going to fix anything...
I have a different take...
I have a different take ... on the graphic at right. Its creators intended to show how cheap NASA is, and they're looking to double its budget.
Here's my take. Let's halve the NASA budget – but completely eliminate the manned space program (ISS and the alleged Mars mission). The result would be a vastly increased unmanned space program, with the rough equivalent of 10 James Webb telescope missions a year. The actual science done by NASA would explode, and the crazy expensive government-directed manned space program would be finished.
I should note that I don't believe that's the same thing as saying there will be no manned space program. Instead, I believe that means that if and when someone actually figures out a reason for humans in space, commercial interests (can you say SpaceX?) will get them there. Until that day, let's get our incompetent government out of this business...
Here's my take. Let's halve the NASA budget – but completely eliminate the manned space program (ISS and the alleged Mars mission). The result would be a vastly increased unmanned space program, with the rough equivalent of 10 James Webb telescope missions a year. The actual science done by NASA would explode, and the crazy expensive government-directed manned space program would be finished.
I should note that I don't believe that's the same thing as saying there will be no manned space program. Instead, I believe that means that if and when someone actually figures out a reason for humans in space, commercial interests (can you say SpaceX?) will get them there. Until that day, let's get our incompetent government out of this business...
My dad would have been intrigued by this...
My dad would have been intrigued by this... Retro-evolution in conifers...
40 years ago this week...
40 years ago this week ... I was a crew member on the USS Long Beach (CGN-9), and we were one of dozens of U.S. Navy ships positioned in the South China Sea, off the coast of South Vietnam. Saigon was falling to the North Vietnamese, and all Americans were being evacuated from the country. Many were flown by helicopter and small fixed-wing aircraft to carriers in our flotilla, as well as some ships with helicopter landing pads – including the ship I was on.
In addition to the Americans, thousands and thousands of South Vietnamese were also fleeing – in aircraft of every description, and boats of every size right down to inflatable dinghys. The ships in the flotilla, including mine, picked up large numbers of these refugees from boats. Some ships, especially the carriers, were also accepting the South Vietnamese aircraft. There was no room to store those aircraft, so they were simply pushed over the side. My ship accepted a few helicopters, and every one of them was pushed over the side. I was a member of one of the working parties that dumped those aircraft, just as you see in the photo above (that photo was taken on the USS Okinawa, another ship in the flotilla).
The ships involved, all told, rescued around 25,000 people in just a few days. It was a crazy, chaotic time – frantic, desperate people were everywhere. The ship was full of refugees, all terribly uncertain what their future held for them. The sea was full of boats, some filled with people; others abandoned. Flotsam was everywhere. The skies were full of aircraft, and those aircraft were not being controlled – every pilot was acting independently, and many of them were running low on fuel. There were accidents, and some people died or were injured – but the vast majority of those refugees were rescued successfully. The amount of military gear that went to the bottom of the South China Sea in those few days was simply staggering.
There are many amazing stories from that incident. Here's one that I first read today...
In addition to the Americans, thousands and thousands of South Vietnamese were also fleeing – in aircraft of every description, and boats of every size right down to inflatable dinghys. The ships in the flotilla, including mine, picked up large numbers of these refugees from boats. Some ships, especially the carriers, were also accepting the South Vietnamese aircraft. There was no room to store those aircraft, so they were simply pushed over the side. My ship accepted a few helicopters, and every one of them was pushed over the side. I was a member of one of the working parties that dumped those aircraft, just as you see in the photo above (that photo was taken on the USS Okinawa, another ship in the flotilla).
The ships involved, all told, rescued around 25,000 people in just a few days. It was a crazy, chaotic time – frantic, desperate people were everywhere. The ship was full of refugees, all terribly uncertain what their future held for them. The sea was full of boats, some filled with people; others abandoned. Flotsam was everywhere. The skies were full of aircraft, and those aircraft were not being controlled – every pilot was acting independently, and many of them were running low on fuel. There were accidents, and some people died or were injured – but the vast majority of those refugees were rescued successfully. The amount of military gear that went to the bottom of the South China Sea in those few days was simply staggering.
There are many amazing stories from that incident. Here's one that I first read today...
Wednesday, April 29, 2015
Some of the best (photo) shots you'll ever see...
Some of the best (photo) shots you'll ever see... Lots like the example at right. Via my lovely bride...
How to tell if your dog is involved in a sex scandal...
How to tell if your dog is involved in a sex scandal... Via my lovely bride, whose (dog owning) friends worry about such things...
This is for everyone who sends me those heart-warming BS stories...
This is for everyone who sends me those heart-warming BS stories... Via reader Simi L.:
In 1986, Peter Davies was on holiday in Kenya after graduating from Louisiana State University .
On a hike through the bush, he came across a young bull elephant standing with one leg raised in the air. The elephant seemed distressed, so Peter approached it very carefully. He got down on one knee, inspected the elephants foot, and found a large piece of wood deeply embedded in it. As carefully and as gently as he could, Peter worked the wood out with his knife, after which the elephant gingerly put down its foot.
The elephant turned to face the man and with a rather curious look on its face, stared at him for several tense moments. Peter stood frozen, thinking of nothing else but being trampled. Eventually the elephant trumpeted loudly, turned and walked away. Peter never forgot that elephant or the events of that day.
Twenty years later, Peter was walking through the Chicago Zoo with his teenaged son. As they approached the elephant enclosure, one of the creatures turned and walked over to near where Peter and his son Cameron were standing. The large bull elephant stared at Peter, lifted its front foot off the ground, then put it down. The elephant did that several times then trumpeted loudly, all the while staring at the man.
Remembering the encounter in 1986, Peter could not help wondering if this was the same elephant. Peter summoned up his courage, climbed over the railing and made his way into the enclosure. He walked right up to the elephant and stared back in wonder. The elephant trumpeted again, wrapped its trunk around one of Peter legs and slammed him against the railing, killing him instantly.
Probably wasn't the same elephant.
The conquering of poverty...
The conquering of poverty... My pistol-packing mama sent me a collection of “posters” (like the one at right) with factoids about how much the world has improved. While they were all interesting, this one in particular got my attention. The reduction in poverty is something I have personally witnessed over the course of my lifetime, thanks to two widely separated sets of travel around the world. In the '70s, as an enlisted man in the U.S. Navy, I saw lots of places all around the world, especially Asia, Africa, and Australia. Then in the '90s and '00s, as a business traveler, I saw a lot of those same places again, and Eastern Europe in particular.
The changes have been dramatic, almost incredibly so. The Philippines, North Africa, Eastern Africa, South Korea, China, India, Malaysia, Sri Lanka (Ceylon), and many more – all have been transformed from generally impoverished societies into vastly more developed societies. Their citizens are indisputably enormously better off than they were just 20 years earlier.
What accounts for this? Here's the part that drives the progressives and environmentalists crazy, because it's their enemy that has brought so much to these people. It's capitalism. Those countries have embraced different flavors of capitalism, aided by increased freedom of trade. Nothing else can lay claim to the progress that capitalism's incentives brings to human society. Nothing else even comes close. Say that out loud in any gathering and watch the lefties cringe. It's fun!
The changes have been dramatic, almost incredibly so. The Philippines, North Africa, Eastern Africa, South Korea, China, India, Malaysia, Sri Lanka (Ceylon), and many more – all have been transformed from generally impoverished societies into vastly more developed societies. Their citizens are indisputably enormously better off than they were just 20 years earlier.
What accounts for this? Here's the part that drives the progressives and environmentalists crazy, because it's their enemy that has brought so much to these people. It's capitalism. Those countries have embraced different flavors of capitalism, aided by increased freedom of trade. Nothing else can lay claim to the progress that capitalism's incentives brings to human society. Nothing else even comes close. Say that out loud in any gathering and watch the lefties cringe. It's fun!
Tuesday, April 28, 2015
Crazy people being crazy...
F-22 Raptor...
F-22 Raptor... Scary looking, no? That's a photo, not a painting.
If one of these was coming after me, I'd be thoroughly intimidated, just from its appearance!
If one of these was coming after me, I'd be thoroughly intimidated, just from its appearance!
Progress in Paradise...
Progress in Paradise... I forgot to mention yesterday that the barn painters showed up, to start work on the outside painting. It's warm enough now! They caulked and reset siding all around, and painted three coats of white on three sides – they ran out of time before getting to the west side. The barn is so bright now that it hurts your eyes to look at it :) The crew will be back next Monday and Tuesday to finish it all up, including the trim in my office.
I spent the day spraying, using the ATV to haul the sprayer around. The sprayer pump's electrical power is supplied by the ATV, through the 12V outlet I installed last week. It's a sweet setup compared with what I used last year, when I hauled the sprayer behind our riding mower. My biggest challenge with this rig is to make the ATV go slow enough – the thumb throttle is very sensitive. I just found a motorcycle-style twist throttle kit online, and ordered it – that should help a bit...
I used just under two gallons of 2,4-D concentrate today, spraying about five acres in total. That's our entire yard, the canal sides, field edges, and highway median strip. The whole job took about seven hours, three tank fillings (for 110 gallons of spray in total), and really very little physical labor. Nice! Most of the spraying I did with the three-nozzle bar sprayer on the back of my rig, which sprays an 8' wide swath. The bits that were so full of trees and shrubs that I couldn't drive the ATV on them, I sprayed with the wand. It's got a 12' hose that I'll probably replace with something longer. Most of the wand spraying I did from the ATV's seat, which felt like the height of spraying laziness. When I was a kid I helped my dad spray in customer's yards. He had a hand-pushed sprayer, heavy as hell, with a gas-powered pump (also heavy!). His sprayer was more powerful than mine, but oh man was it a lot of work. That memory is why my current rig feels lazy :)
The first photo below shows the bottom of the black willow that I cleaned out yesterday. I really need a before-and-after photo set here, but where you can see the trunks of the willow now was completely obscured by deadwood yesterday. Now the only thing blocking view of them are the roses. The middle photo was taken from the same spot, looking toward our house (just west of north). It's a beautiful spring day! The last photo is of a couple of bad dogs that followed me out on our morning walk. I had Mo'i on a leash as well (have to, because he can't hear our commands to come back!), but he wouldn't sit still for the photo...
I spent the day spraying, using the ATV to haul the sprayer around. The sprayer pump's electrical power is supplied by the ATV, through the 12V outlet I installed last week. It's a sweet setup compared with what I used last year, when I hauled the sprayer behind our riding mower. My biggest challenge with this rig is to make the ATV go slow enough – the thumb throttle is very sensitive. I just found a motorcycle-style twist throttle kit online, and ordered it – that should help a bit...
I used just under two gallons of 2,4-D concentrate today, spraying about five acres in total. That's our entire yard, the canal sides, field edges, and highway median strip. The whole job took about seven hours, three tank fillings (for 110 gallons of spray in total), and really very little physical labor. Nice! Most of the spraying I did with the three-nozzle bar sprayer on the back of my rig, which sprays an 8' wide swath. The bits that were so full of trees and shrubs that I couldn't drive the ATV on them, I sprayed with the wand. It's got a 12' hose that I'll probably replace with something longer. Most of the wand spraying I did from the ATV's seat, which felt like the height of spraying laziness. When I was a kid I helped my dad spray in customer's yards. He had a hand-pushed sprayer, heavy as hell, with a gas-powered pump (also heavy!). His sprayer was more powerful than mine, but oh man was it a lot of work. That memory is why my current rig feels lazy :)
The first photo below shows the bottom of the black willow that I cleaned out yesterday. I really need a before-and-after photo set here, but where you can see the trunks of the willow now was completely obscured by deadwood yesterday. Now the only thing blocking view of them are the roses. The middle photo was taken from the same spot, looking toward our house (just west of north). It's a beautiful spring day! The last photo is of a couple of bad dogs that followed me out on our morning walk. I had Mo'i on a leash as well (have to, because he can't hear our commands to come back!), but he wouldn't sit still for the photo...
Scale model B-29 and XS-1...
Thank you, Larry!
A hard day's work yesterday...
A hard day's work yesterday ... and I slept like the proverbial baby (my understanding is that the real babies don't actually sleep :). The weather hear yesterday couldn't have been nicer for hard physical work: mostly sunny, temperatures in the low 60s, and a nice breeze. I spent the day clearing out 30 years or so of dead wood from a clump of 60' high black willows. About half the wood was on the ground; the other half was dead branches I cut down with a hand saw (the Felco F610 shown at right). I also had some chainsaw work to do – once I got the bigger (4" to 10" diameter) branches on the ground, I used the chainsaw to saw them up into roughly 4' pieces to pile onto my tractor's fork for transport to my (now gigantic) brush pile).
I've used quite a few different pruning saws over the years, mainly those purchased at Home Depot or the like. I don't think I ever paid more than about $25 for one of them, and I thought they were fine – but they didn't last long. They either lost their sharpness, or the blade got bent on a push stroke, making the saw unusable. Last year I did a lot of pruning, cleaning up the pines and spruces in the yard of our new house. I went through three Home Depot pruning saws in a week (can you say "Frustrating!"?), and decided to try my dad's favorite brand of all things pruning: Felco. It cost over $50 for the saw above. What did I get for that? Well, first of all, I'm still using that saw, even after lots and lots of pruning last year. It's still sharp. No matter what I've done to it, I haven't managed to bend its blade. Best of all: the sawing effort is noticeably lower with this saw than with any other pruning saw I've owned, though I've no idea why. It's yet another demonstration of the value of a quality tool...
I've used quite a few different pruning saws over the years, mainly those purchased at Home Depot or the like. I don't think I ever paid more than about $25 for one of them, and I thought they were fine – but they didn't last long. They either lost their sharpness, or the blade got bent on a push stroke, making the saw unusable. Last year I did a lot of pruning, cleaning up the pines and spruces in the yard of our new house. I went through three Home Depot pruning saws in a week (can you say "Frustrating!"?), and decided to try my dad's favorite brand of all things pruning: Felco. It cost over $50 for the saw above. What did I get for that? Well, first of all, I'm still using that saw, even after lots and lots of pruning last year. It's still sharp. No matter what I've done to it, I haven't managed to bend its blade. Best of all: the sawing effort is noticeably lower with this saw than with any other pruning saw I've owned, though I've no idea why. It's yet another demonstration of the value of a quality tool...
Monday, April 27, 2015
You may wonder...
You may wonder ... what the graphic at right might be. An advertisement for hallucinogenic botanicals? A poster for a weird movie involving nude slashers? A recruiting poster for the Church of the Holy Lemon?
Nope. It's a campaign poster for Teruki Goto, who's running for mayor of Chiyoda, Japan (part of Tokyo). Seriously. No word on how he's doing in the polls...
Nope. It's a campaign poster for Teruki Goto, who's running for mayor of Chiyoda, Japan (part of Tokyo). Seriously. No word on how he's doing in the polls...
Subscribe to:
Posts (Atom)
.jpeg)





.jpeg)




