We still keep getting surprised ... at how different ordinary things are up here in Utah, as compared with our decades of experience in San Diego...
Yesterday Debbie had a doctor's appointment in the morning. The doctor she was to see is a physical rehabilitation specialist at the largest local hospital; the appointment was a followup from the emergency room visit she had a couple weeks ago. All very ordinary, the kind of thing we've been through quite a few times in the past.
In those past experiences – mainly in the San Diego area – we'd get to the office 15 or 30 minutes before our appointment, do some fiendish paperwork, then wait for the doctor to actually see us. Generally that would happen quite a bit later than the actual appointment, sometimes hours later. We'd experienced this so many times that we knew to come equipped with things to read, to while away the time.
That's not what happened yesterday morning. Instead, we were handed a very small pile of paperwork, some of which was actually entertaining (we had fun with a section asking about our “social life” and how Debbie's injury affected it). We finished with that in under five minutes, sat down, and about a minute later a nurse came back to take us to the exam room. Wow! Then she figured out that Debbie needed some more X-rays, so Debbie got dressed up in one of those spiffy hospital gowns (with a bonus pair of bloomers), and hauled off for X-rays. I wanted to take photos, but Debbie threatened me with a painful death if I did. So I settled down with my Kindle, figuring (based on past experience) that I had at least 45 minutes or so to wait. Four minutes later, Debbie was back in the exam room with me, X-rays finished. A minute or so after she got dressed, the doctor came in to see her. He'd already reviewed the history and X-rays, and immediately started the exam. The exam was thorough and unhurried, with even some time for small talk – a most unstressful and even pleasant experience. In the end had an uncertain diagnosis, but thought it likely that all she needed was some physical therapy – and we were done.
We walked out of his exam room just under one hour after we walked in the door. In that time we were put into the hospital's record system for the first time, had Debbie's history taken, got X-rays, saw the doctor, and got a prescription for physical therapy, pre-cleared by our insurance company. I don't know what your medical experiences have been like, but compared with our own past experiences, that's simply remarkable.
But the surprises weren't finished. We decided to make the physical therapy appointment (with a different clinic in the same hospital) right away – Debbie was really eager to get started. It's a big hospital, with some construction going on, so we were confused about where to go. We asked at a physical rehab clinic we saw a sign for, and were told where we should go. Then the receptionist asked us if we knew how to get there – and when we said “No!”, she promptly got up and led us on a five minute walk through two floors of the hospital to get us to the right place. A few minutes later, we had her first appointment scheduled – for later that same afternoon.
So yesterday afternoon we drove back up to the hospital and checked into the physical rehab facility. Again we got there early. Again we were handed a small pile of paperwork that we quickly worked through. And again, within a few seconds of finishing the paperwork we were taken back to the exam room. This time the physical therapist did another unhurried and thorough exam, with lots of particular tests to see if he could locate the source of Debbie's knee pain. It took about an hour, but eventually he nailed it down: she has an injured (or perhaps just irritated) illiotibial band. Treatment is some simple physical therapy, and the prognosis is complete recovery within 4 to 6 weeks. We've both been through excellent physical therapy before (though Debbie more than I), but this experience still stood out for the physical therapist's competence, persistence (Debbie's injury was hard to diagnose, and both the doctor and the physical therapist thought it might be a meniscus tear initially), and easy, encouraging manner. Once he figured out what the problem was, we settled on a course of treatment, and left to get it all scheduled.
The fellow who scheduled Debbie's PT appointments was a college student, and he mentioned that he'd spent two years in Lithuania. That caught my attention immediately, as Lithuania is one of the Baltic states, quite close to Estonia, which I know very well. We ended up having a great conversation about our mutual experiences there while we got Debbie all set up for PT.
An hour and a half after we walked in the door, we were walking back out to our truck. To get there, we walked through the physician's parking lot, and something struck me: amongst the 50 or so doctors' cars, there was exactly one car that could qualify as a “luxury” car – an older Mercedes. All the rest were perfectly ordinary cars and pickup trucks – an assortment of Toyotas, Chevys, Fords, etc. There wasn't a single Porsche, BMW, or Maserati on the lot.
Presumably, after we've lived here long enough, these sorts of experiences will stop surprising us. I wonder what it would feel like to go back to California at that point? Not good, I suspect...
Thursday, March 19, 2015
Wednesday, March 18, 2015
Morning ponder...
Morning ponder... Why do Israeli Jews vote overwhelmingly for the conservative candidate (Netanyahu), while U.S. Jews vote overwhelmingly for the Progressive candidates (Clinton, Gore, Kerry, Obama...)? Are conservative Jews more likely to emigrate to Israel? Is it the proximity and obviousness of the existential threat that radical Islam poses to Israel? Is it something in the U.S. water supply?
Tuesday, March 17, 2015
It's undeniably spring in Paradise..
It's undeniably spring in Paradise ... and a much earlier spring than even last year. As I write this, our willow's leaves are out, about 3/4" long. The roses along the canal just started popping leaves from their buds today. Several other trees in our yard look like they're ready to pop into leaf as well. Looking back on my blog posts from last year, that's just about the same state we were in on April 12. That means we're almost a month earlier this year, which validates all the locals' astonishment at our mild winter and early spring. Temperatures today were in the high 60s; it was just lovely outside.
I took possession of this house last April 3rd, just under a year ago. Though sometimes it seems like we're making slow progress, when I think back to what this house was like when I moved in and started “camping”, it's obvious we've actually accomplished quite a bit this past year...
I took possession of this house last April 3rd, just under a year ago. Though sometimes it seems like we're making slow progress, when I think back to what this house was like when I moved in and started “camping”, it's obvious we've actually accomplished quite a bit this past year...
By popular demand...
By popular demand... Well, ok, one reader asked – but that's a significant percentage of my readers! Here's a photo of the hardware card I wrote about yesterday, and also a photo of the table saw in its partly-assembled current state...
Monday, March 16, 2015
“Almost immediately, it became clear that we were all going to hate each other.”
“Almost immediately, it became clear that we were all going to hate each other.” The subject is “mom dates”.
Geek: unexpectedly difficult...
Geek: unexpectedly difficult... Every once in a while I've come across a problem that turns out to be far more difficult than it first appears. Most recently this happened to me with the need to produce GUIDs. I accidentally observed a GUID collision (that is, identical GUIDs being generated multiple times) in the system I was working on (which shall remain unnamed). That's the sort of thing that just isn't supposed to happen, so it got my attention. I tracked down the source of the collision by examining the algorithm used. It turns out that collisions were happening when multiple processes with identical GUID generators were being run on the same server – as we were doing in our datacenter, with some servers having over a hundred such processes. Under those conditions, collisions were likely to happen several times a day – very bad indeed. Fixing that was challenging, especially fixing it in a performant way.
This morning I stumbled across a discussion about another such problem: uniformly distributing random floats in [0,1] given a source of random bits. I knew, vaguely, that it wasn't exactly trivial – but it's definitely more challenging than I'd have guessed!
This morning I stumbled across a discussion about another such problem: uniformly distributing random floats in [0,1] given a source of random bits. I knew, vaguely, that it wasn't exactly trivial – but it's definitely more challenging than I'd have guessed!
Geek: fast, easy jump consistent hash...
Geek: fast, easy jump consistent hash... Next time I have a sharding problem, I'd like to try this. But now that I've retired, why on earth would sharding ever raise its head again?
Memory lane, geek edition...
Memory lane, geek edition... I stumbled across this 1999 paper on data structures for representing text sequences in editors. I love the idea of using a simulator to rank the data structure approaches!
All of the data structures it discusses are far older than that paper, and I've implemented many of them. In the late '70s I wrote a Basic interpreter that used a buffer for each line of the program. In the early '80s I wrote a text editor (in Pascal!) that used what the paper's author calls a “piece table” data structure that included a snapshot feature (not discussed in the paper, but an obvious enhancement).
I got the idea for that last by reverse-engineering a '70s program by MicroPro called WordMaster (manual) – a general purpose WYSIWYG text editor I used for programming. I was amazed by its ability to handle large text files, and I wanted to know how it worked. I reverse engineered enough of it to understand that it kept something like a piece table data structure, and that gave me the ideas I needed to write my own with the snapshot capability. The “gap” approach discussed in the paper is new to me, and I'm surprised its performance was as good as it was...
All of the data structures it discusses are far older than that paper, and I've implemented many of them. In the late '70s I wrote a Basic interpreter that used a buffer for each line of the program. In the early '80s I wrote a text editor (in Pascal!) that used what the paper's author calls a “piece table” data structure that included a snapshot feature (not discussed in the paper, but an obvious enhancement).
I got the idea for that last by reverse-engineering a '70s program by MicroPro called WordMaster (manual) – a general purpose WYSIWYG text editor I used for programming. I was amazed by its ability to handle large text files, and I wanted to know how it worked. I reverse engineered enough of it to understand that it kept something like a piece table data structure, and that gave me the ideas I needed to write my own with the snapshot capability. The “gap” approach discussed in the paper is new to me, and I'm surprised its performance was as good as it was...
Quote of the day...
Quote of the day... An employee of WBTV (Charlotte, North Carolina) said:
I feel the doom crushing down on my shoulders...
Read more here: http://www.charlotteobserver.com/entertainment/tv/media-scene-blog/article14423408.html#storylink=cpy
“This is a learning lesson for all and we hope this will never occur again.”She's talking about another employee who was caught whistling Dixie. Literally.
I feel the doom crushing down on my shoulders...
Read more here: http://www.charlotteobserver.com/entertainment/tv/media-scene-blog/article14423408.html#storylink=cpy
Sh
The table saw is out of the box...
The table saw is out of the box ... but its assembly is far from finished. The main box weighed about 250 pounds, a bit more than I could muscle around by myself. The box was on a pallet, and I'd plopped it down in the garage section of the barn after unloading it from the delivery truck. However, we conveniently built the door from the garage section to the woodshop section just barely large enough to drive my tractor into the woodshop. So I loaded the box back onto the tractor's fork lift yesterday, and carefully drove it right to it's designated location in the woodshop. It took about 50 “K” turns to get it in the right place, and about 50 more to get the tractor back out of the woodshop – but I did it, and without bashing down any walls or posts in the process :)
Unboxing the table saw was a much more interesting process than I expected. The overall experience reminded me a bit of unboxing an Apple product – one pleasant surprise after another. First I cut the straps and pulled off the lid, revealing a piece of molded foam about 30" x 50" in size. I pulled off the foam, and discovered its bottom side was elaborately molded with bosses (for strength) and cavities to fit various things packed underneath it. The main part of the saw was packed on its side, with its cast iron top swaddled in heavy wax paper to cover the protective grease underneath it, and the entire saw covered in shrink wrap. Other components were boxed or wrapped in bubble wrap, with everything very carefully separated by some kind of shock absorbing material (several kinds were employed).
On the very top, prominently showing, was a single sheet of paper with detailed diagrams and explanation showing exactly how to remove the saw without damaging it. This was particularly nicely done. The first step was to remove the remaining box and other components. One of the things I pulled out was a large, colorfully printed piece of stiff cardboard, covered with plastic that had bubbles in it to hold various bits of hardware needed to put the saw together, along with some special tools (like metric Allen keys). This piece of cardboard was a delight to examine – someone went to a great deal of trouble to make my life easier! The colors are a form of coding to help identify each piece of hardware. Text in each colored section explained what the hardware was. Behind each bubble the cardboard was scored to make it easy to remove the hardware. I've assembled lots of kits like this one, but never one in which the hardware was so easy to locate and identify. Very nice job, SawStop. Very nice indeed.
After I removed everything except the base saw, I had about 150 pounds to muscle around – not so bad, especially since all I had to do was roll it and tilt it up. I followed the (excellent) directions, and in very short order I had stood up the table saw in its new home. It was getting toward the end of my day, so I didn't do much more work on it – just cleaned the grease off the cast iron tabletop, installed the two hand wheels (also cast iron, and beautifully made) and the motor cover. Today I'll tackle the rest of it...
Unboxing the table saw was a much more interesting process than I expected. The overall experience reminded me a bit of unboxing an Apple product – one pleasant surprise after another. First I cut the straps and pulled off the lid, revealing a piece of molded foam about 30" x 50" in size. I pulled off the foam, and discovered its bottom side was elaborately molded with bosses (for strength) and cavities to fit various things packed underneath it. The main part of the saw was packed on its side, with its cast iron top swaddled in heavy wax paper to cover the protective grease underneath it, and the entire saw covered in shrink wrap. Other components were boxed or wrapped in bubble wrap, with everything very carefully separated by some kind of shock absorbing material (several kinds were employed).
On the very top, prominently showing, was a single sheet of paper with detailed diagrams and explanation showing exactly how to remove the saw without damaging it. This was particularly nicely done. The first step was to remove the remaining box and other components. One of the things I pulled out was a large, colorfully printed piece of stiff cardboard, covered with plastic that had bubbles in it to hold various bits of hardware needed to put the saw together, along with some special tools (like metric Allen keys). This piece of cardboard was a delight to examine – someone went to a great deal of trouble to make my life easier! The colors are a form of coding to help identify each piece of hardware. Text in each colored section explained what the hardware was. Behind each bubble the cardboard was scored to make it easy to remove the hardware. I've assembled lots of kits like this one, but never one in which the hardware was so easy to locate and identify. Very nice job, SawStop. Very nice indeed.
After I removed everything except the base saw, I had about 150 pounds to muscle around – not so bad, especially since all I had to do was roll it and tilt it up. I followed the (excellent) directions, and in very short order I had stood up the table saw in its new home. It was getting toward the end of my day, so I didn't do much more work on it – just cleaned the grease off the cast iron tabletop, installed the two hand wheels (also cast iron, and beautifully made) and the motor cover. Today I'll tackle the rest of it...
Sunday, March 15, 2015
State of the dust collector...
State of the dust collector... The left photo below shows the partly assembled dust collector, lying on its side like a crippled minnow. The large cylinder in the left foreground is the HEPA filter for the beast, and the smaller cylinder in the background is the sawdust/chip collector. Both of these will be attached once the beast is raised upright. The right photo shows the variety of small parts that remain to be attached...
Spent the morning picking old caulking...
Spent the morning picking old caulking ... out of the seam between our kitchen sink and the granite above it. This was the old fashioned translucent silicone caulking, which is a bit of a pain to remove. The previous caulking job was pretty bad – the caulking wasn't all under the granite; a sheet of it crept over the stainless steel sink. Over the years since it was installed, the thin parts had worked loose from the stainless steel, and colonies of alien bacteria lived on the trash and dirty water that had infiltrated.
I picked all that out with a dental pick, then used steel wool and a lot of elbow grease to get the film of translucent silicone off. That was surprisingly difficult! I also used steel wool on the sink itself, followed by a course of Barkeeper's Friend (the best stuff I've ever used for cleaning metal); this cleaned and shined up the sink nicely.
Then I re-caulked with modern, water-clear silicone – and kept the bead completely under the granite. I finished it using a trick I learned from the guys who installed our bathroom granite: I spritzed the bead with half water/half isopropyl alcohol, then just ran my finger down the bead. Perfect finish! The face of the caulk bead is basically vertical. When it's cured (tomorrow), I'll get rid of any films of silicone remaining on the stainless steel – and then the kitchen sink will be completely finished!
I picked all that out with a dental pick, then used steel wool and a lot of elbow grease to get the film of translucent silicone off. That was surprisingly difficult! I also used steel wool on the sink itself, followed by a course of Barkeeper's Friend (the best stuff I've ever used for cleaning metal); this cleaned and shined up the sink nicely.
Then I re-caulked with modern, water-clear silicone – and kept the bead completely under the granite. I finished it using a trick I learned from the guys who installed our bathroom granite: I spritzed the bead with half water/half isopropyl alcohol, then just ran my finger down the bead. Perfect finish! The face of the caulk bead is basically vertical. When it's cured (tomorrow), I'll get rid of any films of silicone remaining on the stainless steel – and then the kitchen sink will be completely finished!
Well, it took all day...
Well, it took all day... And also four trips to Ace Hardware and Home Depot, and the deployment of an extensive vocabulary of words not often heard in areas so dominated by the LDS church. I removed all the old kitchen sink plumbing, including the garbage disposal, an under-sink “instant” hot water heater that we never used, all three faucets, and the broken hand soap dispenser. I then installed a new garbage disposal, new sink drain, and all new plumbing. Along the way I discovered that virtually nothing under the sink was done in a standard way (the norm for this house, it seems), so several of my trips were to obtain various adapters to make non-standard plumbing play nice with the bog standard new stuff that I bought.
The end result, though, we're very happy with. The new faucet (and matching hand soap dispenser) are beautifully made Kohler models. They feel rock solid, and operate just as you'd expect. The pull-down spray head works great; goes in and out easily, and the hose is quite limp and flexible. The new garbage disposal is so quiet compared with the old one that when I first tested it, I thought it was broken! That's despite being twice as powerful.
One sink-related task remains for today: I'm going to strip out all the old caulking (it's an under-counter sink, caulked to the bottom of the surrounding granite) and put new in. That means a fifth trip, this time to Home Depot to get some decent grout, hopefully in a color that will blend nicely. I'm also going to use steel wool to thoroughly clean the sink itself, as now it's old grungy appearance contrasts badly with the nice new faucet :)
The end result, though, we're very happy with. The new faucet (and matching hand soap dispenser) are beautifully made Kohler models. They feel rock solid, and operate just as you'd expect. The pull-down spray head works great; goes in and out easily, and the hose is quite limp and flexible. The new garbage disposal is so quiet compared with the old one that when I first tested it, I thought it was broken! That's despite being twice as powerful.
One sink-related task remains for today: I'm going to strip out all the old caulking (it's an under-counter sink, caulked to the bottom of the surrounding granite) and put new in. That means a fifth trip, this time to Home Depot to get some decent grout, hopefully in a color that will blend nicely. I'm also going to use steel wool to thoroughly clean the sink itself, as now it's old grungy appearance contrasts badly with the nice new faucet :)
Saturday, March 14, 2015
Hillary's email...
Hillary's email... The latest revelation is that the State Department didn't actually archive the emails that Hillary sent to other State Department employees. Nor did they archive anybody else's.
Everyone I know with any sort of IT background shares my reaction to the news reporting on this issue: it's all complete nonsense, credulously reporting the State Department's assertions that this is a difficult problem only recently addressed. That's the sheerest poppycock and twaddle. Specialized email backup programs have been readily available commercially, and routinely used by private organizations, since at least the late 1980s – almost thirty years ago. I personally selected and acquired such a system for my then-employer in the mid-1990s. These backup systems save every email (no selection is required) and then provide tools for recovery of particular (or all) emails.
For the State Department (or any branch of government) to assert that this is difficult, time-consuming, or expensive is one of two things: an outright lie, or a confirmation of an almost unimaginable level of incompetence.
Occam's Razor says: it's a lie.
But why would the State Department lie about this, making themselves look stupid and ignorant? The most likely reason I can imagine is that if they actually produced copies of their internal emails, it would expose them as the utterly incompetent fools and nefarious knaves the electorate suspects they are...
Everyone I know with any sort of IT background shares my reaction to the news reporting on this issue: it's all complete nonsense, credulously reporting the State Department's assertions that this is a difficult problem only recently addressed. That's the sheerest poppycock and twaddle. Specialized email backup programs have been readily available commercially, and routinely used by private organizations, since at least the late 1980s – almost thirty years ago. I personally selected and acquired such a system for my then-employer in the mid-1990s. These backup systems save every email (no selection is required) and then provide tools for recovery of particular (or all) emails.
For the State Department (or any branch of government) to assert that this is difficult, time-consuming, or expensive is one of two things: an outright lie, or a confirmation of an almost unimaginable level of incompetence.
Occam's Razor says: it's a lie.
But why would the State Department lie about this, making themselves look stupid and ignorant? The most likely reason I can imagine is that if they actually produced copies of their internal emails, it would expose them as the utterly incompetent fools and nefarious knaves the electorate suspects they are...
Dinner out...
Dinner out... We went to Cafe Sabor last night for a nice outing. The salsa and chips were just as good as on our previous visits. Debbie had their tortilla soup (ok, not great – she says the coconut soup she had last time was much better), and the blackened shrimp tostada (also ok, not great). Debbie's meal is in the photo at right – as you can see, the food was quite attractive, especially the tostada at left. I had a chile relleno (outstanding!) and a sweet pork enchilada (very good, though odd). By the time I thought to take a photo of it, I'd already eaten half of it :) We ordered flan for dessert, and it was more like an eggy bread pudding (with one piece of bread) than a traditional flan (which should be a slightly overcooked custard).
The drive home in the late evening light was especially pretty. The mountains around the valley were glowing in the reddish light of near-sunset, while the valley was mainly in shadow. There were quite a few dramatically-lit scenes along the way. Just south of Hyrum, on the east side of Highway 165, there's a small farm that's recently acquired a bunch of baby goats. They were out playing “king of the hill” on a pile of giant wooden telephone wire spools. I could watch baby goats for hours. It's too bad they're only babies for about ten minutes – and then grow up to be extremely uncute goats...
The drive home in the late evening light was especially pretty. The mountains around the valley were glowing in the reddish light of near-sunset, while the valley was mainly in shadow. There were quite a few dramatically-lit scenes along the way. Just south of Hyrum, on the east side of Highway 165, there's a small farm that's recently acquired a bunch of baby goats. They were out playing “king of the hill” on a pile of giant wooden telephone wire spools. I could watch baby goats for hours. It's too bad they're only babies for about ten minutes – and then grow up to be extremely uncute goats...
Barn progress...
Barn progress... I spent most of the day yesterday assembling the stand and about half of the Grizzly dust collection system. By the end of the day, I had roughly 400 pounds of steel and copper assembled and lying sideways on my barn floor. Next step: raising it to a vertical position. That's going to have to wait for a few days, though, as I discovered during assembly that the stand doesn't actually come with feet. That's because the usual method of mounting it to a concrete floor is to use fasteners in holes drilled in the floor. That won't work for me, as I have heating tubes embedded in the concrete floor – and I'd really, really hate to hit one of those! So I had to order some rubber-and-steel “machine mounts” (essentially, industrial-strength, 5" diameter rubber feet) designed for sitting this monster on a wood floor. They'll be here early next week. Meanwhile, the monster shall recline in a resting position :)
The two shipments due to arrive yesterday did arrive. We now have two pallets full of foam flooring for Debbie's agility court. My SawStop table saw also arrived, in a collection of sturdy boxes strapped to another pallet. The garage area of our barn is starting to look like a warehouse!
Today is “sink day” – I'm replacing the faucet, garbage disposal, drains, strainer, and under-sink plumbing on our kitchen sink. The immediate provocation was an annoying, persistent, and unrepairable leak in the existing faucet. The secondary provocation was a desire to get a more powerful garbage disposal (1 HP model replacing an aging 1/2 HP model) and to remove an “instant on” hot water heater that we never use. I bought all the parts I thought I needed earlier this week, but as I start the actual work I fully expect to discover 12 more things I need, necessitating at least 8 more trips to Home Depot and/or Lowe's...
The two shipments due to arrive yesterday did arrive. We now have two pallets full of foam flooring for Debbie's agility court. My SawStop table saw also arrived, in a collection of sturdy boxes strapped to another pallet. The garage area of our barn is starting to look like a warehouse!
Today is “sink day” – I'm replacing the faucet, garbage disposal, drains, strainer, and under-sink plumbing on our kitchen sink. The immediate provocation was an annoying, persistent, and unrepairable leak in the existing faucet. The secondary provocation was a desire to get a more powerful garbage disposal (1 HP model replacing an aging 1/2 HP model) and to remove an “instant on” hot water heater that we never use. I bought all the parts I thought I needed earlier this week, but as I start the actual work I fully expect to discover 12 more things I need, necessitating at least 8 more trips to Home Depot and/or Lowe's...
Subscribe to:
Posts (Atom)





