Friday, March 13, 2015

The hazards of open source programming, part 692...

The hazards of open source programming, part 692...  This is from the SQLite project.  Click to embiggen...

Barn progress...

Barn progress...  So I did finish wiring all the lights in the garage section of the barn yesterday ...  and boy howdy is it nice and bright in there now when I flip the switch on!  There are 12 “100 watt” LED bulbs in there.  The LED bulb manufacturers have taken to specifying the light output of their devices in terms of incandescent bulb equivalents.  I guess the American public just isn't sufficiently acquainted with actual units of light brightness (usually lumens).  The specified power consumption of these LED bulbs is 17.5 watts each, or 210 watts total.  I measured it at 196 watts, or just under one sixth of the power it would have taken to achieve the same brightness with old fashioned incandescent bulbs.  Actually, if I couldn't have obtained LED bulbs, I would have used halogen bulbs, and they'd have used about 1,000 watts to get the same brightness.  I detest the CFL bulbs and would never have considered using them.

Next up on the wiring front: 30 more LED lamp fixtures for the two other “rooms” on the first floor of the barn.  Parts are on order for them.

I had a few hours left yesterday after finishing the wiring, so I started assembling my new Grizzly dust collection system.  First step was to unpack the entire unit and inventory the (hundreds of) parts, and that took me nearly an hour.  The packaging of all these odd shaped parts was done in a very clever manner to reduce the total volume.  Some of the tricks took me a while to reverse-engineer so I could figure out how to get the parts separated.  My hat is off to the ingenious packaging engineer who came up with the dozen or so key elements of the packaging.  Not only did it reduce the volume tremendously, it also securely protected anything that was even slightly vulnerable.  The pallet weighed 494 pounds, and there isn't a ding, scratch, or even a little mark anywhere on anything.  Very impressive!

I haven't got very far on the assembly yet, but what I've done so far shows this thing to be a real beast.  I'm putting the stand together, and it's made out of very heavy gauge steel, beautifully powder coated.  It looks like something you'd see in an industrial setting.  Once I get this monster assembled and wired up, then I have to install 8 inch diameter ducting to the major pieces of equipment (most especially the table saw).  For smaller tools I can run 6 inch or even 4 inch ducting.  It will be interesting to see how all this works out!

Thursday, March 12, 2015

A couple more paintings...

A couple more paintings...  These are by friend, reader, and former colleague Larry E...


Shoelaces...

Shoelaces...  Friend, reader, and former colleague Simon M. passes along this site he stumbled across that's all about shoelaces.  Tagline:
Ian's Shoelace Site - Bringing you the fun, fashion & science of shoelaces
Some of the stuff there looks genuinely useful.  Most of it is far more about shoelaces than I ever wanted to know :)

The site was created by Ian Fieggen, the self-styled “Professor Shoelace”.  He has written a book (“Laces”, now out of print), and has apps about lacing for iPhones and Droids.  He apparently now supports himself through the web site and apps.  Oh, and did I mention that he's Australian (as is Simon)?

Big rocket test fired...

Big rocket test fired ... not far from here, just yesterday.  This test occurred at the Orbital ATK test facility in Promontory, Utah – about 40 miles west of our house.  The rocket being tested is intended for the SRS manned missions, so a great deal of money is being spent on it – all wasted so far as I'm concerned.  I'd much rather see that money spent on robotic missions launched by competitive commercial systems.  Still, it's one hell of a spectacle...

Comet 67P...

Comet 67P ... in a recent photo taken by Rosetta.  It's outgassing like crazy now...

Pi is a metaphor for the unexplained...

Pi is a metaphor for the unexplained...  An interesting piece on why we're all fascinated by the constant π.  One thing is very evident from that article: some of us are way more fascinated than others :)

Consumer Reports is anti-science...

Consumer Reports is anti-science...  On GMOs, at least.  I cancelled my subscription to Consumer Reports over 25 years ago, when I discovered that they use undisclosed non-objective factors in their rankings (things like “greenness” and political correctness).  I've disregarded their ratings ever since...

Glowing vegetables...

Glowing vegetables...  A collection of photos of ordinary vegetables lit from the inside...

Training with an Osprey...

Training with an Osprey...

Utah House defeats “Tesla” bill...

Utah House defeats “Tesla” bill...  HB 394 would have cleared the way for Tesla to sell cars directly to Utah residents, but it was defeated on Tuesday.  There were two major drivers for its defeat, one openly discussed, the other not so much.

The in-the-open reason was the fear that sales taxes from new car sales would decline.  This is at least a real issue, but it illustrates nicely the inertia of an established tax.  Once something is taxed and there's a dependency on the “revenue” from that tax, then it becomes very, very hard to do anything that would disturb that tax. 

The not-so-open reason for the bill's defeat is the fact that the auto dealership lobby (which is vehemently opposed to direct sales of new cars) contributes a great deal of money to politician's campaign funds.  There's nothing illegal or surprising about this; they're doing the same thing any business would do to protect their own interests.  Politicians are perennially searching for campaign funds, so naturally they're going to think twice about pissing off a major contributor.

If we want a Tesla, it looks like we'll have to travel to Nevada or Idaho to buy it, or else arrange for delivery here.  I've already informed my state legislators that their vote on this issue will be remembered come election time.  Apparently I have no pull :)

Barn progress...

Barn progress...  I installed about half the lights in the garage section of the barn yesterday (6 of 11); I should be able to finish the rest of those today.  While I was doing that wiring, a building supply delivery truck showed up, bringing the wallboard and “mud” for my future office on the second floor of the barn.  The builder will be here early next week to actually do the work.

The truck had a particularly long boom crane on it, designed to allow the delivery of heavy construction products up to five stories high, or 45' away from the truck horizontally.  The photo at right (click to embiggen) shows the crane partially extended to deliver our wallboard.  The crane operator used a belt-mounted remote control.  This let him stand right where he wanted it to go, and then guide it in very precisely.  The two guys on the truck humped all that wallboard up my stairs to the second floor.  They were wishing I had bigger windows so that they could have used the crane :)

Later in the day, a Fedex freight truck showed up with a 494 pound pallet full of my new Grizzly dust collection system.  Naturally it's a giant kit, with hundreds of parts.  I unpacked it all (see photo at left) to make sure nothing was damaged in shipping.  That thing is built like the proverbial tank – if any damage occurred, I'm certain it was on whatever the box hit, not on the dust collection system itself!  The system is far larger than I was imagining.  Assembling is going to pose some interesting challenges for this one-man operation.  The motor/impeller assembly weighs about 180 pounds, and it needs to be hoisted to the top of a six or seven foot high device – I'm going to have to get some local muscle to help, or come up with some sort of hoist.  One possibility: I can drive my tractor into the workshop, so I may be able to lift the assembly with the loader.  Or I could mount a block to the roof, then pull it up with the tractor.  What fun! 

Wednesday, March 11, 2015

“I was stunned. I didn’t know what to say.”

“I was stunned.  I didn’t know what to say.”  And neither do I.  On what planet does this make sense???

More guns ≠ more crime...

More guns ≠ more crime...  Criminologist Gary Kleck – no stranger to controversy he – has published a new study debunking the trope that more guns cause more crime.  It's sure to twist progressive knickers...

Volcano under the stars...

Volcano under the stars...  Via APOD, of course...

Speechless, I am...

Speechless, I am...  USB typewriters.  I had thought that the faddish attraction to vacuum tube amplifiers was the ultimate expression of this particular type of insanity – but I think a USB typewriter (at prices approaching $1,000!) eclipses even that...

Strange nonchaotic attractors in the heavens...

Strange nonchaotic attractors in the heavens...  Spotted in the strange pulsations of a distant variable star...

Quote of the day...

Quote of the day...  From Strategy Page:
The accountants always win in the end.
Read the details of how ISIS is disintegrating from within.  It's encouraging, and gives a good explanation of how air power actually does have a good chance of bringing ISIS down (and accountants figure in this).  At the very least it should dramatically weaken them; in the best case it will defeat them...

Powerful photos...

Powerful photos...  Thirty-one, including the one at right which had me in tears the first time I saw it years ago...

Photos from the window seat of an airplane...

Photos from the window seat of an airplane...  Twenty-seven beauties like the one at right!