RIP, Lea... This morning Lea looked miserable, and had some worrisome symptoms, so we ran her to the veterinarian early this morning. For some time now, we've been taking things day-by-day with her, managing the tension between not wanting her to be in pain or to be miserable, and the desire to keep her with us forever. She's been a wonderful companion to us for 17 years.
After the vet (Dr. Andrea Russell) examined her, it was clear that poor Lea was in the process of dying, and there weren't going to be any more good moments for her. Her oral tumor had increased in size significantly since just Friday, she had colitis (or something similar), her heart rate was very high, and she had a fever. We asked Dr. Russell for forthright advice, and we got it – very much appreciated by us, as these decisions are always hard. We decided that it was time to say goodbye to our girl.
The euthanasia process went smoothly. We held her as she closed her eyes for the final time.
We've known this day wasn't too far away for the past year, but that still doesn't make it any easier. Debbie and I are tearful, and I've got a lump in my throat that just won't go away. It's awful losing someone you love, whether two-legged or four-legged...
Tuesday, December 23, 2014
Garner's death and the murder of two New York police...
Garner's death and the murder of two New York police... My thoughts and feelings on these subjects are complicated, and difficult to write about – which is exactly why I've said nothing to this point. I just read a post (including the comments) by Eric Raymond, in which Raymond's thinking and conclusions exactly mirror my own – except that the writing, as usual for Raymond, is exceptional crisp and clear. Highly recommended reading...
How interesting...
How interesting... What do these people have in common?
Nah, can't be :)
Rush Limbaugh, Condi Rice, Mark Steyn, Antonin Scalia, Michelle Malkin, Charles Krauthammer, Mia Love, Scott Walker, Clarence Thomas, and Thomas SowellThey are the most admired conservative people, according to this survey of conservative web sites. While I don't fit the “conservative” label very well, I have much common ground with all of them, in various degrees I admire them all. So I'm a bit surprised at the survey results, as generally the establishment conservatives (Jeb Bush, Boehner, McConnell) are not on my most-admired list. Is it possible that my views are more mainstream than I thought?
Nah, can't be :)
Snow!
Snow! Yesterday afternoon it started to snow – at first a wet, slushy snow, but then the temperature dropped and we got something a bit fluffier. Last night the temperature dropped to just 14°F (where it still is), and now there's a coat of ice on the ground, covered by crunchy snow. The skies are clear at the moment, though it's supposed to cloud up and start snowing again before Christmas Day.
Taking the dogs out into the cold and snow was fun. The two older dogs (Mo'i and Lea) perked up and eagerly smelled everything in reach. There must be something about this weather that enhances their sense of smell, because they're behaving much like they do when it's damp (which definitely enhances their sense of smell). It made me smile to see those two enjoying this new home so much. We weren't sure they'd make it here, but I'm awfully glad they did. The two “boys” – Miki and Race – basically lost their minds in the snow. I had them on-leash, and it was all I could do to stay upright as they yanked me in several directions at once. Miki was busy chasing down voles, sniffing down their snow-covered trails. Several times he plowed up a furrow of snow as he ran with his nose skimming the ground. Once he decided to roll around on his back; why, I have no idea. Race acted like he'd completely lost what few marbles he had in the first place – running around randomly, jumping for joy, and teasing Miki. He clearly loves the snow and cold!
Once it's light out, and has warmed up at least a bit, I'm going to go fire up the tractor and cover the exposed bits of water pipe (the ends and junctions, basically). I'll be bundling up good for that job :)
Taking the dogs out into the cold and snow was fun. The two older dogs (Mo'i and Lea) perked up and eagerly smelled everything in reach. There must be something about this weather that enhances their sense of smell, because they're behaving much like they do when it's damp (which definitely enhances their sense of smell). It made me smile to see those two enjoying this new home so much. We weren't sure they'd make it here, but I'm awfully glad they did. The two “boys” – Miki and Race – basically lost their minds in the snow. I had them on-leash, and it was all I could do to stay upright as they yanked me in several directions at once. Miki was busy chasing down voles, sniffing down their snow-covered trails. Several times he plowed up a furrow of snow as he ran with his nose skimming the ground. Once he decided to roll around on his back; why, I have no idea. Race acted like he'd completely lost what few marbles he had in the first place – running around randomly, jumping for joy, and teasing Miki. He clearly loves the snow and cold!
Once it's light out, and has warmed up at least a bit, I'm going to go fire up the tractor and cover the exposed bits of water pipe (the ends and junctions, basically). I'll be bundling up good for that job :)
Progress report...
Progress report... Our builder worked inside the barn yesterday morning, finishing the sheathing of the ceiling. This means that the insulation folks can come finish insulating the first floor, and they will be here today. The plumber came in the afternoon, and finished all the heating installation, including connecting the gas (finally!) and water from the house. Today I'll be firing up the tractor to cover the remaining exposed ends of water line – and this afternoon we should be able to light off the heating system for the first time. Woo hoo!
Debbie and I did a bunch of work inside the house yesterday. Probably the most important thing: I replaced the front door hardware. The old hardware was badly worn, and it took almost superhuman force to open the door from the outside. That's really bad if it's cold and you want in! The new hardware works ever so much better. Then we assembled a closet organizer for Debbie's walk-in closet. This is the second product we've purchased that's made by Seville Classics (the first was a roll-around tool closet), and we're impressed once again. The thing is reasonably priced, but but beautifully made and as solid as a rock. It's not obvious from the photos, but the general design is similar to a “bread rack” adjustable shelving system – inherently simple and strong. With the addition of this unit, Debbie's closet has the storage capacity of a clothing super-store. In other works, about half what she “needs”. She'll be happier when my small corner has been deeded over to her, a happy (for her!) even that will occur when our dresser arrives...
Debbie and I did a bunch of work inside the house yesterday. Probably the most important thing: I replaced the front door hardware. The old hardware was badly worn, and it took almost superhuman force to open the door from the outside. That's really bad if it's cold and you want in! The new hardware works ever so much better. Then we assembled a closet organizer for Debbie's walk-in closet. This is the second product we've purchased that's made by Seville Classics (the first was a roll-around tool closet), and we're impressed once again. The thing is reasonably priced, but but beautifully made and as solid as a rock. It's not obvious from the photos, but the general design is similar to a “bread rack” adjustable shelving system – inherently simple and strong. With the addition of this unit, Debbie's closet has the storage capacity of a clothing super-store. In other works, about half what she “needs”. She'll be happier when my small corner has been deeded over to her, a happy (for her!) even that will occur when our dresser arrives...
Monday, December 22, 2014
“This one’s for you, Mom.”
“This one’s for you, Mom.” Scott Adams (the Dilbert cartoonist) with a lovely post about a very special chair – the one at right...
Intel 1405A...
Intel 1405A... One of my earliest digital designs was for a video board. It used a character generator ROM and 14 of those Intel 1405A shift register memories to provide a 7 bit wide, 1024 character memory to store the 16 lines of 64 characters. By today's standards it was laughably primitive. By the standards of 1975, when I built it, it was like something out of science fiction. I found those 1405A parts in the back of one of the early computer hobbyist journals (it may actually have been TCH) at a discounted price. That find inspired me to design and build that video board, copying many ideas from one of Don Lancaster's cookbooks. I built the entire thing with wire-wrap, with the board being roughly 10" x 6". When I finally got that thing working, you could hear me whooping and hollering for miles :)
$1.3B for zero results...
$1.3B for zero results... Your tax dollars are hard at work, guided by the smartest, most transparent government evah!
Sunday, December 21, 2014
Lea update...
Lea update... The old girl is still hanging in there. Her mornings seem to be worse, in general, than her evenings. Since my last report there have been several walks where she still had a little spring in her step, still eagerly smelled her peemail, replying to every one, and tracked down all the rodent trails she ran across...
Adult truths...
Adult truths... Via reader Simi L. My belly still hurts from laughing :)
1. Sometimes I'll look down at my watch 3 consecutive times and still not know what time it is.
2. Nothing sucks more than that moment during an argument when you realize you're wrong.
3. I totally take back all those times I didn't want to nap when I was younger.
4. There is great need for a sarcasm font.
5. How the hell are you supposed to fold a fitted sheet?
6. Was learning cursive really necessary?
7. Map Quest really needs to start their directions on # 5. I'm pretty sure I know how to get out of my neighborhood.
8. The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that their brain is also important.
9. I can't remember the last time I wasn't at least kind-of tired.
10. Bad decisions make good stories.
11. You never know when it will strike, but there comes a moment when you know that you just aren't going to do anything productive for the rest of the day.
12. Can we all just agree to ignore whatever comes after Blu-ray? I don't want to have to restart my collection...again.
13. I'm always slightly terrified when I exit out of Word and it asks me if I want to save any changes to my ten-page technical report that I swear I did not make any changes to.
14. I keep some people's phone numbers in my phone just so I know not to answer when they call.
15. I think the freezer deserves a light as well.
16. I disagree with Kay Jewelers. I would bet on any given Friday or Saturday night more kisses begin with Miller Light than Kay.
17. I have a hard time deciphering the fine line between boredom and hunger.
18. How many times is it appropriate to say "What?" before you just nod and smile because you still didn't hear or understand a word they said?
19. I love the sense of camaraderie when an entire line of cars team up to prevent some jerk from cutting in at the front. Stay strong, brothers and sisters!
20. Shirts get dirty. Underwear gets dirty. Pants? Pants never get dirty, and you can wear them forever.
21. Even under ideal conditions people have trouble locating their car keys in a pocket, finding their cell phone, and Pinning the Tail on the Donkey - but I'd bet everyone can find and push the snooze button from 3 feet away, in about 1.7 seconds, eyes closed, first time, every time. Uh Huh!
22. Life just gets better as you get older doesn't it? I was in a Starbucks recently when my stomach started rumbling and I realized that I desperately needed to fart. The place was packed but the music was really loud so to get relief and reduce embarrassment I timed my farts to the beat of the music. After a couple of songs I started to feel much better. I finished my coffee and noticed that everyone was staring at me. I suddenly remembered that I was listening to my IPod.
This is what happens when old people start using technology!
Saturday, December 20, 2014
Slightly Loony...
Slightly Loony... That's me – my handle for this blog and lots of other places. I originally used it as my eBay handle, but people liked it so much I started using it for all sorts of things. My brother Scott discovered this somehow, and created the sign at right for me. He used a beautiful piece of driftwood as the substrate, then hand-painted the reset of it. The sign is the perfect size to go over a door, so I'm going to put it over my office door, once I build the office.
Those crazy eyeballs are worth a closer look (click to embiggen). Those have the look of a logo to me :)
Those crazy eyeballs are worth a closer look (click to embiggen). Those have the look of a logo to me :)
Cat isolation...
Cat isolation... One of the challenges with putting all our cats (well, all but one) into a single-room cattery is that we no longer had any natural way to isolate cats that are being treated, have a behavior problem, etc. In our Jamul home, we had several rooms that could be pressed into service as a cat dormitory – great for the cats, not so convenient for the humans. In our new home we resolved to stop doing this, so that we can have nice things in most of the rooms and they will not be destroyed by a misbehaving cat. The single-room (it's a big room!) cattery was the answer. But then how can we isolate a cat if need be?
The simple answer is to use one of our large plastic cat carriers. Those are quite inconvenient, though, as this isn't the purpose they were designed for. Furthermore, those carriers have lots of nooks and crannies that trap ... stuff ... which is exactly what you don't want in an isolation setup. Veterinarians have this same problem, in spades (since basically every patient needs to be isolated). We looked at how they solved it. The answer was stainless steel living quarters, designed to be easy to clean, sturdy and durable, and configured in a manner convenient to both human and feline. We bought the setup in the photo (with Debbie happily showing it off!), a Shor-Line model that has two cages, one atop the other, mounted on wheels. It's an expensive system, but it was recommended to us by a veterinarian we trust, and it's the sort of thing you can depend on buying just once. It's designed for the kind of use a vet's office would give it; our use will be much lighter.
The unit arrived yesterday in a 7-foot high stack of 9 cardboard boxes on a pallet. Two of the boxes were large enough to be one of the cages; the others were all like giant pizza boxes. This morning we resolved to unpack and install this thing. There were more challenges than we expected :)
First challenge: how do we get this thing into the cattery? The most obvious route would require traversing three 30" doors, and the assemblies in the large boxes were just over 30" wide. I thought we were in trouble at that point, as the cages are mostly welded construction. After inspecting them more closely, though, I realized I could take a couple inches off one dimension by removing things like the door hinges and latches, and a brace. I removed all them, and we made it through the doors with about 1/4" to spare. Whew!
Once we had all the parts in the cattery, we faced our second challenge: no instructions of any kind. There were a bunch of mysterious looking parts, especially some flat stainless steel brackets shaped like an L or a T. After puzzling over it for 15 minutes or so, I figured out what all the parts were for. I failed miserably, though, at figuring out how to put it together. It turns out that at two separate junctures the order of assembly matters – and my first attempt was wrong on both of them. That meant I partially put it together, took it apart, partially put it together, took it apart, and finally put it together correctly.
The final challenge involved five stainless steel panels. Each of these had been bent from laser-cut stainless steel sheet. The plastic “shield” that protects the metal next to the cuts from laser and molten/gaseous steel problems was bonded to the steel with an adhesive that you could pull free. The trouble was that pulling all that plastic off was quite hard work. We spent more time removing those #$(@#)_#@$ sheets of plastic than we did on everything else put together!
Finally, though, we got the thing all assembled, rolled it over to its home in the cattery, and put its first resident in place. Kama is being isolated until he learns to behave nicely to the other cats.
Overall we're quite happy with the unit. It's very nicely made, sturdy as the proverbial tank, and the ergonomics for both human and feline are great. We sure would like to have had assembly instructions (especially to get the order of assembly correct!). And that damned plastic film really needs to be removed by the manufacturer. If I ever receive anything using that stuff again, I think I'll refuse shipment...
The simple answer is to use one of our large plastic cat carriers. Those are quite inconvenient, though, as this isn't the purpose they were designed for. Furthermore, those carriers have lots of nooks and crannies that trap ... stuff ... which is exactly what you don't want in an isolation setup. Veterinarians have this same problem, in spades (since basically every patient needs to be isolated). We looked at how they solved it. The answer was stainless steel living quarters, designed to be easy to clean, sturdy and durable, and configured in a manner convenient to both human and feline. We bought the setup in the photo (with Debbie happily showing it off!), a Shor-Line model that has two cages, one atop the other, mounted on wheels. It's an expensive system, but it was recommended to us by a veterinarian we trust, and it's the sort of thing you can depend on buying just once. It's designed for the kind of use a vet's office would give it; our use will be much lighter.
The unit arrived yesterday in a 7-foot high stack of 9 cardboard boxes on a pallet. Two of the boxes were large enough to be one of the cages; the others were all like giant pizza boxes. This morning we resolved to unpack and install this thing. There were more challenges than we expected :)
First challenge: how do we get this thing into the cattery? The most obvious route would require traversing three 30" doors, and the assemblies in the large boxes were just over 30" wide. I thought we were in trouble at that point, as the cages are mostly welded construction. After inspecting them more closely, though, I realized I could take a couple inches off one dimension by removing things like the door hinges and latches, and a brace. I removed all them, and we made it through the doors with about 1/4" to spare. Whew!
Once we had all the parts in the cattery, we faced our second challenge: no instructions of any kind. There were a bunch of mysterious looking parts, especially some flat stainless steel brackets shaped like an L or a T. After puzzling over it for 15 minutes or so, I figured out what all the parts were for. I failed miserably, though, at figuring out how to put it together. It turns out that at two separate junctures the order of assembly matters – and my first attempt was wrong on both of them. That meant I partially put it together, took it apart, partially put it together, took it apart, and finally put it together correctly.
The final challenge involved five stainless steel panels. Each of these had been bent from laser-cut stainless steel sheet. The plastic “shield” that protects the metal next to the cuts from laser and molten/gaseous steel problems was bonded to the steel with an adhesive that you could pull free. The trouble was that pulling all that plastic off was quite hard work. We spent more time removing those #$(@#)_#@$ sheets of plastic than we did on everything else put together!
Finally, though, we got the thing all assembled, rolled it over to its home in the cattery, and put its first resident in place. Kama is being isolated until he learns to behave nicely to the other cats.
Overall we're quite happy with the unit. It's very nicely made, sturdy as the proverbial tank, and the ergonomics for both human and feline are great. We sure would like to have had assembly instructions (especially to get the order of assembly correct!). And that damned plastic film really needs to be removed by the manufacturer. If I ever receive anything using that stuff again, I think I'll refuse shipment...
Restore your faith in humanity...
Lea...
Lea... She's our 17 year old field spaniel, and she's going downhill fast. Yesterday we were worried about her enough to have the local vet take a look at her. There was no indication that she was in pain, but the vet prescribed a steroid (prednizone) in the hopes that it will help with the arthritis and general stiffness. Lea's already outlived the predictions of the oncology vet, but we can easily tell that the tumors in her mouth and throat are growing. Chances are that they've spread to other organs and have started growing there, too. We don't expect to have her with us much longer; we're taking it day by day at this point. We're consoling ourselves with the thought that she's already done the unexpected: lived long enough to actually see our new home in Utah, and feel her paws in the grass there. Someday soon, we know we'll have a very sad decision to make, and we're steeling ourselves for it...
Progress report...
Progress report... We finally got the last of the stuff in the trucks unloaded into the house. Debbie has got the kitchen almost entirely unpacked, and is probably 90% done with the bedroom. I started off the day with the intent to get some unpacking done, but fate decided otherwise.
First, the (expected) inspector showed up around 9:30 am, made happy noises about the now leak-free gas line, and then proceeded to tell me a couple things that sounded like they'd derail the entire use-the-barn-in-the-winter notion. He said he couldn't sign off on our line until we had (a) submitted a diagram, and (b) installed a tracer wire along the gas pipe. Nobody had ever mentioned to us that we'd need a tracer wire. The pipe has been covered with 2' of dirt for nearly its entire length (275'), so putting that tracer wire in would take a lot of work – and there's no way we'd have it installed before the ground froze. Yikes! I managed to talk him into letting me submit an informal diagram, and (most importantly) to let me wait until spring to put that wire in. That was a close call!
So then we called the gas company to come hook up the barn, and the plumber was already here connecting things inside the barn. The gas company showed up at 1 pm and went to work. They had to change out the meter on our house, and raise the pressure into the meter from 0.5 psi to 2 psi. They did all that work, then got ready to leave – when I noticed that the output of the meter was just dangling in the air, not connected to the house. “Aren’t you forgetting something?”, said I. “Oh, no,” said they, “connecting the output is your problem. Better call a plumber!” This is late in the afternoon on the Friday before Christmas – good luck with that! I can't believe nobody ever mentioned this little requirement before!
Luckily for me, the plumber working on my barn agreed to install the required stuff on my meter. He had to run into town to buy parts, then come back out to do the work. He also had to call in another truck to help him out. After an hour or so of work, they got our house hooked back up to the gas line, so we had heat, hot water, stove, etc. Minor little things like that. Yikes!
On Monday the final plumbing inside the barn should be done, and at that point I can turn on the barn's heat. Woo hoo! However, there's still a bit of sheathing and insulating that needs to get done before that would be ... economically attractive.
Yesterday we also took delivery of a couple of stainless steel kennels that we'd ordered a few months ago. These are the sorts of kennels you'd see in a vet's office. We're going to use them for cats or dogs that need to be isolated. The kennels weigh 225 pounds apiece. I was expecting them to come as a kit, with all the sides broken down. Instead, they appear to be mostly assembled. On the concrete apron outside our garage there's a pallet with boxes piled 7' high. Unpacking that, and moving it all down to the cattery, is this morning's job...
First, the (expected) inspector showed up around 9:30 am, made happy noises about the now leak-free gas line, and then proceeded to tell me a couple things that sounded like they'd derail the entire use-the-barn-in-the-winter notion. He said he couldn't sign off on our line until we had (a) submitted a diagram, and (b) installed a tracer wire along the gas pipe. Nobody had ever mentioned to us that we'd need a tracer wire. The pipe has been covered with 2' of dirt for nearly its entire length (275'), so putting that tracer wire in would take a lot of work – and there's no way we'd have it installed before the ground froze. Yikes! I managed to talk him into letting me submit an informal diagram, and (most importantly) to let me wait until spring to put that wire in. That was a close call!
So then we called the gas company to come hook up the barn, and the plumber was already here connecting things inside the barn. The gas company showed up at 1 pm and went to work. They had to change out the meter on our house, and raise the pressure into the meter from 0.5 psi to 2 psi. They did all that work, then got ready to leave – when I noticed that the output of the meter was just dangling in the air, not connected to the house. “Aren’t you forgetting something?”, said I. “Oh, no,” said they, “connecting the output is your problem. Better call a plumber!” This is late in the afternoon on the Friday before Christmas – good luck with that! I can't believe nobody ever mentioned this little requirement before!
Luckily for me, the plumber working on my barn agreed to install the required stuff on my meter. He had to run into town to buy parts, then come back out to do the work. He also had to call in another truck to help him out. After an hour or so of work, they got our house hooked back up to the gas line, so we had heat, hot water, stove, etc. Minor little things like that. Yikes!
On Monday the final plumbing inside the barn should be done, and at that point I can turn on the barn's heat. Woo hoo! However, there's still a bit of sheathing and insulating that needs to get done before that would be ... economically attractive.
Yesterday we also took delivery of a couple of stainless steel kennels that we'd ordered a few months ago. These are the sorts of kennels you'd see in a vet's office. We're going to use them for cats or dogs that need to be isolated. The kennels weigh 225 pounds apiece. I was expecting them to come as a kit, with all the sides broken down. Instead, they appear to be mostly assembled. On the concrete apron outside our garage there's a pallet with boxes piled 7' high. Unpacking that, and moving it all down to the cattery, is this morning's job...
Friday, December 19, 2014
Cattery...
Cattery... Our basement cattery is now full of cats! It looks much better that way. There are five black cats in here, plus two multicolored ones. Six of them are wandering about, but one (Kama) is in jail (one of the carriers) because he's picking on the others. We may be putting him on Prozac (seriously – it works on cats, too). Some photos:
Teasel folk...
Teasel folk... A few weeks ago I shipped my mom some genuine Utah teasel seed pods. Around here they're considered a scourge, and my neighbors (who saw me harvesting the seed pods) were very puzzled. They tend to think of gasoline and herbicide for teasel; harvesting the seed pods was ... not sane. I didn't run into a soul who saw those seed pods as fodder for crafts.
My mom, however, had some crafty ideas. At right is the little teasel folk “family” she made for us, sitting on our mantle. She also made another similar family for us to give to a certain somebody.
So far it's the only thing that looks like Christmas in our house. All our Christmas decorations are buried somewhere in the piles of boxes strewn throughout our house...
My mom, however, had some crafty ideas. At right is the little teasel folk “family” she made for us, sitting on our mantle. She also made another similar family for us to give to a certain somebody.
So far it's the only thing that looks like Christmas in our house. All our Christmas decorations are buried somewhere in the piles of boxes strewn throughout our house...
Subscribe to:
Posts (Atom)


