Saturday, November 15, 2014

In my basement window casement...

In my basement window casement...

When the sun came up this morning...

When the sun came up this morning ... I could see that it looks like winter outside!  All this will be gone in a few hours, though – the forecast for today has temperatures well above freezing, and the sun shining.  The photos below are all from our front yard, where I dared walk in the snow for a little way :)

Actually it was quite comfortable – it's already over freezing, and I have a pair of Muck arctic sport boots, and those things keep my feet toasty even at 5°F.

Check out the icicles!  I haven't seen icicles since the last time I was in Estonia in the winter, probably 15 years ago...


Inclusion...

Inclusion...  Found in a rock that was cleaved in the process of building our fireplace.  The cleaved surface has hundreds of crystalline inclusions like this, with lots of different colors.  Wandering over the surface with a microscope is like looking at a jewelry store cabinet...

What could this be?

What could this be?  Why, it's a piece of Hershey's chocolate!  But what are all those little specks visible in the photo (60x, click to embiggen)?  I'm guessing the light brown specks are nut fragments, but what's the black?  The light is coming from the right, and the letters are indented into the chocolate...

Winter preparations...

Winter preparations...  The early snowfall motivated me to get ready for winter.  Warm boots and gloves were the first priority, followed quickly by arctic coveralls and thermal underwear.  I finally got delivery of the snow blade for my tractor.  It's a beauty, with a hydraulic “flipper” to switch it from left-sided to right-sided, and a very nice float-and-skid mechanism to follow the pavement without gouging it.  It should make my life much easier this winter...

Barn: progress report...

Barn: progress report...  The siding crew was here again yesterday.  They installed the tarpaper and mesh base for the rock that will be on the lower four feet of our barn's wall.  The roofers were here to repair some underlayment that had blown off, and to install flashing between the second floor walls and first floor roof.  On Monday the siding crew will install the second floor siding, and possibly start on the rock.

I spent a few hours on the tractor, filling the electrical trench in (covering the conduit).  On Monday I'll be getting a load of road base, and I'll be using it to put in the base for the barn's transformer.  If it dries out enough, I'll be trenching for water, gas, and network on Sunday...

Philae is asleep on 67P...

Philae is asleep on 67P...  If we're really lucky, it will wake up again when enough sunlight hits its solar panels.  One piece of good news: all the science data collected during its primary science phase was successfully downloaded.  Given the triple failure of the attachment mechanisms (reverse thrusters, harpoons, augers), it's a miracle that Philae did anything useful at all.  In fact, most of the science instruments performed as designed.  Even the comet sampling drill may have worked (we won't know until the downloaded data is analyzed), despite Philae's off-kilter landing...

The Department of Energy...

The Department of Energy ... claims to be making big money on it's “green tech”  loan program, despite losses from the bankruptcy of Solyndra, Fisker Auto, amongst other spectacular failures.  CoyoteBlog calls BS on this crazy claim.  They're actually losing money, as you would expect.  It's only the bizzaro-world accounting of the political class shows profit where there are actually losses.  Orwell was right about doublespeak; he just had the date 30 years too early...

Friday, November 14, 2014

The case of the smoking bulb...

The case of the smoking bulb...  That's an LED bulb, a “candelabra” bulb enclosed in a glass envelope.  When I installed this particular bulb and turned it on for the first time, the glass envelope instantly filled with black smoke.  Interestingly, the LEDs were still working, though not much light escaped through the smoke.  I let it set for a few days to see if smoke would dissipate, but it did not.  So I took the bulb outside, broke the glass envelope (which allowed the smoke to dissipate), then brought it back in to take a peek under the microscope (photo at right) – where I see the proverbial smoking gun.  The yellow brick-shaped thingy is a single LED, magnified 60x.  There are dozens of these LEDs arrayed cylindrically to make up the entire bulb.  They're soldered to a cylindrically-shaped printed circuit board of some type, presumably made of a material that can take fairly high temperatures (these bulbs get quite hot in normal operation).  Those tiny little balls you see scattered about the surface are made of solder – highly conductive metal.  Normally on a soldered surface you wouldn't see very many of these; I think something must have gone awry in the soldering machine for this bulb.  I'd bet the problem was caused by some of these solder balls causing a short circuit.  When I plugged the lamp into a socket without the glass envelope on (dangerous, as high voltages are exposed), all but two of the LEDs worked fine.  The two dead ones were adjacent to each other, and the surface between them slightly blackened – that's probably where the short circuit happened.

Into the trash you go, dead bulb!  The vendor has already shipped me a replacement – when I emailed them about the black smoke, they offered to replace it immediately...

There once was...

There once was ... a playground for “special needs” kids in Seattle.  It was a really nice place for these kids; the only one in the entire Seattle area.  It was safe, too – in ten years of operation, not a single kid had ever been injured.

So naturally the Seattle Parks Department ordered it destroyed, citing it as “extremely dangerous”.

We elect governments with the brains of a demented flea, and then we do things like entrust them with our healthcare.  That self-extermination gene theory of mine is starting to look better by the minute...

Quote of the day...

Quote of the day...  From P. J. O'Rourke:
“There is only one basic human right, the right to do as you damn well please.  And with it comes the only basic human duty, the duty to take the consequences.”
That may be the best condensation of libertarianism I've ever seen...

A clarifying example...

A clarifying example ... of how politicians think.  The FCC has been signaling for months that it's considering some level of Internet regulation (especially for ISPs).  Just this week Obama announced his support for regulating the Internet like a utility (a la cable TV).  Nobody knows what's actually going to happen; right now it's all just blather.  Now imagine that you're the CEO of an ISP planning to invest $18 billion into rolling out broadband nationwide.  The uncertainty about how ISPs will (or will not) be regulated means that you no longer know whether you can recover your $18 billion investment and make a profit, so naturally you halt the investment until the regulatory uncertain gets cleared up.

In a sane world, that CEO (Randall Stephenson of AT&T) would be lauded for his careful management of shareholder's money.  In the real world of Washington, D.C. he's being called everything from an extortionist to evil incarnate.  I listened to a few minutes of a C-SPAN house hearings broadcast this morning that was nothing but one insult after another being hurled at Stephenson. 

There are times when I think our species has some sort of genetic coding for self-extermination...

The science of ... snow rollers!

The science of ... snow rollers!  There are a lot more snow roller photos, along with an explanation of how they form...

Thursday, November 13, 2014

Barn: progress report...

Barn: progress report...  The siding crew has completely finished all the siding on the first floor, and have installed the soffits on the first floor roof.  They just left a little while ago, looking mighty cold.  Two of the builders were here today installing sheathing on the ceiling in the garage section, which they have now finished (photo).

The original plan was to sheath the interior walls and ceiling with 1/2" plywood.  Jim J., my builder, rather gently persuaded me to use what I called “chipboard” instead.  He did it by giving me an education on the differences between chipboard and oriented-strand board (OSB), which was an area that I knew absolutely nothing about.  It turns out there's a big difference between the two.  Chipboard is practically obsolete these days.  It was made by pressing wood chips, randomly oriented, together with glue and resin.  It wasn't very strong, and the glues used were inferior.  It's main claim to fame was that it was cheap.  OSB is made in a much different way, with longer, thinner purpose-cut chips that are carefully oriented in the manufacturing process to provide high strength in all directions, and a higher strength in one particular direction.  The glues, resins, and waxes used to bond it all together in a hot press are far superior to what they used for chipboard.  The result is actually stronger than plywood, mainly because OSB contains no interior voids (all but aircraft grade plywood does).  The particular OSB we're using for sheathing has one smooth side (you can see the reflection in the photo) that's smoother than the A side of plywood, ready for paint with no sanding required.  It's really kind of amazing how much better materials are available these days...

So what does a winter wuss do when there's white stuff outside?

So what does a winter wuss do when there's white stuff outside?  He assembles shelves, of course.  At right is one of our storerooms (in the basement), now fully equipped with nice steel wire shelving.  I'm quite happy with my choice of shelving (purchased through Amazon).  It's very sturdy, rated for 800 lbs. per shelving unit, and up to 300 lbs. on any one shelf.  The assembly is easy, though a bit tedious.  No tools are required; basically it all snaps or screws together with just one's hands.

I've got three more units to assemble today, for our second storeroom.  Two more units should arrive here soon, possibly today...

Barn: progress despite the white stuff!

Barn: progress despite the white stuff!  The siding contractors are here, beavering away in their winter garb, hanging siding on the barn.  The last time I looked (a couple hours ago), they had three sides of the first story done.

Jim J. and his partner Ray L. were here this morning, installing sheathing on the ceiling of the first story, where the garage door hardware and opener will be mounted.  The garage door guy is overdue; Jim's trying to track him down.

The Rocky Mountain Power folks sent an inspector out to see if we did ok on the conduit that was installed in the trench yesterday.  We passed, with flying colors.  Now I need to backfill all that trench (that will go much faster than digging it!), get road base in to set the transformer base into, then call them for another inspection.  Only if we pass that one will they put us in queue for the actual work of connecting the power.

Yesterday I decided to make a change in our plans for using the barn.  I've been thinking about this change for several weeks now – especially every time I walk up onto the second floor of the barn.  Our original plan for where to put my office/electronics workshop was in a big room in the house's basement – about 300 sq. ft., though slightly oddly shaped.  There are pros and cons to having an office down there, but the biggest con for me was no view.  The size was ok, though the slightly odd layout would mean things wouldn't be exactly as I'd like them.  The second floor of the barn is way bigger (2,000 sq. ft.) than any conceivable need we have for storage, though it's possible I'll live to regret those words :)  The east end of the barn's second floor has four windows: one looking south, two looking east, and one looking north.  All of them have really nice views.  I could easily partition off 500 or 600 sq. ft. of that space, finish it (walls and insulation), put a little wood stove in there, and have a very nice space for me to work in.  Yesterday I decided to go for it; I talked with my builder and he's perfectly ok with doing it, when the rest of the barn is finished.  He's going to put in a stovepipe right away, though, so that the roofer can properly handle that when he puts down the steel.

Now I can hardly wait for it to be done!

What's that white stuff, part 2...

What's that white stuff, part 2...  Well, it's coming down in large quantities now.  Big, fluffy snowflakes.  There's about a half inch on the driveway, and it looks like it's coming down at the rate of about an inch an hour.  It better not do that between now and Saturday!


Great moments in conduit laying...

Great moments in conduit laying...  I took these two photos late yesterday afternoon, while Jim J. and his son Talon were laying the conduit in the completed trench.  Talon has the perfect physique for working in the narrow (12") trench.  The two of them worked straight through until they finished it all, just before dark.  It's now ready for inspection.

There are many aspects of life up here that are markedly different than what we grew used to in California.  One of them is that it is completely normal (and common) here for kids to work with their parents – as I and my siblings did when we were growing up.  Jim has two sons that work with him often, and several other contractors I've used in the house did the same thing.  The flooring contractor had five family members involved in the business, and their office lady brought her daughter in frequently.  These kids are all learning what it's like to earn a living, instead of watching TV and playing games.  No wonder the Mormons are so successful, collectively!


What's that white stuff?

What's that white stuff?  It's snow, and it's coming down with a completely unreasonable enthusiasm.  Depending on which forecast I choose to believe, we're in for 3 to 5 inches of the stuff.  Looks like I won't be digging trenches today, either.

The radar picture at right shows that I'm in for a lot more snow, too.  The forecast says it is likely to be coming down from now through Saturday evening.  Yikes!

The day of the lights...

The day of the lights...  It was too darned cold out yesterday for me to work outside, so I spent much of the day installing new light fixtures.  The first one – a chandelier for a little room upstairs we're calling the “reading room” – turned out to be a much bigger challenge than I was expecting.  In the first photo below, you can see that the junction box is mounted off-center in the place constructed for it.  I can't imagine why someone would do that, but they did.  Naturally, the chandelier we bought needed every bit of that space; it wouldn't fit if mounted directly to the box.  So I had to fabricate an adapter plate (see second photo) to allow the mounting bolts to be off-center from the junction box – but in the exact center of the mount.  In the third photo you can see that my plate worked.  The next two photos show the chandelier installed – it looks great in that room (Debbie picked these lights, of course).

Then I installed two new lights for our entrance way (the last two photos).  The existing lights were coyote-ugly, and had tiny little 8 watt lamps that were so dim I used a flashlight there at night.  The news ones have 60 watt bulbs and are vastly more attractive...