Tuesday, October 21, 2014
“My dad’s in there!”
Loansharknado...
I was wrong.
I've never seen anything quite like loansharknado before. I can't decide whether the candidate deserves an award, or should be tarred, feathered, and run out of town...
Challenging problem?
Challenging problem? I ran across this post by Terence Tao, a math professor at UCLA, that poses a puzzle. It sounds very difficult (or even impossible), but it turns out to have an easy answer:
Now check out the comments on that post. Many of the people tackling this problem made it far more complicated than it actually is. You can almost see their knowledge of mathematical techniques getting in the way of their reasoning about the problem. You've heard the old expression “If you have a hammer, then everything looks like a nail.” I think there's a lot of that going on here :)
Three farmers were selling chickens at the local market. One farmer had 10 chickens to sell, another had 16 chickens to sell, and the last had 26 chickens to sell. In order not to compete with each other, they agreed to all sell their chickens at the same price. But by lunchtime, they decided that sales were not going so well, and they all decided to lower their prices to the same lower price point. By the end of the day, they had sold all their chickens. It turned out that they all collected the same amount of money, $35, from the day's chicken sales. What was the price of the chickens before lunchtime and after lunchtime?As is often the case with such problems, the description (probably deliberately) makes the problem sound a bit more complex than it actually is. You can simplify all that verbiage down to this equation:
a(52-x) + bx - 105 = 0The problem is to find a and b. Though the problem didn't actually say this, it turns out the answers are non-zero integers, which I just assumed was the case (for puzzles, this is the sort of answer one would expect). Once I had this equation, I reasoned that the average price per chicken was 105/52, or slightly over $2. So I tried 3 and 2 for a and b, and I had the answer (plug them into that equation, and you'll get x = 51). Total time: under 5 minutes.
Now check out the comments on that post. Many of the people tackling this problem made it far more complicated than it actually is. You can almost see their knowledge of mathematical techniques getting in the way of their reasoning about the problem. You've heard the old expression “If you have a hammer, then everything looks like a nail.” I think there's a lot of that going on here :)
Martin Gardner's puzzles...
Martin Gardner's puzzles... Eight of his very best. Back when Scientific American was a real science magazine, Gardner's column was something I greatly looked forward to in each issue...
Where do ideas come from?
Where do ideas come from? Isaac Asimov on creativity, from 1959. Several things from the essay resonate with me, but most especially the notion that solitude is a requirement. The innovations that I have come up with have always occurred to me while working alone. The most recent example I can think of is the approach I came up with for making Java's numeric formatting and parsing run more efficiently: it came to me after thoroughly understanding what Java does now, what other approaches people have made, and thinking hard about the problem while alone in my office over the course of several days. That pattern seems entirely typical. Asimov's references to the need for an informal, intimate atmosphere amongst a team also resonates.
It's interesting to note that the guy who wrote this essay is best known for his science fiction works, then for his non-fiction books about science, and then for his remarkable productivity (he still holds the record for the number of published books written by a single author)...
It's interesting to note that the guy who wrote this essay is best known for his science fiction works, then for his non-fiction books about science, and then for his remarkable productivity (he still holds the record for the number of published books written by a single author)...
Bureaucracy kills...
Especially in Afghanistan, but also in Iraq, Islamist forces have targeted the translators for retribution. If they can't get to the translator directly, they'll go after the translator's family. Dozens have been killed, many more kidnapped, injured, or maimed.
The translators often formed very close relationships with the troops they served, and those troops, once back in the U.S., have gone to great lengths to try to get their translator friends to safety in the U.S. You'd think this would be easy, as under pressure from these troops Congress passed years ago (and the President signed) several pieces of legislation designed to do exactly that – but thousands of these authorized visas go unused, while thousands of translators yearning to be in the U.S. remain in Iraq and Afghanistan, afraid for themselves and their families every day.
Why?
There is no good reason for it. Nothing other than U.S. State Department red tape is standing in the way. This has been true for six years now. Piles of forms, process that takes months, and other bureaucratic “features” are the only barriers. It's disgusting, infuriating, and shameful. These translators have already proven their friendship with Americans in the most meaningful way imaginable – by putting their lives on the line for their American friends.
In the YouTube clip I've posted here, John Oliver does a remarkably good job highlighting this problem. He conveys the issue in detail, so far as I can confirm, in a completely even-handed and accurate way. He's also funny in the process, a fact that I found challenging to deal with: humor while being angered is not something I experience every day. Bottom line, he's very effective at communicating this issue – far more effective than any news organization or politician I've ever seen. There are some lessons here that politicians could profit from...
Monday, October 20, 2014
Laugh or cry?
Laugh or cry? Crowd walks out on the light-bringer.
For six years now, Obama's administration has hopped from one disastrous piece of policy and execution to another. I could fill an entire post with just a list of them. The public's opinion has been slowly swinging against him for a while now, but suddenly it's swinging fast – and all, apparently, because of the latest screw-up with the Ebola response. I'd have to count that amongst the least frightening or worrisome of his screw-ups, so I'm really surprised at the general public reaction. The actual (as opposed to the hyped or theoretical) threat from Ebola to the U.S. is effectively zero when compared with, say, the certain consequences of ObamaCare. Or, for that matter, the likely consequences of the administrations serial mishandling of events in the Middle East. In other words, the general public seems to have a strange choice of what to get all twitterpated about...
For six years now, Obama's administration has hopped from one disastrous piece of policy and execution to another. I could fill an entire post with just a list of them. The public's opinion has been slowly swinging against him for a while now, but suddenly it's swinging fast – and all, apparently, because of the latest screw-up with the Ebola response. I'd have to count that amongst the least frightening or worrisome of his screw-ups, so I'm really surprised at the general public reaction. The actual (as opposed to the hyped or theoretical) threat from Ebola to the U.S. is effectively zero when compared with, say, the certain consequences of ObamaCare. Or, for that matter, the likely consequences of the administrations serial mishandling of events in the Middle East. In other words, the general public seems to have a strange choice of what to get all twitterpated about...
Sunday, October 19, 2014
The last bathroom fixture!
The last bathroom fixture! One of our shower's grab bars arrived after everything else did, and I didn't have a chance to install it until today. This is the very last bathroom fixture to go in, which you'd think would mean it's the last hole I have to drill in our nearly diamond-hard bathroom tile. Unfortunately (for me) there's still one more set, to install our bathroom window's window shade. It should arrive next week, and then I really am done with these *#&**%^$%&* holes!
Speaking of which, the photos below give you a flavor for what it's like to drill these holes. The first photo shows what it looks like just after you've successfully started a hole. Starting on slippery porcelain is a bit of an art combined with a healthy dose of brute force. The trick is to hold the drill at 45° to the surface, then cut a little crescent-moon shaped depression while holding the drill firmly in one place (not easy, that bit!). Once you've got your crescent, you push in firmly while rotating the drill slowly to the normal perpendicular orientation, over about 10 seconds. The result is what you see in that first photo, if you did it correctly. Once you've got that “island” in the center, you're golden: it holds the drill bit in the right spot. The second photo shows some drilling in progress. Note the liquid around the tip – that's water, which I squirt at the bit continuously to lubricate and cool it. This is vital to the longevity of the bit. Let it get hot, and you're going to plunk down $20 or more for another bit! The last photo shows three holes that are (thankfully) finished. To get from what you see in the second photo to a finished hole takes 10 to 15 minutes of constant drilling while pushing against the wall hard. If your drill bit is dull, it can take twice that long...
Speaking of which, the photos below give you a flavor for what it's like to drill these holes. The first photo shows what it looks like just after you've successfully started a hole. Starting on slippery porcelain is a bit of an art combined with a healthy dose of brute force. The trick is to hold the drill at 45° to the surface, then cut a little crescent-moon shaped depression while holding the drill firmly in one place (not easy, that bit!). Once you've got your crescent, you push in firmly while rotating the drill slowly to the normal perpendicular orientation, over about 10 seconds. The result is what you see in that first photo, if you did it correctly. Once you've got that “island” in the center, you're golden: it holds the drill bit in the right spot. The second photo shows some drilling in progress. Note the liquid around the tip – that's water, which I squirt at the bit continuously to lubricate and cool it. This is vital to the longevity of the bit. Let it get hot, and you're going to plunk down $20 or more for another bit! The last photo shows three holes that are (thankfully) finished. To get from what you see in the second photo to a finished hole takes 10 to 15 minutes of constant drilling while pushing against the wall hard. If your drill bit is dull, it can take twice that long...
Sign of the end times' approach?
Sign of the end times' approach? APOD is down :(
Update: APOD is back up! I was afraid it was the victim of Obama budget raids, but thankfully my fear was unfounded...
Update: APOD is back up! I was afraid it was the victim of Obama budget raids, but thankfully my fear was unfounded...
Little flower...
Little flower... This tiny flower is in bloom behind our house right now. Each blossom is about the size of a peppercorn – you can barely see that it's a flower. At 40x, it actually looks like a flower :)
Saturday, October 18, 2014
Screw...
Screw... This is a high quality wood screw, nickel-plated high tensile strength steel, at about 20x. These are what Nest supplies with its “Protect” fire/smoke/carbon monoxide alarms. Note the asymmetrical raised threads: one of them is higher and sharper than the other. Those were new to me, but I discovered they're called “high-low” threads, and provide several desirable characteristics for this sort of use. In particular, they're easier to screw in (I can attest to that) and harder to pull out – nice combination!
Andrew Jackson...
Andrew Jackson... Detail from the face of a $20 bill, at 10x. The level of fine detail in the printing on U.S. paper currency is really quite remarkable...
Subscribe to:
Posts (Atom)





