Saturday, September 13, 2014
It's amazing that the Internet ever works!
It's amazing that the Internet ever works! Practically every network engineer who has worked with BGP (the routing protocol used by the Internet “backbone” has the same reaction I did when it first dawned on me just how vulnerable it was. BGP is utterly dependent on being correctly configured – by humans! – by every participating router. This is a recipe for problems, and so it has proved. I've been involved in BGP administration at three different jobs, and each time some of our worst outages were traced back to BGP configuration errors – usually by our ISP, sometimes by us.
This is a situation that is ripe for improvement. Several teams are working on such improvements, and quite a few have tried in the past. Switching to some other routing method will be tough, though – BGP is as embedded in the Internet as driving on the right is on American roads. But that vulnerability to human error is less acceptable every day...
This is a situation that is ripe for improvement. Several teams are working on such improvements, and quite a few have tried in the past. Switching to some other routing method will be tough, though – BGP is as embedded in the Internet as driving on the right is on American roads. But that vulnerability to human error is less acceptable every day...
Puppies swimming underwater...
Puppies swimming underwater... This is industrial-strength cuteness. More puppies here.
Oh, I wants one. Or five!
Oh, I wants one. Or five!
Bathroom fixtures...
Bathroom fixtures... Most of this past week I've been working on installing various fixtures in our new bathroom – things like towel rods, shelves, soap dishes, etc. The bathroom is completely tiled, so this means drilling holes in the tiles for the mounting screws. Lots of holes.
I've drilled holes in tiles before, using special carbide drill bits. I bought some of those bits for this job – they worked before, so why wouldn't they work now? But they didn't. In fact, they were a rather complete failure. Fifteen minutes of attempting got me a just barely noticeable nick on one tile. This led to some research on the web, a phone call to the guy who did the tile work, a bit of education, and finally to a solution.
It turns out that the tile Debbie picked was a particularly high quality Italian-made porcelain tile. The tile guy told me that these tiles are fired for so long, at such a high temperature, that they're fused nearly all the way through. He wore out several saw blades doing our bathroom! Ceramic tiles that we've had in our past bathrooms have only a thin layer of fused material, and even that layer wasn't as hard was these porcelain tiles. Bottom line: our tiles are too hard for a carbide bit to work. To drill a hole in these tiles, you have to use a freaking diamond drill bit.
For the most part, I'm drilling 1/4" holes, with a few 5/16" holes as well. The diamond drill bits, even at such small diameters, are actually tiny little hole saws. When you look at the working end of the bit, you see a circle with a hole in the middle, just like you would on a larger hole saw. The diamond chips are embedded in that circle. Getting that bit started on a new hole is tricky, but not bad once you get the hang of it. The essential “trick” is to start the hole by holding the drill at 45° to the surface, making a little nick where one edge of the hole should be. Once you get that little nick, then you (slowly!) rotate the drill until it's perpendicular to the surface. After about five or six holes, that part started to get easy.
But this is not like drilling a hole in wood, or even metal. Each of these holes is taking me from 10 to 15 minutes of drilling, with steady hard pressure on the drill with one hand, while I squirt cooling and lubricating water onto the bit with the other hand, often while in an awkward stance. This is darned hard work compared with any other drilling I've ever done!
Most of our bathroom fixtures are in now. I've drilled 38 holes at this point, and I have just 24 to go. I will be one very happy camper when that last hole is done :)
I've drilled holes in tiles before, using special carbide drill bits. I bought some of those bits for this job – they worked before, so why wouldn't they work now? But they didn't. In fact, they were a rather complete failure. Fifteen minutes of attempting got me a just barely noticeable nick on one tile. This led to some research on the web, a phone call to the guy who did the tile work, a bit of education, and finally to a solution.
It turns out that the tile Debbie picked was a particularly high quality Italian-made porcelain tile. The tile guy told me that these tiles are fired for so long, at such a high temperature, that they're fused nearly all the way through. He wore out several saw blades doing our bathroom! Ceramic tiles that we've had in our past bathrooms have only a thin layer of fused material, and even that layer wasn't as hard was these porcelain tiles. Bottom line: our tiles are too hard for a carbide bit to work. To drill a hole in these tiles, you have to use a freaking diamond drill bit.
For the most part, I'm drilling 1/4" holes, with a few 5/16" holes as well. The diamond drill bits, even at such small diameters, are actually tiny little hole saws. When you look at the working end of the bit, you see a circle with a hole in the middle, just like you would on a larger hole saw. The diamond chips are embedded in that circle. Getting that bit started on a new hole is tricky, but not bad once you get the hang of it. The essential “trick” is to start the hole by holding the drill at 45° to the surface, making a little nick where one edge of the hole should be. Once you get that little nick, then you (slowly!) rotate the drill until it's perpendicular to the surface. After about five or six holes, that part started to get easy.
But this is not like drilling a hole in wood, or even metal. Each of these holes is taking me from 10 to 15 minutes of drilling, with steady hard pressure on the drill with one hand, while I squirt cooling and lubricating water onto the bit with the other hand, often while in an awkward stance. This is darned hard work compared with any other drilling I've ever done!
Most of our bathroom fixtures are in now. I've drilled 38 holes at this point, and I have just 24 to go. I will be one very happy camper when that last hole is done :)
The first fall color...
The first fall color... Not down in the valley yet – but on the mountains around us it's starting to spread across the slopes. The photo at right (click to embiggen) is of the unnamed mountain to our east, in the Wasatch range. The patches of red there are at about 6,000' altitude; the scrub oaks are turning. In other places we see patches of yellow, from the quaking aspen turning. The locals tell me that Sardine Canyon (which State Route 91 takes through the Wellsville mountains) is spectacular just about every year. Gotta go see that!
Tractor arrived!
Tractor arrived! Late yesterday afternoon, Lawrence W. of the local Kubota dealership drove up with my new tractor and some of it's attachments. I've got a couple more attachments on the way (a snow blade and a cart), but he delivered the tractor (a Kubota B26 with loader and backhoe), a Wallenstein chipper/shredder, and a set of pallet forks.
The B26 is an updated and more powerful version of my old B24, so much about this tractor is very familiar to me. Kubota has made a lot of improvements in the 15 years since I bought my B24, though. The controls are much improved, and much easier to use. The key controls are all easily reached with the seat swiveled around backwards for backhoe work; I especially appreciate that. The hydraulics are now very easy to make slow motions with – that took special skill with my old B24; now it's easy as pie.
I put the new tractor and chipper/shredder to work today. I started chipping up the huge pile of brush that I've been accumulating since last April. I made it through about a third of the pile today (with only a half day's work). I think I'll be able to knock out the rest tomorrow. The Wallenstein chipper shredder is a very nice piece of machinery. I bought it after reading dozens of reviews online, and I bought it from a place in Pennsylvania – no local dealers had it. I have to say that it was quite a relief to see that the machine was every bit as good as those reviews said it was :)
The B26 is an updated and more powerful version of my old B24, so much about this tractor is very familiar to me. Kubota has made a lot of improvements in the 15 years since I bought my B24, though. The controls are much improved, and much easier to use. The key controls are all easily reached with the seat swiveled around backwards for backhoe work; I especially appreciate that. The hydraulics are now very easy to make slow motions with – that took special skill with my old B24; now it's easy as pie.
I put the new tractor and chipper/shredder to work today. I started chipping up the huge pile of brush that I've been accumulating since last April. I made it through about a third of the pile today (with only a half day's work). I think I'll be able to knock out the rest tomorrow. The Wallenstein chipper shredder is a very nice piece of machinery. I bought it after reading dozens of reviews online, and I bought it from a place in Pennsylvania – no local dealers had it. I have to say that it was quite a relief to see that the machine was every bit as good as those reviews said it was :)
Barn: we really has walls!
Barn: we really has walls! All four of them, now – last night the builders finished the framing for all four first story walls. On Monday, they'll start “skinning” the outside, then put up insulation, then skin the inside. It's starting to look like a real building, now!
Friday, September 12, 2014
Barn: we has walls!
Barn: we has walls! Well, one wall, anyway :)
The builder started framing last night, bolting the bottom plates (the pieces of wood running horizontally on top of the foundations) in place. The bottom plates are pressure-treated (copper oxide) 2x6s. Under them, visible in several of the photos, is a layer of blue closed-cell foam. This acts as a waterproof seal between the bottom plate and the concrete. I've seen this done with rubbery caulking before, but never with the foam. The foam is much easier, and I'll bet it's more reliable, too.
The general approach to framing this building is different than I've seen before. I'm used to seeing a wall's frame built entirely on the floor, then tilted up into place. These walls are being built in place, nailing the studs to the bottom plate and then the top plate to the studs. With the right gear (scaffold, ladders, nail guns) this doesn't seem to be particularly difficult to do.
The builder started framing last night, bolting the bottom plates (the pieces of wood running horizontally on top of the foundations) in place. The bottom plates are pressure-treated (copper oxide) 2x6s. Under them, visible in several of the photos, is a layer of blue closed-cell foam. This acts as a waterproof seal between the bottom plate and the concrete. I've seen this done with rubbery caulking before, but never with the foam. The foam is much easier, and I'll bet it's more reliable, too.
The general approach to framing this building is different than I've seen before. I'm used to seeing a wall's frame built entirely on the floor, then tilted up into place. These walls are being built in place, nailing the studs to the bottom plate and then the top plate to the studs. With the right gear (scaffold, ladders, nail guns) this doesn't seem to be particularly difficult to do.
| Bottom plate, north side |
| One of the hold-down bolts |
| A gorgeous morning... |
| See the foam? |
| Men at work |
| Making a window frame |
| Putting up a top plate |
| The west wall is almost done |
| Crisp and clear |
Bird's nest...
Bird's nest... Yesterday evening I found this nest sitting on the lawn underneath one of our pine trees in the front yard. It's a beautiful example of mud-and-grass construction, with a shell that's quite thin, yet strong. The grass provides tensile strength, the hardened mud compressive strength – the same principle as rebar in concrete. There are two “holes” in the bottom of the nest that are where it sat on branches, incorporating them into its structure. Completely absent are any materials to make the inside softer, as one would usually find. I see no signs that this beautifully made nest was actually ever used. It likely represents a male's failed attempt to woo a female...
The Middle East is a most complicated muddle...
The Middle East is a most complicated muddle... Which countries get along well with which others? Which countries are enemies of each other? Which ones have fraught relationships?
This stuff is all very hard to sort out and keep straight, even for someone immersed in the history and politics of the area. This interactive chart does the best job I've ever seen of distilling this information down to a digestible size. It's worth spending some time studying. In the screenshot below, I've hovered over Iran; it's significant relationships are highlighted...
This stuff is all very hard to sort out and keep straight, even for someone immersed in the history and politics of the area. This interactive chart does the best job I've ever seen of distilling this information down to a digestible size. It's worth spending some time studying. In the screenshot below, I've hovered over Iran; it's significant relationships are highlighted...
Look at what happens...
Look at what happens ... when a top-down bureaucracy controls medicine. It was completely predictable, and was predicted by a large number of people, including me.
This is what always happens when government bureaucracy replaces free markets. It's so obvious and so predictable that you have to wonder how on earth the Progressives can deny it. And yet they do, even when it slaps them personally upside the head...
This is what always happens when government bureaucracy replaces free markets. It's so obvious and so predictable that you have to wonder how on earth the Progressives can deny it. And yet they do, even when it slaps them personally upside the head...
Twenty four year old woman has no cerebellum...
Twenty four year old woman has no cerebellum... And yet she functions within the bounds of “normal”. The adaptability of the human body is endlessly amazing...
“We are screwed.”
“We are screwed.” So says Neo-Neocon, upon reading a poll of likely voters and discovering that less than two thirds of them knew which political party controlled the House or the Senate.
I'm afraid it's even worse than she thinks. On House control, for example, the breakdown was 63% correctly said that Republicans were in control, 20% incorrectly said that Democrats were in control, and 17% admitted not knowing. The group answering “Democrat” most likely simply guessed wrong. There are only two answers, so one would expect that half of those who guessed would guess wrong – and half would have guessed right. That means that probably only 43% actually knew that Republicans control the House – the rest of the “Republican” answers were those who simply guessed correctly.
This brings to mind another poll, taken around the time of the Monica Lewinsky scandal. I can't locate it now, but I remember the gist of the result. The poll had a single question for likely voters: list the names of the two major U.S. political parties. Only 33% – exactly one third – of respondents correctly listed “Republicans” or “Democrats”. I remember looking into the poll's details, and they seemed to do it well – they accepted all plausible variations for either party, including things like “GOP”. Even with that degree of leniency, still only a third of likely voters knew the names. Ugh...
I'm afraid it's even worse than she thinks. On House control, for example, the breakdown was 63% correctly said that Republicans were in control, 20% incorrectly said that Democrats were in control, and 17% admitted not knowing. The group answering “Democrat” most likely simply guessed wrong. There are only two answers, so one would expect that half of those who guessed would guess wrong – and half would have guessed right. That means that probably only 43% actually knew that Republicans control the House – the rest of the “Republican” answers were those who simply guessed correctly.
This brings to mind another poll, taken around the time of the Monica Lewinsky scandal. I can't locate it now, but I remember the gist of the result. The poll had a single question for likely voters: list the names of the two major U.S. political parties. Only 33% – exactly one third – of respondents correctly listed “Republicans” or “Democrats”. I remember looking into the poll's details, and they seemed to do it well – they accepted all plausible variations for either party, including things like “GOP”. Even with that degree of leniency, still only a third of likely voters knew the names. Ugh...
“We just try.”
“We just try.” The sad story of a mom who lets her six year old play outside – and has a “concerned” neighbor call the police and Child Protective Services. There's nothing she can do about it.
It's not at all like that here in Paradise, Utah. Kids are still “free range” around here. My neighbor's kids romp in “the forest” (an acre of pines) on our property. Most young boys own guns (and use them), and not just .22s. All through the valley, the attitude of parents is much like it was where and when I grew up. Kids can play outside, they wander far from home sometimes, and nobody calls either the police or Child Protective Services. We frequently see kids riding bicycles without helmets, and kids riding in the backs of pickups.
But where I recently moved from (the San Diego area), this wasn't true at all. I can't even imagine the response to some kids riding in the back of a pickup – it would surely be on the news, and those kids would almost certainly be taken away from their parents and put into the foster system. The parents would be in jail.
Is America better off for this kind of extreme protectionism? Are the kids better off for it? I think not, on both counts. Not that my opinion counts for very much. But at least I'm living in a place now where most people seem to agree with me on this sort of issue. I hope that lasts as long as I do...
It's not at all like that here in Paradise, Utah. Kids are still “free range” around here. My neighbor's kids romp in “the forest” (an acre of pines) on our property. Most young boys own guns (and use them), and not just .22s. All through the valley, the attitude of parents is much like it was where and when I grew up. Kids can play outside, they wander far from home sometimes, and nobody calls either the police or Child Protective Services. We frequently see kids riding bicycles without helmets, and kids riding in the backs of pickups.
But where I recently moved from (the San Diego area), this wasn't true at all. I can't even imagine the response to some kids riding in the back of a pickup – it would surely be on the news, and those kids would almost certainly be taken away from their parents and put into the foster system. The parents would be in jail.
Is America better off for this kind of extreme protectionism? Are the kids better off for it? I think not, on both counts. Not that my opinion counts for very much. But at least I'm living in a place now where most people seem to agree with me on this sort of issue. I hope that lasts as long as I do...
Creatures of the night...
Creatures of the night... That's a serval (or cervil) at right. More here. The book of photos is available here...
Thursday, September 11, 2014
Aviation humor...
Aviation humor... A nice collection from reader Simi L.:
British Airways flight asks for push back clearance from terminal.
Control Tower replies: 'And where is the world's most experienced airline going today without filing a flight plan?'
-----------------------
ATC: "Al Italia 345 continue taxi to 26L South via Tango - check for workers along taxiway."
Al Italia 345: "Roger, Taxi 26 Left via Tango. Workers checked - all are working"
-----------------------
Nova 851: "Halifax Terminal, Nova 851 with you out of 13,000 for 10,000, requesting runway 15."
Halifax Terminal (female): "Nova 851, Halifax, the last time I gave a pilot what he wanted I was on penicillin for three weeks. Expect runway 06."
-----------------------
Lost student pilot: "Unknown airport with Cessna 150 circling overhead, please identify yourself."
-----------------------
Tower: Have you got enough fuel or not?
Pilot: Yes.
Tower: Yes what?
Pilot: Yes, SIR!
---------------------------
Frankfurt Control: 'AF1733, You are on an eight mile final for 27R. Youhave a UH-1 three miles ahead of you on final; reduce speed to 130 knots.'
Pilot: 'Roger, Frankfurt. We're bringing this big bird back to 130 fer ya.'
Control: (a few moments later): 'AF33, helicopter traffic at 90 knots now 11/2 miles ahead of you; reduce speed further to 110 knots.'
Pilot: 'AF 33 reining this here bird back further to 110 knots.'
Control: 'AF33, you are three miles to touchdown, helicopter traffic nowone mile ahead of you; reduce speed to 90 knots'
Pilot (a little miffed): 'Sir, do you know what the stall speed of this here C-130 is?'
Control: 'No, but if you ask your co-pilot, he can probably tell you.'
--------------------------
ATC: 'Cessna 123, what are your intentions?
Cessna: 'To get my Commercial Pilot's License and Instrument Rating.'
ATC: 'I meant in the next five minutes, not years.'
--------------------------
Controller: AF123, say call sign of your wingman.
Pilot: Uh... approach, we're a single ship.
Controller: Oh, Oh, Shit! You have traffic!
---------------------
O'Hare Approach: USA212, cleared ILS runway 32L approach, maintain 250 knots.
USA212: Roger approach, how long do you need me to maintain that speed?
O'Hare Approach: All the way to the gate if you can.
USA212: Ah, OK, but you better warn ground control.
----------------------
ATC: Pan Am 1, descend to 3,000 ft on QNH, altimeter 1019.
Pan AM 1: Could you give that to me in inches?
ATC: Pan Am 1, descend to 36,000 inches on QNH, altimeter 1019
------------------------
Cessna 152: 'Flight Level Three Thousand, Seven Hundred'
Controller: 'Roger, contact Houston Space Center.'
--------------------------
Beech Baron: Uh, ATC, verify you want me to taxi in front of the 747.
ATC: Yeah, it's OK. He's not hungry.
-------------------------
Student Pilot: 'I'm lost; I'm over a big lake and heading toward the big "E".
Controller: 'Make several 90 degree turns so I can identify you on radar.' (short pause)...
Controller: 'Okay then. That big lake is the Atlantic Ocean. Suggest you turn to the big "W" immediately...'
--------------------
Pilot: 'Approach, Acme Flt 202, with you at 12,000' and 40 DME.'
Approach: 'Acme 202, cross 30 DME at and maintain 8000'.'
Pilot: 'Approach, 202's unable that descent rate.'
Approach: 'What's the matter 202? Don't you have speed brakes?'
Pilot: 'Yup. But they're for my mistakes. Not yours.'
-----------------------------
Tower: 'American...and for your information, you were slightly to the left of the centerline on that approach.'
American: 'That's correct; and, my First Officer was slightly to the right'
-----------------------
Controller: 'USA353 contact Cleveland Center 135.60. (pause)
Controller: 'USA353 contact Cleveland Center 135.60!' (pause)
Controller: 'USA353 you're just like my wife you never listen!'
Pilot: 'Center, this is USA553, maybe if you called her by the right name you'd get a better response!'
-----------------------
BB: 'Barnburner 123, Request 8300 feet.'
Bay Approach: 'Barnburner 123, say reason for requested altitude.'
BB: 'Because the last two times I've been at 8500, I've nearly been run over by some bozo at 8500 feet going the wrong way!'
Bay Approach: 'That's a good reason. 8300 approved.'
------------------------------------
Controller: 'FAR1234 confirm your type of aircraft. Are you an Airbus 330 or 340?'
Pilot: 'A340 of course!'
Controller: 'Then would you mind switching on the two other engines and give me 1000 feet per minute, please?'
---------------------------
Tower: 'Cessna 123, turn right now and report your heading.'
Pilot: 'Wilco. 341, 342, 343, 344, 345...'
---------------------------------
Foreign Pilot Trainee: 'Tower, please speak slowly, I am a baby in English and lonely in the cockpit.'
-----------------------
Controller: 'CRX600, are you on course to SUL?'
Pilot: 'More or less.'
Controller: 'So proceed a little bit more to SUL.'
----------------------------
Pilot: 'Good morning, Frankfurt ground, KLM 242 request start up and push back, please.'
Tower: 'KLM 242 expect start up in two hours.'
Pilot: 'Please confirm: two hours delay?'
Tower: 'Affirmative.'
Pilot: 'In that case, cancel the good morning!'
The mathematics of medieval bell ringing...
The mathematics of medieval bell ringing... Otherwise known as campanology. Anytime someone contends that the British are a sane lot, the only refutation required is change ringing. That will end the debate immediately...
Racial preferences in romance...
Racial preferences in romance... More fascinating data from OKCupid. I'm unsurprised to find that people show a preference for members of their own race, but some of the other findings do surprise me.
For instance, white men are attracted to Asian women slightly more than to white women – and Asian women are almost as attracted to white men as to Asian men. Why on earth would that be true? Then there's this: black men are slightly more attracted to Asian women than to black women – but Asian women are much less attracted to black men than to Asian men.
Then there's this more general observation: men of any race are less attracted to only one other race, but women of any race are less attracted to either two or three other races. Women are also more polarized in their attractions than men: 17%/13% vs. 5%/15% (more attracted/less attracted averages)...
For instance, white men are attracted to Asian women slightly more than to white women – and Asian women are almost as attracted to white men as to Asian men. Why on earth would that be true? Then there's this: black men are slightly more attracted to Asian women than to black women – but Asian women are much less attracted to black men than to Asian men.
Then there's this more general observation: men of any race are less attracted to only one other race, but women of any race are less attracted to either two or three other races. Women are also more polarized in their attractions than men: 17%/13% vs. 5%/15% (more attracted/less attracted averages)...
“And here we are...”
“And here we are...” Daniel Henninger on the humbling of Barack Hussein Obama...
Subscribe to:
Posts (Atom)


