Monday, August 25, 2014
Another loony in a wing suit...
A magnificent solar flare...
A magnificent solar flare... An “M-flare”, just a medium-sized one. But this one was captured in a movie by the SOHO satellite...
Sunday, August 24, 2014
Grout...
Grout... The fellow who did the tile work in our remodeled master bathroom did a really nice job, but there was one imperfection that we didn't like: the grout, in certain places, hadn't been properly removed. When grout is correctly used, all of it should be below the level of the surrounding tile or rock. In the case of our bathroom, some of the right-angle joints (and especially the triple corners) had a “bead” of grout that was too high. It's easy to see how this happened: when you apply grout, the last step is to clean off the excess with a sponge. That works great on flat surfaces – but not so much on right angled joints. You can see this on the photo above right (click to embiggen).
After a bit of research on the web, I headed down to my local Home Depot to get a grout brush. I expected to be using this and my pocket knife to (laboriously) work that excess grout off. However, when I arrived at Home Depot and started looking at the tile tools, a friendly fellow came over and asked me what I was trying to accomplish. He told me about a special tool made for exactly my problem: a carbide-tipped scraper with a small triangular blade (see photos at right). I headed home considerably better armed for the battle than I had expected.
With just a little practice I got the hang of that scraper. It's important to wet down the grout and tile before you start – that keeps the dust from flying, and (more importantly) it helps prevent the scraper from “biting” into the rock, by lubricating it (same principle as shaving foam). It's also important to be gentle and to use light pressure. It's far better to make ten very light strokes than to try to remove it all with one muscular stroke, because that greatly reduces the chances of a catastrophic mistake (removing too much grout, or a chunk of rock).
The results are better than I had hoped for, and with far less work. To go over the entire shower took me about 4 hours of work. With just my pocket knife, that would have been more like 4 days. Furthermore, this was easy work, with relatively little skill required (a vital element, when it's me doing the work!).
Bottom line: if you have an excess grout situation, get this tool!
After a bit of research on the web, I headed down to my local Home Depot to get a grout brush. I expected to be using this and my pocket knife to (laboriously) work that excess grout off. However, when I arrived at Home Depot and started looking at the tile tools, a friendly fellow came over and asked me what I was trying to accomplish. He told me about a special tool made for exactly my problem: a carbide-tipped scraper with a small triangular blade (see photos at right). I headed home considerably better armed for the battle than I had expected.
With just a little practice I got the hang of that scraper. It's important to wet down the grout and tile before you start – that keeps the dust from flying, and (more importantly) it helps prevent the scraper from “biting” into the rock, by lubricating it (same principle as shaving foam). It's also important to be gentle and to use light pressure. It's far better to make ten very light strokes than to try to remove it all with one muscular stroke, because that greatly reduces the chances of a catastrophic mistake (removing too much grout, or a chunk of rock).
The results are better than I had hoped for, and with far less work. To go over the entire shower took me about 4 hours of work. With just my pocket knife, that would have been more like 4 days. Furthermore, this was easy work, with relatively little skill required (a vital element, when it's me doing the work!).
Bottom line: if you have an excess grout situation, get this tool!
Buh-bye, hard disks!
Buh-bye, hard disks! A terabyte on a postage stamp, faster and more durable than flash memory, coming soon.
The first non-volatile RAM I ever worked with (back in '72) was made with magnetic “cores” – tiny toroids with wire strung through them. These had a density of about 78 bits per cubic inch. The first versions of these new memories will have densities of roughly 2 x 1015 bits per cubic inch – a density increase of about 3 x 1013 in just 55 years. It seems unlikely that non-volatile RAM advances will keep up at that rate! On the other hand, as recently as 20 years ago I would never have guessed that I'd live to see the density of flash memory today...
The first non-volatile RAM I ever worked with (back in '72) was made with magnetic “cores” – tiny toroids with wire strung through them. These had a density of about 78 bits per cubic inch. The first versions of these new memories will have densities of roughly 2 x 1015 bits per cubic inch – a density increase of about 3 x 1013 in just 55 years. It seems unlikely that non-volatile RAM advances will keep up at that rate! On the other hand, as recently as 20 years ago I would never have guessed that I'd live to see the density of flash memory today...
Saturday, August 23, 2014
We can fix anything...
Friday, August 22, 2014
Dangerous U.K. law...
Dangerous U.K. law... We need to do our best to make certain this doesn't happen here. The law in question requires U.K. citizens to decrypt files upon demand from the police – or face 2 to 5 years in jail. This article has a good discussion of the law's problems.
The first objection you might think of is this: what happens if you forget the key (or password)? Answer: you go to jail. Yikes! That's pretty bad!
But it gets much, much worse, as the article explains. The police just have to think you have an encrypted file. If you're not familiar with encryption, you might not realize just how problematic that is. You see, an encrypted file (which can have any name at all) just looks like random data. There's no test you can apply to it that will unambiguously show that it's an encrypted file. So any file containing random data could be an encrypted file – and in the U.K., the police can demand that you decrypt it. If the file happens to be just random data, and not an encrypted file, of course there's no way that you could possibly decrypt it! If you can't convince the police that it's innocent random data, you could find yourself sharing a cell with a murderer for several years...
The first objection you might think of is this: what happens if you forget the key (or password)? Answer: you go to jail. Yikes! That's pretty bad!
But it gets much, much worse, as the article explains. The police just have to think you have an encrypted file. If you're not familiar with encryption, you might not realize just how problematic that is. You see, an encrypted file (which can have any name at all) just looks like random data. There's no test you can apply to it that will unambiguously show that it's an encrypted file. So any file containing random data could be an encrypted file – and in the U.K., the police can demand that you decrypt it. If the file happens to be just random data, and not an encrypted file, of course there's no way that you could possibly decrypt it! If you can't convince the police that it's innocent random data, you could find yourself sharing a cell with a murderer for several years...
Thursday, August 21, 2014
Barn: the backfilling marches on...
Barn: the backfilling marches on... Another 30 or 40 yards of pit run got dumped today. The builder is hoping that all the needed pit run will be there by tomorrow. Today they started leveling and compacting the pit run, 3 or 4 inches below the top of the foam board – the right height to provide a base for the next layer of pea gravel.
In other news, the painters finished up with everything they could do at this point. They have a couple hours of work left after the flooring folks have finished with the stairways, but everything else is done. I thought I'd memorialize the appearance of the garage, which will surely never look this good again. Ever.
| Rough leveling |
| Fine leveling, and compactor |
Worthless scanners – the TSA's security theater...
Worthless scanners – the TSA's security theater... Marine, reader, former colleague, and friend Larry E. links to this article and comments:
In my recent travels I've gone through these things and been wanded or searched after. Once, I looked back and saw the image, a silhouette style with a yellow mark where it found something. This is what the TSA goon was looking at when he wanded me. The indicator was on my mid-thigh. i.e. no pockets or anything. So I asked him if the thing just randomly places the marks. I don't think he found me amusing.Indeed...
I don't believe they are any more effective than the failed "puffer" machines.
Frankly I'm offended and dismayed that we are deliberately dehumanized and treated as cattle as we shuffle belt and shoe-less through security lines with self-important goons shouting orders about whether the laptop goes in a separate bin or not.
I've also notice a lot more "homeland security - police" vehicles and personnel around. Their blue stripped "police" cars going up the freeway. commando outfitted homeland security "police" wandering the street fair. Homeland security "police" with automatic weapons boarding trains to walk around before they leave the station.
Why don't I feel safer?
The strange & curious tale of the last true hermit...
The strange & curious tale of the last true hermit... A great read about Christopher Knight, the man who lived for 27 years in the Maine woods without any human contact...
Mother Nature whacks the environmentalists upside the head again...
Mother Nature whacks the environmentalists upside the head again... Several decades ago, scientists told the world that CFCs were causing the ozone layer to be depleted, resulting in a worldwide band and billions of dollars being spent to replace them with inferior products. About ten years ago, scientists noted that – unexpectedly – the ozone hole was still being formed in some years, despite the elimination of CFCs. Now scientists “belatedly” have discovered that there's apparently a natural source of CFCs, and they're unsure about whether the ban on man-made CFCs accomplished anything at all.
The earth is such a complex, inter-connected system that it's hard to weasel out any hard fact about it. In this case the scientists a few decades back assumed that CFCs in the atmosphere were from man-made sources, because they didn't know any mechanism for such a molecule to be produced naturally. Oops. Bad assumption. Only after billions of dollars were spent on what was essentially an enormous experiment did they learn the truth. We're still spending lots of money on this experiment, as cooling systems across the globe are now running with fluids that are substantially less efficient than CFCs, costing the planet a lot of extra energy consumption.
Almost certainly the ban on CFCs will not be lifted, just as the ban on DDT has not been, despite the shaky science that prompted it. In this case, I'm not at all certain the CFC ban should be lifted – more confirmation would be needed to make me comfortable about reversing it. However, it seems clear that the ban shouldn't have been imposed without a more convincing scientific case having been made...
The earth is such a complex, inter-connected system that it's hard to weasel out any hard fact about it. In this case the scientists a few decades back assumed that CFCs in the atmosphere were from man-made sources, because they didn't know any mechanism for such a molecule to be produced naturally. Oops. Bad assumption. Only after billions of dollars were spent on what was essentially an enormous experiment did they learn the truth. We're still spending lots of money on this experiment, as cooling systems across the globe are now running with fluids that are substantially less efficient than CFCs, costing the planet a lot of extra energy consumption.
Almost certainly the ban on CFCs will not be lifted, just as the ban on DDT has not been, despite the shaky science that prompted it. In this case, I'm not at all certain the CFC ban should be lifted – more confirmation would be needed to make me comfortable about reversing it. However, it seems clear that the ban shouldn't have been imposed without a more convincing scientific case having been made...
Subscribe to:
Posts (Atom)






.gif)
.jpg)
.gif)
.jpg)
.gif)
.jpg)
.gif)
.jpg)
.gif)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
