Monday, April 22, 2013

Best Earth Day Rant Evah...

George Carlin says what I'd like to say, but in a far more entertaining manner than I ever could:

Surprise, Surprise, Surprise!

Progressive pundits are chagrined to discover that the Boston Marathon bombers didn't have valid gun permits.  It was illegal for them to carry weapons.  It was also illegal for them to possess the explosives they used.  Oh, and we're not sure yet whether the guns they used were legally or illegally purchased, but given their status, they were likely illegally purchased as well.

Why are they chagrined? 

Because this rather pointedly displays the utter futility of the stated purpose of gun control laws.  The fact that their weapons and explosives were illegally obtained and used didn't slow down these two terrorists.

Also, there are widespread reports that the weeks events have caused many a Boston-area resident to reconsider their opposition to personally owned weapons.  Reality appears to have slapped them upside the head...

Algorithmic Trading...

Here's a good primer on the basics of algorithmic trading, something that practically every programmer involved in electronic trading considers doing at a personal level.  It's harder than most people think it is!

There's a plug in here for Interactive Brokers, the company that acquired FutureTrade, whom I used to work for...

Drums of Doom...


There are days when I wake up uncertain what country I'm actually living in...

Fly Like a Bird, Fly With a Bird!

Via my mom:

Sunday, April 21, 2013

My Kind of Humor :)


Mark Steyn vs. Political Correctness...

Mr. Steyn is not happy with those who see the world through “Princess Fluffy Bunny” glasses.  A sample:
The politicization of mass murder found its perfect expression in one of those near-parodic pieces to which the more tortured self-loathing dweebs of the fin de civilisation West are prone. As the headline in Salon put it, “Let’s Hope the Boston Marathon Bomber Is a White American.” David Sirota is himself a white American, but he finds it less discomforting to his Princess Fluffy Bunny worldview to see his compatriots as knuckle-dragging nutjobs rather than confront all the apparent real-world contradictions of the diversity quilt. He had a lot of support for his general predisposition. “The thinking, as we have been reporting, is that this is a domestic extremist attack,” declared Dina Temple-Raston, NPR’s “counterterrorism correspondent.” “Officials are leaning that way largely because of the timing of the attack. April is a big month for anti-government and right-wing individuals. There’s the Columbine anniversary, there’s Hitler’s birthday, there’s the Oklahoma City bombing, the assault on the Branch Davidian compound in Waco.” Miss Temple-Raston was born in my mother’s homeland of Belgium, where, alas, there were more than a few fellows willing to wish the Führer happy birthday back when he was still around to thank you for it. But it was news to me it was such a red-letter day in the Bay State. Who knew? At NPR, “counterterrorism” seems to mean countering any suggestion that this might be terrorism from you know, the usual suspects.
But do go read the whole thing!

Saturday, April 20, 2013

Nutella and Bananas...

Yum!  Just do it!

Spies in the Hotel Viru...

The very first time I ever visited Tallinn, Estonia, about 20 years ago back in the early '90s, I stayed in the Hotel Viru.  It was a memorably bad experience.  My bed was a straw-stuffed pallet placed on top of cinder blocks, and that was the highlight.  I stayed in the Hotel Viru again, many years later, and had a much more pleasant experience.

On my first visit there, our Estonian (though ethnic Russian) hosts warned us about the bugging of the Hotel Viru – apparently it was well-known amongst the locals.  Now 20 years later, here I am reading about it in the Smithsonian Magazine!

Horsehead Nebula...

This time, it's not from APOD!


FJ Cruiser: Grommets...

When I installed the roof lights on the FJ Cruiser, I ran the wires back through one of the steel tubes of the roof rack.  At the time, I tried installing rubber grommets and running the wires through them, but that didn't work out at all – the wires couldn't be pushed through the starting grommet (rubber-on-rubber is a lot of friction!), and I couldn't fish them out of the ending grommet (that danged hole was too small!).  So I just ran them through the bare metal, and figured I'd do something afterwards to fix them up.

Grommets (the rubber kind) serve several useful purposes.  They help weatherproof the penetration, though generally grommets aren't completely waterproof on their own.  But the most important thing they do is to keep the wire's insulation from being scraped off by the sharp metal of the penetration.  That's vital, and I didn't want to drive very much without solving that issue.

My first idea was to somehow suspend the wires so they didn't touch the metal, then form some silicone RTV around them.  Once the RTV cured, in effect I would have manufactured a custom (and completely weatherproof) grommet.  But I know from experience that RTV doesn't stand up all that well under full sun and weather exposure, so I searched around and found another similar material that is supposed to handle outdoors exposure better.  This material starts out with the consistency of Duco glue, though – not as viscous as RTV, and therefore not quite as “moldable”.

Then a crazy idea occurred to me.  What if...I took an ordinary rubber grommet and snipped through it, so that I could thread it onto the wire already in place?  Then I should be able to stuff it into the hole, surrounding the wire.  Then I could coat it with this new-fangled sealant and I'd have the best of all worlds.

So I tried it.  Bottom line: it worked.  The details: oh, man, is it a pain in the patoot to stuff a rubber grommet into a hole already occupied by wires!  I used a small flat-blade screwdriver to get enough pressure on it to pop it in, one tiny little piece at a time.  It took me about 20 minutes per grommet to get them in, and I had 6 grommets to do.  Once I had all the grommets in place, sealing them up was easy.  The new sealant seems to stick to the rubber material just fine, and it wicked up all the spaces between the grommets and the wires quite nicely.  Should be watertight now!

Thursday, April 18, 2013

FJ Cruiser: the Rock Rails...


I've been looking forward to installing the rock rails (or “sliders”) on our FJ, as they're one of the things that change the appearance.  I got them on today, as you can see in the photos.  These are the All-Pro APEX “Extreme Duty” rock rails, which I selected based on the many positive reviews I found online.

The folks at All-Pro have consistently been very helpful (perhaps taking pity on me, as they met me when I picked up my order).  This was especially so with the rock rail installation, as I quickly discovered this morning that the instructions didn't seem to match what parts I had.  With a couple of emails, the folks at All-Pro set me straight: the instructions were for their standard rock rails; the APEX rock rails are constructed slightly differently and have a simpler installation.  Once I got myself educated, installing the rails was a snap.  Each rail bolts directly to pre-existing threaded holes in the FJ's frame.  The bolt holes in the rock rails are elongated to provide a little “slop” in the alignment, but in my case none was needed – the fit was perfect.

If you're not familiar with rock rails, they are designed to protect the side of your vehicle should you bang the side into a rock.  This happens most often when your in a place where your vehicle is tilted sideways on rough or slippy-slidey ground.  In these circumstances it's very easy for your vehicle to move a foot or more to one side as you try to drive through the patch.  If there happens to be a bit rock (or wall) next to you, your vehicle might very well end up scraping against it.  I'd much rather scrape these tough, relatively inexpensive rock rails than the thing sheet metal of the body!

FJ Cruiser: New Tailpipe...

The stock FJ Cruiser tailpipe, for some unknown reason, dips down low in the back.  It's perfectly suited for getting snagged on something you just cleared on a rough road – a root, a boulder, etc.

All-Pro makes a replacement tailpipe, which I bought a couple of weeks ago and installed this morning.  It is routed entirely up high, and much straighter than the stock tailpipe.  The photo at right shows the new tailpipe installed (delineated by the red line I drew down its middle).  The shock mount hanger is hard to see, but one of its mounting bolts is pointed to by the blue arrow.

The connection between the muffler and the tailpipe is via a dual bolt flange, which made this job look like it would be super easy – just remove two bolts and the old tailpipe comes out.  But getting those two bolts loose was a major evolution, as they were very tightly in place.  One of them I managed to turn with a socket wrench, using both arms with everything I could put into it.  The second bolt I couldn't move with my arms at all.  I went through some gyrations to get an impact wrench to bear on it, but even that wouldn't budge the bolt!  In desperation, I put an 8" long box wrench on the bolt head, and used my boot to push the wrench using my legs – and that worked, though just barely.  Once I got it to turn an entire turn, then I could work it with my socket wrench.  What a pain!

Fortunately, the new one went in much more easily than the old one came out...

Evolution of Music, a Cappella...

I recognized everything up through the 1970s, and maybe half of the 1980s.  Everything after that was new to me (and didn't make my ears happy!).

When I was a teenager, I was astonished when my parents forbade me from playing Joni Mitchel or Simon & Garfunkel on our family's record player.  It was easier for me to understand why they didn't want to hear Crosby, Stills or Jimi Hendrix.  They must have felt then as I feel today listening to this music of the 2000s...

Makes Me Cry Every Time...

This is the third or fourth video of an Operation Smile patient I've seen.  I cry every time, just trying to imagine the joy brought by this life-changing procedure...

What Happens...

If you wring out a sopping-wet washcloth in zero gravity?  Watch:


On one level, this is a fascinating experiment and a great demonstration of one effect of gravity's absence.

On another level, it's a little sad that NASA has to resort to things like this in its efforts to justify the ISS.  It would be ever so much easier to justify if the ISS was producing exciting, useful, or surprising science results, instead of parlor tricks...

Sprengelia propinqua...

Common name western swampheath, native to Tasmania.  Via BPOD, of course...


Mystery Image...

Chances are that you will not be able to figure out what this image represents.  Even if I told you that it was a heat map.  Even if I told you that the axes represent the integers 1..50 (increasing left-to-right and top-to-bottom).

Give up?

The brighter colors represent smaller numbers, the duller colors larger.  The heat map shows the number of digits in the product of x and y, as expressed in Roman numerals.

Figuring out why there are visual patterns to the result is left as an exercise for the reader.

Yes, this is the work of Nick Berry – who else would it be?

Wednesday, April 17, 2013

House Finch Nest...


On our covered patio, just outside the door to our living room, we have a house finch nest.  The nest looks like it's about to tumble down, though some gentle tugging shows that it's more secure than it looks.  Its position just outside the main entrance to our house means that the poor mother bird is getting disturbed quite a few times a day – she flies away each and every time we use the door.

Yesterday I stuck my iPhone up there to see if there were any eggs.  To my surprise, the nest had five eggs in it.  Taken together, these eggs seem to be about the same size as the mama bird, which seems unlikely.  A little research shows they have between 2 and 6 eggs, though, so this probably isn't all that unusual.

Bowed, But Not Broken...

Check out the photo below, showing a small sheet of 1/2" plywood sitting in the roof rack of our FJ.  I took this photo on Monday, when we were having some rain (about a tenth inch, nothing to get all that excited about).  The sheet was perfectly flat the day before, but look at it now!

The rain hitting the top side of the plywood soaked into the wood, causing it to swell a bit.  The bottom of the plywood remained dry, and therefore didn't swell.  But the swelling is directional – the fibers of wood grow in diameter, but not in length.  The grain of the top ply of this piece toward/away from the position of the camera, so the swelling occurs in the left/right direction.  This swelling caused the bowing in the direction you can see.

Later on, the water soaked down further in the wood, to the next ply.  At that point, the piece warped a bit in both directions, making a very odd-looking piece of wood.

Today (Wednesday) the piece has dried out, and is completely flat again...